Change XML/XSD Source Location - Gives Lineage Errors!
Jun 26, 2007
Hi,
I have developed a SSIS package on my desktop and the package involves loading of XML data into a database. The XML does not have inline schema and I generated the XSD file from SSIS.
I used Derived Column and Data Conversion to load the data into the database.
Now, i want to migrate the package to a server. Now, when i change the path of the XML and XSD files, all the tasks show error such as
"Input column 'Last_Updated' (4433) has lineage id 3586 that was not previously used in data flow...."
Why is this so? I am using the same XML/XSD files after i moved to the server.
Please advice a fix for this?
Regards,
Vikram
View 6 Replies
ADVERTISEMENT
Aug 15, 2007
I am running an SSIS package and I keep getting this error when it gets to a the dataflow task. I have a bit of an idea of what it means, but I can't figure out how to fix it. IF anybody could explain this error and fixes for it that would be of immense help. Thank you.
Error: 0xC004701C at Load Server Security, DTS.Pipeline: input column "Server" (1434) has lineage ID 1421 that was not previously used in the Data Flow task.
Error: 0xC004706B at Load Server Security, DTS.Pipeline: "component "OLE DB Destination 1" (1420)" failed validation and returned validation status "VS_NEEDSNEWMETADATA".
Error: 0xC004700C at Load Server Security, DTS.Pipeline: One or more component failed validation.
Error: 0xC0024107 at Load Server Security: There were errors during task validation.
View 6 Replies
View Related
Jun 18, 2015
I have a got a package with source as sql table which has got 50 columns. We are using only 10 columns out of this. Recently one column name has changed and thus throws error invalid mapping. When I open the source to do the changes noticed that all the colums are prselected now and also the datatypes got changed to default ( I had changed the datatypes as per my requirement while i developed). So now I had to select required columns from source and redo the datatype changes in advanced editor.Is there any option which doesnt disturb this settings and we just need to correct the mapping alone.
View 4 Replies
View Related
Dec 14, 2000
How do I move the tempdb to a different drive? It can't be dropped and it is automatically put on the same drive as the master during installation. I have moved a transaction log to a different drive, but I can't change the tempdb location. Please help.
View 2 Replies
View Related
Nov 6, 2007
Hello,
How can i change the location of the Sql Agent errorlog file, sqlagent.out
When i choose Properties from the Sql Agent page, i can see the location and filename, but i am not able to change it.
Is there some starup parm? And how can i apply it?
Any help is appreciated.
Best regards,
hvdtol
View 6 Replies
View Related
Mar 21, 2007
What parameter should be changed where in order to send the logging to a separate directory.
THx
View 1 Replies
View Related
Jul 14, 2006
I want to be able to programmatically set the schema location for an XML source. I first thought it would be a simple task using expressions and variables but it doesn't appear to allow anything in the way of setting it at runtime. Is this possible?
View 4 Replies
View Related
Nov 8, 2007
Hi,
Is there a way to set the XSD programatically? I don't want to hard code an XSD filename/location.
Alternatively, is there a way to set the location in a relative path name (i.e. relative to the path of the package)? I did see a similar question here but that wasn't answered. I tried but I wasn't getting anywhere.
As far as I can see there is no way to set this with an Expression either.
Another alternative I thought of would be to set this with using the SSIS object model but I have no experience with this and I don't know if it can be done at run time. If it can be done I would appreciate a pointer to some further information on doing this.
Thanks,
Mark
View 4 Replies
View Related
Jul 19, 2007
Hello
The default location where db's are created is almost full.
Is there any way to change the default location where the .mdf and .ldf are created when I create a new db? I know I can do this when I create a new db and go select where I want it to be, but can I make it default to a different directory automatically so no human intervention is needed?
tia
r/P
View 1 Replies
View Related
Aug 8, 2006
In SQL2000, there's an option to change the location of the template folder. This allows me to create a customized set of templates on a network folder and have all the developers reference the centralized location. Can the same be done in SQL2005 and how would I go about doing so?
Thanks.
View 1 Replies
View Related
Nov 30, 2006
I have been trying to change the location of the SQL 2005 error log. It's logging to the default location at
C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLLOG
I want to move the log location to the E drive because it can get quite large. I already changed the setting in the SQL Server Error and Usage config tool, but this did not seem to make a difference.
View 5 Replies
View Related
Sep 26, 2007
I have a flat source file(.csv) which I am importing to SQL server. Now, if the source file is not available at the specified location, then the SSIS package should retry to execute n times( say 3 times) after certain time interval. The number of retries and the time interval should be configurable.
I have used Flat File connection manager for the source and OLEDB connection manager for the destination.
I am quite new to SSIS. Any help would be highly appreciated.
View 1 Replies
View Related
Aug 22, 2002
Is there a way to move my mdf and ldf files for the tempdb and the model databases? If yes, how? I tried ti detach but SQL Server will not let me.
View 1 Replies
View Related
Sep 26, 2006
hi,
our reporting services DB moved and I need to tell the report manager where to find it
isn't it in a config file somewhere, i can't find it?
do i have to reinstall?
View 5 Replies
View Related
Dec 7, 2007
If I can get around taking a few databases offline, I'd like to. I need to get logfiles on a lower-capacity drive.
Ideally, I wouldn't like to have multiple logfiles swimming around. But, I was thinking that if I created a second logfile, and then backed up the transaction log, I might be able to remove the first logfile?
The other thought I had, was creating a second logfile, and then turning off autogrow on the first log.
Maybe there is a better solution? Maybe neither of these will work?
Thoughts?
View 2 Replies
View Related
May 13, 2015
How to change the default snapshot folder (Merge Replication) location in SQL Server 2012 Standard Edition? Actually that field is grayed out.
View 3 Replies
View Related
Nov 21, 2007
I am using the "XML Source Adapter" in an SSIS package.
I notice that although you can specify the XML filename as an expression, the XSD appears to have to be a fixed file path.
This is a problem for me since the path for the XSD is different in my development than it will be in production (in production it's on drive E:, which I don't have).
I'd like to have the file location specified in the config file, but since I can't make it an expression how can I do that?
Also, since they don't have Connection Managers I can't switch DelayValidation on.
Thanks.
View 24 Replies
View Related
Jul 20, 2005
Is there a possibility to change the default instalation directory forthe logfiles for sql server 2000? I would like the default databasefiles to be placed on teh d: drive and the logfiles on the e: drive?Sjaak van Esdonk
View 2 Replies
View Related
Feb 24, 2007
I have a report that has a matrix. That matrix can have from 2 to 16 columns dependinging on the dataset result. Right now I am forced to place this matrix on the left side of the report and make a column layout pretty narrow. When dataset has more than 13 or so columns it looks OK, but when dataset has only two or three columns it looks weird with a matrix sitting in the left corner with two or three narrow columns and a lot of empty space to the right.
Is it possible programmatically change the width of the columns depending on their number in the dataset?
Is it possible to move the location of the matrix (horizontally) depending on the number of columns in the dataset?
Thank you,
Simon.
View 11 Replies
View Related
Nov 9, 2015
I added a secondary data file to TEMPdb yesterday and gave it a wrong location by mistake. If I try to change the location, then I am getting an error now. I think that is because TEMPdb is in use and that is why I cant change it's secondary file's location. Do I need to take TempDB offline and then change the secondary file's location??
View 3 Replies
View Related
Oct 10, 2015
I am working on SQL Server 2014 and I want to know, Is it possible to change the location of SQL log file and will it affect to the database if it is possible to change its location?
View 4 Replies
View Related
Oct 24, 2007
Hi All,
I created a SSIS package to extract data from a flat file source and load them into a table in a data base. After I created the package i checked it in to source control(perforce).
But the problem is once a month new flat source file comes and data should be updated.
Once the new flat file comes, is there anyway that SSIS package can identify the path of the flat file and execute the package automatically? In Flat file source only the data will be changed. Not location or data type or anything.
Can i use parameters to do that?
Thanks
View 6 Replies
View Related
Dec 2, 2013
is there a way to change SSMS 2012 default query save location?
Scenario:
1. Open SSMS
2. Create new query
3. Click Save
I see "DocumentsSQL Server Management Studio" folder, but I want to change it to be "d:". How do I do this?
I tried:
1. [URL]- in folder "DocumentsSQL Server Management StudioSettingsSQL Server Management Studio" there is a file NewSettings.vssettings, setting it to "d:" or "d:" didn't work.
2. Changing HKEY_CURRENT_USERSoftwareMicrosoftMicrosoft SQL Server100ToolsShell VisualStudioProjectsLocation didn't work too. There is no "Shell" under "110Tools"
Did I do something wrong, or is there another way?
View 6 Replies
View Related
Apr 25, 2007
Hi
Some of reports stopped running all of sudden showing this error message:
An error has occurred during report processing. (rsProcessingAborted)
The Report Server Windows service 'ReportServer' is not running. The service must be running to use Report Server. (rsReportServerServiceUnavailable)
However, other reports on the same reporting server are running with no problem.
Those reports not running were ok until yesterday, I didn't make any changes, and it stopped running today. How can it happen? Any idea anyone?
View 1 Replies
View Related
Nov 27, 2007
Hi,
I have an Excel spreasheet - the first column is text, the second numbers, the third a mix of the two. If I point An Excel Source at this in my data flow, it will import the first two columns without problem, but not the third: all cells containing text are being imported as nulls, but those containing numbers are imported just fine.
Even if the numbers are stored as text, they are converted into numbers at import and genuine text is still discarded. It's treated as if the entire column is numeric if there's just one numeric value in it.
I can get around this by creating a .csv or .txt file from the excel file, but that will add an extra layer of admin to this process and I'm tryuing to make it as seamless as possible
View 3 Replies
View Related
Oct 24, 2006
Very often during dev. I add processes that don't change the metadata of a data item (for example a new sort) yet the linieage id is changed. This causes lots of headaches down the pipe. If metadata of a data item is not changed in the pipe, why is the lineage id changed?
If lineage is not smart enough to figure out when some metadata was actually changed, should it be made smart enough? Or optional?
Ken
View 10 Replies
View Related
Nov 3, 2007
Say for example, that I have a fairly complicated record of a thingmeant for the US market. Then, a Canadian version is created based onthe US one with a few changes so I want to track the connection. It isfairly easy to make a ParentID field that would indicate the Canadianthing descended from the US thing.But, if I then make a British thing from the Canadian one (and I wantto do this because the Canadian one is a closer match to what theBritish one needs to be), it becomes more complicated... I can put theID of the Canadian one in the ParentId field of the British one. Butthen I need to run multiple queries to build the complete lineage backto the original US record.More so, if I want to allow n-number of levels to the relationshipsbetween these things, it becomes even more difficult.This type of issue has come up repeatedly in my work, so I assume itis not a new problem and that there may be a "best practice" forhandling it.Can anyone offer any advice, an answer, or point me toward a placewhere I may find the answer?Thanks in advance!
View 4 Replies
View Related
Apr 26, 2006
Hi,
is there any "robust" way to find out the name of a field in the pipeline by it's Lineage ID programatically? There is a sample code out there (on one of the blogs) but it seams not to be reliable...
The usecase is easy... What is the field name in an error output of that column that causes the error? We don't want to have hardcoded LineageIDs in the error handling so I think it's the best idea to go with field names... However we only get that LineageID...
Thanks,
View 1 Replies
View Related
Nov 17, 2015
I am working on a custom component to implement some rules based on the column name. I am looking for ways to identify the column name using lineage id. Is there anyway we can derive column name using the lineage id?
View 3 Replies
View Related
Dec 28, 2007
Warning: 0x80019002 at STAGING: The Execution method succeeded, but the number of errors raised (14) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
i got this error in my ssis package, where i'm trying to export flat file data into oledb destination,
can anyone help me to fix this issue!!!
What i've done?
1. Data Flow Task
a. po.txt flat file Source
b. Derived column
c. Oledb destination
a. pend.txt Flat file Source
b. Derived column
c. Oledb destination
a. invoice.txt Flat file Source
b. Derived column
c. Oledb destination
i did three flows in a single data flow task; among that one flow is running (po.txt flow) the rest are returned with Red Box filled error, and i capture the error and pasted there!!
the full error message is...... what i got in my output window is follows
i need some guidence to solve this issue, please let me know if you know about this stuff.
Information: 0x40016041 at STAGING: The package is attempting to configure from the XML file "staging.dtsConfig".
Warning: 0x80012014 at STAGING: The configuration file "staging.dtsConfig" cannot be found. Check the directory and file name.
Warning: 0x80012059 at STAGING: Failed to load at least one of the configuration entries for the package. Check configurations entries and previous warnings to see descriptions of which configuration failed.
SSIS package "STAGING.dtsx" starting.
Information: 0x4004300A at Staging Table Loading Data Flow Task, DTS.Pipeline: Validation phase is beginning.
Warning: 0x80047076 at Staging Table Loading Data Flow Task, DTS.Pipeline: The output column "Description" (3223) on output "Flat File Source Output" (3161) and component "Invoice Raised Flat File Source" (3160) is not subsequently used in the Data Flow task. Removing this unused output column can increase Data Flow task performance.
Warning: 0x80047076 at Staging Table Loading Data Flow Task, DTS.Pipeline: The output column "Project Number" (3080) on output "Flat File Source Output" (3063) and component "Pending Files Flat File Source" (3062) is not subsequently used in the Data Flow task. Removing this unused output column can increase Data Flow task performance.
Information: 0x4004300A at Staging Table Loading Data Flow Task, DTS.Pipeline: Validation phase is beginning.
Warning: 0x80047076 at Staging Table Loading Data Flow Task, DTS.Pipeline: The output column "Description" (3223) on output "Flat File Source Output" (3161) and component "Invoice Raised Flat File Source" (3160) is not subsequently used in the Data Flow task. Removing this unused output column can increase Data Flow task performance.
Warning: 0x80047076 at Staging Table Loading Data Flow Task, DTS.Pipeline: The output column "Project Number" (3080) on output "Flat File Source Output" (3063) and component "Pending Files Flat File Source" (3062) is not subsequently used in the Data Flow task. Removing this unused output column can increase Data Flow task performance.
Information: 0x40043006 at Staging Table Loading Data Flow Task, DTS.Pipeline: Prepare for Execute phase is beginning.
Information: 0x40043007 at Staging Table Loading Data Flow Task, DTS.Pipeline: Pre-Execute phase is beginning.
Information: 0x402090DC at Staging Table Loading Data Flow Task, PO Pending Flat File Source [2344]: The processing of file "C:Documents and Settingse402076Desktopitss flat filespo_pending.txt" has started.
Information: 0x402090DC at Staging Table Loading Data Flow Task, Pending Files Flat File Source [3062]: The processing of file "C:Documents and Settingse402076Desktopitss flat filespending bills.txt" has started.
Information: 0x402090DC at Staging Table Loading Data Flow Task, Invoice Raised Flat File Source [3160]: The processing of file "C:Documents and Settingse402076Desktopitss flat filesinvoices_raised.txt" has started.
Information: 0x4004300C at Staging Table Loading Data Flow Task, DTS.Pipeline: Execute phase is beginning.
Error: 0xC02020A1 at Staging Table Loading Data Flow Task, Invoice Raised Flat File Source [3160]: Data conversion failed. The data conversion for column "Description" returned status value 4 and status text "Text was truncated or one or more characters had no match in the target code page.".
Error: 0xC02020A1 at Staging Table Loading Data Flow Task, Pending Files Flat File Source [3062]: Data conversion failed. The data conversion for column "Event Description" returned status value 4 and status text "Text was truncated or one or more characters had no match in the target code page.".
Information: 0x402090DE at Staging Table Loading Data Flow Task, PO Pending Flat File Source [2344]: The total number of data rows processed for file "C:Documents and Settingse402076Desktopitss flat filespo_pending.txt" is 76.
Error: 0xC020902A at Staging Table Loading Data Flow Task, Pending Files Flat File Source [3062]: The "output column "Event Description" (3095)" failed because truncation occurred, and the truncation row disposition on "output column "Event Description" (3095)" specifies failure on truncation. A truncation error occurred on the specified object of the specified component.
Error: 0xC020902A at Staging Table Loading Data Flow Task, Invoice Raised Flat File Source [3160]: The "output column "Description" (3223)" failed because truncation occurred, and the truncation row disposition on "output column "Description" (3223)" specifies failure on truncation. A truncation error occurred on the specified object of the specified component.
Error: 0xC0202092 at Staging Table Loading Data Flow Task, Pending Files Flat File Source [3062]: An error occurred while processing file "C:Documents and Settingse402076Desktopitss flat filespending bills.txt" on data row 10.
Error: 0xC0202092 at Staging Table Loading Data Flow Task, Invoice Raised Flat File Source [3160]: An error occurred while processing file "C:Documents and Settingse402076Desktopitss flat filesinvoices_raised.txt" on data row 5.
Error: 0xC0047038 at Staging Table Loading Data Flow Task, DTS.Pipeline: The PrimeOutput method on component "Pending Files Flat File Source" (3062) returned error code 0xC0202092. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing.
Error: 0xC0047038 at Staging Table Loading Data Flow Task, DTS.Pipeline: The PrimeOutput method on component "Invoice Raised Flat File Source" (3160) returned error code 0xC0202092. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing.
Error: 0xC0047021 at Staging Table Loading Data Flow Task, DTS.Pipeline: Thread "SourceThread2" has exited with error code 0xC0047038.
Error: 0xC0047039 at Staging Table Loading Data Flow Task, DTS.Pipeline: Thread "WorkThread0" received a shutdown signal and is terminating. The user requested a shutdown, or an error in another thread is causing the pipeline to shutdown.
Error: 0xC0047021 at Staging Table Loading Data Flow Task, DTS.Pipeline: Thread "WorkThread0" has exited with error code 0xC0047039.
Error: 0xC0047021 at Staging Table Loading Data Flow Task, DTS.Pipeline: Thread "SourceThread0" has exited with error code 0xC0047038.
Error: 0xC0047039 at Staging Table Loading Data Flow Task, DTS.Pipeline: Thread "WorkThread2" received a shutdown signal and is terminating. The user requested a shutdown, or an error in another thread is causing the pipeline to shutdown.
Error: 0xC0047021 at Staging Table Loading Data Flow Task, DTS.Pipeline: Thread "WorkThread2" has exited with error code 0xC0047039.
Information: 0x402090DF at Staging Table Loading Data Flow Task, PO_PENDING_STG OLE DB Destination [587]: The final commit for the data insertion has started.
Information: 0x402090E0 at Staging Table Loading Data Flow Task, PO_PENDING_STG OLE DB Destination [587]: The final commit for the data insertion has ended.
Information: 0x40043008 at Staging Table Loading Data Flow Task, DTS.Pipeline: Post Execute phase is beginning.
Information: 0x402090DF at Staging Table Loading Data Flow Task, INVOICE_STG OLE DB Destination [247]: The final commit for the data insertion has started.
Information: 0x402090E0 at Staging Table Loading Data Flow Task, INVOICE_STG OLE DB Destination [247]: The final commit for the data insertion has ended.
Information: 0x402090DF at Staging Table Loading Data Flow Task, OLE DB Destination [933]: The final commit for the data insertion has started.
Information: 0x402090E0 at Staging Table Loading Data Flow Task, OLE DB Destination [933]: The final commit for the data insertion has ended.
Information: 0x402090DD at Staging Table Loading Data Flow Task, PO Pending Flat File Source [2344]: The processing of file "C:Documents and Settingse402076Desktopitss flat filespo_pending.txt" has ended.
Information: 0x402090DD at Staging Table Loading Data Flow Task, Pending Files Flat File Source [3062]: The processing of file "C:Documents and Settingse402076Desktopitss flat filespending bills.txt" has ended.
Information: 0x402090DD at Staging Table Loading Data Flow Task, Invoice Raised Flat File Source [3160]: The processing of file "C:Documents and Settingse402076Desktopitss flat filesinvoices_raised.txt" has ended.
Information: 0x40043009 at Staging Table Loading Data Flow Task, DTS.Pipeline: Cleanup phase is beginning.
Information: 0x4004300B at Staging Table Loading Data Flow Task, DTS.Pipeline: "component "PO_PENDING_STG OLE DB Destination" (587)" wrote 75 rows.
Information: 0x4004300B at Staging Table Loading Data Flow Task, DTS.Pipeline: "component "OLE DB Destination" (933)" wrote 0 rows.
Information: 0x4004300B at Staging Table Loading Data Flow Task, DTS.Pipeline: "component "INVOICE_STG OLE DB Destination" (247)" wrote 0 rows.
Task failed: Staging Table Loading Data Flow Task
Warning: 0x80019002 at STAGING: The Execution method succeeded, but the number of errors raised (14) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
SSIS package "STAGING.dtsx" finished: Failure.
The program '[2532] STAGING.dtsx: DTS' has exited with code 0 (0x0).
View 6 Replies
View Related
Jul 5, 2007
We are going insane trying to start Report Manager on a SQL Reporting Services 2000 installation. The programmer/admin who originally set this up for us is gone.
We recently upgraded a database/application server to a new server, causing the data source being used by reports in reporting services to no longer be valid. Unfortunately, we do not have access to the original report project to 're-deploy' with the corrected data source.
We desperately need to get the reports that are installed to retrieve their data from the new database location/machine. We understand this can be done by specifying a new data source in Report Manager. (To clarify, we have NOT moved the report servier installation or database, these remain in place - it's just the deployed reports that no longer point to the correct data source.)
For some reason, our Report Manager will no longer run - when we try to launch it, we get a windows login dialog - nothing will work here. We've tried both local and domain admins and constantly get ACCESS IS DENIED 401.3 error messages that we do not have permission/problems with ACL's.
We've gone so far as to allow EVERYONE read/write access to the ReportManager and ReportServer folders and the RS virtual directories, but nothing seems to help.
Can anyone help with this? Ideas on how to change our data source, or how to get back into Report Manager?
Since we are somewhat technical, but not experts, and don't have much more time to waste, we are willing to pay $500 for this project to someone willing to access the server and fix the problem so that the reports point to the correct database and restore access to Report Manager.
Thanks in advance for any help.
View 1 Replies
View Related
May 16, 2007
I have a report that I want to setup as cached on the server.
As I understand it to do this I need to use stored credentials in the report's data source so that the report always runs with the same credentials.
Now how can I do this for a report that already exists?
I created a new Shared DataSource that has the credentials I want to use, but I can't seem to change the data source a report uses.
Thanks.
View 8 Replies
View Related
Feb 7, 2006
When I deploy the cube which is sitting on my PC (local) the following 4 errors come up:
Error 1 The datasource , 'AdventureWorksDW', contains an ImpersonationMode that that is not supported for processing operations. 0 0
Error 2 Errors in the high-level relational engine. A connection could not be made to the data source with the DataSourceID of 'Adventure Works DW', Name of 'AdventureWorksDW'. 0 0
Error 3 Errors in the OLAP storage engine: An error occurred while the dimension, with the ID of 'Customer', Name of 'Customer' was being processed. 0 0
Error 4 Errors in the OLAP storage engine: An error occurred while the 'Customer Alternate Key' attribute of the 'Customer' dimension from the 'Analysis Services Tutorial' database was being processed. 0 0
View 25 Replies
View Related
