I have a table with a list of payment information i have three other tables that store different types of commission rates that were active at a particular time.
Payments table – holds all payments received by customers
DirectRate table – holds the Direct rate active between start and end dates
ComRate table – holds the Commission rate active between start and end dates
FieldRate table – holds the Field rate active between start and end dates
Basically I am trying to get the total value of commission on all payments for all the different rates. To give you an example one payment can be of type Direct which would have to have the correct payment rate applied from the DirectRate table for the correct date range, this also applies for payments that are of type ComRate & FieldRate.
So I have the following SQL
SELECT CASE
WHEN dp.ReceivedByID = 1
THEN
dp.Amount * ((Select tF.Rate From dbo.mTrackerFeeChange tF where tF.ClientID=d.ClientID and tF.ContractID=d.ContractID AND ((dp.PaymentOn >= tF.StartDate AND dp.PaymentOn <= tF.EndDate) or (dp.PaymentOn >= tF.StartDate AND tF.EndDate IS NULL)))/100)
WHEN dp.ReceivedByID = 2
THEN
dp.Amount * ((Select tD.Rate From dbo.mTrackerDirectChange tD where tD.ClientID=d.ClientID and tD.ContractID=d.ContractID AND ((dp.PaymentOn >= tD.StartDate AND dp.PaymentOn <= tD.EndDate) or (dp.PaymentOn >= tD.StartDate AND tD.EndDate IS NULL)))/100)
ELSE
dp.Amount * (((Select tF.Rate From dbo.mTrackerFeeChange tF where tF.ClientID=d.ClientID and tF.ContractID=d.ContractID AND ((dp.PaymentOn >= tF.StartDate AND dp.PaymentOn <= tF.EndDate) or (dp.PaymentOn >= tF.StartDate AND tF.EndDate IS NULL))) + (Select tFe.Rate From dbo.mTrackerFieldChange tFe where tFe.ClientID=d.ClientID and tFe.ContractID=d.ContractID AND((dp.PaymentOn >= tFe.StartDate AND dp.PaymentOn <= tFe.EndDate) or (dp.PaymentOn >= tFe.StartDate AND tFe.EndDate IS NULL))))/100)
END
From
dbo.DebtPayment dp,
dbo.ImportBatchItem bi,
dbo.Debt d
where
d.DebtID=dp.DebtID
AND dp.DebtID=bi.ItemID
AND bi.ImportBatchID=2
I am using dp.ReceivedByID to assertain the payment type then depending upon that using the case statement to multiply the amount by the correct rate for the correct date range in the correct table. This sql works fine but it gives me a list of commision values, one for each payment. My problem is when I try to do a sum on this case statement I get an error
“Cannot perform an aggregate function on an expression containing an aggregate or a subquery�
I'm trying to create an aliased field on the fly in my sql string to use later in my datagrid, but having a tuff time coordinating the right CASE WHEN together with a subquery: amtA = (select b.salesamount from b WHERE b.BoardDate = '" + day1 + "') CASE WHEN b.salesamount > 0 THEN 'amtA' ELSE NULL END , the above will not give me an error, but it displays a blank datagrid when posting a date from a calendar to view a datagrid with information for that particular date.What I want to accomplish is making amtA an aliased field - the salesamount from the day before. the user will click on a calendar date from the page before and view data for that date, but 'amtA' will be the salesamount from the previous day (already configured in c#: DateTime day1;day1 = requestedday.AddDays( -1);)and i will want to display 'amtA' in a column in my datagrid (eventually will do a sum with day2, day3, etc for a weekly total).Just wondering the best way to parse yesterday's 'amtA' and use it as an aliased field namethanks in advancenetsports
select (CASE WHEN tableA.col = 'a' then 'A' ELSE (select table3.col1 from tableA, table 2, table3 where tableA.id = table2.id and table2.id = table3.id )END ) as TEST from tableA
But the problem is that the part in bold returns more than one row.. i want it to be select table3.col1 from tableA, table 2, table3 where tableA.id = table2.id and table2.id = table3.id for every value of tableA.col.
Hi all, first, let me preface this by saying that I am very new to sqlserver, coming from oracle.Here is my problem: I would like to have a case statement (similar todecode in oracle) that will test a query for a null value. Here is mystatement:SELECTCASE(SELECT MAX(SEQ) + 1FROM [TRANSACTION]) WHEN NULLTHEN 0ELSE(SELECT MAX(SEQ) + 1FROM [TRANSACTION]) ENDIt functions correctly if there is a value for MAX(SEQ) + 1, otherwiseit returns null. It's as if the test for null fails. I hope thatmakes sense.This will ultimately be in an insert statement; I have taken it to thebare minimum to better understand where the problem is.Please let me know if I am doing something dumb. Does this sort ofthing have to in a stored procedure?Anyway, thanks for any help. have a great day!Ryan
I have the following in my WHERE clause for my Sql Server Reporting Services 2000 report (the user can use the parameter @MaxRevs to view all numbers (colNumber) or only the max of colNumbers when grouped by colParentNumber):
AND (tblMain.colNumber IN CASE @MaxRevs WHEN '' THEN '(SELECT colNumber FROM tblMain)' ELSE '(Select max(colNumber) From tblMain Group By [colParentNumber])' END))
I get the following error: 1. ADO error: Syntax error or ADO access error
I've used Case in the past, but it was for a "Like" portion in my WHERE clause.
The following doesn't seem to help me either in the SQL portion:
IF @MaxRevs = '' SELECT .... ELSE SELECT ....
With the above query, nothing is ever returned. I can even name the parameter to @MaxRevs55, which doesn't even exist, and the report just brings back a blank page w/o any errors.
I'm trying to select from a table with three columns. I want these columns to be spread out among multiple columns based on the values. I hope someone can shed some light on this. I might be able to use pivot, but don't know how the syntax would roll for this.
Here is the example of dummy values and the output I am trying to obtain.
drop table table1
create table table1
(Category int, Place int, Value int)
insert into table1 values
(1, 1, 20)
insert into table1 values
(1,2, 12)
insert into table1 values
(1,3, 30)
insert into table1 values
(2,1, 34)
insert into table1 values
(2,2, 15)
insert into table1 values
(2,3, 78)
select Category,
(select top 1 value from table1 where place = 1 and Category = t1.Category) as place1,
(select top 1 value from table1 where place = 2 and Category = t1.Category) as place2,
(select top 1 value from table1 where place = 3 and Category = t1.Category) as place3
hello friends.. I am newbie for sql server...I having a problem when executing this procedure .... ALTER PROCEDURE [dbo].[spgetvalues] @Uid intASBEGIN SET NOCOUNT ON; select DATEPART(year, c.fy)as fy, (select contribeamount from wh_contribute where and contribename like 'Retire-Plan B-1% JRF' ) as survivorship, (select contribeamount from wh_contribute where and contribename like 'Gross Earnings' and ) as ytdgross, (select contribeamount from wh_contribute where and contribename like 'Retire-Plan B-1.5% JRP') as totalcontrib, from wh_contribute c where c.uid=@Uid Order by fy Asc .....what is the wrong here?? " Subquery returned more than 1 value. This is not permitted when the subquery follows =, !=, <, <= , >, >= or when the subquery is used as an expression."please reply asap...
I am getting 2 resultsets depending on conditon, In the secondconditon i am getting the above error could anyone help me..........CREATE proc sp_count_AllNewsPapers@CustomerId intasdeclare @NewsId intset @NewsId = (select NewsDelId from NewsDelivery whereCustomerId=@CustomerId )if not exists(select CustomerId from NewsDelivery whereNewsPapersId=@NewsId)beginselect count( NewsPapersId) from NewsPapersendif exists(select CustomerId from NewsDelivery whereNewsPapersId=@NewsId)beginselect count(NewsDelId) from NewsDelivery whereCustomerid=@CustomeridendGO
I am new to reporter server and I am much more familar with Crystal. I am trying to write a formula/expression that is easy in crystal but can't seem to write it in Report Server.
It is a basic If Then statement that returns a value if 2 conditions are true and another value if they are false.
So
If State = 'TX'
and
City = 'Dallas'
then 1
else
0
I have been able to use the IIF expression but I can only get it to work with one variable. So, I can do
I'm in a Database class and am finding it very difficult to find any outside help. I'm sure this will appear to be very basic to those of you who work in the Database field, but your help will be greatly appreciated.
1.Write an SQL statement to show the Warehouse and average QunatityOnHand of all items stored in a warehouse managed by 'Smith'. Use a subquery.
2.Write an SQL statement to show the Warehouse and average QunatityOnHand of all items stored in a warehouse managed by 'Smith'. Use a join. This is what I came up with. Please give me some feedback:
SELECT Avg(QuantityOnHand) FROM INVENTORY WHERE WAREHOUSE IN (SELECT WAREHOUSE FROM MANAGER WHERE Manager = ‘Smith’);
What I have is a small DTS package that truncates a table then loads it from a text file. I want to enhance it by sending an e-mail with record counts to our client.
The load is pretty straight forward
delete from marketing..solicit_consumer from marketing..solicit_consumer sc join dsi_use..dnc_tmp dt on sc.consumer_no = dt.consumer_no and sc.solicit_cd = dt.solicit_cd go insert marketing..solicit_consumer select * from dsi_use..dnc_tmp go
After I have an Active X script to format an e-mail but I need the counts from the SQL statement. I have tried to use the following with no luck.
Option Explicit
Function Main() Dim oPkg, oDataPump, sSQLStatement
' Build new SQL Statement sSQLStatement = "SELECT count (*) FROM dsi_use..dnc_tmp " & _ DTSGlobalVariables("DNC_Count").Value & "'"
' Get reference to the DataPump Task Set oPkg = DTSGlobalVariables.Parent Set oDataPump = oPkg.Tasks("DTSTask_DTSDataPumpTask_1").CustomTask
' Assign SQL Statement to Source of DataPump oDataPump.SourceSQLStatement = sSQLStatement
if oDataPump.SourceSQLStatement <> 0 then FrmtEmail () Main = DTSTaskExecResult_Success else Main = DTSTaskExecResult_Failure end if
' Clean Up Set oDataPump = Nothing Set oPkg = Nothing
End Function
The actualy format of the e-mail I think will work if ony I can get the main function to work.
Right now it gives me a VB script runtime error.
Type Mismatch:'[string: "SELECT count(*) FR"]' error on line 19
Line 19 is somewhere within these lines
' Assign SQL Statement to Source of DataPump oDataPump.SourceSQLStatement = sSQLStatement
if oDataPump.SourceSQLStatement <> 0 then FrmtEmail ()
i'm passing 4 paramaters to a stored proc. based on the values of the paramaters i add conditions to my select. can som one please reviwe the proc below and tell me if my syntax is wrong or if there is another way of doing this.
Lets say that Dealers have ZipCodes, and that a Dealer can have more than one zipCode, and we want the list of dealers that have both 90210 and 90211 zip codes. BUT we don't want any dealers that have only one of the two ZipCodes in question
What I want to do is something like this
Select DealerID from DealerZips where Zip = '90210' intersection Select DealerID from DealerZips where Zip = '90211'
but I get this error msg: Line 2: Incorrect syntax near 'intersection'
The following sql is silly, but it does run without error Select DealerID from DealerZips intersection Select DealerID from DealerZips
So I am pretty sure my problem is with the Where clauses.
Subquery returned more than 1 value. This is not permitted when the subquery follows =, !=, <, <= , >, >= or when the subquery is used as an expression.
while running the following query.
SELECT DISTINCT EmployeeDetails.FirstName+' '+EmployeeDetails.LastName AS EmpName,
LUP_FIX_DeptDetails.DeptName AS CurrentDepartment,
LUP_FIX_DesigDetails.DesigName AS CurrentDesignation,
LUP_FIX_ProjectDetails.ProjectName AS CurrentProject,
ManagerName=(SELECT E.FirstName+' '+E.LastName
FROM EmployeeDetails E
INNER JOIN LUP_EmpProject
ON E.Empid=LUP_EmpProject.Empid
INNER JOIN LUP_FIX_ProjectDetails
ON LUP_EmpProject.Projectid = LUP_FIX_ProjectDetails.Projectid
WHERE LUP_FIX_ProjectDetails.Managerid = E.Empid)
FROM EmployeeDetails
INNER JOIN LUP_EmpDepartment
ON EmployeeDetails.Empid=LUP_EmpDepartment.Empid
INNER JOIN LUP_FIX_DeptDetails
ON LUP_EmpDepartment.Deptid=LUP_FIX_DeptDetails.Deptid
AND LUP_EmpDepartment.Date=(SELECT TOP 1 LUP_EmpDepartment.Date
FROM LUP_EmpDepartment
WHERE EmployeeDetails.Empid=LUP_EmpDepartment.Empid
ORDER BY LUP_EmpDepartment.Date DESC)
INNER JOIN LUP_EmpDesignation
ON EmployeeDetails.Empid=LUP_EmpDesignation.Empid
INNER JOIN LUP_FIX_DesigDetails
ON LUP_EmpDesignation.Desigid=LUP_FIX_DesigDetails.Desigid
AND LUP_EmpDesignation.Date=(SELECT TOP 1 LUP_EmpDesignation.Date
FROM LUP_EmpDesignation
WHERE EmployeeDetails.Empid=LUP_EmpDesignation.Empid
ORDER BY LUP_EmpDesignation.Date DESC)
INNER JOIN LUP_EmpProject
ON EmployeeDetails.Empid=LUP_EmpProject.Empid
AND LUP_EmpProject.StartDate=(SELECT TOP 1 LUP_EmpProject.StartDate
FROM LUP_EmpProject
WHERE EmployeeDetails.Empid=LUP_EmpProject.Empid
ORDER BY LUP_EmpProject.StartDate DESC)
INNER JOIN LUP_FIX_ProjectDetails
ON LUP_EmpProject.Projectid=LUP_FIX_ProjectDetails.Projectid
I've running the below query for months ans suddenly today started getting the following error :"Subquery returned more than 1 value. This is not permitted when the subquery follows =, !=, <, <= , >, >= or when the subquery is used as an expression."
Any ideas as to why??
SELECT t0.DocNum, t0.Status, t0.ItemCode, t0.Warehouse, t0.OriginNum, t0.U_SOLineNo, ORDR.NumAtCard, ORDR.CardCode, OITM_1.U_Cultivar, RDR1.U_Variety, (SELECT OITM.U_Variety FROM OWOR INNER JOIN WOR1 ON OWOR.DocEntry = WOR1.DocEntry INNER JOIN OITM INNER JOIN OITB ON OITM.ItmsGrpCod = OITB.ItmsGrpCod ON WOR1.ItemCode = OITM.ItemCode WHERE (OITB.ItmsGrpNam = 'Basic Fruit') AND (OWOR.DocNum = t0.DocNum)) AS Expr1, OITM_1.U_Organisation, OITM_1.U_Commodity, OITM_1.U_Pack, OITM_1.U_Grade, RDR1.U_SizeCount, OITM_1.U_InvCode, OITM_1.U_Brand, OITM_1.U_PalleBase, OITM_1.U_Crt_Pallet, OITM_1.U_LabelType, RDR1.U_DEPOT, OITM_1.U_PLU, RDR1.U_Trgt_Mrkt, RDR1.U_Wrap_Type, ORDR.U_SCCode FROM OWOR AS t0 INNER JOIN ORDR ON t0.OriginNum = ORDR.DocNum INNER JOIN RDR1 ON ORDR.DocEntry = RDR1.DocEntry AND t0.U_SOLineNo - 1 = RDR1.LineNum INNER JOIN OITM AS OITM_1 ON t0.ItemCode = OITM_1.ItemCode WHERE (t0.Status <> 'L')
Microsoft SQL Server 2000 - 8.00.2191 (Intel IA-64)
Mar 27 2006 11:51:52
Copyright (c) 1988-2003 Microsoft Corporation
Enterprise Edition (64-bit) on Windows NT 5.2 (Build 3790: Service Pack 1)
sp_dboption 'BB_XXXXX'
The following options are set:
-----------------------------------
trunc. log on chkpt.
auto create statistics
auto update statistics
OK, the problem is that if a run the below query in server01, i get error 512:
Msg 512, Level 16, State 1, Line 1
Subquery returned more than 1 value. This is not permitted when the subquery follows =, !=, <, <= , >, >= or when the subquery is used as an expression.
But, if run the same query in the server02, the query work fine -.
I know that I can use IN, EXISTS, TOP, etc ... but I need understand this behavior.
I am trying to add the results of both of these queries together:
The purpose of the first query is to find the number of nulls in the TimeZone column.
Query 1:
SELECT COUNT(*) - COUNT (TimeZone) FROM tablename
The purpose of the second query is to find results in the AAST, AST, etc timezones.
Query 2:
SELECT COUNT (TimeZone) FROM tablename WHERE TimeZone NOT IN ('EST', 'MST', 'PST', 'CST')
Note: both queries produce a whole number with no decimals. Ran individually both queries produce accurate results. However, what I would like is one query which produced a single INT by adding both results together. For example, if Query 1 results to 5 and query 2 results to 10, I would like to see a single result of 15 as the output.
What I came up with (from research) is:
SELECT ((SELECT COUNT(*) - COUNT (TimeZone) FROM tablename) + (SELECT COUNT (TimeZone) FROM tablename WHERE TimeZone NOT IN ('EST', 'MST', 'PST', 'CST'))
I get a msq 102, level 15, state 1 error.
I also tried
SELECT ((SELECT COUNT(*) - COUNT (TimeZone) FROM tablename) + (SELECT COUNT (TimeZone) FROM tablename WHERE TimeZone NOT IN ('EST', 'MST', 'PST', 'CST')) as IVR_HI_n_AK_results
but I still get an error. For the exact details see:
[URL]
NOTE: the table in query 1 and query 2 are the same table. I am using T-SQL in SQL Server Management Studio 2008.
I have created an SQL server table in the past on a server that was all case sensative. Over time I found out that switching to a server that is not case sensative still caused my data to become case sensative. I read an article that said you should rebuild your master database then re-create your tables. So after rebuilding the master database, a basic restore would not be sufficient? I would have to go and manually re-create every single table again?
Can someone point me to a tutorial on how to search against a SQL Server 2000 using a case insensitive search when SQL Server 2000 is a case sensitive installation?
We need to install CI database on CS server, and there are some issueswith stored procedures.Database works and have CI collation (Polish_CI_AS). Server hascoresponding CS collation (Polish_CS_AS). Most queries and proceduresworks but some does not :-(We have table Customer which contains field CustomerID.Query "SELECT CUSTOMERID FROM CUSTOMER" works OK regardless ofcharacter case (we have table Customer not CUSTOMER)Following TSQL generate error message that must declare variable @id(in lowercase)DECLARE @ID INT (here @ID in uppercase)SELECT @id=CustomerID FROM Customer WHERE .... (here @id in lowercase)I know @ID is not equal to @id in CS, but database is CI and tablenames Customer and CUSTOMER both works. This does not work forvariables.I suppose it is tempdb collation problem (CS like a server collationis). I tried a property "Identifier Case Sensitivity" for myconnection, but it is read only and have value 8 (Mixed) by default -this is OK I think.DO I MISS SOMETHING ????
I am working in a SQL server database that is configured to be case-insensetive but I would like to override that for a specific query. How can I make my query case-sensitive with respect to comparison operations?
I am curious with using replication in sql server 2005 one way from db A (source) replicating to db B(destination) in which db A has a collation of CS and db B has a collation of CI. Will there be any problems with this scenario? Thanks in advance!
I have a view where I'm using a series of conditions within a CASE statement to determine a numeric shipment status for a given row. In addition, I need to bring back the corresponding status text for that shipment status code.
Previously, I had been duplicating the CASE logic for both columns, like so:
Code Block...beginning of SQL view... shipment_status = CASE [logic for condition 1] THEN 1 WHEN [logic for condition 2] THEN 2 WHEN [logic for condition 3] THEN 3 WHEN [logic for condition 4] THEN 4 ELSE 0 END, shipment_status_text = CASE [logic for condition 1] THEN 'Condition 1 text' WHEN [logic for condition 2] THEN 'Condition 2 text' WHEN [logic for condition 3] THEN 'Condition 3 text' WHEN [logic for condition 4] THEN 'Condition 4 text' ELSE 'Error' END, ...remainder of SQL view...
This works, but the logic for each of the case conditions is rather long. I'd like to move away from this for easier code management, plus I imagine that this isn't the best performance-wise.
This is what I'd like to do:
Code Block ...beginning of SQL view... shipment_status = CASE [logic for condition 1] THEN 1 WHEN [logic for condition 2] THEN 2 WHEN [logic for condition 3] THEN 3 WHEN [logic for condition 4] THEN 4 ELSE 0 END,
shipment_status_text =
CASE shipment_status
WHEN 1 THEN 'Condition 1 text'
WHEN 2 THEN 'Condition 2 text'
WHEN 3 THEN 'Condition 3 text'
WHEN 4 THEN 'Condition 4 text'
ELSE 'Error'
END, ...remainder of SQL view...
This runs as a query, however all of the rows now should "Error" as the value for shipment_status_text.
Is what I'm trying to do even currently possible in T-SQL? If not, do you have any other suggestions for how I can accomplish the same result?
I am working on a C#/asp.net web application. The application has a text box that allows a user to enter a name. The name is then saved to the database. Before the name is saved to the database, I need to be able to check if the name already exists in the database. The problem here is that what if the name is in the database as "JoE ScMedLap" and somoene enters the name as "Joe Schmedlap" which already exists in the database,but just differs in case. In other words how do deal with case sensitiviy issues.
Yesterday I received a response to my CI/CS Collation problem and therecommendation was to try and restore a CI Collation database to a CSCollation database. After creating a blank CS database a full restore(Force restore over existing database) does change the Collation toCI. I'm unsure as to how I can restore without changing theCollation. Any suggestions?
Hi and thanks in advance for the help. Here's what I'm trying to do, I need to select all the rows from one table, and only 1 row from a related table. Table setup Table1: Field 1 = PK Ident Table2: Field1 = FK ident I need to select all the rows that exist in Table 1, and I need 1 row out of table2 where Field1 is equal to the Table1.Field1 value (multiple records in table2 will exist with that same value.) I need the top row using a SELECT TOP 1 I was trying to do this with a subquery, but SQL is throwing an error asking me for EXISTS statments.
I have the following as a subquery in a larger stored procedure: SELECT P.ProductId, P.ProductName, P.Category , (SELECT MAX(O.Orderdate) FROM dbo.[Orders] AS O WHERE O.ProductId=P.ProductId) As MostRecentOrder, ROW_NUMBER() OVER (ORDER BY MostRecentOrder DESC) AS RowNumber FROM dbo.[Products] AS P WHERE P.Category=@category @category is an input parameter I am getting an error pointing to the Order By clause stating that "MostRecentOrder" is an invalid column name. If I sort by P.ProductId or P.ProductName, it works fine. Any ideas?
Hi All, This Subquery is kicking my ***. Maybe you can help. I want to query a query.I have the user enter a phrase from a textbox, then I want to group the results by element_label. This is what i have so far, but its not working. SELECT Element_ID, Element_Label, Element_Name, Question_ID, Question_Label, Question_Level, Question_Text, RelatedSRR FROM qryforaspx WHERE ([Question_Text] LIKE '%' + ? + '%') IN SELECT Element_Label FROM Description Group by Element_label Thanks,
