I have 2 users added ok to SRS and they can see the reports folders etc. when they log on.
But every other user I try to add can only see the header: everything above the line and the Home, My Subscriptions and Help menu links.
Anyone got any idea why?
Thanks
Hi All,
My application uses "crystal reports" control to integrate some reports that can be viewed from within the application.
I'm getting a login failed (due to bad password SQL State 8) error when I bring up the report from within the application. The report runs fine outside the application with the same username password.
- I've checked several times to make sure that I'm passing the correct username/password from the application.
- All letters in the password are lower case. There is not case-sensitive issue.
- I printed the username and password on a pop-up to see what values are passed , and they are correct.
- A single test page that uses the same version of "Crystal Reports" control , using the same username/password, brings up the same report works fine.
I guess , my question is:
Is there a way to trace the login failure event on the SQL Server side to see what is the value of the password that is being sent by crystal reports control?
I'm using Crystal Reports XI with sp2.
SQL Server 2005.
I appreciate the help.
Thanks,
Satish
Hi,
I'm very new to SQL Server, I'm coming from an Oracle background.
I've set up a server with windows authentication but I'm having no luck connectiong to it with Crystal Reports XI.
Can anybody go through the basics with me?
Regards
Sean
Hello SQL Server Experts, Data Analysts, and Report Writers et al:
re: Reporting Options with SQL Server
I wanted to propose an offshoot to the pryor thread:
Would anyone take a stab at comparing Access Reports, Crystal Reports,
Cognos or other options to all the Reporting Services and its components offered as part ofSQL Server, especially as to extracting data from SQL Server into a report format?
I guess this is a far as capabilites, ease of use, limitations, and especially formatting
or presentation of the end report product?
Thank you to all, and I hope this is a beneficial discussion to others.
Hal1490
Hal9000
Hi does anyone know how to do the above with out going through reportserver url?
Preferably by using a cmd tool ? such rs.exe
or through the backend in the reportserver DB?
Thanks
Dave
I have an issue using parameterised reports connecting to Oracle using "ODBC" and "Microsoft OLE DB Provider for Oracle" using parameteried reports. The following error is generated "ORA-01008 not all variables bound (Microsoft OLE DB Provider for Oracle)" and a similiar one for ODBC. It works fine for simple reports. Do these 2 drivers have issues passing parameters for a remote Oracle query?
Thanks.
I have an already published application running several MS SQL Server 2000 Reporting Services report.
I need a way to find from either the reporting services log or the application server (IIS) logs or windows log
to know the frequency of each report being used.
Based on this info, the business needs to know which reports are being used and to what extend?
How can I acheive this?
I have already got the IIS logs and it did not give the required info.
I have looked into the Reporting Services logs but it does not provide the info either.
Any help is appreciated
I have an already published application running several MS SQL Server 2000 Reporting Services report.
I need a way to find from either the reporting services log or the application server (IIS) logs or windows log
to know the frequency of each report being used.
Based on this info, the business needs to know which reports are being used and to what extend?
How can I acheive this?
I have already got the IIS logs and it did not give the required info.
I have looked into the Reporting Services logs but it does not provide the info either.
Any help is appreciated
My site works fine in VWD2008 express, but I get this error when I try to use it on my live website.
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections.
According to this article: http://support.microsoft.com/kb/914277 I am supposed to:
1.
Click Start, point to Programs, point to Microsoft SQL Server 2005, point to Configuration Tools, and then click SQL Server Surface Area Configuration.
Ok, there is no such program in this folder. The only thing in there is "SQL Server Error and Usage Reporting"...
The other thing I am greatly concerned with is this: All is want is for my webpages to be able to access my database for user authentication. I DO NOT want to grant the internet rights to remote connect to my database.
Hi Friends,
Could I migrate the reports which are developed on SQL 2000 to SQL 2005. If Yes then How ...
Could anyone explain me. How it works.
Thanks
sqlferns
My issue is with converting multi-value parameters:
In Crystal Reports, you can set a parameter to accept multiple vales (Discrete, Range or Discrete and Range).
As an example:
I have a database table with a column called ID.
I can create a parameter called param_id and set the options of the parameter to "Allow multiple range values".
With this setup, I can limit the result set of the report by comparing the param_id parameter to the ID column in the database. Because param_id is a multi-value range parameter, I can pass it the following data:
1 - 50
60 - 80
150 - 127
This will only return results within those ranges.
Does anyone know if SSRS provides this kind of functionality?
Thanks,
Patrick Conway
Is there a way to copy reports from other users "My reports" folder? I am logging onto the management studio reporting services using an administrative account and I am able to view the reports from all users' "My Reports" folder. But I am not able to export them as an rdl file. I am able to export reports from other common folders, but not from the "My Reports" folder.
The reason I need to do this is some of the users have created some reports in one environment and the reports are available in their respective "My Reports" folder. I need to move these reports to their corresponding "My Reports" folder in another environment.
Is there a way to do this?
Thanks for your help.
I get the following error and have been trying to figure out why I keep getting it. Initially, I had placed my project under wwwroot folder and ran it under IIS and it gave this error. Then I moved it to my local C drive and same thing. I am sharing this project with two other co-workers and all our config files and code files are same...they don't get this error but I do. I checked that SQL Server Client Network Utility has TCP/IP and the 'Named Pipes' enabled. I thought maybe I have setting in the Visual Studio 2005 that I'm not aware of that's causing this problem...it can't be the server since my co-workers aren't having this error and can't be anything in the code since all of us are sharing this project through vss. I dont' think using different version of .net framework can create this error. I changed the version from 2.0 to use 1.1x and it gave same error... Any help would be greatly appreciated. Thanks in advance.
Server Error in '/RBOdev' Application.
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.SqlClient.SqlException: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below. Stack Trace:
[SqlException (0x80131904): An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)]
System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) +739123
System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) +188
System.Data.SqlClient.TdsParser.Connect(ServerInfo serverInfo, SqlInternalConnectionTds connHandler, Boolean ignoreSniOpenTimeout, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, SqlConnection owningObject) +685966
System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, Boolean ignoreSniOpenTimeout, Int64 timerExpire, SqlConnection owningObject) +109
System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(String host, String newPassword, Boolean redirectedUserInstance, SqlConnection owningObject, SqlConnectionString connectionOptions, Int64 timerStart) +383
System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance) +181
System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance) +170
System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection) +130
System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options) +28
System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject) +424
System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject) +66
System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject) +496
System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) +82
System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) +105
System.Data.SqlClient.SqlConnection.Open() +111
System.Web.DataAccess.SqlConnectionHolder.Open(HttpContext context, Boolean revertImpersonate) +84
System.Web.DataAccess.SqlConnectionHelper.GetConnection(String connectionString, Boolean revertImpersonation) +197
System.Web.UI.WebControls.WebParts.SqlPersonalizationProvider.GetConnectionHolder() +16
System.Web.UI.WebControls.WebParts.SqlPersonalizationProvider.LoadPersonalizationBlobs(WebPartManager webPartManager, String path, String userName, Byte[]& sharedDataBlob, Byte[]& userDataBlob) +195
System.Web.UI.WebControls.WebParts.PersonalizationProvider.LoadPersonalizationState(WebPartManager webPartManager, Boolean ignoreCurrentUser) +95
System.Web.UI.WebControls.WebParts.WebPartPersonalization.Load() +105
System.Web.UI.WebControls.WebParts.WebPartManager.OnInit(EventArgs e) +497
System.Web.UI.Control.InitRecursive(Control namingContainer) +321
System.Web.UI.Control.InitRecursive(Control namingContainer) +198
System.Web.UI.Control.InitRecursive(Control namingContainer) +198
System.Web.UI.Control.InitRecursive(Control namingContainer) +198
System.Web.UI.Control.InitRecursive(Control namingContainer) +198
System.Web.UI.Control.InitRecursive(Control namingContainer) +198
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +692
Version Information: Microsoft .NET Framework Version:2.0.50727.832; ASP.NET Version:2.0.50727.832
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider,
View 2 Replies View RelatedHi,I have SQL Server Express Edition. I tried working out some ASP.NET Labs in my local system. Here is the link of the Virtual Lab which I tried. http://msevents.microsoft.com/CUI/WebCastEventDetails.aspx?EventID=1032286906&EventCategory=3&culture=en-US&CountryCode=USI recieve this error in my local system. An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)I tried working out solutions from various websites. But the no solution is effective. Could anyone help me in solving this issue.
View 1 Replies View RelatedI am trying to connect to a sql server 2005 server using either windows auth or sql server auth but I can not. When I click on the connect button to connect to a server it never connects. I can not cancel once I press connect. It never times out after I press connect. I removed all registered servers that were registered previously. I have uninstalled all software that involved sql server (and sql2000) run a registry cleaner(not microsofts), installed the software to a new directory and still I can not connect to the sql2005 server (the only db).
Any ideas?
I am running Windows XP with latest services packs for both windows and sql server. I have visual studio 2005 installed on my machine and I have had sql express installed on it previously.
Dear All,
I am trying to connect to a remote sql server 2005. So I have install the Microsoft SQL Server Management Studio Express. When I try to connect I get the error below.
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (Microsoft SQL Server, Error: 53). Can some one please help. I have even port no 1533 on my pc. Thanks.
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this
I use Microsoft Windows Vista Home Professional
I have already installed to my computer Microsoft SQL Server 2005 and SQL Serves Express. I used to be successful to connect to the SQL Server but now I CAN NOT.
Not: I try to run SQL Server 2005 but I can not, even I logged on to my computer with an administrator rights. On the other hand I can start and stop the SQL Server Express easily.
As a result, how can I solve this problem.
Thanks in advance.
Bilgin Kılıç
Additional Details
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
My environment:
Home PC
Vista Ultimate
SQL Server Developer 2005
I'm about to go absolutely nuts. I've tried so many things including:
1) Of course making sure Remote connections and both TCP/IP and named pipes are enabled for SQL 2005
2) Verified my connection string works. I even tested it in Enterprise Library using the tool and it connects successfully via windows authentication
3) Made sure of course my logged in user is a member of the administrator group and that my user in SQL 2005 logins has db_owner and full rights to the DB I am connecting to. I also made sure the NT AUTHORITY as well as the 3 sql service users have db_owner rights as well as the adminstrator in the SQL Server logins all have db_owner to the DB
4) Started the SQL Server Browser service, SQL Server DB engine, and SQL Server Agent
5) Made sure my site is setup right in IIS 7. I checked the connection string in there as well as it shows up in IIS7 in one of the sections. Using Windows authentication and it is enabled for my site
6) Tried running the .net site using both localhost (IIS) and also tried using the Visual Studio built-in web server. Both give this message still
Error Details:
Server Error in '/' Application.
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Data.SqlClient.SqlException: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[SqlException (0x80131904): An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)]
System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) +800131
System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) +186
System.Data.SqlClient.TdsParser.Connect(ServerInfo serverInfo, SqlInternalConnectionTds connHandler, Boolean ignoreSniOpenTimeout, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, SqlConnection owningObject) +737554
System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, Boolean ignoreSniOpenTimeout, Int64 timerExpire, SqlConnection owningObject) +114
System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(String host, String newPassword, Boolean redirectedUserInstance, SqlConnection owningObject, SqlConnectionString connectionOptions, Int64 timerStart) +381
System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance) +181
System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance) +173
System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection) +357
System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options) +30
System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject) +424
System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject) +66
System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject) +494
System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) +82
System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) +105
System.Data.SqlClient.SqlConnection.Open() +111
System.Web.SessionState.SqlStateConnection..ctor(SqlPartitionInfo sqlPartitionInfo) +79
[HttpException (0x80004005): Unable to connect to SQL Server session database.]
System.Web.SessionState.SqlSessionStateStore.ThrowSqlConnectionException(SqlConnection conn, Exception e) +227
System.Web.SessionState.SqlStateConnection..ctor(SqlPartitionInfo sqlPartitionInfo) +349
System.Web.SessionState.SqlSessionStateStore.GetConnection(String id, Boolean& usePooling) +285
System.Web.SessionState.SqlSessionStateStore.SetAndReleaseItemExclusive(HttpContext context, String id, SessionStateStoreData item, Object lockId, Boolean newItem) +178
System.Web.SessionState.SessionStateModule.OnReleaseState(Object source, EventArgs eventArgs) +476
System.Web.SyncEventExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() +92
System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) +64
Version Information: Microsoft .NET Framework Version:2.0.50727.1433; ASP.NET Version:2.0.50727.1433
Hi,
I've been trying to fix this error for two days! and I really need the advice of the experts please!
Computer XP Professional Service Pack2, SQL Server 2005 and Visual Studio 2005 (both Standard Edition)
ConnectionString:
<connectionStrings>
<add name="MyConnectionDB" connectionString="Data Source=(MyServerSqlServer2005);Initial Catalog=MyDB;User ID=sa;Password=PasswordforSA" providerName="System.Data.SqlClient" />
</connectionStrings>
C# code
string myConnectionString = ConfigurationManager.ConnectionStrings["MyConnectionDB"].ConnectionString;
SqlConnection myConnection = new SqlConnection(myConnectionString);
myConnection.Open();
Here I get the error: {"An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)"}
What I checked so far:
ServerName and Instance Name OK!
Database, Username and password OK!
SQL Server 2005 Surface Are Configuration - Remote connections using both TCP/IP and Pipe Names OK!
SQL Configuration Manager - Protocolos Enabled (TCP/IP, Pipes, shared) OK!
SQL Server Browse running and active OK!
Am I missing something? I never had this problem with SQL Server 2000 and Visual Studio 2003.
Thanks in advance for any help or suggestion you can give me.
Sasa
Hi All,
After I installed sql server 2005 64bit standard edition on Windows Server Enterprise 2008 64bit, I cannot connect to the sql instance using the sql management studio on the same machine!
I verified that:
service is running,
in surface area configuration: remote connections to local and remote are enabled, for TCP/IP and named pipes.
ran the command netstat -avn| findstr 49279 to make sure that the server is listening.
firewall is off, but this does not matter since I'm connecting locally to local instance
I'm using domain controller account to login to sql server / also tried the sa account.
what else can be wrong?
thanks.
Hi,
I need to connect to a SQL server thats running in say abc.trident.com and also sits in a shared environment..
I have couple of questions
1) That SQL server is accessible from my network, yet when I swtich on my enterprise manager I am unable to view that in the list of running SQL servers in the populated list.
Is it because its sitting in a shared environment I am unable to view that?
2) What is the connection striing I should use to connect to the server..When I try to configure a SQL server registrations it normally asks for SQL Server name along with the user authentication
Should I mention fill the Server: field as
abc.trident.com
or
// abc.trident.com/abc.trident.com
to connect to the clustered server.
Can some one tell me the proper connection string if both aforementioned ones are incorrect?
Thanks in Advance
Hi,
I have a msaccess linked server that I use to execute sql 2000 stored procedures from a front end in adp (access data project) format without any problem, if it is used on the same machine where the sql server resides (with any user logged on). In any other machine on the local network where I also need to use it, I get an ole/db error message saying that the microsoft jet database engine can not open the file because it's allready opened exclusivly or because it do not has permissions. I created the linked server with both UNC and normal path with the same result.
Thank's for all the help/clues you can give me.
Hi,
I've been trying to fix this error for two days! and I really need the advice of the experts please!
Computer XP Professional Service Pack2, SQL Server 2005 and Visual Studio 2005 (both Standard Edition)
ConnectionString:
<connectionStrings>
<add name="MyConnectionDB" connectionString="Data Source=(MyServerSqlServer2005);Initial Catalog=MyDB;User ID=sa;Password=PasswordforSA" providerName="System.Data.SqlClient" />
</connectionStrings>
C# code
stringmyConnectionString = ConfigurationManager.ConnectionStrings["MyConnectionDB"].ConnectionString;
SqlConnection myConnection = new SqlConnection(myConnectionString);
myConnection.Open();
Here I get the error: {"An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)"}
What I checked so far:
ServerName and Instance Name OK!
Database, Username and password OK!
SQL Server 2005 Surface Are Configuration - Remote connections using both TCP/IP and Pipe Names OK!
SQL Configuration Manager - Protocolos Enabled (TCP/IP, Pipes, shared) OK!
SQL Server Browse running and active OK!
No Firewall
Am I missing something? I never had this problem with SQL Server 2000 and Visual Studio 2003.
Thanks in advance for any help or suggestion you can give me.
Sasa
When my default.aspx page loads I get this error for the connection to my SQL 2005 DB. An error has occurred while establishing a connection to the server.
When connecting to SQL Server 2005, this failure may be caused by the fact that
under the default settings SQL Server does not allow remote connections.
(provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL
Server) I have already gone to Surface Area Configuration to ensure that Remoting with both Named Pipes or TCP/IP is enabled and it's set to both for remoting.I verified that my local account has access to the DB.Not sure what else to check.
Hi all.I use Visual Studio .NET 2002 and SQL Server 2005 Express Edition as database.I try to connect to database using server explorer.Test connection is OK. When I done with it and click OK, the message prompt that "Unable to connect to database".So, is it impossible to connect SQL Server 2005 Express Edition using the server explorer?But, the connection is ok when I connect through code cause I can retrieve and update database.
View 2 Replies View RelatedHello
please assist me I will appreciate it
I have a problem in my scripting I gues,I "ve done the config and server registrations and allow a public permission ,but stil giving me trouble
well this is my coding:::::::
<
<script language="vb" runat="server">
Dim MyConnection As SqlConnection
Sub Page_Load(Sender As Object, E As EventArgs)
MyConnection = New SqlConnection("server=(localHost);Database=CampusLANDB;Trusted_Connection=yes")
If Not (IsPostBack)
Dim DS As DataSet
Dim MyCommand As SqlDataAdapter
MyCommand = New SqlDataAdapter("Select distinct State from Authors",MyConnection)
DS=New DataSet()
MyCommand.Fill(DS,"tStudents") ' This is where the pro underlies
MySelect.DataSource=DS.Tables("Name").DefaultView
MySelect.DataBind()
End if
End Sub
sub GetName_Click(Sender As Object,E As EventArgs)
Dim SelectCmd As String = "Select From tStudents Where Name =@Name "
Dim DS As DataSet
Dim MyCommand As SqlDataAdapter
MyCommand = new sqldataAdapter(SelectCmd, MyConnection)
MyCommand.SelectCommand.Parameters.Add(New SqlParameter("@Name",SqlDbType.VarChar,2))
MyCommand.SelectCommand.Parameters("@Name").Value = MySelect.Value
DS= new DataSet()
MyCommand.Fill(DS,"tStudents")
MyDataGrid.DataSource=DS.Tables("tStudents").DefaultView
MyDataGrid.DataBind()
End sub
</script>
and I will apreciate if anyone vcan help me urgently
PPM
I had asked a question last week and I realized that I had phrased it in a misleading way. Within a lab environment at my company, we are experimenting w/ accessing remote SQL data files stored separately on another machine from the SQL server itself (whether it be another client or server).
The experiment is this: You have one client machine accessing a SQL server via Enterprise Manager. The datafiles that you are trying to access are stored on another machine that does not have SQL Server installed. This remote machine only has the datafiles.
Can one map a static path via UNC from the SQL server to the datafiles on the remote machine and then access these datafiles (as long as the user's account has the appropriate permissions to the remote machine)? To my understanding, within SQL server you can only access datafiles that are stored locally on the SQL server itself.
The other thing that I was wondering was if the type of user account had some significance in this situation. More than likely, a local user account would not be able to access the remote machine w/ the datafiles even if the SQL server could map an UNC path and retain it. A domainuser account might be able to do this though.
Any help that you could provide would be appreciated.
Hi Everyone,
I am running into a problem and have been browsing the web and reading nonstop for answers with no success. My company just installed SQL Server 2005 and I am trying to connect to it via SQL Server Management Studio from my network computer in the same office building.
When I browse for Local or Network Servers in the initial popup box at SQL Management Studio Startup, it doesn't show any servers at all. Is there something I need to enable on the Server using the Configuration Manager or one of the other tools to allow my network computer to "see" the SQL Server?
Any insight would be MUCH appreciated. Even a link to a how-to would suffice. Thank you.
Hello,
i tried to connect to a SQL Server Compact Database (version 3.5) with SQL Server Management Studio Express (Version 9.00.3042.00).
But i get the follwing error message (sorry, it's a german message):
.....................................
Es kann keine Verbindung mit 'D:DocumentsVisual Studio 2008Projects\_ProduktivSuperkalibrator_PrototypenSuperkalibrator_PrototypenDatenbankDatabaseTest.sdf' hergestellt werden.
------------------------------
ZUSÄTZLICHE INFORMATIONEN:
Sie versuchen, auf eine ältere Version einer Datenbank von SQL Server Compact Edition zuzugreifen. Falls es sich um eine Datenbank von SQL Server CE 1.0 oder SQL Server CE 2.0 handelt, führen Sie 'upgrade.exe' aus. Falls es sich um eine Datenbank von SQL Server Compact Edition 3.0 oder höher handelt, führen Sie die Komprimierung und Reparatur aus. [ Db version = 3505053,Requested version = 3004180,File name = D:DocumentsVisual Studio 2008Projects\_ProduktivSuperkalibrator_PrototypenSuperkalibrator_PrototypenDatenbankDatabaseTest.sdf ] (SQL Server Compact Edition ADO.NET Data Provider)
.....................................
Is there a solution to manage Compact Databases in Version 3.5?
Thanks!
Stefan Wagner
I have installed Server 2005 Express on a pc running Windows Server 2000 sp4 which I want to use as the server for a network of pcs. However, I am unable to login to SQL Express on this machine from Sql Server Management Studio Express. I am in mixed mode and trying to connect with Server Authentication. I get various error messages none of which seem to point to the problem.
Networked to this pc are several other machines running Xp Professional/Home sp2 and if I install SQL Express on one of these I can log in to SQL Express on that machine without any problem. I can also connect to it via the network from the Win Server 2k machine.
Does anyone know of any issues when installing Server 2005 Express on a pc running Windows Server 2000 sp4.
Any help would be appreciated.
Thanks.
I've run into a problem after upgrading production servers running under Microsoft Cluster Server, Windows Enterprise Server 2003 SP1, and SQL Server 2005 SP1 Enterprise Edition.
Once I completed the upgrade and applied the patch, I needed to examine the values set in the Features component of the Surface Area Configuration tool. The tool attempts to connect to localhostinstancename, but reports the following error:
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error:26 - Error Locating Server/Instance Specified)(Microsoft SQL Server)
I'm logged into the virtual server via Remote Desktop, but the SAC tool thinks I'm logged into the physical server supporting the virtual server. I seem to be caught between a rock and a hard place here, as I can't enable remote connections without first gaining access on the server itself.
Any help will be greatly appreciated.
I have deployed some reports on the reporting server, i have noticed that every one in the domain in which the reports are published can access the reports, except one user. when he tries to access the report he got the following error message or the blank report.
"An error occured during report processing"
"can no read the next data row for the data set dataset1".
Although this user has all the roles on the reporiting server kike browser,content manager etc.
i tried many things but still problem persists.
Can anyone tell me the exact reason for this ?
I shall be extremely thankfull.