Case Statement - Count Orders That Fall Into Specific Dollar Buckets
Aug 2, 2013
I have a table of orders. I was asked to count the orders that fall into specific dollar buckets. Normally I would use a CASE statement for this, but in this case, there are over 100 different buckets!
For example, I need to count the orders in $5 increments up to $400. The CASE statement would look like this:
Code:
CASE
WHEN sum(revenue) BETWEEN 0.01 AND 5.00 THEN [0.01 to 5.00]
WHEN sum(revenue) BETWEEN 5.01 AND 10.00 THEN [5.01 to 10.00]
...
WHEN sum(revenue) BETWEEN 395.01 AND 400.00 THEN [395.01 to 400.00]
Is there an easier way to do this, maybe with a loop?
I have to count the number of Ideas and Markets here.
CASE WHEN Team IN ('Development/Deployment Project', 'Deployment Fixed Team', 'Development Fixed Team', 'Non Fixed Team') THEN 'Ideas' ELSE 'Markets' END
Here's my query - Since I'm grouping by the partnerid
select distinct make, count(leadid) as TotalCount, case when PartnerID = 1 then 'retail' else 'wholesale' end as disposition from leads_sent (nolock)where datein between '2007-09-01' and '2007-09-30' group by make, partnerid order by make
Here's a sample my current output -
Acura 1 wholesale Acura 2 wholesale Acura 4 wholesale Acura 5 wholesale Acura 21 wholesale Acura 34 wholesale Acura 37 wholesale Acura 56 wholesale Acura 57 wholesale Acura 72 wholesale Acura 510 retail Audi 1 wholesale Audi 3 wholesale Audi 7 wholesale Audi 12 wholesale Audi 16 wholesale Audi 18 wholesale Audi 23 wholesale
I have the following query, that returns the proper count value I am looking for. I would like to modify it a little bit, but can't remember exactly how to do it.
select count(messageFromID) FROM tblMessage WHERE messageFromID = 1000) as OutBoundMessages
Basically now, it returns the "OutBoundMessages" column
I would like it to return "OutboundMessages_unChecked" and "OutboundMessages_checked" as well as "OutboundMessages_total" (I guess I could determine this value by adding the two values in the front end too. I definatley dont want to do a lookup to determine the total )
I determine if the column is "checked" or "unChecked" by a column in tblMessage
I have an Address column that I need to Substring. I want to remove part of the string after either, or both of the following characters i.e ',' OR '*'
Example Record 1. Elland **REQUIRES BOOKING IN*** Example Record 2. Theale, Nr Reading, Berkshire Example Record 3. Stockport
How do I achieve this in a CASE Statement?
The following two case statements return the correct results, but I some how need to combine them into a single Statement?
,LEFT(Address ,CASE WHEN CHARINDEX(',',Address) =0 THEN LEN(Address ) ELSE CHARINDEX(',' ,Address ) -1 END) AS 'Town Test'
,LEFT(Address ,CASE WHEN CHARINDEX('*',Address ) =0 THEN LEN(Address) ELSE CHARINDEX('*' ,Address ) -1 END) AS 'Town Test2'
SELECT COUNT(DISTINCT CASE WHEN visit_type = 0 THEN visitor_id END) AS [New Visitors], COUNT(DISTINCT CASE WHEN visit_type = 0 THEN visitor_id END) AS [Returning Visitors] FROM content_hits_tbl WHERE (hit_date BETWEEN DATEADD(mm, - 1, GETDATE()) AND GETDATE())
=======================
How do I add up both COUNT/CASE columns? Would it be: SUM([New Visitors] + [Returning Visitors]) AS Total
I tried this and it doesn't work. I get invalid column names error for both.
I have even tried: SUM([COUNT(DISTINCT CASE WHEN visit_type = 0 THEN visitor_id END)] + [COUNT(DISTINCT CASE WHEN visit_type = 0 THEN visitor_id END)]) AS Total
You would think that there would be some gui functionality in VS08 that would do this...
I am selecting the count of the students in a class by suing select COUNT(studentid) as StCount FROM dbo.student But I need to use a case statement on this like if count is less than 10 I need to return 'Small class' if the count is between 10 to 50 then I need to return 'Medium class' and if the count is more than 50 then 'Big class'.
Right now I am achieving this by the following case statement
SELECT 'ClassSize' = CASE WHEN Stcount<10 THEN 'Small Class' WHEN Stcount>=10 and StCount<=50THEN 'Medium Class' WHEN Stcount>50 THEN 'Big Class' END FROM( select COUNT(studentid) as Stcount FROM dbo.student) Stdtbl
How do I count the number of positive dollar values in a query? I have various negative and positive dollar values and want to count how many positive I have then I will know how many are negative. I cannot put >0 or >0.00 in the where because it still returns everything cuz the programmer set the datatype to be money
I have two tables customers and orders. customerID is the foreign key for order table. If I pass customername I need to get information about each customer how many orders holding?
I have a requirement to calculate the % change in the number of orders received today with the number of orders that were received 3 days back. All data is in the same table. There is a received date column.
I have two count(*) queries - one for today and one for 3 days back running separately and getting the results. Is it possible I can get the % change in orders received from 3 days back and today in one query.Also if I want to get the number of orders received today between 12:00am today and current time. How would I modify the query.
With the function below, I receive this error:Error:Transaction count after EXECUTE indicates that a COMMIT or ROLLBACK TRANSACTION statement is missing. Previous count = 1, current count = 0.Function:Public Shared Function DeleteMesssages(ByVal UserID As String, ByVal MessageIDs As List(Of String)) As Boolean Dim bSuccess As Boolean Dim MyConnection As SqlConnection = GetConnection() Dim cmd As New SqlCommand("", MyConnection) Dim i As Integer Dim fBeginTransCalled As Boolean = False 'messagetype 1 =internal messages Try ' ' Start transaction ' MyConnection.Open() cmd.CommandText = "BEGIN TRANSACTION" cmd.ExecuteNonQuery() fBeginTransCalled = True Dim obj As Object For i = 0 To MessageIDs.Count - 1 bSuccess = False 'delete userid-message reference cmd.CommandText = "DELETE FROM tblUsersAndMessages WHERE MessageID=@MessageID AND UserID=@UserID" cmd.Parameters.Add(New SqlParameter("@UserID", UserID)) cmd.Parameters.Add(New SqlParameter("@MessageID", MessageIDs(i).ToString)) cmd.ExecuteNonQuery() 'then delete the message itself if no other user has a reference cmd.CommandText = "SELECT COUNT(*) FROM tblUsersAndMessages WHERE MessageID=@MessageID1" cmd.Parameters.Add(New SqlParameter("@MessageID1", MessageIDs(i).ToString)) obj = cmd.ExecuteScalar If ((Not (obj) Is Nothing) _ AndAlso ((TypeOf (obj) Is Integer) _ AndAlso (CType(obj, Integer) > 0))) Then 'more references exist so do not delete message Else 'this is the only reference to the message so delete it permanently cmd.CommandText = "DELETE FROM tblMessages WHERE MessageID=@MessageID2" cmd.Parameters.Add(New SqlParameter("@MessageID2", MessageIDs(i).ToString)) cmd.ExecuteNonQuery() End If Next i ' ' End transaction ' cmd.CommandText = "COMMIT TRANSACTION" cmd.ExecuteNonQuery() bSuccess = True fBeginTransCalled = False Catch ex As Exception 'LOG ERROR GlobalFunctions.ReportError("MessageDAL:DeleteMessages", ex.Message) Finally If fBeginTransCalled Then Try cmd = New SqlCommand("ROLLBACK TRANSACTION", MyConnection) cmd.ExecuteNonQuery() Catch e As System.Exception End Try End If MyConnection.Close() End Try Return bSuccess End Function
I have a view where I'm using a series of conditions within a CASE statement to determine a numeric shipment status for a given row. In addition, I need to bring back the corresponding status text for that shipment status code.
Previously, I had been duplicating the CASE logic for both columns, like so:
Code Block...beginning of SQL view... shipment_status = CASE [logic for condition 1] THEN 1 WHEN [logic for condition 2] THEN 2 WHEN [logic for condition 3] THEN 3 WHEN [logic for condition 4] THEN 4 ELSE 0 END, shipment_status_text = CASE [logic for condition 1] THEN 'Condition 1 text' WHEN [logic for condition 2] THEN 'Condition 2 text' WHEN [logic for condition 3] THEN 'Condition 3 text' WHEN [logic for condition 4] THEN 'Condition 4 text' ELSE 'Error' END, ...remainder of SQL view...
This works, but the logic for each of the case conditions is rather long. I'd like to move away from this for easier code management, plus I imagine that this isn't the best performance-wise.
This is what I'd like to do:
Code Block ...beginning of SQL view... shipment_status = CASE [logic for condition 1] THEN 1 WHEN [logic for condition 2] THEN 2 WHEN [logic for condition 3] THEN 3 WHEN [logic for condition 4] THEN 4 ELSE 0 END,
shipment_status_text =
CASE shipment_status
WHEN 1 THEN 'Condition 1 text'
WHEN 2 THEN 'Condition 2 text'
WHEN 3 THEN 'Condition 3 text'
WHEN 4 THEN 'Condition 4 text'
ELSE 'Error'
END, ...remainder of SQL view...
This runs as a query, however all of the rows now should "Error" as the value for shipment_status_text.
Is what I'm trying to do even currently possible in T-SQL? If not, do you have any other suggestions for how I can accomplish the same result?
I'm having problems constructing a query. I need to get a count of emails in my database, but only the emails that appear 2 or more times. Can anyone help?
I am trying to count the number of value "99" for each column in the whole table to see how many "99" are there per column for the whole table... and get the percentage per each column.. How can I do this?
I am attempting to combine to queries that I created and am not having success. I need to get a count on a field for a specific value and have to do this by gender and by an age range. So here is the query I came up with. I don't get any errors produced but I also don't get any results.
$query = "SELECT p1.sex, age_group, COUNT(CASE WHEN p4.q1 = 'Yes' THEN p4.q1 END) AS heart_attack FROM (select p1.sex,". " CASE WHEN datediff(year, dateadd(day, -datepart(dayofyear, GetDate()), p1.birthday) , dateadd(day, -datepart(dayofyear, GetDate()), GetDate())) BETWEEN 11 AND 20 THEN '11-20'". " WHEN datediff(year, dateadd(day, -datepart(dayofyear, GetDate()), p1.birthday) , dateadd(day, -datepart(dayofyear, GetDate()), GetDate()))
Im trying to write an expression in a table cell which counts the number off records in a dataset given it is a certain value..
first column cell =count(Fields!idproduct.Value) = 'broadband' row heading = New Sales second column cell =count(Fields!idproduct.Value) = 'adsl'
I can create a matrix report which will achieve this however I need to create a few other calculated columns which a matrix table doesnt allow hence im trying to do this via expressions in a normal table, can this be done with IIF statements?
I'd like to limit my query results to only items that match any part of a dynamic csv string table but am having some trouble (postgres SQL). Details: I need to calculate how many hours our staff spends seeing clients. Each staff has different appointments that can count toward this. The specified appointments for each staff are listed as comma separated values. My existing query calculates the appointment hours for each staff in a given time period.
However, I need limiting my query to only include specified activities for each staff. My current where clause uses IN to compare the appointment (i.e. activity) listed in the staff's schedule with what is listed an an approved appointment type (i.e. performance target activity). The query runs but it seems to only count one of the activities listed in the csv rather then count all the activities that match with the csv.
select (sum (kept)/60) from (select distinct rpt_scheduled_activities.staff_id as sid, rpt_scheduled_activities.service_date, rpt_scheduled_activities.client_id, from rpt_scheduled_activities inner join rpt_staff_performance_target on rpt_scheduled_activities.staff_id = rpt_staff_performance_target.staff_id where
This is primarily a question for DAX/Power BI. I'm trying to figure out how to count rows for a particular column where only a specific value exist. For instance, I'm trying to count how many times a certain field contains a true value or false value across multiple columns.
I have a table called Employees which has lots of columns but I only want to count some specific columns of this table.
i.e. EmployeeID: 001
week1: 40 week2: 24 week3: 24 week4: 39
This employee (001) has two weeks below 32. How do I use the COUNT statement to calculate that within these four weeks(columns), how many weeks(columns) have the value below 32?
i was tasked to created an UPDATE statement for 6 tables , i would like to update 4 columns within the 6 tables , they all contains the same column names. the table gets its information from the source table, however the data that is transferd to the 6 tables are sometimes incorrect , i need to write a UPDATE statement that will automatically correct the data. the Update statement should also contact a where clause
the columns are [No] , [Salesperson Code], [Country Code] and [Country Name]
i was thinking of doing
Update [tablename] SET [No] = CASE WHEN [No] ='AF01' THEN 'Country Code' = 'ZA7' AND 'Country Name' = 'South Africa' ELSE 'Null' END
Hello friends, I want to use select statement in a CASE inside procedure. can I do it? of yes then how can i do it ?
following part of the procedure clears my requirement.
SELECT E.EmployeeID, CASE E.EmployeeType WHEN 1 THEN select * from Tbl1 WHEN 2 THEN select * from Tbl2 WHEN 3 THEN select * from Tbl3 END FROM EMPLOYEE E
can any one help me in this? please give me a sample query.
Hi, I've been through Books Online, Technet, MSN and the archives on this site trying to get a difinite answer on this. Everything except Technet indicates a maximum configurable value of 265003. However in Technet, it says that if you are running the enterprise edition with more than 2GB of memory that you can configure this to a much higher number (their example is 700000). Using the calculation involving memory, and based on several dozen performance tests, we would like to set our value to around 666000 (using the prime number of course). However we cannot get SQL to accept any value over the default maximum.
Is Technet wrong? Are we missing something? I cant find any reference other than in Technet on being able to use the higher number.
Hi All, I've looked through the forum hoping I'm not the only one with this issue but alas, I have found nothing so I'm hoping someone out there will give me some assistance. My problem is the case statement in my Insert Statement. My overall goal is to insert records from one table to another. But I need to be able to assign a specific value to the incoming data and thought the case statement would be the best way of doing it. I must be doing something wrong but I can't seem to see it.
Here is my code: Insert into myTblA (TblA_ID, mycasefield = case when mycasefield = 1 then 99861 when mycasefield = 2 then 99862 when mycasefield = 3 then 99863 when mycasefield = 4 then 99864 when mycasefield = 5 then 99865 when mycasefield = 6 then 99866 when mycasefield = 7 then 99867 when mycasefield = 8 then 99868 when mycasefield = 9 then 99855 when mycasefield = 10 then 99839 end, alt_min, alt_max, longitude, latitude ( Select MTB.LocationID MTB.model_ID MTB.elevation, --alt min null, --alt max MTB.longitude, --longitude MTB.latitude --latitude from MyTblB MTB );
The error I'm getting is: Incorrect syntax near '='.
I have tried various versions of the case statement based on examples I have found but nothing works. I would greatly appreciate any assistance with this one. I've been smacking my head against the wall for awhile trying to find a solution.
material ========= material_id project_type project_id qty 1 AB Corporate 1 3 2 Other Project 2 7
i have taken AB Corporate for AB_Corporate_project ,Other Project for Other_project
sample query i write :--
select m.material_id ,m.project_type,m.project_id,m.qty,ab.ab_crp_id, ab.custname ,op.other_proj_id,op.other_custname,op. po case if m.project_type = 'AB Corporate' then select * from AB_Corporate_project where ab.ab_crp_id = m.project_id else if m.project_type = 'Other Project' then select * from Other_project where op.other_proj_id=m.project_id end from material m,AB_Corporate_project ab,Other_project op
but this query not work,also it gives errors
i want sql query to show data as follows
material_id project_type project_id custname other_custname qty 1 AB Corporate 1 abc -- 3 2 Other Project 2 -- dsd 7
so plz help me how can i write sql query for to show the output plz send a sql query
Hi Everyone, I am trying to do a query where I need to use as little C# as possible to build my gridview. Basically I have a column called statusID. There are about 15 options for this column but I only want to count certain ones. I want to count when statusID = 3 and output that into a column called "fullUnitsUsed" but when the value is 4 or > 13 I want it to count and put the result into a column called "halfUnitsUsed". I also want it to count based on the month. To accomplish this I have used CASE and GROUP BY. This has worked to some extent. Currently if I COUNT for one month I get the correct number of fullUnitsUsed and halfUnitsUsed used for January. Unfortunately the query returns 2 records for the month. The first one has a value for fullUnitsUsed and halfUnitsUsed is NULL, the second record has fullUnitsUsed as NULL and halfUnitsUsed has the correct value. I was hoping to output one record where both fullUnitsUsed and halfUnitsUsed have data. My other problem is that if I test for the entire year (which is what this query is supposed to do) there are 5 records returned for each month, 3 of the records have fullUnitsUsed and halfUnitsUsed both as NULL and for the other 2, one has fullUnitsUsed with data and the other has halfUnitsUsed with data and the other column in both records is NULL. The values for fullUnitsUsed and halfUnitsUsed are counted for the entire year as well, which I only want it to count based on each month. Below is my query, any suggestions about how to approach this will be greatly appreciated. If any clarification is needed please let me know. Again if I could get this to work completely with SQL and not need to use any more C# than I have to it would be preferable. SELECT People.lastName + ', ' + People.firstName AS fullName, Property.Name, NYSDDSORegion.Description, OpenDays.[month], OpenDays.maxOpenDays,CASE Attend.statusID WHEN 3 THEN COUNT(Attend.statusID) END AS fullUnitsUsed,CASE Attend.statusID WHEN 4 THEN COUNT(Attend.statusID) WHEN 14 THEN COUNT(Attend.statusID) WHEN 15 THEN COUNT(Attend.statusID) WHEN 16 THEN COUNT(Attend.statusID) WHEN 17 THEN COUNT(Attend.statusID) WHEN 18 THEN COUNT(Attend.statusID) WHEN 19 THEN COUNT(Attend.statusID) WHEN 20 THEN COUNT(Attend.statusID) END AS halfUnitsUsed FROM Attend INNER JOIN People ON Attend.personID = People.personID INNER JOIN Property ON Attend.propertyID = Property.propertyID INNER JOIN NYSDDSORegion ON Property.RegionID = NYSDDSORegion.RegionID CROSS JOIN OpenDays WHERE (Attend.attendDate BETWEEN '1/1/2007' AND '12/31/2007') GROUP BY Property.Name, People.lastName, NYSDDSORegion.Description, People.firstName, OpenDays.monthID, OpenDays.[month], OpenDays.maxOpenDays, Attend.statusID ORDER BY Property.Name, fullName, NYSDDSORegion.Description
It doesn't seem possibly, but maybe? Is there a way to have an expression be used, but also benefit from using distinct on a column?
I'm looking for something like: sum(case when dtEntered > '1-1-2006' then 1 else 0 end) but also encorporating somehow a distinct count on UserName. So a username showing twice would only count once, and this would only be counted if the record's dtEntered date was greater than Jan 1, 2006.
The reason I'm writing the statement that way is because there are 5 columns which aggregate data by different time periods.
If it's not possible, I will just end up joining to the table multiple times, putting the date filter in the where clause.
If I just use a simple select statement, I find that I have 8286 records within a specified date range.
If I use the select statement to pull records that were created from 5pm and later and then add it to another select statement with records created before 5pm, I get a different count: 7521 + 756 = 8277
Is there something I am doing incorrectly in the following sql?
DECLARE @startdate date = '03-06-2015' DECLARE @enddate date = '10-31-2015' DECLARE @afterTime time = '17:00' SELECT General_Count = (SELECT COUNT(*) as General FROM Unidata.CrumsTicket ct
