our IT guy installed Reporting Services on our test server, but the problem is that I cannot not connect to it. It says the the report services instance coundt not be found. Am I correct in saying that report services needs its own instance?? Cause when I put it on my local computer I gave it its own instance and theres no problems there
View 2 RepliesI have installed 2005 in a new machine with reporting services and configured the reporting services fine. I see the virtual directories fine in IIS but when I try connecting to the report server using IE (http://localhost/reports or http://servername/reports) i get page cannot be displayed errro. When I try connecting using management studio I get the following error
TITLE: Connect to Server
------------------------------
Cannot connect to BLRPTSQL03T.
------------------------------
ADDITIONAL INFORMATION:
The underlying connection was closed: An unexpected error occurred on a receive. (Microsoft.SqlServer.Management.UI.RSClient)
------------------------------
Unable to read data from the transport connection: An existing connection was forcibly closed by the remote host. (System)
------------------------------
An existing connection was forcibly closed by the remote host (System)
------------------------------
BUTTONS:
OK
------------------------------
I donot see any errors in the event logs or the report server logs. Any help with this issue greatly appreciated
I'm getting the following message when I try to connect to Reporting Services. 'The Report Services Instance could not be found'.
Report Services was installed separetly from the Database engine install. I see a reference in the documentation that Reporting Services has to be installed concurrntly with the Database engine. There are also to reporting databases installed. Assuming that this is the problem, is there a way to create the databases and connect to them without uninstalling and reinstalling the components. I've tried using the Database setup in the Reporting Services Configuration utility without success.
Thans,
Tom
All,
While trying to access the Reporting Services in Mng studio.I receive the following error
Cannot Connect To ServerA
Client found response content type of 'text/html; charset=uf-8,but expected 'text/xml'
While trying to access the report on reportmanager.I receive an error."The report server is not responding.Verify that the report server is running and can be accessed from this computer"
Any suggestion?
Hi all,
I am new to reporting services. I have created a report project in SQL Server BIDS. The datasource is SQL Server. I was able to see the preview of the report and could build and deploy the report. But when I try to run the report, it gives me error. So I tried connecting to Reporting Services through SQL Server Management Studio.
There I am unable to connect to the Reporting Services.
I am getting a very long error message. Giving below few lines which made sense to me.
Client found response content type of text/html; charset=utf-8, but expected text/xml.
Parse Error Message : An error occurred loading a configuration file: Access to the path c:Inetpubwwwrootweb.config is denied
I have given full rights to ASPNET, AuthenticatedUsers.
Pl help to resolve this issue.
Thanks,
Tejaswini
I am working with SSRS. I do have admin rights. I can connect to the url https://localhost/Reports and can create the new reports and subscription. Delete the reports and subscriptions.
But when I tried to connect to Reporting Services from SSMS, I am getting below error.
I used the windows authentication. It is showing that the user name or password is not valid or you don't have permission to access this server
I can connect to the database engine and Integration services but unable to connect to the Reporting services.
hi,
I set up Reporting Services about 9 months ago when I installed Microsoft CRM 3 (Dynamics?), but these problems have only just started occurring. Lost count of how many hours have been wasted looking for answers!
Apologies if this rambles on like a cheap book but i don't want to miss out any of the detail..
CRM stops working within an hour of IIS starting up, but if somebody logs in to CRM before it goes down then it's fine for the rest of the day. However the next day it's back to square one. Looking through Event logs it seems to be caused by SQL Reporting Server, because;
Report Server errors show it starting up after IIS, but within an hour throws up "Exception: System.Runtime.Serialization.SerializationException - Message: Unable to find assembly 'Microsoft.ReportingServices.Diagnostics". It's at this point that IIS stops responding altogether, hence CRM stops working.
Running iisreset from the command line makes IIS work again, but this becomes a pain in the backside running it every morning before my colleagues get in. I have set up a schedule to run it for me, which works, but as i said if nobody logs in within the hour (which does happen at least once a week), then CRM won't work until i manually run iisreset again.
Also Reporting Services Configuration Manager does not start properly, so i can't even go through that to see if it's a config problem - when launching it i get an alert box with "An unknown error has occurred in the WMI Provider. Error Code 800706B3". That's with the default server name already in the box, but no matter what server name or IP I try to get it to connect to, it just will not have it. Also that error code seems to be unique to me, since not one webpage exists with the same code.
Other things i've gone through;
- SQL Server Configuration Manager shows everything Running, including Report Server
- SQL Management Studio shows all CRM & Reporting Services databases exist and are online.
- The Report Server error log shows this: "w3wp!library!1!29/03/2008-12:34:00:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ReportServerServiceUnavailableException: The Report Server Windows service 'ReportServer' is not running. The service must be running to use Report Server."
- http://localhost/ works fine.
- http://localhost/Reports/ shows up a .Net error page with Security Exception error: "The application attempted to perform an operation not allowed by the security policy".
- http://localhost/ReportServer/ shows up a page with "localhost/ReportServer - / ---- Microsoft SQL Server Reporting Services Version 8.00.1038.00" which i assume is lacking correct content.
- When CRM was configured the setup wizard moaned that it could not use the existing Reporting Services database or IIS directories, so for that purpose there are two more virtual directories in IIS..
- https://localhost/ReportsSQL/ shows up an error: "Unable to connect to the remote server"
- https://localhost/ReportServerSQL/ shows up an error: "Reporting Services Error - The Report Server Windows service 'ReportServer' is not running. The service must be running to use Report Server. (rsReportServerServiceUnavailable)"
- While trying everything i am logged in as server admin
- Software specs: Windows 2003 Small Business Server (SP2), SQL Server Standard 2005 (9.0.3054 / SP2), all patches from Microsoft Update (not just Windows Update) have been applied.
If you managed to read this far then thank you.. I'm nearly bald with frustration so if someone could please suggest things worth looking into or trying, that would be very much appreciated.
Cheers
Hi,
I'm trying to connect Management Studio to Reporting services on my local machine, but get this message:
Code Snippet
Client found response content type of 'text/html; charset=utf-8', but expected 'text/xml'.
The request failed with the error message:
--
<html>
<head>
<title>Compilation Error</title>
<style>
body {font-family:"Verdana";font-weight:normal;font-size: .7em;color:black;}
p {font-family:"Verdana";font-weight:normal;color:black;margin-top: -5px}
b {font-family:"Verdana";font-weight:bold;color:black;margin-top: -5px}
H1 { font-family:"Verdana";font-weight:normal;font-size:18pt;color:red }
H2 { font-family:"Verdana";font-weight:normal;font-size:14pt;color:maroon }
pre {font-family:"Lucida Console";font-size: .9em}
.marker {font-weight: bold; color: black;text-decoration: none;}
.version {color: gray;}
.error {margin-bottom: 10px;}
.expandable { text-decoration:underline; font-weight:bold; color:navy; cursor:hand; }
</style>
</head>
<body bgcolor="white">
<span><H1>Server Error in '/ReportServer' Application.<hr width=100% size=1 color=silver></H1>
<h2> <i>Compilation Error</i> </h2></span>
<font face="Arial, Helvetica, Geneva, SunSans-Regular, sans-serif ">
<b> Description: </b>An error occurred during the compilation of a resource required to service this request. Please review the following specific error details and modify your source code appropriately.
<br><br>
<b> Compiler Error Message: </b>CS0246: The type or namespace name 'Site' could not be found (are you missing a using directive or an assembly reference?)<br><br>
<b>Source Error:</b><br><br>
<table width=100% bgcolor="#ffffcc">
<tr><td>
</td></tr>
<tr>
<td>
<code><pre>
[No relevant source lines]</pre></code>
</td>
</tr>
</table>
<br>
<b>Source File:</b> c:WINDOWSMicrosoft.NETFrameworkv2.0.50727Temporary ASP.NET Files
eportserver55a9c3a52dd8b450App_Code.7gago72k.0.cs
<b>Line:</b> 19
<br><br>
<br><div class="expandable" onclick="OnToggleTOCLevel1('compilerOutputDiv')">Show Detailed Compiler Output:</div>
<div id="compilerOutputDiv" style="display: none;">
<br><table width=100% bgcolor="#ffffcc">
<tr>
<td>
<code><pre>
C:WINDOWSsystem32> "C:WINDOWSMicrosoft.NETFrameworkv2.0.50727csc.exe" /t:library /utf8output /R:"C:WINDOWSassemblyGAC_32System.Web2.0.0.0__b03f5f7f11d50a3aSystem.Web.dll" /R:"C:WINDOWSassemblyGAC_MSILSystem2.0.0.0__b77a5c561934e089System.dll" /R:"C:WINDOWSMicrosoft.NETFrameworkv2.0.50727Temporary ASP.NET Files
eportserver55a9c3a52dd8b450assemblydl378d258ab 0f57899_d34cc701ReportingServicesWebServer.DLL" /out:"C:WINDOWSMicrosoft.NETFrameworkv2.0.50727Temporary ASP.NET Files
eportserver55a9c3a52dd8b450App_Code.7gago72k.dll" /debug- /optimize+ /w:4 /nowarn:1659;1699 "C:WINDOWSMicrosoft.NETFrameworkv2.0.50727Temporary ASP.NET Files
eportserver55a9c3a52dd8b450App_Code.7gago72k.0.cs" "C:WINDOWSMicrosoft.NETFrameworkv2.0.50727Temporary ASP.NET Files
eportserver55a9c3a52dd8b450App_Code.7gago72k.1.cs"
Microsoft (R) Visual C# 2005 Compiler version 8.00.50727.1318
for Microsoft (R) Windows (R) 2005 Framework version 2.0.50727
Copyright (C) Microsoft Corporation 2001-2005. All rights reserved.
c:WINDOWSMicrosoft.NETFrameworkv2.0.50727Temporary ASP.NET Files
eportserver55a9c3a52dd8b450App_Code.7gago72k.0.cs(19,20): error CS0246: The type or namespace name 'Site' could not be found (are you missing a using directive or an assembly reference?)
</pre></code>
</td>
</tr>
</table>
</div>
<script type="text/javascript">
function OnToggleTOCLevel1(level2ID)
{
var elemLevel2 = document.getElementById(level2ID);
if (elemLevel2.style.display == 'none')
{
elemLevel2.style.display = '';
}
else {
elemLevel2.style.display = 'none';
}
}
</script>
<br><br>
<hr width=100% size=1 color=silver>
<b>Version Information:</b> Microsoft .NET Framework Version:2.0.50727.1318; ASP.NET Version:2.0.50727.1318
</font>
</body>
</html>
<!--
[HttpCompileException]: c:WINDOWSMicrosoft.NETFrameworkv2.0.50727Temporary ASP.NET Files
eportserver55a9c3a52dd8b450App_Code.7gago72k.0.cs(19): error CS0246: The type or namespace name 'Site' could not be found (are you missing a using directive or an assembly reference?)
at System.Web.Compilation.AssemblyBuilder.Compile()
at System.Web.Compilation.BuildProvidersCompiler.PerformBuild()
at System.Web.Compilation.CodeDirectoryCompiler.GetCodeDirectoryAssembly(VirtualPath virtualDir, CodeDirectoryType dirType, String assemblyName, StringSet excludedSubdirectories, Boolean isDirectoryAllowed)
at System.Web.Compilation.BuildManager.CompileCodeDirectory(VirtualPath virtualDir, CodeDirectoryType dirType, String assemblyName, StringSet excludedSubdirectories)
at System.Web.Compilation.BuildManager.CompileCodeDirectories()
at System.Web.Compilation.BuildManager.EnsureTopLevelFilesCompiled()
at System.Web.Hosting.HostingEnvironment.Initialize(ApplicationManager appManager, IApplicationHost appHost, IConfigMapPathFactory configMapPathFactory, HostingEnvironmentParameters hostingParameters)
[HttpException]: c:WINDOWSMicrosoft.NETFrameworkv2.0.50727Temporary ASP.NET Files
eportserver55a9c3a52dd8b450App_Code.7gago72k.0.cs(19): error CS0246: The type or namespace name 'Site' could not be found (are you missing a using directive or an assembly reference?)
at System.Web.HttpRuntime.FirstRequestInit(HttpContext context)
at System.Web.HttpRuntime.EnsureFirstRequestInit(HttpContext context)
at System.Web.HttpRuntime.ProcessRequestInternal(HttpWorkerRequest wr)
-->
--. (Microsoft.SqlServer.Management.UI.RSClient)
------------------------------
Program Location:
at Microsoft.SqlServer.ReportingServices2005.RSConnection.GetSecureMethods()
at Microsoft.SqlServer.ReportingServices2005.RSConnection.IsSecureMethod(String methodname)
at Microsoft.SqlServer.ReportingServices2005.RSConnection.ValidateConnection()
at Microsoft.SqlServer.Management.UI.RSClient.RSClientConnection.CreateConnection(String connectionString)
at Microsoft.SqlServer.Management.UI.RSClient.RSConnectionInfo.CreateConnectionObject()
at Microsoft.SqlServer.Management.UI.RSClient.RSConnectionInfo.RSTypeImpl.GetConnectionObject(UIConnectionInfo ci)
at Microsoft.SqlServer.Management.UI.ConnectionDlg.RSType.GetConnectionObject(UIConnectionInfo ci)
at Microsoft.SqlServer.Management.UI.VSIntegration.ObjectExplorer.ObjectExplorer.ValidateConnection(UIConnectionInfo ci, IServerType server)
at Microsoft.SqlServer.Management.UI.ConnectionDlg.Connector.ConnectionThreadUser()
Anyone got any ideas?
Thanks,
Martin.
Hi.
I have some strange error trying to connect to Reporting Services.
At the beginning I was suspecting some accounts issues.
But after checking all the accounts under wich ASP.NET, SQL SERVER, Reporting Services are running I don't even know what to think.
After searching internet for answers the only similar problems' solutions were remove RS and install it again.
Have anybody here had this problem? Can you just fix something without reinstalling RS? The error is:
Object reference not set to an instance of an object
------------------------------
Program Location:
at Microsoft.SqlServer.ReportingServices2005.RSConnection.GetSecureMethods()
at Microsoft.SqlServer.ReportingServices2005.RSConnection.IsSecureMethod(String methodname)
at Microsoft.SqlServer.ReportingServices2005.RSConnection.ValidateConnection()
at Microsoft.SqlServer.Management.UI.RSClient.RSClientConnection.CreateConnection(String connectionString)
at Microsoft.SqlServer.Management.UI.RSClient.RSConnectionInfo.CreateConnectionObject()
at Microsoft.SqlServer.Management.UI.RSClient.RSConnectionInfo.RSTypeImpl.GetConnectionObject(UIConnectionInfo ci)
at Microsoft.SqlServer.Management.UI.ConnectionDlg.RSType.GetConnectionObject(UIConnectionInfo ci)
at Microsoft.SqlServer.Management.UI.ConnectionDlg.Connector.ConnectorThread()
I have installed 2005 in a new machine with reporting services and configured the reporting services fine. I see the virtual directories fine in IIS but when I try connecting to the report server using IE (http://localhost/reports or http://servername/reports) i get page cannot be displayed errro. When I try connecting using management studio I get the following error
TITLE: Connect to Server
------------------------------
Cannot connect to BLRPTSQL03T.
------------------------------
ADDITIONAL INFORMATION:
The underlying connection was closed: An unexpected error occurred on a receive. (Microsoft.SqlServer.Management.UI.RSClient)
------------------------------
Unable to read data from the transport connection: An existing connection was forcibly closed by the remote host. (System)
------------------------------
An existing connection was forcibly closed by the remote host (System)
------------------------------
BUTTONS:
OK
------------------------------
I donot see any errors in the event logs or the report server logs. Any help with this issue greatly appreciated
I work in an environment where everyone is there own server. I can connect to a collegeau's SQL Server by using the Windows Authentication method in the Database Engine but if I try to connect to the Reporting Services Engine it says that I am not allowed to connect due to permission violations. How do I get adequate permissions to do so? I have all of the components for Reporting Services installed and I am actively using it. I want to be able to test the functionality of the RSScriptor before deploying it out to others.
View 2 Replies View RelatedI have created multiple data sources and datasets in my SSrS project. I created the datasets so I could use them as the basis for reports. However, when I open the wizard to create a new report, I am always asked for a data source, and then have to renter the SQL code that I have stored in one of my datasets. How can I have a report use an existing dataset as it source of data? Otherwise, the datasets I created seem useless . . .
View 5 Replies View RelatedHi,
I'm getting the following error message when I want to connect to reporting services through SQL Server Management Studio. I have also check the reporting services configurations manager for any issues but still can't connect. The http://localhost/reportserver also is down. I also checked if ASPNET account belongs to the Reporting Services security settings and it does. IIS is up and running.
I'm running SQL 2005 Enterprise 64bit with Service Pack 2.
===================================
Cannot connect to ctbbcysql02.
===================================
The request failed with HTTP status 503: Service Unavailable. (Microsoft.SqlServer.Management.UI.RSClient)
------------------------------
Program Location:
at Microsoft.SqlServer.ReportingServices2005.RSConnection.GetSecureMethods()
at Microsoft.SqlServer.ReportingServices2005.RSConnection.IsSecureMethod(String methodname)
at Microsoft.SqlServer.ReportingServices2005.RSConnection.ValidateConnection()
at Microsoft.SqlServer.Management.UI.RSClient.RSClientConnection.CreateConnection(String connectionString)
at Microsoft.SqlServer.Management.UI.RSClient.RSConnectionInfo.CreateConnectionObject()
at Microsoft.SqlServer.Management.UI.RSClient.RSConnectionInfo.RSTypeImpl.GetConnectionObject(UIConnectionInfo ci)
at Microsoft.SqlServer.Management.UI.ConnectionDlg.RSType.GetConnectionObject(UIConnectionInfo ci)
at Microsoft.SqlServer.Management.UI.VSIntegration.ObjectExplorer.ObjectExplorer.ValidateConnection(UIConnectionInfo ci, IServerType server)
at Microsoft.SqlServer.Management.UI.ConnectionDlg.Connector.ConnectionThreadUser()
Any help will be greatly appreciated.
Regards,
Ruaan
I have Configured Configuration settings properly ,
I have did the sMTP settings correctly and I am able to send a mail from db(using send mail task).
I have facing this error since a long while configure the subscription in the ssrs report.
Error: Failure sending mail: The transport failed to connect to the server.
Due to this I am not able to send the subscription in the report..
When I try to connect to the Reporting Services using Microsoft SQL Server Management Studio, the following error message propmpts up:
_____________________________________________________________
ADDITIONAL INFORMATION:
The request failed with HTTP status 401: Unauthorized. (Microsoft.SqlServer.Management.UI.RSClient)
_____________________________________________________________
Is there any settings that I need to do in the "Reporting Services Configuration Manager" ?
Thanks.
Best regards,
Michael Wu
Hi,
View 8 Replies View RelatedI have a web page that contains a ReportViewer control. I am trying to display a report, which is an .rdl file located on the SSRS server, in this Report Viewer control. I have set the ReportPath and ReportServerUrl correctly. I am getting an error message.Am I suppose to use an .rdlc file rather than a .rdl file? Does the web server configuration need to use a certain account? I am getting the following error message:The attempt to connect to the report server failed. Check your connection information and that the report server is a compatible version.
View 4 Replies View RelatedI have created two stored procedures.....
1) atmWonOpportunities_Users
2) atmWonOpportunities_Data (startdate and enddate parameters)
In (1) I created a filtered list of all user names associated with a certain business unit and saved it to a temp table.
in (2) I create a filtered query listing all won opportunities during a period of time (date start and date end paramters)
In the report, I have 3 parameters, startdate, enddate and username (dropdown list).
When I run the report I select a startdate, enddate and username. I click the View Report button and get the same results for any one of the usernames I pick which is wrong.
after installing SQL Server 2008 R2 and the Reporting Services, I've managed to access the Report Manager URL....Reports through the web browser on the machine itself. But if i am trying to connect to on my client browser it does not find the Report Server.Do I need to configure the server in any way? Do I need to configure the firewall?
View 2 Replies View RelatedI am trying to create subscription on report manager.
Getting this error: "Failure sending mail: The transport failed to connect to the server. ".
how to resolve this..
Hello,
I am trying to migrate my reports from SQL server 2000 reporting services 32bit to 2005 64bit. I am following the migration steps that MS specified.
Restored my Reportserver and ReportserverTempDB databases
Then I was using the configure Report services to upgrade these databases but I always end up getting the follwoing exception when I run the upgrade on the "Database Setup" configuration for 'ReportServerTempDB' database
System.Data.SqlClient.SqlException: Could not locate entry in sysdatabases for database 'ReportServerTempDBTempDB'. No entry found with that name. Make sure that the name is entered correctly.
at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)
at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj)
at System.Data.SqlClient.SqlCommand.RunExecuteNonQueryTds(String methodName, Boolean async)
at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(DbAsyncResult result, String methodName, Boolean sendToPipe)
at System.Data.SqlClient.SqlCommand.ExecuteNonQuery()
at Microsoft.ReportingServices.Common.DBUtils.ApplyScript(String connectionString, String script)
at ReportServicesConfigUI.SqlClientTools.SqlTools.ApplyScript(String connectionString, String script)
It's driving me crazy, why is it looking for 'ReportServerTempDBTempDB' in the catalog instead of 'ReportServerTempDB'?
Is it possible to migrate from 32bit to 64bit?
Any help is appreciated
I try to import my SSIS packages which are created using the Business Intelligent studio into SQL server 2005 but I cannot do that.
I am running SQL server 2005 enterprise edition.
Also when i tried to connect to Integration services using Object explorer, it only prompt me for server name. I cannot change the username and password which is disabled.
Then how am i supposed to connect to Integration services on a server in this case?
I'm attempting to obtain a cost effective solution for my existing customers to develop reports on their SQL 2000 Server installations using their Reporting Services 2000. With products like Visual Basic.NET 2003 becoming almost impossible to obtain, I have at least one customer who is running into a dead end.
One option possibly is the SQL Express with Advanced Services download, which has Reporting Services. My questions are as follows:
Can the report designer component of SQL Express Reporting Services be configured to connect to an external database (which would happen to be a SQL 2000 database) to establish its datasets?
Does the resultant designed report end up in an RDL file? If the customer published this report via the Reporting Services 2000 Report Manager, would the report be able to run?
Sorry for asking a question like this that I could probably answer on my own, but my customer needed this answer yesterday. I have scoured the web and microsoft sites - and posted a question on the official SQL Reporting Services cateogy ... in an attempt to answer the basic question of how to design reports for Reporting Services 2000 in the absence of Visual Basic.NET 2003 (or other .NET 2003 tools) with no success.
Thanks to anyone who can help.
-- Mark
I work in a big project and we will begin in using reporting services as the base technique for reports and I will be responsible for this part. but I have a problem I will discuss in the following:
Currently: We use currently devexpress reports and we have 2 languages(Arabic and English). the data in tables saved in two ways (Arabic and English). when the end user change the language of the web site the report data language changed when run it.
Example:
we have table with (ID, NAME_AR, NAME_EN, JobTitle_AR, JobTitle_EN). designed report will display(ID, NAME_EN, JobTitle_EN) . but the end user change the language of the system the report will
dispaly(ID, NAME_AR, JobTitle_AR)
Hint:this done pragmatically
how to do this in reporting services.
Hi There,
Our DBA has installed reporting services on a server and now in order to access the report manager, one has to be an Admin on that Server. I am guessing that there is a mistake in the configuration of Reporting Services. Usually it should allow anybody who was added to the roles in the properties section of the Report Manager, right? I have also added the users to the DB..
Also I am using Windows Authentication to access Report Catalog items (Reporting Services is installed on Server2) from a web Application(deployed on Server1) and displaying the report using report viewer. For some reason, server1 has to be in an Admin role on Server2 to access the report catalog/report. This is kinda strange for me as I don't want everybody to be an Admin on Server2. Can anybody please point in the right direction?
Thanks.
We have installed SQL Server 2005 with reporting services.When tried to open getting errors as below: how to avoid such errors See the end of this message for details on invoking just-in-time (JIT) debugging instead of this dialog box.
ReportServicesConfigUI.WMIProvider.WMIProviderException: A WMI error has occurred and no additional error information is available. ---> System.Runtime.InteropServices.COMException (0x8000000A)
at System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr errorInfo)
[code]...
Hi all,
I have some problem about reporting service add-in.
After I install reporting service add-in for SharePoint, reporting service menu does not appear in Application Management Tab in SharePoint Central Administration.
I try to uninstall and re-install again, it remain not work.
How can I solve this problem?
Thank you very much.
Is there any way to get the report toolbar using SOAP Api in SSRS reporting.
View 6 Replies View RelatedWe've got a requirement to build the real time report. user can browse report at any point of time and need to see the latest data(stock market) in the report.
I've few options down...
1. Directly point to OLTP database as source and write stored procedure to show result set.
2. Replicate the database and write the SP's to reports. To avoid pointing directly to OLTP db.
3. To build the datawarehouse with dim & facts to show it in reports. I prefer this as a standard method, but this would have some latency depending on trasaction load which will differ from the requirement.
HI There
We are required to gather certain information regarding reporting services.
Which reports were requested, by whom , how long did they run for, what parameters were passed etc etc.
I see that the system tables do provide some of this information, is there a 3rd party tool or something we can use to gather all this type of information for us?
This is for reporting services 2000 and 2005.
Thanx
Hi,
I have just install SQL 2005 SP2 and trying to get Window SharePoint Services V3 integrated with SQL 2005 SP2 reporting services.
In SharePoint Central Administration, I select the Reporting Services Integration page and have setup the Report Server Web Service URL and Authentication Mode. I then goto Grant database access, specify the SQL server name, get promted for a username and password that has access SQL Reportserver and get the following error "The group name could not be found"
Does anyone have any ideas?
Thanks
We built our prod server [vm] with SQL Server 2008 R2 on Server 2008 R2. It works nicely. Then we made a copy of the VM and renamed it (so our test environment would be IDENTICAL to production). After that, SSRS was broken: I get "HTTP Error 503. The service is unavailable." I can't connect via http, or SSMS.
We have tried:
* Running SSRS config tool (several times)
* Running with/without the IIS Server Role
* Dropping & recreating the SSRS keys
* Recreating the ReportServer database, etc
* Checking all of the accounts, permissions, etc
* Running SQL Repair
* Going through the registry to fix any references to the machine's old name
* Uninstalling, reinstalling SSRS
* Completely uninstalling ALL of the parts of SQL Server 2008 R2, deleting all directories, removing references to SQL Server from the registry, rebooting, reinstalling everything.
None of this has worked. SSRS [R2] is still 503 on our test box.
the SSRS [NT] service seems to run, without error. The Event Viewer doesn't seem to be recording any errors. The SSRS logs say that the default URL is wrong, but we get the same error in Prod, and Prod works fine. The other SQL Logs say something about not being able to contact the service. However, as I said, the [NT] service seems to be working fine.
I think I've seen a similar post on a blog or on the forums - but it seems like this should be possible -
I have an MDX query - that works fine in SQL Enterprise Manager, and has my dimension members on columns, and my measures on the rows. When I try the same query in Reporting Services, I get the error:
"The query cannot be prepared: The query must have at least one axis. The first axis of the query should not have multiple hierarchies, nor should it reference any dimension other than the Measures dimension..
Parameter name: mdx (MDXQueryGenerator)"
Although it works when you pivot the view, I really need my data presented with the members on the columns and the measures on the rows. Another forum post mentioned using the SQL 9.0 driver, but I can't see this listed anywhere (the only one I see is the .NET framework Data Provider for Microsoft Analysis Services).
Here's what my query looks like -
SELECT
{ [Time].[Month].&[2006-09-01T00:00:00] ,
[Time].[Month].&[2006-10-01T00:00:00],
[Time].[Month].&[2006-11-01T00:00:00],
[Time].[Month].&[2006-12-01T00:00:00]
} on COLUMNS,
{
[Measures].[Unique Users],
[Measures].[UU Pct 1],
[Measures].[UU Pct 2],
} ON ROWS
FROM [Cube]
Any ideas?
Thanks,
Arjun