Hi,
My SQL Server database is case in-sensitive.
I have a lookup task to join on varhar column. If the data is only case different such as 'DataModel' and 'Datamodle', lookup task consdiers them as different. Is there a way to set up lookup task as case insentive? I know I can work around it by converted them to upper case and compare them.
How can I change my T-SQL text editor from text sensitive to text insensitive?
View 2 Replies View RelatedCan someone point me to a tutorial on how to search against a SQL Server 2000 using a case insensitive search when SQL Server 2000 is a case sensitive installation?
thanks in advance.
We need to install CI database on CS server, and there are some issueswith stored procedures.Database works and have CI collation (Polish_CI_AS). Server hascoresponding CS collation (Polish_CS_AS). Most queries and proceduresworks but some does not :-(We have table Customer which contains field CustomerID.Query "SELECT CUSTOMERID FROM CUSTOMER" works OK regardless ofcharacter case (we have table Customer not CUSTOMER)Following TSQL generate error message that must declare variable @id(in lowercase)DECLARE @ID INT (here @ID in uppercase)SELECT @id=CustomerID FROM Customer WHERE .... (here @id in lowercase)I know @ID is not equal to @id in CS, but database is CI and tablenames Customer and CUSTOMER both works. This does not work forvariables.I suppose it is tempdb collation problem (CS like a server collationis). I tried a property "Identifier Case Sensitivity" for myconnection, but it is read only and have value 8 (Mixed) by default -this is OK I think.DO I MISS SOMETHING ????
View 4 Replies View RelatedI am working in a SQL server database that is configured to be case-insensetive but I would like to override that for a specific query. How can I make my query case-sensitive with respect to comparison operations?
Jacob
I am curious with using replication in sql server 2005 one way from db A (source) replicating to db B(destination) in which db A has a collation of CS and db B has a collation of CI. Will there be any problems with this scenario? Thanks in advance!
View 2 Replies View RelatedYesterday I received a response to my CI/CS Collation problem and therecommendation was to try and restore a CI Collation database to a CSCollation database. After creating a blank CS database a full restore(Force restore over existing database) does change the Collation toCI. I'm unsure as to how I can restore without changing theCollation. Any suggestions?
View 2 Replies View RelatedDear everyone,
I am doing Login webform (C# .NET web application) with SQL Server 2000.
The staff table is to store authenticated user info.
But when I test it, I found that the password can be case insensitive, i.e. 'A0001' should be correct password, but 'a0001' can allow login.
Could anyone tell me how to solve this problem??
Thanks you very much!!
private void btnLogin_Click(object sender, System.EventArgs e)
{
//instantiate SQL connection
SqlConnection sqlConnect = new SqlConnection(connectStg);
SqlCommand selectLogin = sqlConnect.CreateCommand();
selectLogin.CommandText = "SELECT sid, type from STAFF Where sid= '" + txtId.Text + "' and pwd= '" + txtPwd.Text + "' ";
//open connectin for execution
sqlConnect.Open();
//instantiate the SqlDataReader reader
SqlDataReader loginReader = selectLogin.ExecuteReader();
//try and catch SqlException error
try
{
if(loginReader.Read())
{
// check whether the user is the role of administrator or operator
// I use GetValue(1) i.e. type field from the above select statement // if "O' then go operator page, else go to administrator page.
if (loginReader.GetValue(1).ToString().ToUpper().Equals("O"))
{
Server.Transfer("//SMS/LoginUser/SuccessLoginOper.aspx");
}
else if (loginReader.GetValue(1).ToString().ToUpper().Equals("A"))
{
Server.Transfer("//SMS/LoginUser/SuccessLoginAdmin.aspx");
}
}
else
{
//clear content of textbox and display error message
txtId.Text="";
txtPwd.Text="";
lblLoginFail.Visible = true;
lblLoginFail.Text="Login Failed!<br>" + "Ensure that ID and Password are correct!";
}
}
catch (SqlException se)
{
if (se.Number == 17)
{
lblLoginFail.Visible = true;
lblLoginFail.Text = "Could not connect to the database";
}
else
{
lblLoginFail.Visible = true;
lblLoginFail.Text = se.Message;
}
}
//close SqlDataReader and SqlConnection
loginReader.Close();
sqlConnect.Close();
Hi
how can i use the sensive case in a select field from table where fild='GhhY' ?
are SQL Server 7 table names, column names case sensitive?
View 2 Replies View RelatedIn SQL Server 7.0, how do you SELECT a column which has values beginning with only lower case letters
can anyone advise?
Hi,
I want to change my database character set and I use database SQL Server 6.5.
At the first time I install database, I use charset type to case sensitive.
Now, I want to change this charset from case sensitive to un case sensitive.
I hope somebody want to trasnfer knowledge about it.
Thanks for attention.
Regards,
Susan
Hi,
I am using SQL Server 2000.
How to make case sensitive of a database.
Eg :
Should work
Select * from Employees
Select * from Employees where Title like 'S%'
Should not work
select * from employees
select * from employees where title like 's%'
Thanks in advance.
I just created my first Asp.net app. I had to install it to a corporate server. What I found is that the corporate SQL Server 2000 was case sensitive in the stored procedures while my installation was not!
How can I set my SQL Server 2000 to be case sensitive as well?
Hi all,
There is a requirement to perform a case-sensitive search
on a column in table. The installation of SQL Server is
case-insensitive...
Eg.: select * from t1 where c1 = 'abcd'
should return only rows where c1 = 'abcd' and not 'ABCD'
or 'Abcd' or any other.
I understand that this can be done using the CONTAINS
predicate using Full-text indexing.
select * from t1 where CONTAINS(c1,'abcd')
Is this the right solution to the problem? Has someone
had experience implementing this?
Thanks in advance.
-Praveena
Our database is configured as case insensitive. I need to run a query which is case sensitive. Is there a query option or function I can use to compare, taking upper/lower case into consideration?
Regards,
Gavin Patterson
Is it possible in SQL Server 7.0 sp1 to have a
password that is case-sensitive on a case-insensitive
installation of SQL server?
Toni
How do you set the case sensitive option in SQL 2000? If l already have data in the database whats the best way of doing this.l want the selects on the database to be case sensitive?
View 3 Replies View RelatedAfter all the pain I've been going through with code pages and collation, I was asked how, when sql server does it's joins and predicate searches, how does it actual (internals now) know the an "A" = "a" in an insensitive search?
I didn't have the answer.
Damn, Now I really have to pick up Kelans book.
I'm a bit flummoxed on this one (doesn't take much these days). We have a test SQL database and a prod SQL database configured with the same user name and a complex password.
The password consists of letters and numbers, mixed upper and lower.
What I am seeing, however, is that SQL will permit access even if the user gets the case wrong on the letters. One letter, two letters, all letters. It doesn't matter.
I thought SQL passwords were case sensitive; was I wrong?
Regards,
hmscott
Edit: I should add that I am running SQL 2000, SP3a (hotfix 0818) on Windows 2000 SP4 and that SQL is clustered on two servers in Active/Passive mode (this applies to both Test and Prod).
in sql server 2000 or 2003 how can i tell if a database is case sensitive or not??
View 2 Replies View Relatedhi friends, is it possible to make sqlserver case sensitive?
i mean is there any options to set while installation?
thank you very much
Hi,I have yet to find an answer for this:I want to do a case-sensitive query using "like" on a table in sql 7.Currently, "like" performs case-insensitive query.I understand that you can use the following query in sql 2000:SELECT *FROM table_xWHERE col1 collate SQL_Latin1_General_CP1_CS_AS LIKE '% AVE %'However, is there a similar method for sql 7?Any answer would be appreciated.Thanks,Jay
View 1 Replies View RelatedUsing ADO 2.7, what is the best way to perform a case-sensitive filter? I have seen on other forums where folks have said that the StrComp function can be used inside of the .Filter method, but I haven't been able to get that to work. I am using VB 6 and ADO 2.7, and have a need to perform case sensitive filters. I know I am not the ony one who has needed to do this...
As always, your time is appreciated.
We did some hardware work on our server, after reinstalling the OS and SQL we reattached our DB.
Now it appears as if SQL is set up as case sensitive and our application is crashing.
How do I make SQL Case insensitive once it is installed?
In the process of migrating from SQL Server 2000 to SQL Server 2005, an application that auto-generates reports suddenly started failing. It turned out that the usernames and passwords were being up-cased, and SQL Server authentication on the 2005 box was rejecting the logons. When the app was changed to leave credentials in whatever case they were received, the reports all ran successfully.
Is that case-sensitivity a function of the collation schema on the database? On the entire SQL Server installation?
Either way, how can it be changed to be case-insensitive for such credentials?
Thnx!
Phil
Hello,
I have an application that at the begining a user will login with a user name and password which is stored in the database. The SQL statement is as follows:
"SELECT id_employee FROM employee WHERE employee_number='" + txtUserName.Text + "' AND passWord='" + txtPassword.Text + "'";
For testing purposes I have set the password to the word test. The problem is, if the user enters in TEST or TeSt or TESt it will grant them access. How do I set it to force the correct case?
I am using SQL 2005 for the database.
Thanks!
~zero
say, in my database there're two rows,
name age career
------------------------
dave 20 student
Dave 20 student
if i use select * from db where name='dave'
both will come out, how to do a case-sensitive that i got only the 1st row ?
Hi there,
I am using a PIVOT to count the number of chunk for each block type:
ex.:
block_type, chunk
a, <data>
a, <data>
b, <data> ...
My problem is that the block_type is case-sensitive, 'a' should not be counted as a 'A'.
How can I take the case in consideration?
I've tried to plug a COLLATE SQL_Latin1_General_CP1_CS_AS statement but it doesn't seem to be supported... Something like:
SELECT *
FROM recv.test_Blocks
PIVOT (
COUNT(chunk)
FOR block_type COLLATE SQL_Latin1_General_CP1_CS_AS
IN ([9.], a, B, h, q)
) AS pvt
Also something like:
IN (a, A)
returns an error: The column 'A' was specified multiple times for 'pvt'.
Thanks
Dear SQL Experts,
Can I change an existing 2000 sql server to case-sensative?
Books on-line tell you how to create one during setup, but requirements around here dictate that I chage my existing setup.
Any help would be greatly appreciated.
Thanks
I noticed an example of setting a localization ID when I created a new SQL Ev database. The doc says in ms171864 that SQL Mobile databases are never case-sensitive. Is this correct for SQL Ev?
I want to specify the data in columns are both upper & lower case(i.e. one column data having all lowercase data or uppercase data ).
Ex:- if i have one column - col1 and its
1st value is RAKESH JHA
2nd value is rakesh jha
then how i can find that, how much row are in upper case. respectively lower case
It appears that table grouping is case sensitive (for example, Re-Roof versus Re-roof appears to be causing a group break). I can't find a parameter to change this behaviour in Reporting Services.
Can anyone verify that it is in fact case sensitive? How to change?
I am running SQL Server 2000 and the database that I am querying is not case sensitive.