Hey y'all...
Anyone know how to capture SQL Warnings so I can write them to an error log? I can't seem to find any info on it in Books Online...
I can capture the errors just fine by using @@ERROR after a select, but what about warnings such as "Warning: Null value is eliminated by an aggregate or other SET operation."
Thanks!
Hi,
Can someone help me out with capturing the bulk insert error.I have a job which calls a procedure in which I used the bulk insert command .If the bulk insert is failing due to some reason as wrong delimitor,wrong path etc then the job fails.I need to track that error and see that the job doesnt stop and goes onto the next cursor record.
Thanks,
Nodbek
I'm pulling data from Oracle db and load into MS-SQL 2008.For my data type checks during the data load process, what are options to ensure that the data being processed wouldn't fail. such that I can verify first in-hand with the target type of data and then if its valid format load it into destination table else mark it with error flag and push into errors table... All this at the row level.One way I can think of is to load into a staging table then get the source & destination table -column data types, compare them and proceed.
should I just try loading the data directly and if it fails try trouble shooting(which could be a difficult task as I wouldn't know what caused error...)
Hello,
I am applying hourly differential backup to the backup server from production with the following command. This command makes the database on standby server into read only mode.
RESTORE DATABASE ARSYSTEM FROM DISK = 'E:SQL backup from productionsql_full_backup'
WITH MOVE 'arsystem' TO
'd:ardataarsystem.mdf' ,
MOVE 'arsystem_log' TO 'D:ARLOGARsystem' ,
STANDBY = 'E:SQL backup from productionSQL daily diff back up'
Now I want to run a command which will put the database in write mode. I have created a job which would make the datbase Write mode. This job runs successfully sometimes and fails sometimes. I need to ensure that the job always succeeds. When it fails, how do I troubleshoot and what is the possible fix?
Thanks in advance.
The error message is
Cannot apply the backup on device 'E:SQL backup from productionSQL daily diff back up' to database 'ARSYSTEM'. [SQLSTATE 42000] (Error 3136) RESTORE DATABASE is terminating abnormally. [SQLSTATE 42000] (Error 3013). The step failed.
The steps for the job are as follows with the failing step highlighted in bold.
copy /y "\172.31.9.12Remedy BackupackupSQL backupsql_full_backup" "E:SQL backup from productionsql_full_backup"
copy /y "\172.31.9.12Remedy BackupackupSQL backupSQL daily diff back up" "E:SQL backup from productionSQL daily diff back up"
xp_cmdshell 'net stop "bmc remedy action request system server"'
exec rp_kill_db_processes 'ARSYSTEM'
RESTORE DATABASE ARSYSTEM
FROM DISK = 'E:SQL backup from productionsql_full_backup'
WITH
MOVE 'arsystem' TO 'd:ardataarsystem.mdf' ,
MOVE 'arsystem_log' TO 'D:ARLOGARsystem' ,
NORECOVERY
Failing step
RESTORE DATABASE ARSYSTEM
FROM DISK = 'E:SQL backup from productionSQL daily diff back up'
WITH
MOVE 'arsystem' TO 'd:ardataarsystem.mdf' ,
MOVE 'arsystem_log' TO 'D:ARLOGARsystem' ,
RECOVERY
xp_cmdshell 'del /f "E:SQL backup from productionsql_full_backup"'
xp_cmdshell 'del /f "E:SQL backup from productionsql daily diff back up"'
xp_cmdshell 'net start "bmc remedy action request system server"'
I have scheduled the following hourly diffential restore job too which never fails.
RESTORE DATABASE ARSYSTEM FROM DISK = 'E:SQL backup from productionsql_full_backup'
WITH MOVE 'arsystem' TO
'd:ardataarsystem.mdf' ,
MOVE 'arsystem_log' TO 'D:ARLOGARsystem' ,
STANDBY = 'E:SQL backup from productionSQL daily diff back up'
EXEC MASTER..XP_CMDSHELL 'del /f "E:SQL backup from productionSQL daily diff back up"'
i have setup a sql job with 4 steps
1-checkdb
2-indexdefrag
3-sp_updatestats
4-email notification.
if 1,2 success go next step
if 1,2,3 fails go step 4
if 3, 4 success quit with success
if 4 fails quit with failure
i created a script and pasted it in production server and i get this msg:
Warning: Non-existent step referenced by @on_fail_step_id.
Warning: Non-existent step referenced by @on_fail_step_id.
Warning: Non-existent step referenced by @on_fail_step_id.
how can i fix it? I think the error is due to step 4 not executing before calling it from stepe 1,2,3
I have so many warnings in the package which i create and to open a package to takes a very long time..
How do i get rid of the warnings
Warning 2 Validation warning. Tablw1: OLE DB Destination 8 [61186]: Truncation may occur due to inserting data from data flow column "MEMNO" with a length of 255 to database column "MEMNO" with a length of 50. Membership 90-98 Access 2000.dtsx 0 0
In the final oledb dectination of the package i dont connect the error output to error table because they don't have errors
How to proceed with it???
We have a 6 node cluster with 4 SQL Server named instances in the cluster. I am noticing a lot of warnings in the event log with the following information:
Event Type: Warning
Event Source: SQLBrowser
Event Category: None
Event ID: 3
Description:
The configuration of the AdminConnectionTCP protocol in the SQL instance
<instance name> is not valid.
The event occurs for all four instances.
Additional Information:
* OS is Windows 2003 R2 Enterprise x64 Edition w/SP2
* SQL Server 2005 Enterprise Edition w/SP1, hot fix level 2221
* All SQL services runs under the same domain user account
I did some internet searches and found several others who have had this problem. However, I didn't see any solutions. There also seems to be a similar problem with SQL Express but that is not what I am using.
Any thoughts are appreciated.
Hi, Any info will be greatly appreciated to fix this issue.
I am getting the following errors in my event log.
Error: 823, Severity: 24, State: 2
I/O error 2(The system cannot find the file specified.) detected during read at offset 0x00000004f7e000 in file 'F:Program FilesMicrosoft SQL ServerMSSQLDataPENANGwiptrack_targetpng_data2.ndf'.
I am getting these error when I run DBCC:
Server: Msg 8966, Level 16, State 2, Line 1
Could not read and latch page (3:9944) with latch type UP. 2(The system cannot find the file specified.) failed.
Server: Msg 8966, Level 16, State 1, Line 1
Could not read and latch page (3:9945) with latch type UP. 2(The system cannot find the file specified.) failed.
Server: Msg 8966, Level 16, State 1, Line 1
Could not read and latch page (3:9946) with latch type UP. 2(The system cannot find the file specified.) failed.
Server: Msg 8966, Level 16, State 1, Line 1
Could not read and latch page (3:9947) with latch type UP. 2(The system cannot find the file specified.) failed.
Server: Msg 8966, Level 16, State 1, Line 1
Could not read and latch page (3:9948) with latch type UP. 2(The system cannot find the file specified.) failed.
Server: Msg 8966, Level 16, State 1, Line 1
Could not read and latch page (3:9949) with latch type UP. 2(The system cannot find the file specified.) failed.
Server: Msg 8966, Level 16, State 1, Line 1
Could not read and latch page (3:9950) with latch type UP. 2(The system cannot find the file specified.) failed.
Server: Msg 8966, Level 16, State 1, Line 1
Could not read and latch page (3:9951) with latch type UP. 2(The system cannot find the file specified.) failed.
Server: Msg 8966, Level 16, State 1, Line 1
Could not read and latch page (3:10168) with latch type UP. 2(The system cannot find the file specified.) failed.
Server: Msg 8966, Level 16, State 1, Line 1
Could not read and latch page (3:10169) with latch type UP. 2(The system cannot find the file specified.) failed.
Server: Msg 8966, Level 16, State 1, Line 1
Could not read and latch page (3:10170) with latch type UP. 2(The system cannot find the file specified.) failed.
Server: Msg 8966, Level 16, State 1, Line 1
Could not read and latch page (3:10171) with latch type UP. 2(The system cannot find the file specified.) failed.
Server: Msg 8966, Level 16, State 1, Line 1
Could not read and latch page (3:10173) with latch type UP. 2(The system cannot find the file specified.) failed.
Server: Msg 8966, Level 16, State 1, Line 1
Could not read and latch page (3:10174) with latch type UP. 2(The system cannot find the file specified.) failed.
DBCC results for 'PNG_TARGET'.
Server: Msg 8966, Level 16, State 2, Line 1
Could not read and latch page (3:10175) with latch type UP. 2(The system cannot find the file specified.) failed.
Server: Msg 8966, Level 16, State 1, Line 1
Could not read and latch page (3:10176) with latch type UP. 2(The system cannot find the file specified.) failed.
Server: Msg 8966, Level 16, State 1, Line 1
Could not read and latch page (3:10177) with latch type UP. 2(The system cannot find the file specified.) failed.
Server: Msg 8966, Level 16, State 1, Line 1
Could not read and latch page (3:10178) with latch type UP. 2(The system cannot find the file specified.) failed.
Server: Msg 8966, Level 16, State 1, Line 1
Could not read and latch page (3:10179) with latch type UP. 2(The system cannot find the file specified.) failed.
Server: Msg 8966, Level 16, State 1, Line 1
Could not read and latch page (3:10180) with latch type UP. 2(The system cannot find the file specified.) failed.
Server: Msg 8966, Level 16, State 1, Line 1
Could not read and latch page (3:10181) with latch type UP. 2(The system cannot find the file specified.) failed.
Server: Msg 8966, Level 16, State 1, Line 1
Could not read and latch page (3:10182) with latch type UP. 2(The system cannot find the file specified.) failed.
Server: Msg 8966, Level 16, State 1, Line 1
Could not read and latch page (3:10183) with latch type UP. 2(The system cannot find the file specified.) failed.
CHECKDB found 0 allocation errors and 23 consistency errors not associated with any single object.
DBCC results for 'sysobjects'.
There are 215 rows in 10 pages for object 'sysobjects'.
DBCC results for 'sysindexes'.
There are 220 rows in 14 pages for object 'sysindexes'.
DBCC results for 'syscolumns'.
There are 1390 rows in 78 pages for object 'syscolumns'.
DBCC results for 'systypes'.
There are 26 rows in 1 pages for object 'systypes'.
DBCC results for 'syscomments'.
There are 187 rows in 64 pages for object 'syscomments'.
DBCC results for 'sysfiles1'.
There are 4 rows in 1 pages for object 'sysfiles1'.
Server: Msg 8978, Level 16, State 1, Line 1
Table error: Object ID 421576540, index ID 8. Page (1:87967) is missing a reference from previous page (3:10176). Possible chain linkage problem.
Server: Msg 8978, Level 16, State 1, Line 1
Table error: Object ID 421576540, index ID 8. Page (1:88969) is missing a reference from previous page (3:10183). Possible chain linkage problem.
DBCC results for 'syspermissions'.
There are 221 rows in 4 pages for object 'syspermissions'.
DBCC results for 'sysusers'.
There are 255 rows in 4 pages for object 'sysusers'.
DBCC results for 'sysproperties'.
There are 0 rows in 0 pages for object 'sysproperties'.
DBCC results for 'sysdepends'.
There are 570 rows in 8 pages for object 'sysdepends'.
DBCC results for 'sysreferences'.
There are 0 rows in 1 pages for object 'sysreferences'.
DBCC results for 'sysfulltextcatalogs'.
There are 0 rows in 1 pages for object 'sysfulltextcatalogs'.
DBCC results for 'sysfulltextnotify'.
There are 0 rows in 0 pages for object 'sysfulltextnotify'.
DBCC results for 'sysfilegroups'.
There are 1 rows in 1 pages for object 'sysfilegroups'.
DBCC results for 'TblReject'.
There are 396620 rows in 10949 pages for object 'TblReject'.
DBCC results for 'TblBoxGroup'.
There are 22669 rows in 380 pages for object 'TblBoxGroup'.
DBCC results for 'TblCustShipment'.
There are 4425 rows in 83 pages for object 'TblCustShipment'.
DBCC results for 'TblFlowDetail'.
Server: Msg 2533, Level 16, State 1, Line 1
Table error: Page (3:10176) allocated to object ID 421576540, index ID 8 was not seen. Page may be invalid or have incorrect object ID information in its header.
Server: Msg 8980, Level 16, State 1, Line 1
Table error: Object ID 421576540, index ID 8. Index node page (1:90702), slot 10 refers to child page (3:10176) and previous child (3:10177), but they were not encountered.
Server: Msg 2533, Level 16, State 1, Line 1
Table error: Page (3:10177) allocated to object ID 421576540, index ID 8 was not seen. Page may be invalid or have incorrect object ID information in its header.
Server: Msg 8976, Level 16, State 1, Line 1
Table error: Object ID 421576540, index ID 8. Page (3:10177) was not seen in the scan although its parent (1:90702) and previous (1:87966) refer to it. Check any previous errors.
Server: Msg 2533, Level 16, State 1, Line 1
Table error: Page (3:10178) allocated to object ID 421576540, index ID 8 was not seen. Page may be invalid or have incorrect object ID information in its header.
Server: Msg 8980, Level 16, State 1, Line 1
Table error: Object ID 421576540, index ID 8. Index node page (1:90702), slot 13 refers to child page (3:10178) and previous child (3:10179), but they were not encountered.
Server: Msg 2533, Level 16, State 1, Line 1
Table error: Page (3:10179) allocated to object ID 421576540, index ID 8 was not seen. Page may be invalid or have incorrect object ID information in its header.
Server: Msg 8976, Level 16, State 1, Line 1
Table error: Object ID 421576540, index ID 8. Page (3:10179) was not seen in the scan although its parent (1:90702) and previous (1:87967) refer to it. Check any previous errors.
Server: Msg 2533, Level 16, State 1, Line 1
Table error: Page (3:10180) allocated to object ID 421576540, index ID 8 was not seen. Page may be invalid or have incorrect object ID information in its header.
Server: Msg 8980, Level 16, State 1, Line 1
Table error: Object ID 421576540, index ID 8. Index node page (1:90702), slot 14 refers to child page (3:10180) and previous child (3:10178), but they were not encountered.
Server: Msg 2533, Level 16, State 1, Line 1
Table error: Page (3:10181) allocated to object ID 421576540, index ID 8 was not seen. Page may be invalid or have incorrect object ID information in its header.
Server: Msg 8980, Level 16, State 1, Line 1
Table error: Object ID 421576540, index ID 8. Index node page (1:90702), slot 15 refers to child page (3:10181) and previous child (3:10180), but they were not encountered.
Server: Msg 2533, Level 16, State 1, Line 1
Table error: Page (3:10182) allocated to object ID 421576540, index ID 8 was not seen. Page may be invalid or have incorrect object ID information in its header.
Server: Msg 8980, Level 16, State 1, Line 1
Table error: Object ID 421576540, index ID 8. Index node page (1:90702), slot 16 refers to child page (3:10182) and previous child (3:10181), but they were not encountered.
Server: Msg 2533, Level 16, State 1, Line 1
Table error: Page (3:10183) allocated to object ID 421576540, index ID 8 was not seen. Page may be invalid or have incorrect object ID information in its header.
Server: Msg 8980, Level 16, State 1, Line 1
Table error: Object ID 421576540, index ID 8. Index node page (1:90702), slot 17 refers to child page (3:10183) and previous child (3:10182), but they were not encountered.
There are 523629 rows in 9233 pages for object 'TblFlowDetail'.
CHECKDB found 0 allocation errors and 18 consistency errors in table 'TblFlowDetail' (object ID 421576540).
DBCC results for 'TblJob'.
There are 18895 rows in 623 pages for object 'TblJob'.
DBCC results for 'TblRejectDetailCross'.
There are 0 rows in 0 pages for object 'TblRejectDetailCross'.
DBCC results for 'TblStationChkPoint'.
There are 298610 rows in 6273 pages for object 'TblStationChkPoint'.
DBCC results for 'ci_control_TblBoxGroup'.
There are 0 rows in 1 pages for object 'ci_control_TblBoxGroup'.
DBCC results for 'ci_control_TblCustomer'.
There are 0 rows in 0 pages for object 'ci_control_TblCustomer'.
DBCC results for 'TblLine'.
There are 7 rows in 1 pages for object 'TblLine'.
DBCC results for 'ci_control_TblCustShipment'.
There are 0 rows in 1 pages for object 'ci_control_TblCustShipment'.
Server: Msg 8978, Level 16, State 1, Line 1
Table error: Object ID 768057822, index ID 4. Page (1:65650) is missing a reference from previous page (3:9950). Possible chain linkage problem.
Server: Msg 8978, Level 16, State 1, Line 1
Table error: Object ID 768057822, index ID 4. Page (1:80141) is missing a reference from previous page (3:9949). Possible chain linkage problem.
Server: Msg 8978, Level 16, State 1, Line 1
Table error: Object ID 768057822, index ID 4. Page (1:81931) is missing a reference from previous page (3:9948). Possible chain linkage problem.
Server: Msg 8978, Level 16, State 1, Line 1
Table error: Object ID 768057822, index ID 4. Page (1:88745) is missing a reference from previous page (3:9944). Possible chain linkage problem.
DBCC results for 'ci_control_TblDefect'.
There are 0 rows in 1 pages for object 'ci_control_TblDefect'.
DBCC results for 'ci_control_TblFlowDetail'.
There are 0 rows in 1 pages for object 'ci_control_TblFlowDetail'.
DBCC results for 'TblStationQty'.
There are 487814 rows in 8946 pages for object 'TblStationQty'.
DBCC results for 'TblMachine'.
There are 5 rows in 1 pages for object 'TblMachine'.
DBCC results for 'ci_control_TblJob'.
There are 0 rows in 1 pages for object 'ci_control_TblJob'.
DBCC results for 'ci_control_TblJobDetail'.
There are 0 rows in 1 pages for object 'ci_control_TblJobDetail'.
DBCC results for 'TblOperator'.
There are 470 rows in 7 pages for object 'TblOperator'.
DBCC results for 'ci_control_TblLine'.
There are 0 rows in 0 pages for object 'ci_control_TblLine'.
DBCC results for 'TblOperatorGroup'.
There are 22 rows in 1 pages for object 'TblOperatorGroup'.
DBCC results for 'TblTransaction'.
Server: Msg 8978, Level 16, State 1, Line 1
Table error: Object ID 768057822, index ID 4. Page (1:91159) is missing a reference from previous page (3:9945). Possible chain linkage problem.
Server: Msg 8978, Level 16, State 1, Line 1
Table error: Object ID 768057822, index ID 4. Page (1:95791) is missing a reference from previous page (3:9951). Possible chain linkage problem.
Server: Msg 8978, Level 16, State 1, Line 1
Table error: Object ID 768057822, index ID 4. Page (1:857249) is missing a reference from previous page (3:9946). Possible chain linkage problem.
Server: Msg 8978, Level 16, State 1, Line 1
Table error: Object ID 768057822, index ID 4. Page (3:9630) is missing a reference from previous page (3:9947). Possible chain linkage problem.
Server: Msg 2533, Level 16, State 1, Line 1
Table error: Page (3:9944) allocated to object ID 768057822, index ID 4 was not seen. Page may be invalid or have incorrect object ID information in its header.
Server: Msg 8976, Level 16, State 1, Line 1
Table error: Object ID 768057822, index ID 4. Page (3:9944) was not seen in the scan although its parent (1:86516) and previous (3:10996) refer to it. Check any previous errors.
Server: Msg 2533, Level 16, State 1, Line 1
Table error: Page (3:9945) allocated to object ID 768057822, index ID 4 was not seen. Page may be invalid or have incorrect object ID information in its header.
Server: Msg 8976, Level 16, State 1, Line 1
Table error: Object ID 768057822, index ID 4. Page (3:9945) was not seen in the scan although its parent (1:862260) and previous (1:81719) refer to it. Check any previous errors.
Server: Msg 2533, Level 16, State 1, Line 1
Table error: Page (3:9946) allocated to object ID 768057822, index ID 4 was not seen. Page may be invalid or have incorrect object ID information in its header.
Server: Msg 8976, Level 16, State 1, Line 1
Table error: Object ID 768057822, index ID 4. Page (3:9946) was not seen in the scan although its parent (1:2888) and previous (1:39804) refer to it. Check any previous errors.
Server: Msg 2533, Level 16, State 1, Line 1
Table error: Page (3:9947) allocated to object ID 768057822, index ID 4 was not seen. Page may be invalid or have incorrect object ID information in its header.
Server: Msg 8976, Level 16, State 1, Line 1
Table error: Object ID 768057822, index ID 4. Page (3:9947) was not seen in the scan although its parent (1:858889) and previous (1:84220) refer to it. Check any previous errors.
Server: Msg 2533, Level 16, State 1, Line 1
Table error: Page (3:9948) allocated to object ID 768057822, index ID 4 was not seen. Page may be invalid or have incorrect object ID information in its header.
Server: Msg 8976, Level 16, State 1, Line 1
Table error: Object ID 768057822, index ID 4. Page (3:9948) was not seen in the scan although its parent (1:51120) and previous (1:81279) refer to it. Check any previous errors.
Server: Msg 2533, Level 16, State 1, Line 1
Table error: Page (3:9949) allocated to object ID 768057822, index ID 4 was not seen. Page may be invalid or have incorrect object ID information in its header.
Server: Msg 8976, Level 16, State 1, Line 1
Table error: Object ID 768057822, index ID 4. Page (3:9949) was not seen in the scan although its parent (1:81180) and previous (1:79351) refer to it. Check any previous errors.
Server: Msg 2533, Level 16, State 1, Line 1
Table error: Page (3:9950) allocated to object ID 768057822, index ID 4 was not seen. Page may be invalid or have incorrect object ID information in its header.
Server: Msg 8976, Level 16, State 1, Line 1
Table error: Object ID 768057822, index ID 4. Page (3:9950) was not seen in the scan although its parent (1:51120) and previous (1:65448) refer to it. Check any previous errors.
Server: Msg 2533, Level 16, State 1, Line 1
Table error: Page (3:9951) allocated to object ID 768057822, index ID 4 was not seen. Page may be invalid or have incorrect object ID information in its header.
Server: Msg 8976, Level 16, State 1, Line 1
Table error: Object ID 768057822, index ID 4. Page (3:9951) was not seen in the scan although its parent (1:60668) and previous (1:87177) refer to it. Check any previous errors.
Server: Msg 8978, Level 16, State 1, Line 1
Table error: Object ID 768057822, index ID 8. Page (1:921) is missing a reference from previous page (3:10169). Possible chain linkage problem.
Server: Msg 8977, Level 16, State 1, Line 1
Table error: Object ID 768057822, index ID 8. Parent node for page (1:17475) was not encountered.
Server: Msg 8977, Level 16, State 1, Line 1
Table error: Object ID 768057822, index ID 8. Parent node for page (1:55333) was not encountered.
Server: Msg 8977, Level 16, State 1, Line 1
Table error: Object ID 768057822, index ID 8. Parent node for page (1:58600) was not encountered.
Server: Msg 8977, Level 16, State 1, Line 1
Table error: Object ID 768057822, index ID 8. Parent node for page (1:66724) was not encountered.
Server: Msg 8977, Level 16, State 1, Line 1
Table error: Object ID 768057822, index ID 8. Parent node for page (1:73049) was not encountered.
Server: Msg 8977, Level 16, State 1, Line 1
Table error: Object ID 768057822, index ID 8. Parent node for page (1:73183) was not encountered.
Server: Msg 8977, Level 16, State 1, Line 1
Table error: Object ID 768057822, index ID 8. Parent node for page (1:77526) was not encountered.
Server: Msg 8977, Level 16, State 1, Line 1
Table error: Object ID 768057822, index ID 8. Parent node for page (1:80853) was not encountered.
Server: Msg 8977, Level 16, State 1, Line 1
Table error: Object ID 768057822, index ID 8. Parent node for page (1:82680) was not encountered.
Server: Msg 8978, Level 16, State 1, Line 1
Table error: Object ID 768057822, index ID 8. Page (1:83104) is missing a reference from previous page (3:10170). Possible chain linkage problem.
Server: Msg 8977, Level 16, State 1, Line 1
Table error: Object ID 768057822, index ID 8. Parent node for page (1:83310) was not encountered.
Server: Msg 8977, Level 16, State 1, Line 1
Table error: Object ID 768057822, index ID 8. Parent node for page (1:85752) was not encountered.
Server: Msg 8977, Level 16, State 1, Line 1
Table error: Object ID 768057822, index ID 8. Parent node for page (1:87603) was not encountered.
Server: Msg 8977, Level 16, State 1, Line 1
Table error: Object ID 768057822, index ID 8. Parent node for page (1:91416) was not encountered.
Server: Msg 8978, Level 16, State 1, Line 1
Table error: Object ID 768057822, index ID 8. Page (1:91418) is missing a reference from previous page (3:10173). Possible chain linkage problem.
Server: Msg 8977, Level 16, State 1, Line 1
Table error: Object ID 768057822, index ID 8. Parent node for page (1:92037) was not encountered.
Server: Msg 8979, Level 16, State 1, Line 1
Table error: Object ID 768057822, index ID 8. Page (1:92278) is missing references from parent (unknown) and previous (page (3:10168)) nodes. Possible bad root entry in sysindexes.
Server: Msg 8977, Level 16, State 1, Line 1
Table error: Object ID 768057822, index ID 8. Parent node for page (1:94476) was not encountered.
Server: Msg 8977, Level 16, State 1, Line 1
Table error: Object ID 768057822, index ID 8. Parent node for page (1:98109) was not encountered.
Server: Msg 8977, Level 16, State 1, Line 1
Table error: Object ID 768057822, index ID 8. Parent node for page (1:99231) was not encountered.
Server: Msg 8977, Level 16, State 1, Line 1
Table error: Object ID 768057822, index ID 8. Parent node for page (1:100289) was not encountered.
Server: Msg 8977, Level 16, State 1, Line 1
Table error: Object ID 768057822, index ID 8. Parent node for page (1:103626) was not encountered.
Server: Msg 8978, Level 16, State 1, Line 1
Table error: Object ID 768057822, index ID 8. Page (1:104154) is missing a reference from previous page (3:10175). Possible chain linkage problem.
Server: Msg 8977, Level 16, State 1, Line 1
Table error: Object ID 768057822, index ID 8. Parent node for page (1:104303) was not encountered.
Server: Msg 8977, Level 16, State 1, Line 1
Table error: Object ID 768057822, index ID 8. Parent node for page (1:107339) was not encountered.
Server: Msg 8977, Level 16, State 1, Line 1
Table error: Object ID 768057822, index ID 8. Parent node for page (1:110106) was not encountered.
Server: Msg 8978, Level 16, State 1, Line 1
Table error: Object ID 768057822, index ID 8. Page (1:985785) is missing a reference from previous page (3:10174). Possible chain linkage problem.
Server: Msg 8977, Level 16, State 1, Line 1
Table error: Object ID 768057822, index ID 8. Parent node for page (1:989636) was not encountered.
Server: Msg 8977, Level 16, State 1, Line 1
Table error: Object ID 768057822, index ID 8. Parent node for page (1:989637) was not encountered.
Server: Msg 8977, Level 16, State 1, Line 1
Table error: Object ID 768057822, index ID 8. Parent node for page (1:989638) was not encountered.
Server: Msg 8977, Level 16, State 1, Line 1
Table error: Object ID 768057822, index ID 8. Parent node for page (1:989639) was not encountered.
Server: Msg 8977, Level 16, State 1, Line 1
Table error: Object ID 768057822, index ID 8. Parent node for page (1:989640) was not encountered.
Server: Msg 8977, Level 16, State 1, Line 1
Table error: Object ID 768057822, index ID 8. Parent node for page (1:989641) was not encountered.
Server: Msg 8977, Level 16, State 1, Line 1
Table error: Object ID 768057822, index ID 8. Parent node for page (1:989642) was not encountered.
Server: Msg 8977, Level 16, State 1, Line 1
Table error: Object ID 768057822, index ID 8. Parent node for page (1:989643) was not encountered.
Server: Msg 8977, Level 16, State 1, Line 1
Table error: Object ID 768057822, index ID 8. Parent node for page (1:989644) was not encountered.
Server: Msg 8977, Level 16, State 1, Line 1
Table error: Object ID 768057822, index ID 8. Parent node for page (1:989645) was not encountered.
Server: Msg 8977, Level 16, State 1, Line 1
Table error: Object ID 768057822, index ID 8. Parent node for page (1:989646) was not encountered.
Server: Msg 8977, Level 16, State 1, Line 1
Table error: Object ID 768057822, index ID 8. Parent node for page (1:989647) was not encountered.
Server: Msg 8977, Level 16, State 1, Line 1
Table error: Object ID 768057822, index ID 8. Parent node for page (1:989648) was not encountered.
Server: Msg 8977, Level 16, State 1, Line 1
Table error: Object ID 768057822, index ID 8. Parent node for page (1:989649) was not encountered.
Server: Msg 8977, Level 16, State 1, Line 1
Table error: Object ID 768057822, index ID 8. Parent node for page (1:989650) was not encountered.
Server: Msg 8977, Level 16, State 1, Line 1
Table error: Object ID 768057822, index ID 8. Parent node for page (1:989651) was not encountered.
Server: Msg 8977, Level 16, State 1, Line 1
Table error: Object ID 768057822, index ID 8. Parent node for page (1:989652) was not encountered.
Server: Msg 8977, Level 16, State 1, Line 1
Table error: Object ID 768057822, index ID 8. Parent node for page (1:989653) was not encountered.
Server: Msg 8977, Level 16, State 1, Line 1
Table error: Object ID 768057822, index ID 8. Parent node for page (1:989654) was not encountered.
Server: Msg 8977, Level 16, State 1, Line 1
Table error: Object ID 768057822, index ID 8. Parent node for page (1:989655) was not encountered.
Server: Msg 8977, Level 16, State 1, Line 1
Table error: Object ID 768057822, index ID 8. Parent node for page (1:989656) was not encountered.
Server: Msg 8977, Level 16, State 1, Line 1
Table error: Object ID 768057822, index ID 8. Parent node for page (1:989657) was not encountered.
Server: Msg 8977, Level 16, State 1, Line 1
Table error: Object ID 768057822, index ID 8. Parent node for page (1:989658) was not encountered.
Server: Msg 8977, Level 16, State 1, Line 1
Table error: Object ID 768057822, index ID 8. Parent node for page (1:989659) was not encountered.
Server: Msg 8977, Level 16, State 1, Line 1
Table error: Object ID 768057822, index ID 8. Parent node for page (1:989660) was not encountered.
Server: Msg 8977, Level 16, State 1, Line 1
Table error: Object ID 768057822, index ID 8. Parent node for page (1:989661) was not encountered.
Server: Msg 8977, Level 16, State 1, Line 1
Table error: Object ID 768057822, index ID 8. Parent node for page (1:989662) was not encountered.
Server: Msg 8977, Level 16, State 1, Line 1
Table error: Object ID 768057822, index ID 8. Parent node for page (1:989663) was not encountered.
Server: Msg 8977, Level 16, State 1, Line 1
Table error: Object ID 768057822, index ID 8. Parent node for page (1:989664) was not encountered.
Server: Msg 8977, Level 16, State 1, Line 1
Table error: Object ID 768057822, index ID 8. Parent node for page (1:989665) was not encountered.
Server: Msg 8977, Level 16, State 1, Line 1
Table error: Object ID 768057822, index ID 8. Parent node for page (1:989666) was not encountered.
Server: Msg 8977, Level 16, State 1, Line 1
Table error: Object ID 768057822, index ID 8. Parent node for page (1:989667) was not encountered.
Server: Msg 8977, Level 16, State 1, Line 1
Table error: Object ID 768057822, index ID 8. Parent node for page (1:989668) was not encountered.
Server: Msg 8977, Level 16, State 1, Line 1
Table error: Object ID 768057822, index ID 8. Parent node for page (1:989669) was not encountered.
Server: Msg 8977, Level 16, State 1, Line 1
Table error: Object ID 768057822, index ID 8. Parent node for page (1:989670) was not encountered.
Server: Msg 8977, Level 16, State 1, Line 1
Table error: Object ID 768057822, index ID 8. Parent node for page (1:989671) was not encountered.
Server: Msg 8977, Level 16, State 1, Line 1
Table error: Object ID 768057822, index ID 8. Parent node for page (1:989672) was not encountered.
Server: Msg 8977, Level 16, State 1, Line 1
Table error: Object ID 768057822, index ID 8. Parent node for page (1:989673) was not encountered.
Server: Msg 8977, Level 16, State 1, Line 1
Table error: Object ID 768057822, index ID 8. Parent node for page (1:989674) was not encountered.
Server: Msg 8977, Level 16, State 1, Line 1
Table error: Object ID 768057822, index ID 8. Parent node for page (1:989675) was not encountered.
Server: Msg 8977, Level 16, State 1, Line 1
Table error: Object ID 768057822, index ID 8. Parent node for page (1:989676) was not encountered.
Server: Msg 8977, Level 16, State 1, Line 1
Table error: Object ID 768057822, index ID 8. Parent node for page (1:989677) was not encountered.
Server: Msg 8978, Level 16, State 1, Line 1
Table error: Object ID 768057822, index ID 8. Page (1:990949) is missing a reference from previous page (3:10171). Possible chain linkage problem.
Server: Msg 8977, Level 16, State 1, Line 1
Table error: Object ID 768057822, index ID 8. Parent node for page (3:4460) was not encountered.
Server: Msg 2533, Level 16, State 1, Line 1
Table error: Page (3:10168) allocated to object ID 768057822, index ID 8 was not seen. Page may be invalid or have incorrect object ID information in its header.
Server: Msg 8981, Level 16, State 1, Line 1
Table error: Object ID 768057822, index ID 8. The next pointer of (1:83310) refers to page (3:10168). Neither (3:10168) nor its parent were encountered. Possible bad chain linkage.
Server: Msg 2533, Level 16, State 1, Line 1
Table error: Page (3:10169) allocated to object ID 768057822, index ID 8 was not seen. Page may be invalid or have incorrect object ID information in its header.
Server: Msg 8976, Level 16, State 1, Line 1
Table error: Object ID 768057822, index ID 8. Page (3:10169) was not seen in the scan although its parent (1:9152) and previous (1:989626) refer to it. Check any previous errors.
Server: Msg 2533, Level 16, State 1, Line 1
Table error: Page (3:10170) allocated to object ID 768057822, index ID 8 was not seen. Page may be invalid or have incorrect object ID information in its header.
Server: Msg 8976, Level 16, State 1, Line 1
Table error: Object ID 768057822, index ID 8. Page (3:10170) was not seen in the scan although its parent (1:76565) and previous (1:83980) refer to it. Check any previous errors.
Server: Msg 2533, Level 16, State 1, Line 1
Table error: Page (3:10171) allocated to object ID 768057822, index ID 8 was not seen. Page may be invalid or have incorrect object ID information in its header.
Server: Msg 8976, Level 16, State 1, Line 1
Table error: Object ID 768057822, index ID 8. Page (3:10171) was not seen in the scan although its parent (1:925) and previous (1:34912) refer to it. Check any previous errors.
Server: Msg 2533, Level 16, State 1, Line 1
Table error: Page (3:10173) allocated to object ID 768057822, index ID 8 was not seen. Page may be invalid or have incorrect object ID information in its header.
Server: Msg 8976, Level 16, State 1, Line 1
Table error: Object ID 768057822, index ID 8. Page (3:10173) was not seen in the scan although its parent (1:76565) and previous (1:78785) refer to it. Check any previous errors.
Server: Msg 2533, Level 16, State 1, Line 1
Table error: Page (3:10174) allocated to object ID 768057822, index ID 8 was not seen. Page may be invalid or have incorrect object ID information in its header.
Server: Msg 8976, Level 16, State 1, Line 1
Table error: Object ID 768057822, index ID 8. Page (3:10174) was not seen in the scan although its parent (1:985742) and previous (1:80575) refer to it. Check any previous errors.
Server: Msg 2533, Level 16, State 1, Line 1
Table error: Page (3:10175) allocated to object ID 768057822, index ID 8 was not seen. Page may be invalid or have incorrect object ID information in its header.
Server: Msg 8976, Level 16, State 1, Line 1
Table error: Object ID 768057822, index ID 8. Page (3:10175) was not seen in the scan although its parent (1:88169) and previous (1:83978) refer to it. Check any previous errors.
Server: Msg 8977, Level 16, State 1, Line 1
Table error: Object ID 768057822, index ID 8. Parent node for page (3:10339) was not encountered.
There are 4277643 rows in 97804 pages for object 'TblTransaction'.
CHECKDB found 0 allocation errors and 111 consistency errors in table 'TblTransaction' (object ID 768057822).
DBCC results for 'ci_control_TblLot'.
There are 0 rows in 1 pages for object 'ci_control_TblLot'.
DBCC results for 'ci_control_TblMachine'.
There are 0 rows in 0 pages for object 'ci_control_TblMachine'.
DBCC results for 'ci_control_TblOperator'.
There are 0 rows in 1 pages for object 'ci_control_TblOperator'.
DBCC results for 'ci_control_TblOperatorGroup'.
There are 0 rows in 0 pages for object 'ci_control_TblOperatorGroup'.
DBCC results for 'TtmpTransaction'.
There are 0 rows in 0 pages for object 'TtmpTransaction'.
DBCC results for 'TblCPQWeekNbr'.
There are 53 rows in 1 pages for object 'TblCPQWeekNbr'.
DBCC results for 'ci_control_TblPartDetail'.
There are 0 rows in 1 pages for object 'ci_control_TblPartDetail'.
DBCC results for 'TblCPQYearNbr'.
There are 180 rows in 1 pages for object 'TblCPQYearNbr'.
DBCC results for 'TblKitModSNRship'.
There are 472666 rows in 5462 pages for object 'TblKitModSNRship'.
DBCC results for 'ci_control_TblPartSupplier'.
There are 0 rows in 0 pages for object 'ci_control_TblPartSupplier'.
DBCC results for 'TblShift'.
There are 3 rows in 1 pages for object 'TblShift'.
DBCC results for 'ci_control_TblReject'.
There are 0 rows in 1 pages for object 'ci_control_TblReject'.
DBCC results for 'ci_control_TblRejectDetail'.
There are 0 rows in 1 pages for object 'ci_control_TblRejectDetail'.
DBCC results for 'ci_control_TblShift'.
There are 0 rows in 0 pages for object 'ci_control_TblShift'.
DBCC results for 'ci_control_TblStation'.
There are 0 rows in 1 pages for object 'ci_control_TblStation'.
DBCC results for 'ci_control_TblStationChkPoint'.
There are 0 rows in 1 pages for object 'ci_control_TblStationChkPoint'.
DBCC results for 'ci_control_TblStationQty'.
There are 3 rows in 1 pages for object 'ci_control_TblStationQty'.
DBCC results for 'ci_control_TblTester'.
There are 0 rows in 0 pages for object 'ci_control_TblTester'.
DBCC results for 'ci_control_TblTransaction'.
There are 0 rows in 1 pages for object 'ci_control_TblTransaction'.
DBCC results for 'TblCustomer'.
There are 7 rows in 1 pages for object 'TblCustomer'.
DBCC results for 'TblTester'.
There are 16 rows in 1 pages for object 'TblTester'.
DBCC results for 'ci_control_TblKitModSNRship'.
There are 0 rows in 1 pages for object 'ci_control_TblKitModSNRship'.
DBCC results for 'ci_control_TblSystemBuild'.
There are 1 rows in 1 pages for object 'ci_control_TblSystemBuild'.
DBCC results for 'TblRejectDetail'.
There are 104402 rows in 2403 pages for object 'TblRejectDetail'.
DBCC results for 'TblJobDetail'.
There are 1107946 rows in 23608 pages for object 'TblJobDetail'.
DBCC results for 'TblPartSupplier'.
There are 79 rows in 1 pages for object 'TblPartSupplier'.
DBCC results for 'TblDefect'.
There are 21113 rows in 337 pages for object 'TblDefect'.
DBCC results for 'png_ci_TblRowCount'.
There are 24 rows in 1 pages for object 'png_ci_TblRowCount'.
DBCC results for 'TblTbSetup'.
There are 1 rows in 1 pages for object 'TblTbSetup'.
DBCC results for 'TblStationQty1'.
There are 61755 rows in 974 pages for object 'TblStationQty1'.
DBCC results for 'TtmpStationProdLoad'.
There are 57 rows in 1 pages for object 'TtmpStationProdLoad'.
DBCC results for 'TblPartDetail'.
There are 3053 rows in 93 pages for object 'TblPartDetail'.
DBCC results for 'TblLot'.
There are 515677 rows in 11268 pages for object 'TblLot'.
DBCC results for 'TblStation'.
There are 474 rows in 11 pages for object 'TblStation'.
DBCC results for 'TblSystemBuild'.
There are 128623 rows in 2362 pages for object 'TblSystemBuild'.
DBCC results for 'dtproperties'.
There are 0 rows in 1 pages for object 'dtproperties'.
DBCC results for 'TblEqMaster'.
There are 0 rows in 1 pages for object 'TblEqMaster'.
DBCC results for 'TblEqMasterSNRShip'.
There are 0 rows in 1 pages for object 'TblEqMasterSNRShip'.
CHECKDB found 0 allocation errors and 152 consistency errors in database 'PNG_TARGET'.
repair_allow_data_loss is the minimum repair level for the errors found by DBCC CHECKDB (PNG_TARGET ).
DBCC execution completed. If DBCC printed error messages, contact your system administrator.
Hi. I'm Sara Cushman, a reporter for SearchDatabase. We're doing a story about the latest round of SQL server security warnings and patches.
How did you handle the situation? Did you drop everything else and deal with it? How did it compare with other SQL Server problems you have had? Were you able to handle it in a way that you feel left you without any vulnerabilities? If you haven't dealt with it, what are you waiting for?
We're looking for DBAs to share their stories. If you have some, reply here or email me at scushman@techtarget.com so that I can get in touch with you.
Thanks!
Is there a way to disable warnings in ssis? I'm using a third part tool to call an ssis and when the ssis give a warning the tool is showing failure.
View 1 Replies View RelatedRao Aregaddan writes "Hi All,
Here is my Query.....
While executing the following code,it is showing some warnings.
SET QUOTED_IDENTIFIER OFF
GO
SET ANSI_NULLS ON
GO
SET ANSI_WARNINGS ON
GO
Drop procedure [DBO].[Usp_Extract_OLAP_Data_1]
GO
Create Procedure [DBO].[Usp_Extract_OLAP_Data_1] as
begin
IF EXISTS (SELECT * FROM DBO.SYSOBJECTS WHERE ID = OBJECT_ID('[DBO].[processed_olap_data_1]') AND OBJECTPROPERTY(ID, N'ISUSERTABLE') = 1)
DROP TABLE [DBO].[processed_olap_data_1]
select * into dbo.processed_olap_data_1 from pubs.dbo.processed_olap_data_1
EXEC ('ALTER TABLE dbo.processed_olap_data_1 ADD generatedid INT IDENTITY')
select * from processed_olap_data_1 order by generatedid
END
GO
SET QUOTED_IDENTIFIER OFF
GO
SET ANSI_NULLS OFF
GO
SET ANSI_WARNINGS OFF
GO
Out Put is as follows
----------------------
(141 row(s) affected)
(141 row(s) affected)
Warning: The table 'processed_olap_data_1' has been created but its maximum row size (3873071) exceeds the maximum number of bytes per row (8060). INSERT or UPDATE of a row in this table will fail if the resulting row length exceeds 8060 bytes.
(141 row(s) affected)
Please guide me on this issue that why iam getting this warning even i set the ansi null and ansi warnings off.
one more thing is that is there any other way to add an
identity column with out using alter statement.and is there any problem with front end guys if it shows like this warnings..."
Hi! guys,I have a SQL agent job fails because it gets 10 warnings when it runsa stored procedure. These warnings are trivial and can be ignored. CanI make it ignore these warnings and proceed? I think there is somesetting I can do to change the default behavour of an agent jobregarding warnings but I just don't know how to do it.Any idea?Thanks,Gary
View 12 Replies View RelatedHi,
I would like to get a list of all the unused columns, I have tons of files and fields in the package probably in the hundreds and I need to know which fields I am not using to see which fields are important not to miss out, so is there any way I can get them in a text file or any other format?
Thanks
Hello,
I am creating a 2005 SSIS Package with multiple data flows with source data based on the XML Source and a XSD Schema that we have created. These data flows load data from XML into different tables in our data warehouse for order data so the XSD Schema has several hierarchies. Because each data flow loads data into one table (I broke it out this way to make the package easier for readability and maintance) and the source for each is based on the XSD hierarchies I receive numerous warnings similar to the following; "Warning: 0x80047076....Removing this unused output column can increase Data Flow task performance." that I would like to remove. However, when I un-check the box to remove those output columns (which leaves several hierarchies without output columns) I then receive a error similar to the following; "Error: 0xC00470B9 at ....contains no output columns. An asynchronous output must contain output columns."
So the question is how to remove the numerous remove column warnings? I have thought about creating one XML schema for each dataflow, breaking the data flows into different packages, etc. but I am still not exaclty sure how to remove the warnings which should increase the speed of the package overall. Thank you!
I don't have direct access to the SQL server. I have to write/read through a class I recieved from the IT department. The class also had an example in it but I can't get it to work correctly.
I get an error: Object reference not set to an instance of an object. Line 35
Dim clsWDD As New WebDevDB.WebDevDB
Dim intLeng As Int32
Dim intLock As Int32
Dim strAppl As String = "MyApplication"
Dim strData As String = "This is my text data!"
Dim strFile As String = "MyFile"
intLock = clsWDD.LockTextFile(strAppl, strFile) 'line 35
intLeng = clsWDD.WriteTextFile(strAppl, strFile, strData, WriteAction.Create)
intLock = clsWDD.UnlockTextFile(intLock)
I was just going through the default trace files and see full of sort warnings, missing join predicates and hash warnings. The server behaved weirdly last night with queries longer than usual time and the server started choking. I didn't find any info from error logs or event viewer.
View 3 Replies View Related
Hi,
I am trying to import from Excel file. So In between Excel file source and OLEDB destination I am using One Data Transformations to convert excel unicode characters to Sqlserver varchar.
Iam getting this following errors:
1)
Error: 0xC020901C at Data Flow Task, OLE DB Destination [382]: There was an error with input column "Copy of Zip" (615) on input "OLE DB Destination Input" (395). The column status returned was: "The value could not be converted because of a potential loss of data.".
Copy of zip is the Data Transformation column mapped Sqlserver Varcahr(200) column of Zipcode.
In excel file the Zip codes are like this:
78712-2344
78123
12345
87651-1234
2)
The column "State" needs to be updated in the external metadata column collection.
This is warning. This type of warnings are for all columns in excel file.
3) Intially I declared the Sqlserver table columns like this Varchar(100), then SSIS showing some warning like truncation of column State 255 characters to .. So I changed columns datatype from Varchar(100) to Varchar(500)? Why we need to change like this.
Thanks in advance
Hi,
I am getting unusable warnings from dataflow task while running. Say for example I am getting column A, B, C from source and I am using only column C in destination. Whenever I run the package, I am getting a warning saying that
"The output column "A" (67) on output "Output0" (5) and component "Data Flow Task" (1) is not subsequently used in the Data Flow task. Removing this unused output column can increase Data Flow task performance."
Can any one help me how to resolve these warnings?
Thanks in advance.
Hi,
Is there a way of stopping truncation warnings due to the fact the the XL driver assumings BSTR(255) columns. I'm loading data from excel to SQL Server, the SQL Server columns are nvarchar(50) but the Excel source has assumed 255.
I can change the Excel Source using the 'Advanced Editor' and change the meta-data of the 'Output Column', but then there's a mismatch between the External Column and Output Column collection - so a warning is displayed.
The External Column meta-data can be changed, but then it's out of sync with the 'Error Output' meta-data (and the Error Output meta-data is read only).
I'm sure I've missed a step, can anyone enlighten me
Dave
Hi,
I have a custom component that compiles just fine on one environment. I copied and pasted the code to another environment and now I'm getting compilation warnings:
Warning 1 CA1014 : Microsoft.Design : '*******.Seer.Ssis.Common' should be marked with CLSCompliantAttribute and its value should be true. *******.Seer.Ssis.Common
Warning 2 CA1705 : Microsoft.Naming : Correct the capitalization of type name 'PPDMDataLineageComponent'. C:PROJECTSSeerCode*******.Seer.Ssis.CommonPPDMDataLineageComponent.cs 13 Chevron.Seer.Ssis.Common
Warning 3 CA1062 : Microsoft.Design : Validate parameter 'buffer' passed to externally visible method PPDMDataLineageComponent.ProcessInput(Int32, PipelineBuffer):Void. C:PROJECTSSeerCode*******.Seer.Ssis.CommonPPDMDataLineageComponent.cs 99 Chevron.Seer.Ssis.Common
Any ideas?
Thanks in advance
-Jamie
how to write a error logs in notepad in sql server 2008
View 3 Replies View RelatedWhen running a stored procedure, how can i retrieve the warnings that are issued within the stored procedure?
the code used is below,
the jdbc is connecting fine, it is running the stored procedure, but when an error is raised in the stored procedure, it is not coming back into s.getwarnings()
warning raised in stored proc with
Code Block
RAISERROR ('Error', 16, 1)with nowait;
there are no results for the stored procedure, I am just wanting to get the warnings
Code Block
Class.forName("com.microsoft.sqlserver.jdbc.SQLServerDriver");
Connection con = DriverManager.getConnection("jdbc:sqlserver://localh...........);
CallableStatement s = con.prepareCall("{call procedure_name}");
s.execute();
//running in seprate thread
SQLWarning warn = s.getWarnings();
while (m.running) {
if(warn == null) {
warn = s.getWarnings();
}
safeOut(warn);
if(warn != null)
warn = warn.getNextWarning();
m.wait(100);
}the code is not complete, but should show what is happening
it is continually outputting null for the warning, though the strored proc is definately raising errors, which is proven by running it in a query window in sql server.
it is retreiving warning if the statement is a raiseerror instead of a call to the proc
Code Block
CallableStatement s = con.prepareCall("RAISERROR ('Error', 1, 1)with nowait;");
this thread is quite related, but doesnt offer a working solution
Getting messages sent while JDBC Driver calls stored procedure
any help much appreciated,
thankyou
Simon
hi!
i am trying to execute through command line the following:
dtexecui /SQL "ArchiveMain" /SERVER "SE413695AASQL2005" /WARNASERROR /MAXCONCURRENT " -1 " /CHECKPOINTING OFF
I am actaully creating an archiving package.
1. All it does is get some data from the Table.
2. creating directory and set usedirectoryifexist = true
shows some warning when i run that directory already exists cos i don't want to create new one i want to use the existing one.
3. actual archiving to get call to another package for archiving - warning while running the package that parent variable is missing
The pacakge seems to run while i execute it thorugh command prompt but i get this message
DTExec: The package execution returned DTSER_SUCCESS (0) but had warnings, with
warnings being treated as errors!
Thanks,
Jas
I have a manager SSIS package that calls a generic loader SSIS package, via the 'Execute Process Task'. The manger package (amongst other things) creates a config file and and then executes DTExec passing the config specification in the Arguments property, i.e. '
'/FILE "D:AudiencePackagesUKDW_Core_Loader_Persist.dtsx" /CONFIGFILE "D:AudienceDataSCPmystery.dtsconfig" /MAXCONCURRENT " -1 " /CHECKPOINTING OFF"
It works as expected, but, I always get the warning message 'File/Process "DTExec" is not in path.', I know that it is because the exe runs and loads the correct package which then performs the correct actions.
Have I dropped the ball here? I cannot see any reason for the warning as DelayValidation==True, I could set RequireFullFileName==True, but I do not know where SQL is installed on the various nodes.
Any input would be warmly received
Thanks
I am trying to backup two 40 GB database on server A and server B.
Server A is SAN attached and has 70GB free space for the backup.
Server B is NOT SAN attached and uses a local drive with 113GB free space.
Both backup's result in the same problem. The below is an extract from sql server log file regarding the errors.
Code Block12/18/2007 12:24:01,spid64,Unknown,BackupDiskFile::OpenMedia: Backup device 'H:MSSQL.1BackupfiveDWfiveDWfiveDW_backup_200712181200.bak' failed to open. Operating system error 2(error not found).,
12/18/2007 12:24:01,spid64,Unknown,Error: 18204<c/> Severity: 16<c/> State: 1.,
12/18/2007 12:23:54,Backup,Unknown,BACKUP failed to complete the command BACKUP DATABASE fiveDW. Check the backup application log for detailed messages.,
12/18/2007 12:23:54,Backup,Unknown,Error: 3041<c/> Severity: 16<c/> State: 1.,
12/18/2007 12:23:54,spid64,Unknown,BackupMedium::ReportIoError: write failure on backup device 'H:MSSQL.1BackupfiveDWfiveDWfiveDW_backup_200712181200.bak'. Operating system error 33(error not found).,
12/18/2007 12:23:54,spid64,Unknown,Error: 18210<c/> Severity: 16<c/> State: 1.,
Please note timings in log extract.
All help is appreciated
Thanks, Chris
I need to first capture the max version associated with a file name here is the meat
SELECT
fileName,
f.folderName,
masterID,
iterationId,
iterationNumber version
FROM
fileIteration fi
JOIN iteration i on (i.iterationID = fi.fileIterationID)
JOIN vw_folderFileLink fl on (fl.fileMasterID = i.masterID)
JOIN folder f on (f.folderID = fl.folderID)
WHERE
fileName LIKE '429020652.idw'
--GROUP BY masterID, fi.FileName, f.FolderName, fileName, i.iterationID
ORDER BY masterID, version DESC
--*******end code ********--
that returns these results:
429020652.idwSubPumps71575217
429020652.idwSubPumps71575116
429020652.idwSubPumps71574975
429020652.idwSubPumps71574654
429020652.idwSubPumps71573983
429020652.idwSubPumps71573142
429020652.idwSubPumps71573131
First I need help just getting that top row but then I need to get all expect the top row selected.. I've tryed using MAX in several ways but I'm not getting what i want here :/ any help is appreciated
Hi,
As I was developing my SSIS package, I created several variables and tasks ( FTP, WMI Reader Task ). I am now cleaning up, deleting unwanted variables and connections in the design window. I save and build the package and when I load the package, I get warnings that these variables are referenced but can't find them and errors that the WMI connection is not found.
When a package calls a sub-package, it stores the absolute path of the child package in its dtsx xml file in a Connection String property. How annoying !!! . When I deploy this to another machine with a different file structure, it becomes a problem. Why can't it store the path relative to the parent package, which would be typically in a sub-directory under the parent ?
These last 2 days have been nothing but frustration and my deadline is slipping. Any help is appreciated.
Thx,
-chiraj.
Hi-I've been trying to install SS2K Hot Fix # 818095 for one of my clientsand it keeps terminating - the Log for the install contains an errormessage that reads "...dbmslpcn.dll is WRITE LOCKED".I stopped all but a few of the services on the box, but still can'tseem to get it installed.Any suggesions??Thanks in advance for any help on this issue, it's been a royal PITA!Pete
View 1 Replies View RelatedHi,
I am back with one more problem..
I have created few reports using SSRS 2005. I am using Oracle database in Data Source to fetch my data. It is working fine and showing me report correctly. But after running the report 8 to 10 times, it starts giving me Memory error. To get rid of that, I need to recycle (stop-start) ReportingService from IIS.
I am exactly getting following error...
Attempted to read or write protected memory. This is often an indication that other memory is corrupt.
I am not getting the actual problem, why is it giving memory error only after running few times? Please let me know if anyone facing same problem or knowing the solution for the problem.
Thanks,
HMaheta
I cannot seem to get my flat file to write columns in error when inserting into a SQL table. I have tried a few examples from MS and did not get anything written to my flat file output. I have set the Source Error Output on this flat file and it uses a script task to created the error description and then write it to a Flat File Destination.
I am new to SSIS and have not had any formal training on it. However, I am very familiar with VS.Net/c# and SQL 2000 DTS - I need to get this working ASAP as there are 45 total flat files that need to be processed. Once I have this solved for one, the rest will follow suit.
If more details would help, I can provide them.
Kind Regards,
Ron
Hi all,
I am new to .NET, after many years with classic ASP I am struggling a little with something that I am sure is really easy to do.
Basically what I want to do, is execute an SQL statement, that will return a single value. I then need to store this value as a variable, so that I can pass it into another query later.
It seems easy to output the record, but how do I store it as a variable !!
This is my code to connect and run the SQL... all I need to do as retreive the value, and put it aganist a variable....
Function higher_manager_ein() As System.Data.IDataReader
Dim connectionString As String = "server='myserver'; user id='userid'; password='pwd'; database='DB'"
Dim dbConnection As System.Data.IDbConnection = New System.Data.SqlClient.SqlConnection(connectionString)
Dim queryString As String = "SELECT distinct MEASURE FROM [CCC_MEASURE] where ein = '" & request("man_ein2") & "'"
Dim dbCommand As System.Data.IDbCommand = New System.Data.SqlClient.SqlCommand
dbCommand.CommandText = queryString
dbCommand.Connection = dbConnection
dbConnection.Open
Dim dataReader As System.Data.IDataReader = dbCommand.ExecuteReader(System.Data.CommandBehavior.CloseConnection)
Return dataReader
End Function
Is there any way(other than Profiler) to capture a full SQL Query statment. I've used dbcc inputbuffer and the current activity screen, both return 255 characters. I'd like to capture the whole query. Thanks
Pete Karhatsu
Hi y'all....long time, I know...
I have what OUGHT to be a simple question...or so I think (which really hurts, mind you...)
I am writing a stored proc that will reside on several different databases and be used to write a row to a "wait table" that is used to control processing in the various databases...
Essentially, the stored proc already exists, and writes what is essentially a note (or process semaphore) that says "Hey, Process XYZ is waiting on the completion of process 123"
Problem is...process XYZ has the same name on a number of different servers, so I have to come up with a way to differentiate the process name that's waiting on a job on a single server (in other words, 5 or more XYZ's can be waiting on a single job on a single server in the network, and the wait table resides on that single server).
So...my thought (again, think pain) is that I will put a process name of "SERVER.XYZ" into the wait table.
The SP I will use to write the "waiting on" semaphore is a common one, so - long story short(er) I need a way to capture the name of the current server (like db_name(), only server_name() - or something like it).
Any suggestions? Thanks in advance...
Paul