we have one 'application'-user in sysusers that makes the connect to SqlServer for all users, for example:
Application Login-User: Thomas
DB-Connect-User: AppUser
With this solution, in Activity-Monitor or with sp_who I don't know, what is the real name of the connected user.
Any possibility to change the login-information after the connect, so that i can see 'Thomas' in Activity-Monitor or with sp_who?
The activity monitor is not showing entries for hosts which connect via sql logins (odbc), is this normal? Where can I find a list of protocols in which the hostname/ip can be picked up. We're on SQL 2005 SP1/Build 2153
If I'm on a remote machine, meaning a computer not in the WSFC cluster, and I open SSMS 2014, point it to a SQL Instance, and open activity monitor:
1. I get all the panes and charts except % Processor Time.
2. Then, if I authenticate to the cluster's domain by mapping a drive with valid domain credentials, I'm free to put performance counters in the Perfmon - - - but SQL Activity Monitor shuts down with“The Activity Monitor is unable to execute queries against server SQL-V01INSTANCE1..Activity monitor for this instance will be placed into a paused state.Use the context menu in the overview pane to resume the activity monitor.
Additional information: Access is denied. (Exception from HRESULT: 0x80070005 (E_ACCESSDENIED))(Mscorlib)”
3. Of course, the Activity monitor can't be resumed via the context menu. Removing counters and closing the perfmon do not work. I dropped the mapped drive and rebooted the machine. That brought back 95% of the information in the Activity monitor.
4. Further experimentation showed that any mapping of drive shares present on the SQL Server to the computer running SSMS cut off functionality of the 'overview' pane in the remote machine's SQL Activity monitor -- the monitor that had been trying to watch the server offering the shares.
Hi experts, I just want to know how can i kill all the processes of a database if the database have more than 100 connections.This is for the purpose of restoring a database.
I have a SSIS which copies data from a table to a flat file. The connection string of this file is variable and the file is reused if not exists and is created if exists.
When I run the SSIS manually from my microsoft visual studio it works properly. However, when I run this SSIS from the Job Activity Monitor, I get the following error:
Message Executed as user: REDCAMadminsql2k5. Microsoft (R) SQL Server Execute Package Utility Version 9.00.3042.00 for 64-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 8:41:10 AM Error: 2007-09-10 08:48:04.99 Code: 0xC020200E Source: Crear Historico Historico [1] Description: Cannot open the datafile "\srvnfileHISTORICOSCAJEROSOFI3210C01OFI3210C01_2007-7X.txt". End Error Error: 2007-09-10 08:48:04.99 Code: 0xC004701A Source: Crear Historico DTS.Pipeline Description: component "Historico" (1) failed the pre-execute phase and returned error code 0xC020200E. End Error DTExec: The package execution returned DTSER_FAILURE (1). Started: 8:41:10 AM Finished: 8:48:53 AM Elapsed: 462.234 seconds. The package execution failed. The step failed.
I want to analyze server (SQL 2005) activity at a specific time in the past. Unfortunately, there doesn't seem to be a log file reflecting the information in Activity Monitor. Knowing that the sysprocesses and syslocks tables feed Activity Monitor, I thought about doing a log analysis on the master transaction log, but I'm not sure that's possible.
Is there a (different) way to achieve this?
Or is there a better approach to identifying processes that cause performance bottleneck/deadlocks?
I've been using the Job Activity Monitor quite a lot and last night I installed Service Pack 1 for SQL Server 2005. I've noticed now that I only have a "Start Job at Step" option when I right-click a job. Whereas I used to have just Start Job or both Start Job and Start Job at Step options.
The problem is that Starting a Job at a Step, produces a modal dialog box which prevents further access to Job Activity Monitor until the job is complete.
I'm hoping that someone has experienced this problem before and knows how to get round it.
The problem we are having is that we have a job that is scheduled to run at 4:00 am each morning, for the past 6 weeks it has done this with no problem. However, this morning it failed. we know it failed because it didn't produce the results it was supposed to. However the monitor said that the job had completed successfully. On examining the history of the job we found that the job was still running!!! When we tried to stop the job by right clicking and selecting the appropriate action. The action available to us was to start the job.
After arguing for a bit we decided to try and run the job again. We did this and found that the job running in the history screen terminated with an error and than ran and completed successfully.
Confused? So are we any ideas or solutions gratefully received
If you are in SQL Server Management console, go to Job Activity Monitor, there is an option 'View Refresh Settings'. You have to enable/check the Auto Refresh option here every time. Is it possible to keep this Auto Refresh enabled?
I have a SSIS package set up that will transfer a file from a location on the network drive and transfer it over FTP to another location.
When I manually run the package, the file is transfer with no errors. But when the job is automated (via Job Activity Monitor) the transfer fails?
I have set the ProtectionLevel of the package to "EncryptSensitiveWithUserKey" and also converted the package to a Development Model. The settings for the FTP is saved within the package.
What am I missing? below is the error message
Executed as user: UHBInfoSQLAgent. Microsoft (R) SQL Server Execute Package Utility Version 11.0.5058.0 for 32-bit Copyright (C) Microsoft Corporation. All rights reserved. Started: 08:43:02 Error: 2014-10-13 08:43:03.72 Code: 0xC001405F Source: ResearchWebsite
We have killed a job which is now in KILLEDROLL BACK state. Job activity monitor is not showing any running jobs but I can see the SPID of that job. When tried to kill again its giving the message ‘command completed successfully‘, not able to get the percentage or time for the roll back to complete.
Another DBA tried to create a snapshot and it was stuck and I believe it was because of this ROLLBACK as both were using same Database.
We have a Windows App and Web App that share business objects which points to a single database. When a Windows user logs in, an average of 50 processes are created in the first few seconds and never go away. The details window is blank and they all remain sleeping from that point on.
I have stepped through the code to see if there is anything odd going on but most of the processes are created when validating the number of parameters the stored procedure has or the length of the stored procedure name. This translates to 1000-1500 processes on average.
Is this normal? Will it hurt performance? Is there a way to remove them?
When I try to open Activity Monitor from SSMS I receive the message "Access is denied. (Exception from HRESULT: 0x80070005 (E_ACCESSDENIED)) (mscorlib)". - more details below.
I have a SQL Server 2012 Enterprise SP1 installed in an Active/Passive cluster configuration on Windows 2008 R2 Enterprise SP1. The problem happens using sa and a domain administrator.
------- more details ------- Access is denied. (Exception from HRESULT: 0x80070005 (E_ACCESSDENIED)) (mscorlib) at System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr errorInfo) at System.Management.ManagementScope.InitializeGuts(Object o) at System.Management.ManagementScope.Initialize()
Is there a way to permanently change the order of the columns in Job Activity Monitor?
I'd like to move Duration to the right of Step Name, but this only lasts so long as I have JAM open. Once I close it and re-open, JAM goes back to its default column order. Google gives me nothing but the temporary "drag and drop" method that I already know about.
Please forgive the simplicity of this question - I am not the dba type. When I connect to a server and look at my connection attributes in activity monitor, the user column shows the correct information for my domainusername. When I run a certain stored procedure in that connection, the domainusername changes to another person. We are not using execute as, setuser, or anything special to explicitly change the user. The stored procedure is in a schema that is owned by dbo (principal_id = 1 - I verified by checking sys.database_principals.)
Just recently I noticed something that I consider very strange on a SQL7.0 server with SP1.
In [Server -> Management -> Current Activity -> Process Info] I see a great number of rows(connections) around 70 or so that all have the same net_address value. However, the nt_loginame is different on each.
Q1: How can this be? Q2: Isn't the net_address really the MAC of the network card?
Also, on a test SQL7.0 server with SP1 where the connections are far less (around 15 or so), I noticed the same problem. Luckily, because the connection count is low I was able to go around to each machine where the nt_loginame was used to log on and found that the net_address shown in [Current Acivity] didn't match any of these machines. Why?
For SQL Server 2000 we have a user login mapped to msdb with database role membership of db_datareader and public checked. This seems to allow the developers to view the Management Activity monitor. For SQL Server 2005 the same mapping is in place but the developers cannot view the Management Activity monitor. Developers are NOT granted the sysadmin role, and should not have that role.
What permissions need to be set for SQL Server 2005 to allow users to view the Management Activity monitor? They should not be allowed to take actions on the activities.
Dear AllI have problem with my database server which running SQL server 2000.The server running very slow. The worst case, to save a record requiredmore than 20-30 seconds.Since this problem, I usually monitoring Process Info from EnterpriseManager (Management - Current Activity), and I found a misteriousprocess as follow :1. User: SystemAccessTo: MasterStatus: BackgroundCommon: Task ManagerWaiting: >438 Million2. User: SystemAccessTo: MasterStatus: BackgroundCommon: Task ManagerPhysical IO: > 510003. User: Administrator (Join domain)Database: MSDBStatus: SleepingCommon: Awaiting CommandApp: SQL Agent Alert EngineCPU Usage: > 16 MillionAnybody know about these condition? Does it normal?ThanksMichael
We have development and user acceptance (UA) servers. When I start a job on the development server, on the management studio, Start Jobs window and Job activity windows indicate "Executing" until the end of the job and finish with "success" or "failure"
But on the UA server, second after I start a job, Start Jobs window comes up with "success" or failure" and Job activity monitor says "idle" but Job continues to log without any error message and updates the tables. So these two windows are not reliable at all. I have to add that I have only job operator rights on the UA server.
SQL 6.5 had counters for monitoring SQL licenses. Where did Microsoft hide them in SQL 7.0? Or did they just disappear? If they are gone, is anyone doing anything to monitor the licenses with something like perfmon? User Connections doesn't help because the application takes several and not always the same number of user connections for one license.
How to find last login date/time for user DML acitivity on databases on Instance?
Is there any way we can find our the last login date/time for databases?
Note: 1. We can find if the SQL Trace is running and store.This is not good solution 2. Audit logins off/on is also not good solution. 3. Using DMV's also not good option, if reboot sql server instance then historical values can not see.
When I installed sql, I mistakenly made it so that only 1 connection is allowed at one time. How can I change this info. to make it so that more than 1 connection are allowed without re-install sql again? Thanks
The new feature of login encryption still tortured me and my company's fellow :(
We can't use the server's profile nor server's login audit functionality. The reason is.. they do not want any additional feature to the server even if it's just a small task.
So..
I know that self signed certi generated whenever the MSSQL server started. My question is..
1. Where is that self-signed certification. Is it loaded to memory or physical hard disk.
2. Is there any special 'store' for this self-signed certification? I tried to find this certi from all of my store using the certutil.exe but couldn't find this certi.
3. Is there any api that find and decrypt this login info?
I'm trying to use DTS to copy data from an Accounting system to a SQL table. A login is required by the proprietary ODBC driver to the database-which includes company, user name, password. Is there code that I can put in the DTS package to pass this to the database so it can run automatically?
I want to be able to see the last login for every user, even if it was before today in any user database combinedly listing all. Tried to query master..sysprocesses but the last_login or last_batch shows just for today. Can someone help with code or table query how to get this information. Auditors want to see when any user has last logged into any database. Any help is appreciated
