The following is my table whereby i have joined projects table with issue table (this is 1 to many relationship).
I have the following query:
SELECT
odf.mbb_sector sectorid,
SUM(case when odf.mbb_projecttype = 'lkp_val_appl' then 1 else 0 end) total_appl,
SUM(case when odf.mbb_projecttype = 'lkp_val_infrastructure' then 1 else 0 end) total_infra,
SUM(case when odf.mbb_projecttype = 'lkp_val_eval' then 1 else 0 end) total_eval,
SUM(case when odf.mbb_projecttype = 'lkp_val_subproject' then 1 else 0 end) total_subprj,
SUM(case when odf.mbb_projecttype = 'lkp_val_nonit' then 1 else 0 end) total_nonit,
SUM(case when odf.mbb_projecttype = 'lkp_val_adhocrptdataextract' or
odf.mbb_projecttype = 'lkp_val_productionproblem' or
odf.mbb_projecttype = 'lkp_val_maintwoprogchange' then 1 else 0 end) total_others,
COUNT(distinct prj.prid) total_prj
FROM
PRJ_PROJECTS AS PRJ,
SRM_PROJECTS AS SRM,
ODF_CA_PROJECT AS ODF
LEFT JOIN RIM_RISKS_AND_ISSUES AS RRI ON RRI.pk_id = odf.id
WHERE
prj.prid = srm.id
AND srm.id = odf.id
AND srm.is_active =1
AND odf.mbb_projecttype not in ('lkp_val_budget','lkp_val_itpc')
AND odf.mbb_funcunit = 'lkp_val_operation'
GROUP BY
odf.mbb_sector
which returns me the following result :
.
The problem is at the lkp_val_infosystem where it returns 3 instead of 1 in the total_infra column. How do I correct my case stmt to return the correct no of projects breakdown by different project type? Currently, only the total_prj which returns correct data.
I am trying to code a WHERE xxxx IN ('aaa','bbb','ccc') requirement but it the return values for the IN keyword changes according to another column, thus the need for a CASE function.
WHERE GROUP.GROUP_ID = 2 AND DEPT.DEPT_ID = 'D' AND WORK_TYPE_ID IN ( CASE DEPT_ID WHEN 'D' THEN 'A','B','C' <---- ERROR WHEN 'F' THEN 'C','D ELSE 'A','B','C','D' END )
I kept on getting errors, like
Msg 156, Level 15, State 1, Line 44Incorrect syntax near the keyword 'WHERE'. which leads me to assume that the CASE ... WHEN ... THEN statement does not allow mutiple values for result expression. Is there a way to get the SQL above to work or code the same logic in a different manner in just one simple SQL, and not a procedure or T-SQL script.
I have a view where I'm using a series of conditions within a CASE statement to determine a numeric shipment status for a given row. In addition, I need to bring back the corresponding status text for that shipment status code.
Previously, I had been duplicating the CASE logic for both columns, like so:
Code Block...beginning of SQL view... shipment_status = CASE [logic for condition 1] THEN 1 WHEN [logic for condition 2] THEN 2 WHEN [logic for condition 3] THEN 3 WHEN [logic for condition 4] THEN 4 ELSE 0 END, shipment_status_text = CASE [logic for condition 1] THEN 'Condition 1 text' WHEN [logic for condition 2] THEN 'Condition 2 text' WHEN [logic for condition 3] THEN 'Condition 3 text' WHEN [logic for condition 4] THEN 'Condition 4 text' ELSE 'Error' END, ...remainder of SQL view...
This works, but the logic for each of the case conditions is rather long. I'd like to move away from this for easier code management, plus I imagine that this isn't the best performance-wise.
This is what I'd like to do:
Code Block ...beginning of SQL view... shipment_status = CASE [logic for condition 1] THEN 1 WHEN [logic for condition 2] THEN 2 WHEN [logic for condition 3] THEN 3 WHEN [logic for condition 4] THEN 4 ELSE 0 END,
shipment_status_text =
CASE shipment_status
WHEN 1 THEN 'Condition 1 text'
WHEN 2 THEN 'Condition 2 text'
WHEN 3 THEN 'Condition 3 text'
WHEN 4 THEN 'Condition 4 text'
ELSE 'Error'
END, ...remainder of SQL view...
This runs as a query, however all of the rows now should "Error" as the value for shipment_status_text.
Is what I'm trying to do even currently possible in T-SQL? If not, do you have any other suggestions for how I can accomplish the same result?
My stored procedure works perfectly when I run Query Analyser, but when I run my VB program I get the eror: I get the message : An SqlParameter with ParameterName '@total' is not contained by this SqlParameterCollection. Here is my stored Proc and my VB program is right below I- Stored Proc: CREATE PROCEDURE dbo.totalsub @account bigint,@total bigint outputASselect total=sum(SubPhnNmbr) from tblsub where SubAccNmbr=@accountreturnGO II- And my pogram in VB is: Dim totsub As Int64 Dim cm As New SqlCommand Dim cn As New MyConnection cn.open 'my connection is defined by me don't worry about it cm.CommandType = CommandType.StoredProcedure cm.CommandText = "totalsub" cm.Connection = cn Dim pm As SqlParameter pm = cm.Parameters.Add(New System.Data.SqlClient.SqlParameter("@Account", System.Data.SqlDbType.BigInt)) pm.Value = 100000165 pm = cm.Parameters.Add(New System.Data.SqlClient.SqlParameter("total", System.Data.SqlDbType.BigInt, 4)) pm.Direction = ParameterDirection.Output totsub = cm.Parameters("total").Value cm.ExecuteScalar() totsub = cm.Parameters("total").Value I also tried using @total instead of total and I tried ParameterDirection.ReturmValue instead of ParameterDirection.Output No Luck, someone pls can help
I am facing a problem that following query give me different result whenever I execute the query, it returns me same number of records but not all the rows are same everytime it is executed.
Select[Field1] From ( SelectRow_number() Over(Partition By [Field2], [Field3] Order By [Field2], [Field3], [Field4] Desc) ID, * From[dbo].[Table1] ) A WhereID > 1 OrderBy [Field1]
Those highlighted in yellow colours are duplicate records, I need to remove one of them.
Hi there everyone. I have a stored procedure called “PagingTable� that I use for performing searches and specifying how many results to show per ‘page’ and which page I want to see. This allows me to do my paging on the server-side (the database tier) and only the results that actually get shown on the webpage fly across from my database server to my web server. The code might look something like this:
The problem is the stored procedure actually returns two result sets. The first result set contains information regarding the total number of results founds, the number of pages and the current page. The second result set contains the data to be shown (the columns specified). In ‘classic’ ASP I did this like this.
'Open the recordset rsItems.Open strSQL, conn, 0, 1
'Get the values required for drawing the paging table intCurrentPage = rsItems.Fields("CurrentPage").Value intTotalPages = rsItems.Fields("TotalPages").Value intTotalRows = rsItems.Fields("TotalRows").Value
'Advance to the next recordset Set rsItems = rsItems.NextRecordset
I am trying to do this now in ASP.NET 2.0 using the datasource control and the repeater control. Any idea how I can accomplish two things:
A) Bind the repeater control to the second resultset B) Build a “pager� of some sort using the values from the first resultset
/*Subject: How to build a procedure that returns differentnumbers of columns as a result based on a parameter.You can copy/paste this whole post in SQL Query Analyzeror Management Studio and run it once you've made surethere is no harmful code.Currently we have several stored procedures which finalresult is a select with several joins that returns manycolumns (150 in one case, maybe around 50 the average).We have analyzed our application and found out that mostof the time not all the columns are used. We haveidentified 3 different sets of columns needed indifferent parts of the application.Let's identify and name these sets as:1- simple set, return the employee list for example2- common set, return the employee information (whichinclude the simple set)3- extended set, return the employee information (whichinlude the common set which itself includes the simpleset) + additional information from other tables, maybeeven some SUM aggregates and so on (I don't know forexample, how much sales the employee did so far).So the bigger sets contain the smaller ones. Please keepreading all the way to the bottom to better understandtechnically what we are trying.Here is a code sample of how our current procedureswork. Please note that the passing parameter we can eitherpass a Unique Identifier (PK) to retrieve a single record,or if we pass for example -1 or NULL we retrieve all theemployee records.*/create table a ( apk int primary key, af1 int, af2 int, af3 int, af4int, af5 int, af6 int)create table b ( bpk int primary key, bf1 int, bf2 int, bf3 int, bf4int, bf5 int, bf6 int)create table c ( cpk int primary key, cf1 int, cf2 int, cf3 int, cf4int, cf5 int, cf6 int)create table d ( dpk int primary key, df1 int, df2 int, df3 int, df4int, df5 int, df6 int)insert a values (1,1111,1112,1113,1114,1115,1116)insert a values (2,1211,1212,1213,1214,1215,1216)insert a values (3,1311,1312,1313,1314,1315,1316)insert a values (4,1411,1412,1413,1431,1415,1416)insert a values (5,1511,1512,1513,1514,1515,1516)insert a values (6,1611,1612,1613,1614,1615,1616)insert b values (1,2111,2112,2113,2114,2115,2116)insert b values (2,2211,2212,2213,2214,2215,2216)insert b values (3,2311,2312,2313,2314,2315,2316)insert b values (4,2411,2412,2413,2431,2415,2416)insert b values (5,2511,2512,2513,2514,2515,2516)insert b values (6,2611,2612,2613,2614,2615,2616)insert c values (1,3111,3112,3113,3114,3115,3116)insert c values (2,3211,3212,3213,3214,3215,3216)insert c values (3,3311,3312,3313,3314,3315,3316)insert c values (4,3411,3412,3413,3431,3415,3416)insert c values (5,3511,3512,3513,3514,3515,3516)insert c values (6,3611,3612,3613,3614,3615,3616)insert d values (1,4111,4112,4113,4114,4115,4116)insert d values (2,4211,4212,4213,4214,4215,4216)insert d values (3,4311,4312,4313,4314,4315,4316)insert d values (4,4411,4412,4413,4431,4415,4416)insert d values (5,4511,4512,4513,4514,4515,4516)insert d values (6,4611,4612,4613,4614,4615,4616)gocreate procedure original_proc @pk int asif @pk = -1set @pk = nullselecta.af1, a.af2, a.af3, a.af4, b.bf1, b.bf2, b.bf3, b.bf4, c.cf1, c.cf2,c.cf3, c.cf4, d.df1, d.df2, d.df3, d.df4fromajoin b on a.apk = b.bpkjoin c on b.bpk = c.cpkjoin d on c.cpk = d.dpkwherea.apk = ISNULL(@pk, a.apk)goexec original_proc 1go/*Currently the above SP is a single SP that is basicallyreturning ALL possible needed data. However most of thetime we might need to call and retrieve a simple employeelist.So we thought about modifying the stored procedure byadding an extra parameter that will indicate which setof columns to return.For modifying the stored procedure in order to get avariable name of columns returned and avoidingrepeating code, we built 4 objects: the storedprocedure being called, one table function and 2 views.One table function so that we are able to pass a parameter.The views since they do not accept parameters they arealways joined at least with the inline table function.The stored procedure generates in its body a dynamicSQL statement, where it queries the table function andthe views, depending which set is required. Here is acode sample of our current design (you need to run theprevious code in order for this to work).*/create function _1_set(@pk int)returns tableas return(select a.apk, a.af1, a.af2, a.af3, a.af4, b.bf1, b.bf2from ajoin b on a.apk = b.bpkwhere a.apk = ISNULL(@pk, a.apk))gocreate view _2_set asselect b.bpk, b.bf3, b.bf4, c.cf1, c.cf2from bjoin c on b.bpk = c.cpkgocreate view _3_set asselect c.cpk, c.cf3, c.cf4, d.df1, d.df2, d.df3, d.df4from cjoin d on c.cpk = d.dpkgocreate procedure new_proc @pk int, @set int asdeclare @sql nvarchar(4000)if @pk = -1set @pk = nullset @sql = 'select * from _1_set(@pk) fs 'if @set 1set @sql = @sql + 'join _2_set ss on fs.apk = ss.bpk 'if @set 2set @sql = @sql + 'join _3_set ts on ss.bpk = ts.cpk 'exec sp_executesql @sql, N'@pk int', @pkgoexec new_proc 1, 3go/*For executing the new procedure, we pass parameter 1for the smaller set, 2 for the medium size set or 3for the complete set.For example when we want to retrieve the common setwe pass the Unique Identifier of the employee to theSP and then we pass the type of set we want to useas the second parameter (1 for simple set, 2 forcommon set and 3 for extended set).The SP has the IF and dynamic SQL to add more JOINs.We would like to know what you think of this approachand if you know a simpler way of doing it.For cleaning up the test objects run the following code.*/drop procedure original_procdrop procedure new_procdrop function _1_setdrop view _2_setdrop view _3_setdrop table adrop table bdrop table cdrop table dAs always I would appreciate any feedback, opinion,comments, ideas and suggestions.Thank you
com.microsoft.sqlserver.jdbc.SQLServer Exception: A server cursor cannot be opened on the given statement or statements . Use a default result set or client cursor.
If a SP doesnt have a temp table, then there is no issue, SP executes perfectly, but if a SP has a temp table, this error occurs.
SP :
create proc testProcedure @countrCode varchar(3) as
select countryname INTO #TMPCOU from country where countryCode = @countrCode SELECT COUNTRYNAME FROM #TMPCOU
Working in Sql Server 2005,got 3 different table.Need to fetch the list of persons.A person can belong to different categories.When i am using inner join on tables i am getting the duplicate rows because a perosn can belong to different categories.I want that there should be only onoe row for the person and the different categories he belongs to can come up in single field as comma sepatated string Now the results are like this: firstname lastname adress category abc xyz aaa a abc xyz aaa b abc xyz aaa c I want like below: abc xyz aaa a,b,c I am thinking of using cursors in the stored procedure.Can you provide me the solution of this including the stored procedure..
I am using SLQ Server 2008 R2. The database was designed by another company.
I have two tables: Client and Client_Location. In the Client table the pk is Client_ID. There is also a unique key: sys_Client_ID. Both the Client_ID and the sys_Client_ID fields exist as a foreign keys in the Client_Location table. However, the fields are not noted as unique in the Client_Location table. There are two fields in the Client_Location table that determine when the address was effective. They are from_dt and end_dt.
Multiple records have been loaded into the Client_Location table to track old as well as current addresses of clients.
I'm trying to run a report that will pull clients with a plan_id constraint from the Client table and join the Client_Location table to retrieve the current address of these clients.
My SQL is:
select distinct (a.client_id), a.cli_last AS Last_Name, a.cli_first AS First_Name, a.cli_middle AS Mid_Init, b.city AS City, b.county AS County, b.state AS State from ECBH.dbo.tbl_Client a inner join ECBH.dbo.tbl_Client_Location b on a.client_id = b.client_id inner join ECBH.dbo.tbl_client_insurance c on a.client_id = c.client_id inner join ECBH_TEST.dbo.tbl_GEF_County d on b.county = d.COUNTY_NAME where c.plan_id = 4 order by a.cli_last, a.cli_first
Because multiple records exist in the Client_Location table, the result set has duplicates. How can I pull only the results where the from_dt is most recent?
How do I automatically assign a new cardcode-number? (according to the following formula: highest existing number + 1)
Scenario: -There are two types of business partners: Customers and Suppliers. -Customers have the value 'C' in the colomn CardType. -Suppliers have the value 'S' in the colomn CardType. -Customers have the following syntax 'C123456' in the colomn CardCode. -Suppliers have the following syntax 'S123456' in the colomn CardCode. -Existing CardCode-values in the DB for the Customers: C000001 - C100599. -Existing CardCode-values in the DB for the Suppliers: S000001 - S200199.
The idea is that when a user creates a new business partner, the CardCode should be automatically filled when a new assigned number (highest existing number + 1), according to the value that is selected in CardType (either the letter 'C' or 'S').
What's been done so far: SELECT top 1 (CASE WHEN CardType='C' THEN (SELECT top 1 'C' + '' + cast((substring(T0.CardCode, 2, 7) + 1) as varchar) as [nummer] FROM OCRD T0 WHERE T0. CardCode like 'C%' AND T0. CardType='C' order BY T0.CardCode desc FOR BROWSE) WHEN CardType='S' THEN (SELECT top 1 'S' + '' + cast((substring(T0.CardCode, 2, 7) + 1) as varchar) as [nummer] FROM OCRD T0 WHERE T0. CardCode like 'S%' AND T0. CardType='S' order BY T0.CardCode desc FOR BROWSE) END) FROM OCRD T0
The current result: The result that it gives is 'C100600'. The problem however is that it always gives this result and does not take into account what has been selected in CardType.
When I add the following: "order BY T0.CardCode desc FOR BROWSE" it gives the result 'S200200'.
So, what does work is that it takes the highest existing value and adds 1. But what doesn't work is the taking account what value is selected in CardType.
How to get the CASE results highlighted in BOLD into this equation; "(LogOut - LogIn) + (LunchBreak) -(AMBreak) + (PMBreak) AS TimeWorked" ? Thank you. CREATE VIEW dbo.vwu_ReportViewASSELECT EmployeeID , LastName , FirstName , LocationCode , UserID , Today , Login , AMBreakOut , AMBreakIn , CASE WHEN ISNULL(DATEDIFF(Minute, AMBreakOut, AMBreakIn),0) >= 0 AND ISNULL(DATEDIFF(Minute, AMBreakOut, AMBreakIn),0) <= 19 THEN '0' WHEN ISNULL(DATEDIFF(Minute, AMBreakOut, AMBreakIn),0) >= 20 AND ISNULL(DATEDIFF(Minute, AMBreakOut, AMBreakIn),0) <= 34 THEN '15' WHEN ISNULL(DATEDIFF(Minute, AMBreakOut, AMBreakIn),0) >= 35 AND ISNULL(DATEDIFF(Minute, AMBreakOut, AMBreakIn),0) <= 49 THEN '30' WHEN ISNULL(DATEDIFF(Minute, AMBreakOut, AMBreakIn),0) > = 50 AND ISNULL(DATEDIFF(Minute, AMBreakOut, AMBreakIn),0) <= 64 THEN '45' ELSE '60' END AS AMBreak , LunchOut , LunchIn , CASE WHEN ISNULL(DATEDIFF(Minute, LunchOut, LunchIn),0) >= 0 AND ISNULL(DATEDIFF(Minute, LunchOut, LunchIn),0) <= 66 THEN '0' WHEN ISNULL(DATEDIFF(Minute, LunchOut, LunchIn),0) >= 67 AND ISNULL(DATEDIFF(Minute, LunchOut, LunchIn),0) <= 81 THEN '15' WHEN ISNULL(DATEDIFF(Minute, LunchOut, LunchIn),0) >= 82 AND ISNULL(DATEDIFF(Minute, LunchOut, LunchIn),0) <= 96 THEN '30' WHEN ISNULL(DATEDIFF(Minute, LunchOut, LunchIn),0) >= 97 AND ISNULL(DATEDIFF(Minute, LunchOut, LunchIn),0) <= 111 THEN '45' WHEN ISNULL(DATEDIFF(Minute, LunchOut, LunchIn),0) >= 112 AND ISNULL(DATEDIFF(Minute, LunchOut, LunchIn),0) <= 126 THEN '60' ELSE '75' END AS LunchBreak, PMBreakOut , PMBreakIn , CASE WHEN ISNULL(DATEDIFF(Minute, PMBreakOut, PMBreakIn),0) >= 0 AND ISNULL(DATEDIFF(Minute, PMBreakOut, PMBreakIn),0) <= 19 THEN '0' WHEN ISNULL(DATEDIFF(Minute, PMBreakOut, PMBreakIn),0) >= 20 AND ISNULL(DATEDIFF(Minute, PMBreakOut, PMBreakIn),0) <= 34 THEN '15' WHEN ISNULL(DATEDIFF(Minute, PMBreakOut, PMBreakIn),0) >= 35 AND ISNULL(DATEDIFF(Minute, PMBreakOut, PMBreakIn),0) <= 49 THEN '30' WHEN ISNULL(DATEDIFF(Minute, PMBreakOut, PMBreakIn),0) >= 50 AND ISNULL(DATEDIFF(Minute, PMBreakOut, PMBreakIn),0) <= 64 THEN '45' ELSE '60' END AS PMBreak , Logout , Comments , LoginLogon , AMBreakOutLogon , AMBreakInLogon , LunchOutLogon , LunchInLogon , PMBreakOutLogon , PMBreakInLogon , LogoutLogon ,(LogOut - LogIn) + (LunchBreak) -(AMBreak) + (PMBreak) AS TimeWorked
I'm new to SQL Server and would like to add a calculated column to this query from the report writer in our ERP system based on the NextFreq case statement result.
Basically, I want to create a column called service with result as follows:
If IV.meter > NextFreq then the result should be 'OVERDUE' If (NextFreq - IV.meter) <50 then the result should be 'DUE SOON' Otherwise the result should be 'NOT DUE'
This is the code from the current report writer query:
Select IV.item, IV.meter, isnull(wt.name,0)as name, case when whh.meterstop is null then 0 end meterstop, whh.rejected, Case when cast(meterstop as int) > 0 then cast(meterstop as int) when meterstop is null then isnull(IV.meter,0) else isnull(IV.meter,0) end EndMeter, ISNULL(CAST(SUBSTRING(wt.name,1,4)as int),0) as LastFreq, case when whh.rejected = 1 then ISNULL(CAST(SUBSTRING(wt.name,1,4)as int),0) when ISNULL(CAST(SUBSTRING(wt.name,1,4)as int),0) = 0 then 100 when ISNULL(CAST(SUBSTRING(wt.name,1,4)as int),0) = 100
Hi, Please help me with an SQL Query that fetches all the records from the three tables but a unique record for each forum and topicid with the maximum lastpostdate. I have to bind the result to a GridView.Please provide separate solutions for SqlServer2000/2005. I have three tables namely – Forums,Topics and Threads in SQL Server2000 (scripts for table creation and insertion of test data given at the end). Now, I have formulated a query as below :- SELECT ALL f.forumid,t.topicid,t.name,th.author,th.lastpostdate,(select count(threadid) from threads where topicid=t.topicid) as NoOfThreads FROM Forums f FULL JOIN Topics t ON f.forumid=t.forumid FULL JOIN Threads th ON t.topicid=th.topicid GROUP BY t.topicid,f.forumid,t.name,th.author,th.lastpostdate ORDER BY t.topicid ASC,th.lastpostdate DESC Whose result set is as below:-
forumid topicid name author lastpostdate NoOfThreads
5 17 General NULL NULL 0 On modifying the query to:- SELECT ALL f.forumid,t.topicid,t.name,th.author,th.lastpostdate,(select count(threadid) from threads where topicid=t.topicid) as NoOfThreads FROM Forums f FULL JOIN Topics t ON f.forumid=t.forumid FULL JOIN Threads th ON t.topicid=th.topicid GROUP BY t.topicid,f.forumid,t.name,th.author,th.lastpostdate HAVING th.lastpostdate=(select max(lastpostdate)from threads where topicid=t.topicid) ORDER BY t.topicid ASC,th.lastpostdate DESC I get the result set as below:-
forumid topicid name author lastpostdate NoOfThreads
5 17 General NULL NULL 0 I want all the rows from the Forums,Topics and Threads table and the row with the maximum date (the last post date of the thread) as shown above. The scripts for creating the tables and inserting test data is as follows in an already created database:- if exists (select * from dbo.sysobjects where id = object_id(N'[dbo].[FK__Topics__forumid__79A81403]') and OBJECTPROPERTY(id, N'IsForeignKey') = 1) ALTER TABLE [dbo].[Topics] DROP CONSTRAINT FK__Topics__forumid__79A81403 GO if exists (select * from dbo.sysobjects where id = object_id(N'[dbo].[FK__Threads__topicid__7C8480AE]') and OBJECTPROPERTY(id, N'IsForeignKey') = 1) ALTER TABLE [dbo].[Threads] DROP CONSTRAINT FK__Threads__topicid__7C8480AE GO if exists (select * from dbo.sysobjects where id = object_id(N'[dbo].[Forums]') and OBJECTPROPERTY(id, N'IsUserTable') = 1) drop table [dbo].[Forums] GO if exists (select * from dbo.sysobjects where id = object_id(N'[dbo].[Threads]') and OBJECTPROPERTY(id, N'IsUserTable') = 1) drop table [dbo].[Threads] GO if exists (select * from dbo.sysobjects where id = object_id(N'[dbo].[Topics]') and OBJECTPROPERTY(id, N'IsUserTable') = 1) drop table [dbo].[Topics] GO CREATE TABLE [dbo].[Forums] ( [forumid] [int] IDENTITY (1, 1) NOT NULL , [name] [varchar] (255) COLLATE SQL_Latin1_General_CP1_CI_AS NOT NULL , [description] [varchar] (255) COLLATE SQL_Latin1_General_CP1_CI_AS NOT NULL ) ON [PRIMARY] GO CREATE TABLE [dbo].[Threads] ( [threadid] [int] IDENTITY (1, 1) NOT NULL , [topicid] [int] NOT NULL , [subject] [varchar] (100) COLLATE SQL_Latin1_General_CP1_CI_AS NOT NULL , [replies] [int] NOT NULL , [author] [varchar] (100) COLLATE SQL_Latin1_General_CP1_CI_AS NOT NULL , [lastpostdate] [datetime] NULL ) ON [PRIMARY] GO CREATE TABLE [dbo].[Topics] ( [topicid] [int] IDENTITY (1, 1) NOT NULL , [forumid] [int] NULL , [name] [varchar] (255) COLLATE SQL_Latin1_General_CP1_CI_AS NOT NULL , [description] [varchar] (255) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ) ON [PRIMARY] GO ALTER TABLE [dbo].[Forums] ADD PRIMARY KEY CLUSTERED ( [forumid] ) ON [PRIMARY] GO ALTER TABLE [dbo].[Threads] ADD PRIMARY KEY CLUSTERED ( [threadid] ) ON [PRIMARY] GO ALTER TABLE [dbo].[Topics] ADD PRIMARY KEY CLUSTERED ( [topicid] ) ON [PRIMARY] GO ALTER TABLE [dbo].[Threads] ADD FOREIGN KEY ( [topicid] ) REFERENCES [dbo].[Topics] ( [topicid] ) GO ALTER TABLE [dbo].[Topics] ADD FOREIGN KEY ( [forumid] ) REFERENCES [dbo].[Forums] ( [forumid] ) GO ------------------------------------------------------ insert into forums(name,description) values('Developers','Developers Forum'); insert into forums(name,description) values('Database','Database Forum'); insert into forums(name,description) values('Desginers','Designers Forum'); insert into forums(name,description) values('Architects','Architects Forum'); insert into forums(name,description) values('General','General Forum'); insert into topics(forumid,name,description) values(1,'Java Overall','Topic Java Overall'); insert into topics(forumid,name,description) values(1,'JSP','Topic JSP'); insert into topics(forumid,name,description) values(1,'EJB','Topic Enterprise Java Beans'); insert into topics(forumid,name,description) values(1,'Swings','Topic Swings'); insert into topics(forumid,name,description) values(1,'AWT','Topic AWT'); insert into topics(forumid,name,description) values(1,'Web Services','Topic Web Services'); insert into topics(forumid,name,description) values(1,'JMS','Topic JMS'); insert into topics(forumid,name,description) values(1,'XML,HTML','XML/HTML'); insert into topics(forumid,name,description) values(1,'Javascript','Javascript'); insert into topics(forumid,name,description) values(2,'Oracle','Topic Oracle'); insert into topics(forumid,name,description) values(2,'Sql Server','Sql Server'); insert into topics(forumid,name,description) values(2,'MySQL','Topic MySQL'); insert into topics(forumid,name,description) values(3,'CSS','Topic CSS'); insert into topics(forumid,name,description) values(3,'FLASH/DHTLML','Topic FLASH/DHTLML'); insert into topics(forumid,name,description) values(4,'Best Practices','Best Practices'); insert into topics(forumid,name,description) values(4,'Longue','Longue'); insert into topics(forumid,name,description) values(5,'General','General Discussion'); insert into threads(topicid,subject,replies,author,lastpostdate) values (1,'About Java Tutorial',2,'a@b.com','1/27/2008 02:44:29 PM'); insert into threads(topicid,subject,replies,author,lastpostdate) values (1,'Java Basics',0,'x@y.com','1/27/2008 02:48:53 PM'); insert into threads(topicid,subject,replies,author,lastpostdate) values (4,'Swings',0,'p@q.com','1/27/2008 03:12:51 PM');
Can anyone help me in modifying this select statement in order to add two more columns to see if the column is identity and if the column is indexed.
SELECT SUBSTRING(SYSOBJECTS.NAME, 1, 45) AS TABLE_NAME, SUBSTRING(SYSCOLUMNS.NAME, 1, 40) AS COLUMN_NAME, SUBSTRING(SYSCOLUMNS.NAME, 1, 15) AS DATA_TYPE, SYSCOLUMNS.LENGTH, SYSCOLUMNS.XPREC AS PRECISIONS, SYSCOLUMNS.XSCALE AS SCALE, SYSCOLUMNS.ISNULLABLE AS ALLOW_NULLS
FROM SYSREFERENCES RIGHT OUTER JOIN SYSCOLUMNS INNER JOIN SYSTYPES ON SYSCOLUMNS.XTYPE = SYSTYPES.XTYPE INNER JOIN SYSOBJECTS ON SYSCOLUMNS.ID = SYSOBJECTS.ID ON SYSREFERENCES.CONSTID = SYSOBJECTS.ID WHERE SYSOBJECTS.XTYPE <> 'S' and SYSOBJECTS.XTYPE <> 'V' AND SYSOBJECTS.XTYPE <> 'P' ORDER BY TABLE_NAME
I have a need to execute a SQL stmt on SQL 6.5 from a 7.0 box and vice versa. I know that in 7.0, you can create a remote server and execute statements across 7.0 servers, but can it be done from 6.5 to 7.0 and 7.0 to 6.5?
It's for a conversion project and time is the essence.
How do I use the select statement to create a blank field in a temp table, so I can use the update statement to populate the data later.
I tried [Select ' ' as field] and then tried the update statement to later populate data and I am getting the following error: Msg 8152, Level 16, State 14, Line 1 String or binary data would be truncated. The statement has been terminated.
does anyone have a script that cleans up profiler traces by removing the variables from tsql. thereby giving you the procedure text as written. I saw this a few months ago and havent had any luck in finding it.
I am using the kill statement to terminate a process, and this is done through my VB.net program. But I get the error
User does not have permission to use the KILL statement
This is the store procedure to call for kill statement..Is there any problem to execute it on dinamic sql?
CREATE PROCEDURE Kill_Process @DBName VARCHAR(100), @TableName VARCHAR(1000) AS SET NOCOUNT ON; DECLARE @spid smallint; DECLARE @spid2 smallint; DECLARE @loginame nchar(128); DECLARE @nsql NVARCHAR(4000); SET @loginame = 'xxxx'
EXEC Find_Lock_Info @DBName, @TableName
DECLARE ProcessCursor CURSOR FOR SELECT spid FROM master.dbo.sysprocesses WHERE dbid = db_id(@dbname) AND loginame = rtrim(@loginame) AND spid <> @@spid AND spid IN (SELECT spid FROM dbo.tbl_Lock_Info where dbid = db_id(@DBName) AND OBJECT_NAME(ObjId) = @TableName)
OPEN ProcessCursor; FETCH NEXT FROM ProcessCursor INTO @spid; WHILE @@FETCH_STATUS = 0 BEGIN SET @nsql = 'KILL ' + CONVERT(nvarchar,@spid) + ''; EXEC sp_executesql @nsql; FETCH NEXT FROM ProcessCursor INTO @spid; END CLOSE ProcessCursor; DEALLOCATE ProcessCursor; GO
CREATE PROCEDURE Find_Lock_Info @DBName VARCHAR(100), @TableName VARCHAR(1000) AS
SET NOCOUNT ON
BEGIN CREATE TABLE #tmpLockInfo ( spid SMALLINT, dbid SMALLINT, ObjId INT, IndIdSMALLINT, Type NCHAR(4), ResourceNCHAR(32), ModeNVARCHAR(8), StatusNVARCHAR(5) )
INSERT INTO #tmpLockInfo ( spid, dbid, ObjId, IndId, Type, Resource, Mode, Status ) EXEC Lock_Info
TRUNCATE TABLE tbl_Lock_Info
INSERT tbl_Lock_Info SELECT spid, dbid, ObjId, Type, Status FROM #tmpLockInfo WHERE dbid = db_id(@DBName) AND ObjId <> 0 AND OBJECT_NAME(ObjId) = @TableName
If @ReportID is NULL, insert a row into RubricReport table, and set @ReportID=@@IDENTITY; otherwise, update table RubricReport for columns LastUpdate and LastUpdateBy, and delete table RubricReportDetail where ReportID=@ReportID.
Table RubricReport has columns ReportID, County,Dsitrict, DataYears, LastUpdate and LastUpdateBy
Table RubricReportDetail has columns ReportID, IndicatorID, LocalPerf
I have a job that has several steps. One of the steps is of type T-SQL. I have an IF...ELSE block in it. If the if statement is true...perform an action. Else exit from the job reporting failure.
I would like to know what sql stmts should i use to exit from the job (in the ELSE block) I tried to use EXIT in the else stmt but it is not exiting from the job step.
select uid, OrderID, Count(OrderID)As DupCnt from OrdDetails group by uid, OrderID having count(OrderID) > 1
this returns no rows, can't I show another column to identify which uid goes with the dups, I did it before and now it doesn't work, probably something silly I'm missing.
assume connection is established and photo cloumn as data type as image in sql table.str_insert = "INSERT INTO SIS_TeachingStaff VALUES('TSMT2','V.RAJANIKANTH','LECTURER','TEACHING STAFF','Msc(Maths)','" & Emp_pic.Image &"' " cmd = New SqlCommand(str_insert, conn)cmd.Connection = conncmd.ExecuteNonQuery()Error at insert stmt: Operator '&' is not defined for types 'string' and 'system.drawing.image'
I'm trying to execute the following stmt within a Stored Procedure on SQL Server 2005 - SELECT DISTINCT PkgActions.[PKG ID] AS PKG_ID, [APPR STATUS] AS Status, [END EXEC DATE] AS "Exec Date", [COMMENT] AS Comment FROM [PkgActions] JOIN PkgApprovers ON PkgActions.[PKG ID] = PkgApprovers.[PKG ID] WHERE 1=1 and ([APPR STATUS] = 'approved' OR [APPR STATUS] = 'Denied')
It fails with the message - Incorrect syntax near 'approved'. However when I run the same stmt within the Query editor it works properly. I can't see what the SP doesn't like about this. Any thoughts?
I am trying to create a stored procedure for automating Bulk inserting into tables for one database to another. Is there any way i can pass the table name as variable to insert and select stmt
We have a MS SQL Server 6.5 database table with 643,000 records. There are several indexes including some clustered indexes.
We do a statement: update wo set udf3 = '1234567890123456' where woid = '123'
this returns immediately.
Then we try the same statement where the string is 1 character longer and it takes 45 minutes to return. There is no indication of what the server is doing during this time.
There is no index on UDF3 and WOID is the primary key.
Any suggestions what is happening? What can we do to correct it? DBCC CheckTable finds no errors.
name rows reserved data index_size unused -------------------- ----------- ------------------ ------------------ ------------------ ------------------ WO 643124 493418 KB 321580 KB 169824 KB 2014 KB
How to get recordset from only last SELECT stmt executed???
this is part of my code.. in T-Sql
Create proc some mySp ... AS ... set nocount on if (@SelUserID is null) select 0 else if (@SelUserID = @userID)
select 1
else begin
select * -- select a. from dms_prsn_trx_log where @incNo = ult_incid_no and prsn_trx_no = 10 and trx_log_txt = @logText if (@@rowcount != 0) set @isForwardedByUser = 1 select 2 -- select b. I NEED This value.
end set nocount off GO
here it executes select a, b. But, I want mySp return last executed select result. which is here "select 2"
I thought set nocount ON does that, but it doesn't. How can I do???
