HI,
How can I programmatically change the properties of Send Mail task using Script Task. I want to change the From, To and Attachment parameters of the Send Mail task.
If the Script Task can't do it, Is there any alternative to do?
Thanks
A common issue that I run across with clients is they want only want to process a file if it's finished transmitting to the server. This SQL Server 2005 task reads the properties of a file and writes the values to a series of variables. For example, you can use this task to determine if the file is in use (still be uploaded or written to) and then conditionally run the Data Flow task to load the file if it's not being used. You can also use it to determine when the file was created in order to determine if it must be archived.
http://www.pragmaticworks.com/filepropertiestask.htm
Hi
I'm running SQL Server 2005 Express SP1 on a Danish PC, and I need to have the server language set to Danish.
However, when I want to change the language in server properties (the current language is English (US) using Management Studio Express, I can't - all of the properties on the General page are greyed out.
I know that the SQL Server Express SP1 download is available in several languages (Danish not being one of them) - does that mean that I can't get my SQL Server Express SP1 installation to "speak" Danish at all?
Please help - it's driving me up the wall.
How to change the Security Properties of a Linked Server.
In tsql, I need to setup a linked server and want to set the Properties -> Security -> For a login not defined in the list above, connections will: -> Not be made But I cannot figure out how to set it to Not be made. I manually set it in the GUI, and the scripted the linked server and when I ran the script to create it was set to Be made using the login's current security context. The create script did not even set it correctly.
I have looked around and all that I have found is a column in sys.linked_logins, uses_self_credential that looks promising. But I cannot change the system catalog.
how i can set the "For a login not defined in the list above" security property in tsql?
I installed sql server 2012 on windows2012R2 when I creat a new filegroup and try to change like a default give me this message error:
cannot change the properties of empty filegroup the filegroup must contain at least one file (Microsoft sql server, error:5050)
Hi,
I recently came across a DTS made by an experienced DBA and was impressed by the use of Dynamic Properties DTS Task used. As I understood the DTS was generic and if I'm not mistaken, can be easily transferred to another server/machine on an AS IS basis and without having to change any of the properties (server name, login, password etc.) for the source or destination server.
This seems to be a really neat feature.
I tried to put this to use but am having problems regarding how to proceed... Unfortunately I have not been able to find any article either which addresses this particular request and takes a novice step by step so that this feature can be used.
Will appreciate any help.
Thanks
I store files in db in sql server 2008 by filestream. But when a column would be added to table which have filestream, properties of table would be changed. by every things change on table, retrieve files will faced to error. but store process work probably.
and filestream filegroup at following address will be empty. why?
Right click on table --> properties --> storage --> filestream filegroup
I have connected to the SQL Server 2005 instance usign the SQL Server Management Studio; I have changed the default locations for the database and log files. I have also rebooted the machine. When I look in the SQL Server Configuration Manager in the properties for the SQL Server (MSSQLSERVER) I see that the data path is still set to the old value and this field is read-only. How can this can changed without going through the registry?
View 10 Replies View RelatedHi,
DTS now has a dynamic properties task in sql 2000 which at a first glance is pretty cool. However i do not know if it would sort out a particular issue I have.
I need to have a generic DTS package that pulls data from different locations based on the project selected by a user. The source is a btrieve database
The name of the tables change with the project, so for example the F24 project would have its source table named F24TACT and the IFO source would have its source table named IFOTACT.
I need to be able to dynamically retrieve the table name from a local SQL table and assign this name to the data pump for the data extraction..
I don' t know if this is achievable in DTS. I can retrieve the value into a look up variable but how can i set it at runtime ?
thanks
Tony
Hey all,
I have a stored procedure, which need one variable as parameter. I am trying to call this stored procedure from my DTS Task and my parameter is defined as the Global Variable in DTS. here is the SP call within my DTS Task
declare @id int
select @id = DTSGlobalVariables('ClientId' ).value
exec sp_Update_DayPart @ClientId= @id
it gives me an error that DTSGlobalVariables function not defined. In this case how can i pass the value of Client Id which is my global variable to my SP.
Thanks in Advance
Hello,I am building a packge where an FTP task needs to pull down a singlefileevery day from a specific location. The location will only have theone file.The file name will be different every day. A sample of one of the filenameslooks like this:CDNSC.CDNSC.SC00015.04012007The file names will be different every day, as the last eight digitsrepresent the date of the data in the file. The source files will belocatedin a subdirectory called 'outgoing'.My first approach to this has been to use a Dyamic Properties Task tosetthe SourceFileName of the FTP Task. I tried using a sting GlobalVariableexpressed as *.*.*.* thinking a wildcard would work, but it didn't.What approaches can I take so that the Source Filename in the FTP taskwilldymanically update each day to get the one file?Thank you for your help!cdun2
View 1 Replies View RelatedHi everyone,
I€™d like to read the SqlStatement property for a Sql Task from a Script Task (previously Sql Task is executed) in execution.
Keeping on mind that such SqlStatement receives an input parameter.
Is it possible? I think so but how do I such thing?
Let me know if you need further details.
Thanks a lot for your time and thoughts,
Hi ,
What is the equivalent of DTS Dynamic Properties task into SSIS ?
How do I convert this task to SSIS ?
Thanks,
Vikas
Hi All,
I am working on a SSIS package which is using a Script task, now I have all the connection properties set up in the .NET script using connection strings, what do I need to do if I have to set this up using a config file or something else which is more secure (I dont want to leave the connection information in the script). Please Advice.
Thanks
I have a component who's OnPreExecute event handler contains a Script Task. I would like to use this Script Task to access the component's properties. Can anyone provide script examples for doing this if this is possible?
View 6 Replies View RelatedI have a Dynamic propeties task in dts 2000 that process/executes a global variable.
The global variable basically executes a bat file.
How do i set this up in ssis. The migration failed to properly convert this task.
Please help.
Thank you.
Hello All Experts,
I have created one custom task with PropertyGrid Control and two button on it. I have everything under one class library project.
Problem I am facing is when i load task and clik on Edit I can not see those properties into that GUI and even functionlity of those two buttons (OK and Cancel) not working but I am able to see those properties in default property window.
If I create this GUI as a seperate window application then I am able to see those properties in GUI and buttons also working but in SSIS I am not able to load the task.
After reading on internet about SSIS they suggest to create everything under one project which I did.
Basically I am trying to populate connection managers like Source Connection and Destination Connection when I load this task and there are much more backend functionlity but at first step i m stuck and not able to see those properties in GUI.
Please help and give your input on it. I was following "Increment Task" example given by MSDN.
If you need more info let me know.
Thanks
I am trying to read in a flat file, transform the fields and store into a destination database.
In DTS, this works using Transform Data Task Properties. I define the columns and then have a VB script on the Transformations tab that changes any bad data.
Is there a way to do this in SSIS that I can define the column transformations and re-use my VB scripts?
Linda
I would like to store the file properties like (title, created by , created time, modified time) and load in to a audit table along with file name. I know how to design this process inside a foreach lookup with script task and execute sql task.
I'm trying to achieve this by editing my existing code which captures the most recent file based on its file properties.Â
public void Main()
{
// TODO: Add your code here
var directory = new DirectoryInfo(Dts.Variables["User::Csv_Source"].Value.ToString());
FileInfo[] files = directory.GetFiles("*.csv");
DateTime lastModified = DateTime.MinValue;
[Code] ....
All of the subscription emails that go out has a "From" display name of "POP3", so when the receipients receive the email, they see "POP3" in the "From" field. I would like to change this so ill-informed users don't delete the emails thinking they're junk/virus email.
Of course if the email software being used by the receipients doesn't support displaying a "From" name, then only the actual email will show and, in that case, it will be perfectly fine.
I'm trying to account for the less-than-educated end-users with minimal literacy in computers.
Does anyone know how to change this? Thanks!
UPDATE.
I am now checking with our IT if the SMTP corporate server has the correct relay authorisation for the new server. I may have overlooked this issue.
Hello,
Om my previous report server, I had not set amy DefaulthostName nor PermittedHost.
This allowed us to create subscriptions that get sent to our business partners with a long ever changing lists of email addresses and domains.
All server are build 2175, they ahve the same rsreportserver.config setting for the email portion. Problem is that on 2 of the servers, the email with a domain other than our internal domain do not get sent with error "The email address of one or more recipients is not valid". It works on the third server.
I tested our SMPT server from another application and it does send emails to external domains so the problem is really on the server side.
It is vey important because subscriptions are managed by a few business analysts, they spend a lot of time creating lot of subscriptions and the domains change often.
I tried on the dev server to define cox.net as Permitted host and send myself a report to my private email, it also returned the error.
Any idea as where to look at? is ther a specific CDO setting to allow relay?
Thanks,
Philippe
<SendEmailToUserAlias>False</SendEmailToUserAlias>
<DefaultHostName></DefaultHostName>
<PermittedHosts></PermittedHosts>
ReportingServicesService!emailextension!4!01/27/2007-11:47:12:: Error sending mail, CDO error -2147220977, will not resend
ReportingServicesService!emailextension!4!01/27/2007-11:47:12:: Error sending email. System.Runtime.InteropServices.COMException (0x8004020F): The server rejected one or more recipient addresses. The server response was: 550 5.7.1 <me@cox.net>... Relaying denied. IP name lookup failed [10.100.15.87]
at ReportingServicesCDOInterop.MessageClass.Send()
at Microsoft.ReportingServices.EmailDeliveryProvider.EmailProvider.Deliver(Notification notification)
I'm programmatically loading a package that was created with VS 2005. The last task in the package is a Send Mail Task. It has two properties, FileAttachments and ToLine, which are set to expressions whose values come directly from package variables. The package runs in debug and non-debug (under VS) correctly.
View 3 Replies View RelatedIf, in an SSIS package, you put an instance of an 'Execute SQL Task' task in the Control Flow, in the Properties window, you can see the properties of the task, for example CodePage.
If you double click on the task, the Execute SQL Task Editor appears, with several of the properties which are also in the Properties window, including CodePage.
If, in the Editor, you update the value of CodePage, then click OK, the value of CodePage in the Properties window is updated immediately.
I have written a custom SSIS task, which also has the same properties in the Properties window and in the Editor. The Editor also has an OK button. When OK is clicked, the values of the task properties are updated. An example property is FolderToArchive. If I open the Editor, change the value of FolderToArchive and click the OK button, the value of FolderToArchive in the Properties window is NOT immediately updated.
If, however, I select the FolderToArchive field in the Propertiesd window, it is then updated with the value I entered in the Editor.
How do I get my task to update the values in the Properties window, after changing a value in the Editor, when I click the OK button?
I would have thought I would need something like, in pseudo-code,
   Task.Parent.PropertiesWindow.Refresh
   where task is of type Microsoft.SqlServer.Dts.Runtime.Task and Task.Parent is of type Microsoft.SqlServer.Dts.Runtime.Package.
I implemented a custom source adaptor. I want to be able to associate custom properties with each of the output columns. I want them to be passed downsteam. The idea is to be able to retrieve these information in a downstream custom transformations of ours and process the various columns accordingly. How do I go about doing this?I noticed that the IDTSCustomProperty90 seems to have a local scope only.
View 1 Replies View RelatedI just moved our SSRS server from one machine to another. It was sending our report emails from a service account. So when my end users get the emailed report it was from a service account (reports@blah.com) .Â
Now that I moved the DB to another server - the reports get emailed successfully - but they are being sent from my email address!Â
I have checked the rsreportserver config file. I also checked in the report server smtp setup and they both show the service account. I even checked the subscription owners and accounts.
SSRS is using my account, but I can't find where it's getting it from. Where else can I look?
In my DTS package I tried to make an email task and it works if I execute it manualy, but if I schedule it I get the following error:
DTSRun: Executing... DTSRun OnStart: DTSStep_DTSExecuteSQLTask_16 DTSRun OnFinish: DTSStep_DTSExecuteSQLTask_16 DTSRun OnStart: DTSStep_DTSActiveScriptTask_1 DTSRun OnFinish: DTSStep_DTSActiveScriptTask_1 DTSRun OnStart: DTSStep_DTSDataPumpTask_2 DTSRun OnProgress: DTSStep_DTSDataPumpTask_2; 8 Rows have been transformed or copied.; PercentComplete = 0; ProgressCount = 8 DTSRun OnFinish: DTSStep_DTSDataPumpTask_2 DTSRun OnStart: DTSStep_DTSSendMailTask_1 DTSRun OnError: DTSStep_DTSSendMailTask_1, Error = -2147220352 (80040480) Error string: Logon failed: MapiLogonEx Failed due to MAPI error 273: MAPI Logon failed. Error source: Microsoft Data Transformation Services (DTS) Package Help file: sqldts80.hlp Help context: 1100 Error Detail Records: Error: -2147220352 (80040480); Provider Error: 0 (0) Error string: Logon failed: MapiLogonEx Failed due to MAPI error 273: MAPI Logon failed. Erro... Process Exit Code 1. The step failed.
What could it be?
Hello,
I have data (using Full Result Set) and would like to email values.
Query output from SQL Task:
ID Client
1 ABC
2 Acme
3 Holtz
Goal email output (inside Script Task):
The following records found today:
ID Client
1 ABC
2 Acme
3 Holtz
Thank you in advance.
Note: I know how the email works, it's just passing the resultset I need help on.
I have a pretty simple process that copies some files from an AS400 to a directory on the same server where my sql 2005 instance lives. I then use an email task to send these files to a client.
However, the email task does not work. I get the following message:
[Send Mail Task] Error: Either the file "BYNSOSR1;BYNSOSR2;BYNSOSR3;BYNSOSR4;BYNSOSR5;BYNSOSR6;BYNSOSR7" does not exist or you do not have permissions to access the file.
Well, the files definitely exist where they are supposed to be so I guess it's a permissions error. However, I have no clue which user would need permissions on that directory. As a test, I gave everyone read permissions and still got this error.
Any suggestions about which user I need to allow read access to the directory where these files exist?
Thanks in advance for any info.
I am generating the text file on run time using flat file destination. The text file is generated on the location C: SSIS or D:SSIS based on the location specified in the configuration file.
The text file contains the non matching rows during lookup transform task.
I want to send this dynamically generated text file using the send email task.
But while doing this, I receive an error during package validation:
Package validation error:
Error at send email task [ send email task ] : either the file C:SSISErroroutput.txt does not exists or you do not have permission to access the file.
Error at send email task ; There were error during task validation.
Please suggest as I need to generate the text file only in case of lookup failure.
HI,
I need to open a File through File connection manager and want to assign these file properties to SSIS precreated varibale or Newly created varibale. I want to show file properties in Propertygrid. Properties grid will conatin File Propeties Column and SSIS varibale Combobox column. The combo box will contain New variable field. When user select New Variable field, then a new SSIS varibale window will open and we can able create New variable and that Newly created variable should add to that property comboBox.
For Instance if we create a new varibale Name "Creationdate" by clicking on New Varible in ComboBox, then that CreationDate variable should add to Property ComboBox in PropertyGrid. After adding when we select that variable Name "Creationdate" then that selected file Creation date should assign to SSIS varibale "Creationdate" field.
Any Comments or sample will help me.
Nitin
today MDS can send emails only when there is validation failures.I need to send an email when a value change to some users, but I dont want to make the record has failed. its not a validation.so I'm looking for a custom workflow doing this.is there some libraries of workflow available?
View 2 Replies View RelatedWondering if it is by design that when I select messagesource to be variable it only shows user variables or if there is some setting I'm missing to expose the system variables?
This email task is on the eventhandler tab.
Thanks
i use email task and it dosent send an email at all....this task causes an error..
If i need to set up email for the package if the package fails...
or how should i set in the sql server agent...iknow there is an option there but i dont know how to..
Please let me know...