Challenging Select Statement (urgent)

Feb 6, 2008

Here is table dbo.vw_TimebyProjectAll

proj_name res_name yr SumOfHours
x Mike 2007 1
x Mike 2008 2
x Mike 2008 3


Here is table dbo._LastWeekTotalHours

proj_name res_name yr td_hours Week
x Mike 2007 1 1
x Mike 2008 2 8
x Mike 2008 3 9

now here is what the output should look like

Lets assume the user well enter 8 for week number

proj_name res_name totalHours LastWeekHours
x Mike 6 2
Y AJ .. €¦.

I am trying to write a select statement for that:

Here is what I have:

SELECT a.proj_name, a.res_name,a.TotalHours,g.TotalHours as LastWeekhours
FROM

Line 1( SELECT r.proj_name,r.res_name, SUM(r.td_hours) AS TotalHours FROM
line 2 dbo._LastWeekTotalHours as r, _vw_Employee as e
Line 3 WHERE e.RES_NAME = r.res_name and r.Week = 5 and r.yr = 2008
Line 4 GROUP BY r.proj_name, r.res_name ) as g

Line 5(SELECT r.proj_name, r.res_name, r.TotalHours
Line 6 FROM
Line 7 (SELECT proj_name, res_name, SUM(td_hours) AS TotalHours FROM
line 8 dbo._LastWeekTotalHours
line 9 GROUP BY proj_name, res_name ) r ,
line 10 (SELECT proj_name, res_name, SUM(SumOfHours) AS TotalHours FROM
dbo.vw_TimebyProjectAll
line13 GROUP BY proj_name, res_name )w
)a

if i excute line 1 - 4 i will get the last week hour correctly
if i excute line 5 - 13 i will get the totalhours correctly





my problem i can't put these two pieces work togather. feel free to re-write the select statment
thanks

View 14 Replies


ADVERTISEMENT

Challenging Select Statement

Jan 10, 2008

Here is the table A:
Week Year Name
1 2007 x
2 2007 b
3 2007 d
4 2007 d
5 2007 d
6 2007 d
7 2007 d
1 2008 h

This table goes all the way to week 52. I have only 2007 and 2008. so when the user pass start week :1 end week:4 start year 2007 end year 2007
The report will come out something like this

Week Year Name
1 07
2 07
3 07
4 07


Here is the select statement for that
Select week,year,name from dbo.A
Where Week between @startWeek and @endWeek in this case 1 and 4

The real challenge is if the user enters the following input
start week :49 end week:1 start year 2007 end year 2008
in the case the report should look something like this

Week Year Name
49 07
50 07
51 07
52 07
1 08

How can I accomplish such thing in my select statement? I did create a function to handle such scenario but it did not work out.
Any thoughts!
Thanks

View 9 Replies View Related

Challenging: Cross Tab In SQL 2000 (Urgent)

Oct 8, 2007



I have the following table dbo.Test

Name Week Type Hours
Steve 1 Section_1 1

Steve 1 Section_1 2

Steve 2 Section_2 5

Sarah 1 Section_1 1

Sarah 2 Section_2 2

Sarah 2 Section_3 3

Mike 3 Section_3 1

Mike 1 Section_3 1


I know for a fact i am going to have no more than 3 sections

here is the output i would like to see


Name Week1 Section_1 Section_2 Section_3 Total

Steve 1 3 3

Steve 2 5 5

Sarah 1 1 1

Sarah 2 2 3 5

Mike 1 1 1

Mike 3 1 1


I read some articles but i am still confused.

thanks in advance for your help

View 6 Replies View Related

Urgent: BETWEEN In A SELECT Statement

Jan 25, 2007

Hi, i wanted to take all the orderID that fall between a certain date. I was thinking of using this syntax... Dim sql as string = "SELECT orderID " & _
"FROM orders " & _
"WHERE orderDate BETWEEN 11/11/2007 AND 15/11/2007"
 in my database i set the date to nvarchar, not date... so will this syntax works??
thx

View 14 Replies View Related

Select Statement (urgent)

Nov 1, 2007

my current stored procedure generates the following data

name type hours
Mike A 1
Mike A 2
Mike A 1
Bob A 1

Bob B 3


what i want is this:



name type hours
Mike A 4

Bob B 1

Bob B 3



and here is what i have

select departmet,name,sum(hours),

Case


when.... then .......

when.... then .......

when.... then .......

Else 'A'

End as Type

from tableA

Group by departmet,name


Any thoughts!
Thnks



View 8 Replies View Related

Using Case In A Select Statement,urgent!

Feb 15, 2002

Hi All,

I need a hand in this script.
SELECT a.id ,value = CASE
when (x1-x0) = 0 then
((Y2-Y0)-(Y1-Y0))/(0.000000001*(X2-X0))
ELSE
((-111.48277-Y0)-(Y1-Y0))/((X1-X0)*(32.72383-X0))
END
,value2 = CASE
when (x1-x0) = 0 then
((Y2-Y0)-(Y1-Y0))/(0.000000001*(X2-X0))
ELSE
((-111.48277-Y0)-(Y1-Y0))/((X1-X0)*(32.72383-X0))
END
FROM table_name a
where value > 0
ORDER BY VALUE

The problem I'm having is in the where clause. Because the value is not a column name sql server is giving me an error. I need to evaluate the value returned. How can I get around this problem? Any sort of advise will help!
Thank you in advance!

View 1 Replies View Related

Stored Procedure In SELECT Statement?? Urgent

Sep 26, 2001

I have a stored procedure in an Informix-database that returns a string. Its used in a SELECT statement like this.
SELECT t1.id, t2.id, sp_name(t1.id, t2.id) FROM table1 t1, table2 t2

I want to write it in SQLserver. I have tried this syntax but get error.
Server: Msg 170, Level 15, State 1, Line 1
Line 1: Incorrect syntax near 't'.

SELECT t1.id, t2.id, dbo.sp_name(t1.id, t2.id, "") FROM table1 t1, table2 t2

Can I use stored proc in this way in SQL-server?

View 2 Replies View Related

How To Form A Single SQL Statement In A Datalist For A Challenging And Convoluted Problem ?

Aug 26, 2007

Hello, I'm really stuck at trying to figure out how to write out the proper SQL statement for my problem.   I'm relatively new to SQL, so this may not be so tough for some of you.  Basically, a user logs in (I'm using the default membership provider) and goes to his INBOX to see his list of messages sent to him.  The list is presented to him via a datalist.  Each item of the datalist contains a table of 2 columns and 1 row as pictured below.  The first box contains the user photo and user name of the person who SENT him the message (not the logged in user).  The second box contains the subject title of the message.
      FROM        |    SUBJECT   |  User Photo     |                    ||                       |    Subject     ||  User Name     |                    |
Here is the list of the relevant 4 tables of my database and the relevant fields.....
aspnet_Users tableUserId (used to link to Member table)UserName 
Member tablememberId (int - primary key)UserId (guid - used to link to aspnet_Users table)primaryPhotoId (int - used to link to Photo table)
Photo tablephotoId (int - primary key)photoUrl (string - path to file on local drive)
Message tablemessageId (int - primary key)fromMember (int - connects with memberId from Member table)toMember (int - connects with memberId from Member table)subject (varchar(max))
So basically, from a simplistic high level point of view, the datalist is going to list all of the messages where Message.toMember = the logged in user.  The senders will be determined by the Member.fromMember fields.  Intuitive enough so far, I guess.   This is the SQL statement I have so far.....
SELECT aspnet_Users.UserName, Message.subjectFROM aspnet_Users, Member, MessageWHERE aspnet_Users.UserName = Profile.UserName AND aspnet_Users.UserId = Member.UserId AND Member.memberId = Message.toMember
Note that I'm grabbing the logged in user info from Profile.UserName.  So far, this SQL statement should make the datalist crank out all messages that were sent to the logged in user.  HOWEVER, how would I modify this so that the datalist generates the username of the sender, NOT the receiver (aka person who logged in)?  Do you see the core of my dilemna here?  I'm trying to get a resultset based on the Message.toMember (the logged in user), but also want data on the sender (the Message.fromMember so I can use the username and the photo of the SENDER, not the person logged in aka the RECEIVER).  Currently, the aspnet_Users in the SELECT statement gets the username of the logged in person, not the sender.
And once we solve the issue of retrieving the sender's username, I also have to get his MAIN photo (I say "main" since a user can have multiple photos and the main one is determined by the value in a given member's primaryPhotoId field of the Member table) ??  I'm a newbie to ASP.NET and to databases in general so this may not be as tough for most of you and perhaps you're laughing at the simplicity hehe.   The SQL statement so far asks to retrieve information based on the logged in user.  But how do I also tell it to now go grab the Message.fromMember data, go back to the Member table to A)get the username after going back to the aspnet_Users table and B) to get the Member.primaryPhotoId, and then finally to the Photo table where the Photo.photoUrl string value is obtained..... and still hang on to the results I have up until now?  And since I'm using the provided datalist control, I think I need to get all the results I need with just one SQL statement.  This is indeed very very complicated for me lol.
This problem has been giving me migraines this whole weekend.  Has anyone been through such a problem before?  Any help would be greatly appreciated - thanks in advance.

View 22 Replies View Related

Select Statement Within Select Statement Makes My Query Slow....

Sep 3, 2007

Hello... im having a problem with my query optimization....

I have a query that looks like this:


SELECT * FROM table1
WHERE location_id IN (SELECT location_id from location_table WHERE account_id = 998)


it produces my desired data but it takes 3 minutes to run the query... is there any way to make this faster?... thank you so much...

View 3 Replies View Related

Multiple Tables Used In Select Statement Makes My Update Statement Not Work?

Aug 29, 2006

I am currently having this problem with gridview and detailview. When I drag either onto the page and set my select statement to pick from one table and then update that data through the gridview (lets say), the update works perfectly.  My problem is that the table I am pulling data from is mainly foreign keys.  So in order to hide the number values of the foreign keys, I select the string value columns from the tables that contain the primary keys.  I then use INNER JOIN in my SELECT so that I only get the data that pertains to the user I am looking to list and edit.  I run the "test query" and everything I need shows up as I want it.  I then go back to the gridview and change the fields which are foreign keys to templates.  When I edit the templates I bind the field that contains the string value of the given foreign key to the template.  This works great, because now the user will see string representation instead of the ID numbers that coinside with the string value.  So I run my webpage and everything show up as I want it to, all the data is correct and I get no errors.  I then click edit (as I have checked the "enable editing" box) and the gridview changes to edit mode.  I make my changes and then select "update."  When the page refreshes, and the gridview returns, the data is not updated and the original data is shown. I am sorry for so much typing, but I want to be as clear as possible with what I am doing.  The only thing I can see being the issue is that when I setup my SELECT and FROM to contain fields from multiple tables, the UPDATE then does not work.  When I remove all of my JOIN's and go back to foreign keys and one table the update works again.  Below is what I have for my SQL statements:------------------------------------------------------------------------------------------------------------------------------------- SELECT:SELECT People.FirstName, People.LastName, People.FullName, People.PropertyID, People.InviteTypeID, People.RSVP, People.Wheelchair, Property.[House/Day Hab], InviteType.InviteTypeName FROM (InviteType INNER JOIN (Property INNER JOIN People ON Property.PropertyID = People.PropertyID) ON InviteType.InviteTypeID = People.InviteTypeID) WHERE (People.PersonID = ?)UPDATE:UPDATE [People] SET [FirstName] = ?, [LastName] = ?, [FullName] = ?, [PropertyID] = ?, [InviteTypeID] = ?, [RSVP] = ?, [Wheelchair] = ? WHERE [PersonID] = ? ---------------------------------------------------------------------------------------------------------------------------------------The only fields I want to update are in [People].  My WHERE is based on a control that I use to select a person from a drop down list.  If I run the test query for the update while setting up my data source the query will update the record in the database.  It is when I try to make the update from the gridview that the data is not changed.  If anything is not clear please let me know and I will clarify as much as I can.  This is my first project using ASP and working with databases so I am completely learning as I go.  I took some database courses in college but I have never interacted with them with a web based front end.  Any help will be greatly appreciated.Thank you in advance for any time, help, and/or advice you can give.Brian 

View 5 Replies View Related

SQL Server 2012 :: Create Dynamic Update Statement Based On Return Values In Select Statement

Jan 9, 2015

Ok I have a query "SELECT ColumnNames FROM tbl1" let's say the values returned are "age,sex,race".

Now I want to be able to create an "update" statement like "UPATE tbl2 SET Col2 = age + sex + race" dynamically and execute this UPDATE statement. So, if the next select statement returns "age, sex, race, gender" then the script should create "UPDATE tbl2 SET Col2 = age + sex + race + gender" and execute it.

View 4 Replies View Related

Using Conditional Statement In Stored Prcodure To Build Select Statement

Jul 20, 2005

hiI need to write a stored procedure that takes input parameters,andaccording to these parameters the retrieved fields in a selectstatement are chosen.what i need to know is how to make the fields of the select statementconditional,taking in consideration that it is more than one fieldaddedfor exampleSQLStmt="select"if param1 thenSQLStmt=SQLStmt+ field1end ifif param2 thenSQLStmt=SQLStmt+ field2end if

View 2 Replies View Related

TSQL - Use ORDER BY Statement Without Insertin The Field Name Into The SELECT Statement

Oct 29, 2007

Hi guys,
I have the query below (running okay):



Code Block
SELECT DISTINCT Field01 AS 'Field01', Field02 AS 'Field02'
FROM myTables
WHERE Conditions are true
ORDER BY Field01

The results are just as I need:


Field01 Field02

------------- ----------------------

192473 8461760

192474 22810



Because other reasons. I need to modify that query to:



Code Block
SELECT DISTINCT Field01 AS 'Field01', Field02 AS 'Field02'
INTO AuxiliaryTable
FROM myTables
WHERE Conditions are true
ORDER BY Field01
SELECT DISTINCT [Field02] FROM AuxTable
The the results are:

Field02

----------------------

22810
8461760

And what I need is (without showing any other field):

Field02

----------------------

8461760
22810


Is there any good suggestion?
Thanks in advance for any help,
Aldo.

View 3 Replies View Related

How To Write Select Statement Inside CASE Statement ?

Jul 4, 2006

Hello friends,
I want to use select statement in a CASE inside procedure.
can I do it? of yes then how can i do it ?

following part of the procedure clears my requirement.

SELECT E.EmployeeID,
CASE E.EmployeeType
WHEN 1 THEN
select * from Tbl1
WHEN 2 THEN
select * from Tbl2
WHEN 3 THEN
select * from Tbl3
END
FROM EMPLOYEE E

can any one help me in this?
please give me a sample query.

Thanks and Regards,
Kiran Suthar

View 7 Replies View Related

Transact SQL :: Update Statement In Select Case Statement

May 5, 2015

I am attempting to run update statements within a SELECT CASE statement.

Select case x.field
WHEN 'XXX' THEN
  UPDATE TABLE1
   SET TABLE1.FIELD2 = 1
  ELSE
   UPDATE TABLE2
   SET TABLE2.FIELD1 = 2
END
FROM OuterTable x

I get incorrect syntax near the keyword 'update'.

View 7 Replies View Related

If Statement Help - For Jun (Urgent)

Oct 22, 2001

Jun,

Thank you for your help but when I put the NOT IN like you suggested I am still getting the error of:

Subquery returned more than 1 value. This is not permitted when the subquery follows =, !=, <, <= , >, >= or when the subquery is used as an expression.

Here is the code again:

--If a request is not equal to the request from Jason's table then populate the table.
if (select REQUEST from TEAM3B_PULL_TOTAL_TST) Not In (select REQUEST from REQUEST_BUS_REQ_TST)
begin
Insert into REQUEST_BUS_REQ_TST (b.request,b.business_req_id,b.bus_test,b.test_cas e_id,b.test_case_source,b.test_case_descr)
select a.request,a.business_req_id,a.bus_test,a.test_case _id,a.test_case_source,a.test_case as test_case_description
from TEAM3B_PULL_TOTAL_TST as A JOIN REQUEST_BUS_REQ_TST AS B ON A.REQUEST = B.REQUEST
Order by b.REQUEST,b.BUSINESS_REQ_ID,b.TEST_CASE_ID
end

View 3 Replies View Related

HELP With SQL Statement...urgent!

Jul 23, 2005

Hi,I have a table that lists all attempts at logging in to a server.Columns are:userid, firstname, lastname, login_date, login_timeIf a user attempted to login 5 times, then I want to return the row(with all columns)......BUT I only want to return the row with the 5th time attempted.something like this:select * from mytablejoinselect userid, login_date from mytablegroup by userid, login_date having count(*) > 4BUT, how do I get just the 5th time attempted??Thanks!Skiz

View 2 Replies View Related

How To Use Select Statement Inside Insert Statement

Oct 20, 2014

In the below code i want to use select statement for getting customer

address1,customeraddress2,customerphone,customercity,customerstate,customercountry,customerfirstname,customerlastname

from customer table.Rest of the things will be as it is in the following code.How do i do this?

INSERT INTO EMImportListing ("
sql += " CustId,Title,Description,JobCity,JobState,JobPostalCode,JobCountry,URL,Requirements, "
sql += " IsDraft,IsFeatured,IsApproved,"
sql += " Email,OrgName,customerAddress1,customerAddress2,customerCity,customerState,customerPostalCode,

[code]....

View 1 Replies View Related

Help With Delete Statement/converting This Select Statement.

Aug 10, 2006

I have 3 tables, with this relation:
tblChats.WebsiteID = tblWebsite.ID
tblWebsite.AccountID = tblAccount.ID

I need to delete rows within tblChats where tblChats.StartTime - GETDATE() < 180 and where they are apart of @AccountID. I have this select statement that works fine, but I am having trouble converting it to a delete statement:

SELECT * FROM tblChats c
LEFT JOIN tblWebsites sites ON sites.ID = c.WebsiteID
LEFT JOIN tblAccounts accounts on accounts.ID = sites.AccountID
WHERE accounts.ID = 16 AND GETDATE() - c.StartTime > 180

View 1 Replies View Related

Select Statement Problem - Group By Maybe Nested Select?

Sep 17, 2007

Hey guys i have a stock table and a stock type table and what i would like to do is say for every different piece of stock find out how many are available The two tables are like thisstockIDconsumableIDstockAvailableconsumableIDconsumableName So i want to,Select every consumableName in my table and then group all the stock by the consumable ID with some form of total where stockavailable = 1I should then end up with a table like thisEpson T001 - Available 6Epson T002 - Available 0Epson T003 - Available 4If anyone can help me i would be very appreciative. If you want excact table names etc then i can put that here but for now i thought i would ask how you would do it and then give it a go myself.ThanksMatt 

View 2 Replies View Related

(Urgent) Help Need With Update Statement

Jan 9, 2008

Hi,
I want the PlanId in 6 tables and is there is a way i can provide a statement...
 
Update TableName
  SET Plan_NUM = '279-072230'Where
Plan_NUM = '120003'
but i need to provide mulitple plan_NUM??
 
REgards
Karen

View 33 Replies View Related

(urgent) Help Needed For This Insert Statement

Nov 6, 2007

Hi,
   I am trying to insert the Source name and clientId to a table called clientSource...
 
The User will send in some Dbf File.... So in a particular file called PlanDbf.. I have the following fields
PlanNumber, Name,                   SRC1Name,           SRC2Name,                       SRC3Name....      SRC20Name
170234         Constructions         Employee Deferral   Employer Discretionary      Employer Matching....
 
And in another table called SourceDBF i have the following fields with data
PlanNumber             PARTID   SOURCE_NUM    etc...
170234              123456789         1
170234              123456789         3
170234              451231334         1
So how do i match the Source_NUM with SRCnames when i insert it into the table..
INSERT INTO Statement..ClientSource(@ClientId,                SourceName)SELECT                   s.SOURCE_NUM FROM SourceDBF ..
 but i am stuck..
any help will be appreciated.
Regards
Karen

View 7 Replies View Related

(URgent) My Update Statement Is Not Working..

Dec 17, 2007

Hi..
I have inserted couple of data in a particular table which is as follows..
Portfolio Table
PortId PlanId  PortfolioName                           PorfolioDescription  ClientPortolioId




771
17838
BALPORT                                           
NULL
NULL

772
17838
HIGHGROW                                          
NULL
NULL

773
17838
MODGROW                                           
NULL
NULLMy FundDBF is as follows
 RowNumber  FUND_ID            f.ASSETDESC                    Import




20
BALPORT        
              
Balanced                                      
True

21
MODGROW        
              
Moderate Growth                               
True

22
HIGHGROW       
              
High Growth                                   
True
and this is my Update statement UPDATE
Statements..PlanPortfolio
SET
PlanId = pm.PlanId,
PortfolioName = pm.FUND_ID,
PortfolioDescription = pm.ASSETDESC
FROM
Statements..PlanPortfolio p
Join (
SELECT DISTINCT
p.PlanId,
pd.FUND_ID,
f.ASSETDESC ---pd.FUND_ID
FROM
PartDBF pd
INNER JOIN Statements..ClientPlan p
on pd.PLAN_NUM = p.ClientPlanId
INNER JOIN FundDBF f
on pd.FUND_ID = f.FUND_ID
WHERE
pd.Import = 1
AND NOT (
pd.FUND_ID IS NULL
OR
Len(pd.FUND_ID) = 0
OR
pd.FUND_ID NOT IN (
SELECT
PortfolioName
FROM
Statements..PlanPortfolio pp
Where
pp.PlanId = p.PlanId
)
)
) pm
on p.PlanId = pm.PlanId
 
I am trying to put the above table with f,AssetDesc in the PorfolioDescription field..
Any help will be appreciated..
Regards
Karen

View 17 Replies View Related

SQL Select Statement To Select The Last Ten Records Posted

Aug 6, 2007

SELECT Top 10    Name, Contact AS DCC, DateAdded AS DateTimeFROM         NameTaORDER BY DateAdded DESC
I'm trying to right a sql statement for a gridview, I want to see the last ten records added to the to the database.  As you know each day someone could add one or two records, how can I write it show the last 10 records entered.

View 2 Replies View Related

(Urgent) Update Statement Takes For Ever To Excecute

Dec 4, 2007

Hi, i am trying to Update some records in my table but the update statement is taking for ever ...this is my update Statements
 UPDATE
Statements..ParticipantFundBalances
SET
Act1 = ACT_ID1,
TotAct1 = TOT_ACT1,
Act2 = ACT_ID2,
TotAct2 = TOT_ACT2,
Act3 = ACT_ID3,
TotAct3 = TOT_ACT3,
Act4 = ACT_ID4,
TotAct4 = TOT_ACT4,
Act5 = ACT_ID5,
TotAct5 = TOT_ACT5,
Act6 = ACT_ID6,
TotAct6 = TOT_ACT6,
Act7 = ACT_ID7,
TotAct7 = TOT_ACT7,
Act8 = ACT_ID8,
TotAct8 = TOT_ACT8,
Act9 = ACT_ID9,
TotAct9 = TOT_ACT9,
Act10 = ACT_ID10,
TotAct10 = TOT_ACT10,
Act11 = ACT_ID11,
TotAct11 = TOT_ACT11,
Act12 = ACT_ID12,
TotAct12 = TOT_ACT12,
Act13 = ACT_ID13,
TotAct13 = TOT_ACT13,
Act14 = ACT_ID14,
TotAct14 = TOT_ACT14,
Act15 = ACT_ID15,
TotAct15 = TOT_ACT15,
Act16 = ACT_ID16,
TotAct16 = TOT_ACT16,
Act17 = ACT_ID17,
TotAct17 = TOT_ACT17,
Act18 = ACT_ID18,
TotAct18 = TOT_ACT18,
/*Act19 = ACT_ID19,
TotAct19 = TOT_ACT19,
Act20 = ACT_ID20,
TotAct20 = TOT_ACT20, */
OpeningUnits = UNIT_OP,
OPricePerUnit = PRICE_OP,
ClosingUnits = UNIT_CL,
CPricePerUnit = PRICE_CL,
AllocationPercent = ALLOC_PER1

FROM
Statements..ParticipantFundBalances pfb
JOIN (
Select
cp.PlanId,
p.ParticipantId,
@PeriodId Period,
CASE WHEN a.FUND_ID = 'LOAN' Then 0 ELSEf.FundId END FundId,
a.ACT_ID1,
a.TOT_ACT1,
a.ACT_ID2,
a.TOT_ACT2,
a.ACT_ID3,
a.TOT_ACT3,
a.ACT_ID4,
a.TOT_ACT4,
a.ACT_ID5,
a.TOT_ACT5,
a.ACT_ID6,
a.TOT_ACT6,
a.ACT_ID7,
a.TOT_ACT7,
a.ACT_ID8,
a.TOT_ACT8,
a.ACT_ID9,
a.TOT_ACT9,
a.ACT_ID10,
a.TOT_ACT10,
a.ACT_ID11,
a.TOT_ACT11,
a.ACT_ID12,
a.TOT_ACT12,
a.ACT_ID13,
a.TOT_ACT13,
a.ACT_ID14,
a.TOT_ACT14,
a.ACT_ID15,
a.TOT_ACT15,
a.ACT_ID16,
a.TOT_ACT16,
a.ACT_ID17,
a.TOT_ACT17,
a.ACT_ID18,
a.TOT_ACT18,
/*a.ACT_ID19,
a.TOT_ACT19,
a.ACT_ID20,
a.TOT_ACT20, */
a.UNIT_OP,
a.PRICE_OP,
a.UNIT_CL,
a.PRICE_CL,
Cast(Rtrim(i.ALLOC_PER1) as decimal) as ALLOC_PER1
FROM
ASDBF a
-- Derive the unique PlanId from the Statements ClientPlan table
INNER JOIN Statements..ClientPlan cp
ON a.PLAN_NUM = cp.ClientPlanId
AND
cp.ClientId = @ClientId
-- Derive the unique ParticipantId from the Statements Participant table
INNER JOIN Statements..Participant p
ON a.PART_ID = p.PartId--Derive the unique FundID from the Statements Fund Table...Left Outer JOIN Statements..Fund f
ONa.FUND_ID = f.Cusip
OR
a.FUND_ID = f.Ticker
OR
a.FUND_ID = f.ClientFundId
-- get the allocation percent from the INVSRC
LEFT Outer JOIN INVSRC i
ONa.FUND_ID = i.INV_ID
AND
a.PLAN_NUM = i.Plan_Number
AND
a.PART_ID = i.PART_ID

WHERE
a.Import = 1
)a
ON pfb.PlanId = a.PlanId
AND
pfb.ParticipantId = a.ParticipantId
AND
pfb.PeriodId = PeriodId
AND
pfb.FundId = a.FundId
 
 
While i insert data in my table i am checking if there are any loans in the ASDBF table and if there i am inserting a 0 in the particular
i am trying to up date the with in 3 different plans in the same table..
 
any help will be appreciated.
Regards
Karen

View 1 Replies View Related

Code Skipping The Alter Statement!! URGENT!!

May 14, 2002

I have coded an alter statement for adding a column to a temp table inside an sp,but it skips the alter statement while executing the sp! This happens even if I run the same code on query analyzer too. If I use 'GO' statement before the alter command,then it works fine on Query Analyzer.But, I can't use 'GO' in an sp. I am using the sa account. Any ideas on how to fix this??
Thanks.
Di.

View 1 Replies View Related

Using Select Statement Result In If Statement Please Help

Jul 11, 2007

Hello
How can i say this I would like my if statement to say:  if what the client types in Form1.Cust is = to the Select Statement which should be running off form1.Cust then show the Cust otherwise INVALID CUSTOMER NUMBER .here is my if statement.
<% If Request.Form("Form1.Cust") = Request.QueryString("RsCustNo") Then%> <%=Request.Params("Cust") %> <% Else %> <p>INVALID CUSTOMER NUMBER</p> <% End If%>
<asp:SqlDataSource ID="SqlDataSource1" runat="server" ConnectionString="<%$ ConnectionStrings:RsCustNo %>"
ProviderName="<%$ ConnectionStrings:RsCustNo.ProviderName %>" SelectCommand="SELECT [CU_CUST_NUM] FROM [CUSTOMER] WHERE ([CU_CUST_NUM] = ?)">
<SelectParameters>
<asp:FormParameter FormField="Cust" Name="CU_CUST_NUM" Type="String" />
</SelectParameters>
</asp:SqlDataSource>any help would be appreciated

View 2 Replies View Related

If STATEMENT Within Select Statement Syntax

May 15, 2008

Hi,

I am a newbie to this site and hope someone can help....

I have a select statement which I would like to create an extra column and put an if statement in it.... Current syntax is:

if(TL_flag= '1', "yes") as [Trial Leave]

it is coming up with an error.... I can use Select case but I should not need to as this should work?

Any ideas?

View 2 Replies View Related

Challenging Query...need Help

Apr 18, 2008

Hi,I need help to generate following query....------------------------------------------------------------------------------------------------------------- Tables and their columns:Table name: Employee Columns for Employee Table : (1) EmpID (2) EmpName (3) EcatID (4) ProjectIDSecond Table Name: EmpskillColumns for Empskill Table: (1) EmpID (2) SelfRating (3) EvalRatingInformation: (1) If EcatID = 1 means he is Project Manager [if not then he is a software Engineer]  (2) Both Project Manager and his subordinates have the same ProjectID------------------------------------------------------------------------------------------------------------- Result Needed:-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- PM Name          Software Enggs Nme under that PM         No of Self Rated Projects (for SEs)        No of Evaluator rated Projects (for SEs)  --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------                                    Rajesh                                                      10                                                                        8 Suguna                         Mahesh                                                      5                                                                        5                                    Roopesh                                                     3                                                                        3--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------In Short: List the Project Mangers name, in the next column list their subordinates (for one PM there are many sub ords), in the next column list the no of self rated projects of the sub ordinates, in the last column, list the No fo evaluator rated projects  Can Some One Help me ??Thanks in AdvanceHave a nice day 

View 20 Replies View Related

T-SQL Challenging Problem

Jun 14, 2005

  I am a bit into this one and it is kind of bugging me as i have not figured it out yet after 1 hour.  I have a web task in a Sql Server 2K that generates ASP code and ftps it to a remote location. This is nothing fancy: selects a few fields from a few tables and creates an HTML page into a file with a *.asp extension. It is much like a report that gets ship from the intranet to the Internet side of our business. You can do something similar by using the Tools>>Wizards>>Management>>Web Assistant Wizard... inside Enterprise Manager.   The page looks fine but the problem (my) is that the rows all have the same color - white the default. I am using a template [*.tpl] and the alternating color for the rows <tr> has to come from the data in the query.  Now what I would like to do is something like this to get alternating colors in my table rows:       declare @bgcolor nvarchar(12)       set @bgcolor = 'white'       select                              @bgcolor =                CASE @bgcolor                  WHEN 'white' THEN 'gray'                  WHEN 'gray' THEN 'white'                   ELSE 'white'               END,               , field1               , field2               , field3       from table1 inner join table2....       where ....  And, maybe get results like these:    'white', 'field1res', 2, 3    'gray', 'field1res, 3, 3    'white', ....etc.  The above DOES NOT WORK. Maybe because T-SQL is a set based language trying to do something like this is not appropriate - aka procedural. It does, however, still bugs the hell out of me. :)  Maybe I should investigate using Reporting Services to handle this requirement.   If anyone has any suggestions, please let me know.

View 6 Replies View Related

Challenging Trigger

Apr 15, 2005

Dear all, i have a challenging problem in writing a trigger here,,

here is the database script

-----------------------SCRIPT------------------------
if exists (select * from dbo.sysobjects where id = object_id(N'[dbo].[Categories]') and OBJECTPROPERTY(id, N'IsUserTable') = 1)
drop table [dbo].[Categories]
GO

if exists (select * from dbo.sysobjects where id = object_id(N'[dbo].[Categories_Properties]') and OBJECTPROPERTY(id, N'IsUserTable') = 1)
drop table [dbo].[Categories_Properties]
GO

if exists (select * from dbo.sysobjects where id = object_id(N'[dbo].[Properties]') and OBJECTPROPERTY(id, N'IsUserTable') = 1)
drop table [dbo].[Properties]
GO

CREATE TABLE [dbo].[Categories] (
[CategoryID] [int] IDENTITY (1, 1) NOT NULL ,
[CategoryName] [varchar] (50) COLLATE SQL_Latin1_General_CP1_CI_AS NOT NULL ,
[ParentID] [int] NULL ,
[CategoryDescription] [text] COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,
[MainCategory] [bit] NOT NULL ,
[HavePhoto] [bit] NOT NULL ,
[MaxPhotos] [int] NULL
) ON [PRIMARY] TEXTIMAGE_ON [PRIMARY]
GO

CREATE TABLE [dbo].[Categories_Properties] (
[Categories_PropertiesID] [int] IDENTITY (1, 1) NOT NULL ,
[CategoryID] [int] NOT NULL ,
[PropertyID] [int] NOT NULL
) ON [PRIMARY]
GO

CREATE TABLE [dbo].[Properties] (
[PropertyID] [int] IDENTITY (1, 1) NOT NULL ,
[PropertyName] [varchar] (50) COLLATE SQL_Latin1_General_CP1_CI_AS NOT NULL
) ON [PRIMARY]
GO
------------------------END SCRIPT--------------------------

Categories and Categories_Properties are joined by CategoryID
Properties and Categories_Properties are joined by PropertyID

there is a relation between the table Categories and itself, the PrimaryKey is CategoryID, the ForiegnKey is ParentID

the problem is i need a trigger to fire when adding a record in Categories_Properties to add this property to all the children for this Category, for eexample if the categories tree

Autos >> Cars >> FIAT

when adding the Property BRAND to to Autos, this Property had to be inserted to Cars and FIAT too, i wrote some trigger but it adds this property to just the direct children, just to cars,
How to update it to include all the children in all levels till the leaf ones??

here is what i wrote
-----------------------Trigger-------------------------
CREATE TRIGGER [inherete_property] ON [dbo].[Categories_Properties]
FOR INSERT
AS
declare @CatID integer,@PropID integer
--set @CatID=select CategoryID from inserted
set @PropID=(select top 1(PropertyID) from inserted)
DECLARE cat_cursor CURSOR FOR
select CategoryID from Categories where ParentID in (select CategoryID from inserted)
open cat_cursor
fetch next from cat_cursor
into @CatID
WHILE @@FETCH_STATUS = 0
BEGIN
insert into categories_Properties(CategoryID,PropertyID) values (@CatID,@PropID)

FETCH NEXT FROM cat_cursor
INTO @CatID
END
CLOSE cat_cursor
DEALLOCATE cat_cursor
-----------------------End Trigger---------------------

thank you all

View 1 Replies View Related

Challenging : VB-SQL Connectivity

Mar 12, 1999

This problem occurs in a Visual Basic 5 application which accesses the SQL Server 6.5 database through Jet Engine(DAO).

If a user starts a transaction and then his application terminates abnormally (before rolling back or committing), say due to power failure or if the user kills the application with Ctrl+Alt+Delete, then the transaction started by him is not terminated (rolled back) by SQL Server. Even the process cannot be killed using the "Kill" command and the user keeps holding all the locks that he has already acquired. Also nobody can use Enterprise Manager. This happens when you have lock on more than 8 tables including tables in tempdb. The only way to solve this problem is to restart the server which is never expected in a multiuser system.

One can know the threadID of the process that needs to be killed using "Sysprocesses" system table. Is it possible to kill the thread in Windows NT?

Is there any setting due to which SQL SERVER will automatically kill a process or rollback a transaction started by a disconnected client ?

Is it possible that a process or transaction will have to release lock after the specified time ?

Is there any other way to tackle this problem?

-Gunvant Patil
gunvantp@mail.usa.com

View 2 Replies View Related

A Challenging Question

Feb 19, 2006

How does one figure out, I mean compare the results after some changes have been done to the SQL Server, I mean the method in which the comparision is done, lets say I have a query I ran it it gave me the results in 40 seconds , I ran it again this time it took 30 seconds, then I again ran it it took 35 seconds, I then created an index , this time the query ran in 30 seconds ... how does one compare such things , I mean i need to give stats as too what kind of performace has takern place ... please helpo , I need to knw as a DBa how would you convince your maanger that becasue of some changes the performance has improved, cause when you ask the users they say its ok , we dont see the differnece & stuff , please help.

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved