Hello,
I have a SQL Task that executes some stored procedure. When a condition is met the stored procedure raises an error by calling RAISERROR (@ErrorMessage,16,1). Following the SQL Task I have Send Mail Task that sends an error email.
I would like to know how to include the @ErrorMessage in the error email.
Thank you,
-Oleg
Is possible to capture the message of error generated in the execution
of a command SQL?
Thanks.
Greetings,
I am creating a package that has many SQL tasks. Each task executes a stored procedure. I need to capture any error messages returned by the stored procedures. Eventually, the error messages will be logged so that we can audit the package and know if individual tasks succeeded or failed.
I'm not sure where or how I can access a stored procedure message. What is the best way?
Thanks,
BCB
Hi
We have set up an SSIS package which goes to an FTP site and downloads files.
Everything is fine... EXCEPT (lol) when there are no files to download. This then fails the task.
However, I want the package to continue to run.
Is there away of assigning the error message given to an expression and then using the expression in the precedence contraint?
thanking you in advance
David
If I want any SQL error message created inside a database to send an error
message is the xp_sendmail the way to go?
I am trying to capture an error message and email to myself whenever the script has an error. I have an email task event handler on OnError and use the variable errormsg as my email body. I have the errormsg variable with a package wide scope defined as string with a value of @[System::ErrorDescription]. Is there anything elso I need to do to make this work?
View 10 Replies View RelatedHello,
Is there a way that I can set up an error handler on a DataFlow so that errant rows within the DataFlow are delivered to a user via email?
I'm looking for Primary Key Violations. In this case, there are two columns of data involved in the DataFlow (AcctCode, RebateRate).
Thank you for your help!
cdun2
I have an SSIS package set up to run various SQL scripts and to notify me if any of the SQL scripts fail. This is working fine, but when I get the email it only says that the script has failed. Is there any way to actually show the SQL result with the error in it? This would save me from having to go and manually run the script again to see the error message.
Thanks
Kate
Exec Prcoess task with source : ftp
destination :ftpunzip
work directory ftpunzip
executable : c:Program FilesWinZip
i am using expressing.
It is doing the unzip but getting this error
package process on server server1 has failed within the Task 'Unzip Files' with the following errors:
>
> File/Process "WZUNZIP.EXE" does not exist in directory "c:Program FilesWinZip".
This is the error message i am getting it
Does anybody know of a way to set up a task which will send an email with an attachment other than using sp_sendmail. Sp_SendMail will run a query and send the results as a text file. But I need to run a stored procedure which generates an Excel spreadsheet then have an email sent with the Excel file as an attachment. The sp_sendmail text file just doesn't work with the information I am generating so I need to find another solution.
Thanks for any help.
I have setup an email notifications system, that basically takes eachrow from a table and sents out an email according to the data in thatrow. The emails get sent, with the subject being filled as expected.Only problem is that sometimes there is no message.Here is the stored procedure that is being called every hour to sendthe emails:CREATE PROCEDURE dbo.RemindersSendEmails AS--CursorDECLARE RemindersCursor CURSOR FORSELECT *FROM RemindersTodaysAndUnsent--Values for cursorDECLARE@I_Reminder_ID bigint,@I_Notice_ID bigint,@V_Reminder_Text varchar(250),@SDT_Reminder_Date smalldatetime,@V_Email varchar(50),@I_Reminder_Type bigint,@SDT_Reminder_Sent smalldatetime,@I_Attempts_Made int,@V_Notice_Type varchar(50),@I_Notice_Period int,@V_Period_Description varchar(50),@I_Project_ID bigint,@V_Notice_Ref varchar(10)--values for sending the mailDECLARE @NEWLINE varchar(2)OPEN RemindersCursorFETCH NEXT FROM RemindersCursorINTO @I_Reminder_ID, @I_Notice_ID, @V_Reminder_Text,@SDT_Reminder_Date, @V_Email, @I_Reminder_Type,@SDT_Reminder_Sent, @I_Attempts_Made, @V_Notice_Type,@I_Notice_Period, @V_Period_Description,@I_Project_ID, @V_Notice_Ref--INTO @I_Reminder_ID, @I_Notice_ID, @V_Reminder_Text,@SDT_Reminder_Date, @V_Email, @I_Reminder_Type,--@SDT_Reminder_Sent, @I_Attempts_Made, @V_Notice_Type,@I_Notice_Period, @V_Period_Description,--@I_Project_ID, @V_Notice_RefSET @NEWLINE = char(10)--PRINT 'start'WHILE @@FETCH_STATUS = 0BEGINDECLARE @EmailMessage varchar(6000), @Subject varchar(100), @StatusintSET @Subject = RTRIM(CONVERT(varchar(8), @I_Reminder_ID)) + ' NoticeAlert - Project ' + RTRIM(CONVERT(varchar(8), @I_Project_ID)) + 'Notice Ref ' + RTRIM(@V_Notice_Ref)SET @EmailMessage = 'Project: ' + RTRIM(CONVERT(varchar(8),@I_Project_ID)) + @NEWLINE +'Notice: ' + RTRIM(@V_Notice_Ref) + @NEWLINE +'Notice Type: ' + RTRIM(@V_Notice_Type) + ' - ' +RTRIM(@V_Period_Description) + @NEWLINE +'Reminder: ' + RTRIM(@V_Reminder_Text) + @NEWLINE + @NEWLINE +'Reminder date: ' + CONVERT(varchar(11), @SDT_Reminder_Date) +@NEWLINE +'Reminder sent: ' + CONVERT(varchar(11), GETDATE()) + @NEWLINE +'Email sent to: ' + @V_Email + @NEWLINE +'Number of attempts made at sending this email (once every hour): '+ CONVERT(varchar(4), @I_Attempts_Made)--@I_Reminder_ID, @I_Notice_ID, @V_Email, @I_Reminder_Type,@I_Notice_Period,PRINT 'subject = ' + @SubjectPRINT 'message = ' + @EmailMessageSET @V_Email = LTRIM(RTRIM(@V_Email))EXEC @Status = master..xp_sendmail @recipients = @V_Email,@message = @EmailMessage,@subject = @Subject--PRINT 'XXXXXXXXXXXXXXXXXXXXXX status = ' + CONVERT(varchar(2),@Status)--If send mail is a successIF (@Status = 0)BEGINUPDATE RemindersSET SDT_Reminder_Sent = GETDATE(), I_Attempts_Made =@I_Attempts_Made + 1WHERE I_Reminder_ID = @I_Reminder_IDEND--Else send mail failedELSEBEGINUPDATE RemindersSET I_Attempts_Made = @I_Attempts_Made + 1WHERE I_Reminder_ID = @I_Reminder_IDEND-- Get the next reminderFETCH NEXT FROM RemindersCursorINTO @I_Reminder_ID, @I_Notice_ID, @V_Reminder_Text,@SDT_Reminder_Date, @V_Email, @I_Reminder_Type,@SDT_Reminder_Sent, @I_Attempts_Made, @V_Notice_Type,@I_Notice_Period, @V_Period_Description,@I_Project_ID, @V_Notice_RefEND--PRINT 'End'CLOSE RemindersCursorDEALLOCATE RemindersCursorGO
View 2 Replies View RelatedHi,I am constructing a Message (Body) for sending our Emails. It is around3000 characters long. But for whatever reason, the last line seems tobe broken with a "!" exclamatory mark in it, which results indisplaying the constructed image path as a broken one.How to resolve this ?. Thanks.Regards,Karthick
View 3 Replies View RelatedHi,
I have define an "execute SQL task" followed by an "Send Email Task" :
http://img171.imageshack.us/img171/449/pic562qn9.gif
http://img171.imageshack.us/img171/1793/pic564jo2.gif
I want to include the package name that is being executed in the message body of the email, How can i do this ?
I have tried to set an output parameter with Variable Name "System:ackageName", but i get the message :
Variable "System:ackageName" cannot be used as an out parameter or return value in a parameter or return value in parameter ....
I used onError event to send email in case ssis pckage fails
but it send multiple email with errordescription. for ex below are the errordescription of four diferent emails i received.
Thread "WorkThread0" has exited with error code 0xC0047039.
An error occurred with the following error message: "The connection "{01AF859A-CF97-4F6C-9C78-1AA4B1C9C27B}" is not found. This error is thrown by Connections collection when the specific connection element is not found.".
Thread "SourceThread0" has exited with error code 0xC0047038.
The PrimeOutput method on component "Flat File Source - Read from source file" (1) returned error code 0xC0202092. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing.
Can anyone suggest if we can combine all this error description and send this as one email.
How do you set up the service broker to process an email message, and how do you format that message and send it to the que.
Can the service broker alos process an html form from a que.
Thanks
I have a table that gets queued up with a list of people for example email, first name, temporary login account and temporary password.How would i create a store procedure to feed these fields into the html message for each record. For example:
Dear <first name>,
Your temporary access is listed below.
Login: <temporary login>
Password: <temporary password>
I am not sure how you insert the data into the html message. It has to be in html because the message has a couple hyperlinks.
Hello everyone,
Please i need your help...
I dont know how to place the field 'strTitle and datBorrowed " in my email? Not as an attachment though....Just write it in the mail as part of message body...
I use this SQL select statement to retrieve the strTitle and datBorrowed fields
strSQL += @"Select replace(strtitle,'[Original Book] - ',''), datBorrowed from tblBooks where convert(varchar(10),datBorrowed,101) = convert(varchar(10),(getdate() - 1),101) ORDER BY strTitle asc";
Now, I have the following code to write the email
static void SendTest()
{
int iEmailLanguage = 0;
MailMessage objMail;
objMail = new MailMessage();
objMail.From = MAIL_FROM;
objMail.To =MAIL_TO;
objMail.Subject = "Books Borrowed Yesterday";
objMail.Body = Dict.GetVal(iEmailLanguage, "EMAIL_MESSAGE");
objMail.Attachments.Add(new MailAttachment(strAttachment));
SmtpMail.SmtpServer = SSMTP_SERVER;
SmtpMail.Send(objMail);
}
And the body of the email is this......
Dict.AddVal(0, "EMAIL_MESSAGE", "*** This e-mail is automatically generated. ***" +
"*** PLEASE DO NOT REPLY TO THIS E-MAIL. ***" +
"" +
"Books Borrowed Yesterday are:" +
"" +
"" +
"Thank you," +
"" +
"eLibrarian" +
"" +
"================================================== ===============" +
"" +
"This e-mail is automatically generated by the Library system." +
"Please do not reply.");
i need to put or wedge the data i got from the SQL Statement into this or after the line "Books Borrowed Yesterday are:" +
So how should i do this?
What I am trying to do, Extract the data from SQL table and Insert in Email Body and email to user. I got good article on Internet, I follow all steps as it is, but still I am getting error.
Here is the link : [URL] ....
But I am getting Error:
Error: System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. ---> System.FormatException: Index (zero based) must be greater than or equal to zero and less than the size of the argument list.
at System.Text.StringBuilder.AppendFormat(IFormatProvider provider, String format, Object[] args)
at System.String.Format(IFormatProvider provider, String format, Object[] args)
at ST_7f59d09774914001b60a99a90809d5c5.csproj.ScriptMain.Main()
[Code] ....
Hi all,
Is there anyway to capture the SQL Server Error and act accordingly?
I donot want sql server to raise an error when a Primary key violation has occured. Instead i want to capture that error(number,description etc) and act
accordingly.
Whats happening is, from the application we are trapping this sql error
and raising it. Instead, if somebody inserts a record which already exists, then we want to trap that error from the sqlprocedure itself and then do an update to that record.
thanks for the help
We use a lot of virtual machines. I have a base VM with SQL 2005 installed. I rename this VM (i have multiple copies running) and run an old application (VB code, iterates through recordsets, etc.).
I get: Microsoft][ODBC SQL Server Driver][SQL Server]Could not find server '2K3VM-DG' in sysservers. Execute sp_addlinkedserver to add the server to sysservers.
This makes sense, and I can fix it with sp_dropserver / sp_addserver [local]. Good.
The next error is puzzling though:
[Microsoft][ODBC SQL Server Driver][SQL Server]The cursor does not include the table being modified or the table is not updatable through the cursor.
Any suggestions on how to fix this?
One of my co-worker told me I can do this to capture errors and insert into error table but when I test it, it doesn't work. Here is what I try to accomplish. SQL 2012. In reality, I have more complicate queries than below.
1. Insert data FROM SourceEmployee INTO Employee table and capture emp_id and error msg insert into dbo.##temperror table
2. Continue on the process until no more record. Basically, skip the error records and do a while loop until end of record.
--DROP TABLE dbo.Employee;
CREATE TABLE [dbo].[Employee]
(
[emp_id] [int] NOT NULL,
[last_name] [varchar](20) NULL,
[first_name] [varchar](15) NOT NULL,
[code]....
How do you include a word with an apostrophe in an SQL in statement without getting an error msg? For example this syntax:
where provname1 IN ('Children's')
With that syntax above, I would get an error message.
Hello,,
I need to capture the primary key violation error:
If e.CommandName = "Insert" Then Dim EmployeeIDTextBox As TextBox = CType(dvContact.FindControl("EmployeeIDTextBox"), TextBox) Dim LastName As TextBox = CType(dvContact.FindControl("LastName"), TextBox) Dim FirstName As TextBox = CType(dvContact.FindControl("FirstName"), TextBox)
Using cmdAdd As New System.Data.SqlClient.SqlCommand
'Establish connection to the database connection Dim sqlcon As New SqlClient.SqlConnection(ConfigurationManager.ConnectionStrings("eConnString").ToString)
'Open connection sqlcon.Open()
'Pass opened connection (see above) to the command object cmdAdd.Connection = sqlcon
'Using "With/End With" pass content to columns from text objects and datatime variables (see above) With cmdAdd .Parameters.Add(New SqlClient.SqlParameter("@EmployeeID", EmployeeIDTextBox.Text)) .Parameters.Add(New SqlClient.SqlParameter("@LastName", LastName.Text)) .Parameters.Add(New SqlClient.SqlParameter("@FirstName", FirstName.Text)) 'Establish the type of commandy object .CommandType = CommandType.Text
'Pass the Update nonquery statement to the commandText object previously instantiated .CommandText = "INSERT INTO ATTEmployee(EmployeeID, LastName, FirstName & _ "VALUES (@EmployeeID, @LastName, @FirstName)" End With
'Execute the nonquerry via the command object cmdAdd.ExecuteNonQuery() '<==Need to capture primaryKey violation, give user message, cancel insert,return to detailView ReadOnly
'I haven't figured out the correct code to capture the primary key violation
EDITMsg.Text="You can not insert an duplicate record. Try Again."
'Close the sql connection sqlcon.Close() End Using End If
Thank you for your help
Hi,
I have a package which has 5 connection managers. One of the Connection Manager has incorrect server name, which results in Package Validation error. Which event handler should be used to run on such errors for OnError Event handler doesnt work @ all.
Thanks
Prasad
I want to capture an error through dynamic query. I have got a link server. I will execute a procedure in database a which will insert data into a table of database b. If while inserting into the table if database b generates an error I have to catch that error in database a and show it.
Please help.
Hi everybody, is anyway to capture error description into variable?
Example
executing
insert into tabMaster(col1) values(1)
select @@error
will produce output
Server: Msg 2627, Level 14, State 1, Line 1
Violation of PRIMARY KEY constraint 'PK_TabMaster'. Cannot insert duplicate key in object 'TabMaster'.
The statement has been terminated.
-----------
2627
(1 row(s) affected)
I want to capture " Violation of PRIMARY KEY constraint 'PK_TabMaster'. Cannot insert duplicate key in object 'TabMaster'."
and assign it to variable
BOL state:... All other parts of the error, such as its severity, state, and message text containing replacement strings such as object names, are returned only to the application in which they can be processed using the API error handling mechanisms
thank you
I want to create a SSIS package as follows
Conditions
If there are about 100 records in text file, if there is an error at 43 and at 67 record respectively , it should capture 43 and 67 record in failure folder and remaining 98 records , should be processed
1) Successful record into table and move the success record from the folder
to new path say( Success folder) (98 records to table)
2) Unsuccessful records to new path (Failure folder) (2 lines )
3) Error message to capture the failed records and store them in another folder(Error log) (2 line failure information)
While writing the 3rd condition to error log table , it has to point out the record which is failed for what reason, say it may be due to invalid data type for column 10 for 43 record, and incorrect syntax error at 67 record.
Hi,
I have a flat file with several rows of entire type in one of the rows a string comes and when it goes away to guard in the BD it falls, since I can know in that this row of the flat file the string?????
I have a public mailbox that gets information mailed to it (in a pre-determined format).
Is there a way for that info to be put into a table in SQL Server without any user interaction (something running on the exchange server)?
I hope I've given enough info.
Thanks for any and all help!
Ron
Hi -
I have an File System Task that copies a file from one directory ot another. When I hard code the target directory (c:dirfile.txt) it works fine. When I change it to a virtual directory (\serverdirfile.txt) I get a security error:
[File System Task] Error: An error occurred with the following error message: "Access to the path '\gracehbtest oS2TMM_Live_Title_000002.xml' is denied.".
Where do I change the security settings?
Thanks - Grace
Let me preface by saying I am not very familiar with SSIS.
Ideally, since the Transfer SQL Server Objects task can do all tables, I would like to use it to copy only data from one server to a new server that has the tables pre-created. When I encounter any kind of error, in addition to the error information provided by SSIS, I also need the actual row data.
If using the Transfer Object task can't do that, how would I loop through all the tables on an OLEDB source and capture the same error information on the destination? I figured out how to do the Data Flow a table with a redirect error output but that does not give me the actual row data.
Hi,
I am trying to write a function which takes a string as input and returns the computed value.
I need to use the output of this function as a coulmn in another select query.
Here is the code (Example: @Equation = '(100*4)+12/272')
create function dbo.calc(@Equation nvarchar(100))
returns float
as
begin
return exec('SELECT CAST('+@Equation+' AS float)')
end
I am getting this error when i compile it
"RETURN statements in scalar valued functions must include an argument"
Any suggestions would be appreciated.
Please respond
Thanks
I'm trying to use an XML Task to do a simple XSLT operation, but it fails with this error message:
[XML Task] Error: An error occurred with the following error message: "There are multiple root elements. Line 5, position 2.".
The source XML file validates fine and I've successfully used it as the XML Source in a data flow task to load some SQL Server tables. It has very few line breaks, so the first 5 lines are pretty long: almost 4000 characters, including 34 start-tags, 19 end-tags, and 2 empty element tags. Here's the very beginning of it:
<?xml version="1.0" encoding="UTF-8"?>
<ESDU releaselevel="2006-02" createdate="26 May 2006"><package id="1" title="_standard" shorttitle="_standard" filename="pk_stan" supplementdate="01/05/2005" supplementlevel="1"><abstract><![CDATA[This package contains the standard ESDU Series.]]></abstract>
There is only 1 ESDU root element and only 1 package element.
Of course, the XSLT stylesheet is also an XML document in its own right. I specify it directly in the XML Task:
<?xml version="1.0" encoding="UTF-8"?>
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform"/>
<xsl:template name="identity" match="@*|node()">
<xsl:copy>
<xsl:apply-templates select="@*|node()"/>
</xsl:copy>
</xsl:template>
<xsl:template match="kw">
<xsl:copy>
<xsl:apply-templates select="@*"/>
<xsl:attribute name="ihs_cats_seq" select="position()"/>
<xsl:apply-templates select="node()"/>
</xsl:copy>
</xsl:template>
</xsl:stylesheet>
Its 5th line is the first xsl:template element.
What is going on here? I do not see multiple root elements in either the XML document or the XSLT stylesheet.
Thanks!