Casting Decimal Number
May 12, 2006Hello,
When I declare a VB variable Dim s as Decimal,
I want to cast d like this :
1452,41
41,00
45,47
756544,04
Only with to digits after the ","
How can I perform this
Hello,
When I declare a VB variable Dim s as Decimal,
I want to cast d like this :
1452,41
41,00
45,47
756544,04
Only with to digits after the ","
How can I perform this
Hello!
I would like to cast (convert) data type decimal(24,4) to
decimal(21,4). I could not do this using standard casting function
CAST(@variable as decimal(21,4)) or CONVERT(decimal(21,4),@variable)
because of the following error: "Arithmetic overflow error converting
numeric to data type numeric." Is that because of possible loss of the
value?
Thanks for giving me any advice,
Ziga
The following line of SQL returns the first screen shot below.
((T0.TotalSales - ISNULL(T1.TotalSales, 0)) - (T0.StockValue - ISNULL(T1.StockValue, 0))) / (T0.StockValue - ISNULL(T1.StockValue, 0)) * 100 AS 'Gross Profit %'
I now want to limit the decimal places to two (2), and one might think that using a CAST operation here is the solution, as follows.
CAST(((T0.TotalSales - ISNULL(T1.TotalSales, 0)) - (T0.StockValue - ISNULL(T1.StockValue, 0))) / (T0.StockValue - ISNULL(T1.StockValue, 0)) * 100 AS decimal(15,2)) AS 'Gross Profit %'
However in actuality I am still seeing too many decimal places, but the extra ones have changed to ZEROS!
Ideally I would like to have no extra trailing zeros. How to achieve this?
in my sql, i want to change a decimal number to percent format number, just so it is convenient for users. for example there is a decimal number 0.98, i want to change it to 98%, how can i complete it?
thks
Does anybody know how could I calculate the new date(adding @c to @bor subtracting @b to @c), having for example a declaration like this:DECLARE @a CHAR(12)DECLARE @b DATETIMEDECLARE @c INTSET @b='3.04.04';SET @c=6and to calculate the number of days between two dates with this kindof declaration(@a-@b or @b - @a):DECLARE @a CHAR(12)DECLARE @b DATETIMEDECLARE @c INTSET @a='12.2.04';SET @b='3.04.04';Thanks in advance.
View 1 Replies View RelatedHello,How should I create a column to save data with the folowing format 10.10 or 10.20 or 10.30 or 150.30 or 10 or 150.It is basically process step in a diagram flow.I tried with decimal but with 10.10 , it removes automatically the 0.Thanks
View 2 Replies View Relatedi have 001747254 and 000096710 in column 'price'i want it to display as 17472.54 and 967.10how can i do this in one query?
View 4 Replies View Relatedthere is a column which type is float in a table, i want to set the precision of its value, for example if its value is 10.333888, i want to get its value as 10.33, how to complete it in a select Sql?
thks
How do you display 12.38 as 1238 I can't use round.
View 2 Replies View RelatedI have just loaded my db table from an excel file using the import wizard. Prior to the import, I set my data types and in the field that I need a number with 1 decimal place I chose a decimal data type.
Made since to me
However, now my numbers do not have the decimals.
Please help.
How can I round up a decimal number? in SSRS reports.
View 7 Replies View RelatedHi all,
I am sorry if i am posting this error in an inappropriate froum.
Well in my asp.net intranet web application i want to enter a number to the database(sql sever 2005) that has a column(schoolkm) whose type is decimal(9, 2). Now if i want to enter the value 1.5 in the text box and enter that value to the database through interface then that value automatically rounds to 2. But when i get into the table and enter that value by hand then that value enters perfectly i.e. without rounding of. I want to know the reason and how can i cure this problem.
Regards & thanks in advance
Hello,
Nice easy one (hopefully) from a newbie on SQL 2000.
I have a table HolidayTakenBooked which is populated from a stored procedure via the following statement;
TRUNCATE TABLE HolidayTakenBooked
INSERT INTO HolidayTakenBooked
SELECT * FROM #TMP_HolidayTakenBooked ORDER BY ABR_Clock_No
I am finding that for certain values in the HolidayTakenBooked table decimals are not being transferred correctly. ie. 0.5 in the TMP table appears as 1 in the HolidayTakenBooked table.
I'm pretty sure that this is down to the data definition of the table see sample field below;
[HOL_DaysTaken1] [decimal](18, 0) NULL ,
So the simple question here is how do I define decimal places when I define a new table. When designing a new table in Enterprise Manager I select decimal and the server does not allow me to change the value of 9 it defaults to.
What simple thing I am not doing ?
Cheers
Neal
Hi all,
I executed the following sql code in my SQL Server Management Studio Express (SSMSE):
-- myCSV1.sql --
USE MyDatabase
GO
CREATE TABLE myCSVtable
(
Col1 int,
Col2 nvarchar(25),
Col3 nvarchar(25),
Col4 decimal (9.3),
)
BULK INSERT myCSVbulk
FROM 'c:myfile.csv'
WITH
(
FIELDTERMINATOR = ',',
ROWTERMINATOR = ''
);
GO
=====================================
I got the following error message:
Msg 102, Level 15, State 1, Line 6
Incorrect syntax near '9.3'.
How can I set the statement "Col4 decimal (9.3)" right? Please help and advise.
Thanks in advance,
Scott Chang
Hi..
I have a column in the data base with the type Float,
I want to limit the number of digits after decimal point to 2 when I display the value in ASP.NET but I don't know how!?
the number that appear after calculation llike "93.333333"
I use decimal(2,2) as data type but an error accour and this is the message
"- Unable to modify table. Arithmetic overflow error converting float to data type numeric.The statement has been terminated."
Can you help me..
thanks
I have a table with a column named measurement decimal(18,1). If the value is 2.0, I want the stored proc to return 2 but if the value is 2.5 I want the stored proc to return 2.5. So if the value after the decimal point is 0, I only want the stored proc to return the integer portion. Is there a sql function that I can use to determine what the fraction part of the decimal value is? In c#, I can use
dr["measurement "].ToString().Split(".".ToCharArray())[1] to see what the value after the decimal is.
I am working with a legacy SQL server database from SQL Server 2000. I noticed that in some places that they use decimal data types, that I would normally think they should be using integer data types. Why is this does anyone know?
Example: AutomobileTypeId (PK, decimal(10,0), not null)
I am creating a table on SQL Server. One of the columns in this new table contains whole integer as wells as decimal values (i.e. 4500 0.9876). I currently have this column defined as Decimal(12,4). This adds 4 digits after the decimal point to the whole integers. Is there a data type that will have the decimal point only for decimal values and no decimal point for the whole integers?
View 2 Replies View RelatedHello.
My database stores the decimals in Spanish format; "," (comma) as decimal separator.
I need to convert decimal nvarchar values (with comma as decimal separator) as a decimal or int.
Any Case using CAST or CONVERT, For Decimal or Int gives me the following error:
Error converting data type varchar to numeric
Any knows how to resolve.
Or any knows any parameter or similar, to indicate to the Cast or Convert, that the decimal separator is a comma instead a dot.
I wanted to convert a dataset from vb.net (2.0) to an .XLS file, by MS Jet. My national standard is using decimal commas, not decimal points for numbers signing the beginning of decimal places.
But the MS Jet Engine uses decimal point,in default. Therefore, in the Excel file only string formatted cells can welcome this data, not number formatted.
How can I solve or get around this problem? (with jet if it possible)
iviczl
I'd like to convert a Decimal value into a string so that the entireoriginal value and length remains intact but there is no decimal point.For example, the decimal value 6.250 is selected as 06250.Can this be done?
View 6 Replies View RelatedHi all,
I am designing some reports for a German branch of my company and need to replace decimal point with a comma and the thousand comma seperator with a decimal point.
e.g.
‚¬1,500,123.00 to ‚¬1.500.123,00
Is there a property that I can change in the report designer to allow this to happen or is this something I need to convert in a Stored Proc.
Any help would be much appreciated
Thanks!
I need to store decimal values: decimal(20,15) in my SQL Server 2005 database.
I load data from flat file, convert it using Data Conversion Task to decimal(with scale: 15) and try to save it using OLE DB Destination.
It works fine for 4 digits after the decimal (like 1.1234), but always failes for more than 4 digits (1.12345).
Is the decimal limited to scale 4 ???
Thank you for your help!
Anna
Hi,
I am having a file in which amount fields are given in a Packed Decimal format. Can anyone suggest me how I can read this data element from the file and convert it into SQL decimal datatype.
File is a fixed length. All the amount fields are given in Packed Decimal Format and rest of the fields are given in text format.
How can i identify and convert only those packed decimals using SQL/.Net.
Example : a row in a file that has some packed decimals
158203508540188236252EUR20BZK0030 Å“&
20060715 0001010100010101
Please help!
Thanks
Mirudhu
Can someone please help me with this? I'm losing all my hair trying to figure it out. I've tried all that I can think of. I am getting the Error converting data type varchar to numeric.
Thanks
Sam "O"
cmdInsert = New SqlCommand( "INSERT INTO tmp_blank (sessionid, ssn,job,sun,mon,tue,wed,thu,fri,sat,totcol)
SELECT '" & Session.SessionId & "', ssn,job,sun,mon,tue,wed,thu,fri,sat,
(cast(sun as numeric(4,2)) + cast(mon as numeric(4,2)) +
cast(tue as numeric(4,2)) + cast(wed as numeric(4,2)) +
cast(thu as numeric(4,2)) + cast(fri as numeric(4,2)) +
cast(sat as numeric(4,2))) as totcol from
" & strTableName, conTimeCard)
intUpdateCount = cmdInsert.ExecuteNonQuery()
Hello,
I'm new to SQL Server and I have to finish a VB.Net program from an employee that has left the company.
I have a table with column 'vanafdatum' witch has datatype char but they stored only dates in this column ( like this: 13/09/2006).
When I try to run the next querie I receive an error message "The conversion of a char data type to a datetime data type resulted in an out of range datetime value".
This is the querie I try to run
SELECT MAX(CAST(vanafdatum AS datetime)) AS vanaf_datum
FROM tarieven
WHERE (vanafdatum <
(SELECT getdate()))
Is there any way I can cast the char datatype to a datetime datatype without getting this error.
I allready tried to change the data type from char to datetime, but doesn't work either.
A possible solution is to erase the column an manually fill in all the fields again in the data type datetime, but that seems a little stupid to do.
So I wonder if there is a solution that can change the data type for all rows in the database without losing any data.
I've got an ftp task that will be downloading a couple of files each night. today they're called
blah20060830blah
the date value in the middle changes each day. I'm trying to adjust this value with an expression. The expression doesn't want to cast my getdate function into a string that this property will accept. I know i'm missing something stupid.
Thank you
Hi,
I would like to know if casting is supported in SQL Server Compact Edition. I get an error when i attempt to cast a datetime or bigint value to nvarchar or ntext. CAST(datetime AS nvarchar(15))
Does anybody knows if its supported or how could i cast values?
Thank you
Hi,I've come across a problem that requires i cast a string to a date, had a go but can't get it to work properly.SELECT EventID, EventName, EventShortDesc, EventLink, EventStartDateFROM dbo.tbl_EventWHERE (CAST EventStartDate AS DATE) > GetDate()ORDER BY EventStartDate DESCBasically i only want events which haven't expired (were before the current date) to be returned. EventStartDate is held as an varchar(10) therefore needs to be cast before i can compare. Is this the best way or is there a better one? If it is how do i get it to work?Any help would be great thanks,drazic19
View 2 Replies View RelatedHi All
My brain has truned to mush at the moment.
:(
I want to sort on a char(5) column with data in it that looks like
01/07
05/02
06/01
12/01
07/98
so it comes out in the human date order.
e.g
07/98
06/01
12/01
05/02
01/07
--
David
Hi all,
I'm trying Insert data using INSERT INTO kind of like below
INSERT INTO table1(
col1
col2
col3
col4)
SELECT
col1
col2
col3
col4
FROM
Server.DB.table2
say, col3 from table 1 is numeric (28,8) and col3 from table 2 is float.
how do I cast this so it works??
thank you!
Just a question about multi casting.
If I create a copy of a data set using a multi cast, do operations on one of the output sets effect the other output set?
For example, in one ouput set I'm setting a column to NULL - this is actually updating the other set as well. Is this meant to happen?
Thanks!!
Can anyone see what's wrong with this transformation?
((DT_STR)([IN-DLN]))
I'm trying to cast DLN as a string, but I keep getting a parsing error in the derived column tranformer...
Thanks!
Jim Work