Hi, all, does anyone know of a way to change default values inside of a table without affecting existing values?
I have a table with default = 0 in usermask column. Some rows already have non 0 values in them. I now need to change the default to 1 but still want the non 0 values be there. I also want the new default to take effect when new rows are entered. What's the best and quickest way to do it?
Thanks for advice.
Richard
The columns fro which we do not enter any values.Fro eg in my table i did not insert any values to Balance col,in my table.
In SQL 2005,management studio,when i said modify table and changed the default to 0 from NULL and also unchecked the checkbox saying Allow Nulls.
I did the above changes and said save.It gave an error saying
'AccountsBalance' table
- Unable to modify table.
Cannot insert the value NULL into column 'Balance', table 'AccountBalanceSheet.dbo.Tmp_AccountsBalance'; column does not allow nulls. INSERT fails.
The statement has been terminated.
Plz help
Poornima
I have a stored procedure with a SELECT statement, that retrieves 1 row.
SELECT name FROM tblNames WHERE nameID = "1"
I want all the NULL values in that row to be change in some default values.
How do I do this?
I need to update one column in a very large table. Can I bcp, bulk copy, bulk insert... one column from another table into an existing table? For example:
table RES column STATUS needs to be updated with the same column from another table (PROP).
I have looked at bcp but it looks like it wants to insert/update all columns in the row. I just need the one column updated and I need it done fast.
Any help would be appreciated.
Charlie.
I have my stored procedure set to
Territory_code IN (@Territory)
, now , how do i enter in more then one value. When i select the multi value check box, it gives me more spaces. But then doesnt recognize the values when i put in more then one. am i doing something wrong?
The field is a Varchar 20
I am working with SP. How can we find out values of parameters when the SP is executed with the default values?
View 9 Replies View RelatedA have a multi-valued parameter (B) which is dependent on a single-valued parameter (A) on my report. When a value is selected in A, I want all matching values in B to be selected by default and the "Select All" option checked. To do this I have set the Default Values section in B to point to the same dataset as the "Available Values" section. Both A and B have default values so the report runs automatically.
One of the values in parameter A (say Value1) yields more values in parameter B than the other (say Value2).
If I run the report the first time with Value1 selected as the default for parameter A, all values in B are checked correctly. If I run the report with Value2 selected the first time and then change the selected value to Value2 and run my report, all values in B are displayed but only the values that were previously checked (when Value1 was selected), are now checked, leaving the "Select All" unchecked.
What am I doing wrong? Why are all the values in B not checked? The dataset is the same in "Available Values" section and "Default Values" section.
I have a script that I use after some amount of data massaging (not shown). I would like to be able to change the
1) denominator value (the value 8 in line 32 of my code) based on how many columns are selected by the where clause:
where left(CapNumber,charindex('_', CapNumber)-1) = 1where capNumber is a value like [1_1], [1_4], [1_6]...[1_9] capNumber can be any values from [1_1]...[14_10] depending upon the specialty value (example: Allergy) and the final number after the equal sign is a number from 1 to 14)
2) I'd like to dynamically determine the series depending upon which values correspond to the specialty and run for each where: left(CapNumber,charindex('_', CapNumber)-1) = n. n is a number between 1 and 14.
3) finally I'd like to dynamically determine the columns in line 31 (4th line from the bottom)
If I do it by hand it's 23 * 14 separate runs to get separate results for each CapNumber series within specialty. The capNumber series is like [1_1], [1_2], [1_3],[1_4], [1_5], [1_6], [1_7], [1_8],[1_9]
...
[8_4],[8_7]
...
[14_1], [14_2],...[14_10]
etc.
Again, the series are usually discontinuous and specific to each specialty.
Here's the portion of the script (it's at the end) that I'm talking about:
--change values in square brackets below for each specialty as needed and change the denom number in the very last query.
if object_id('tempdb..#tempAllergy') is not null
drop table #tempAllergy
select *
into #tempAllergy
from
dbo.#temp2 T
[Code] ....
If I were to do it manually I'd uncomment each series line in turn and comment the one I just ran.
When I was using ALTER TABLE to create a new field, I accidentally type the wrong word as the DEFAULT.
I typed
ALTER TABLE mytable ADD reporting VARCHAR(15) NOT NULL DEFAULT 'Monthl';
I did not want 'Monthl', I wanted 'Month'.
How do I change it, drop it, modify it?
I've been looking through the on-line info from MS and I and very confused.
SQL Server 2000: Is it possible to change SQL server's default collation without reinstall ?
View 3 Replies View RelatedWe installed SQL 7.0 first, then SQL 2000. SQL 7.0 is the default instance.
How can we change the default to SQL 2000?
Is this the only way to rename the default SQLEXPRESS instance name?
http://support.microsoft.com/default.aspx?scid=kb;en-us;Q283811
Is there an easier way? I tried going to Register and changing it.. but that didn't seem to do anything.
Hi:
I'm using SQL SERVER 2005 EXPRESS
My server name is SERVER1SQLEXPRESS
When I create a new data base on my server it saves at
C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLData
How Can I change this default path?
Thanks!!
WE HAVE RECENTLY MOVED THE MSSQLBACKUP FOLDER TO EMC DRIVES E:, BUT SQL IS STILL DEFAULTING BACKUPS TO THE ORIGINAL DEFAULT LOCATION WHICH WAS ON THE D: DRIVE. DOES ANYONE KNOW HOW TO CHANGE THIS? I KNOW THE ORIGINIAL LOCATION IS STORED IN THE REGISTRY, BUT I DON'T KNOW IF I CAN CHANGE THE REGISTRY OR IF THERE IS A DIFFERENT PLACE. CAN SOMEONE PLEASE HELP.
THANKS
hai all,
I need to change the default port number of the SQL server from 1433 to some other port number. i know that it can be done thru SERVER NETWORK UTILITY. Can some one confirm that. It will be helpful.
Also i want to make sure that port to given is free port. how can i find that particular port is free.
Thanking in Advance, awaiting Quick response.
Signing Off
Venkatesh.V
Hello
The default location where db's are created is almost full.
Is there any way to change the default location where the .mdf and .ldf are created when I create a new db? I know I can do this when I create a new db and go select where I want it to be, but can I make it default to a different directory automatically so no human intervention is needed?
tia
r/P
Does anyone know how to change the default database in sql server 2005, I keep getting an error.
View 1 Replies View RelatedCan someone explain to me why the following doesn't work?declare @oname sysnameselect @oname=name from sysobjects where name like"df__mytable__mycol%"alter table mytable drop constraint @oname
View 4 Replies View RelatedHi,
I want to change the default date format from 'mdy' to 'dmy'. I can do this for session by using
SET DATEFORMAT 'dmy'
but I want to this permanent on Database level (preferred) or SQL instance level how can I do this?
Thanks in advance
I am trying to change the default trace value from 2 to 6, to incorporate rollover and server shutdown. I am using this code to create a new trace (with id: 2) with the value of 6 and use that to overwrite the default trace (with id: 1):
DECLARE @new_trace_id INT;
EXECUTE master.dbo.sp_trace_create
@someinteger = @new_trace_id OUTPUT,
@someinteger = 6,
@someinteger = N'C: raceTestTrace';
Then I disable the default trace. I am then using this code to overwrite the default trace (with id: 1) and replace with new value default trace (with id: 2):
-- get trace status
SELECT * FROM ::fn_trace_getinfo(NULL)
-- stop trace
EXEC sp_trace_setstatus @traceid = 1
, @status = 0
go
-- delete trace
EXEC sp_trace_setstatus @traceid = 1
, @status = 2
Then I enable the default trace. It works perfectly (default trace with id 1 is showing value 6) until I restart. Upon restart no default traces are enabled, once I run the script to enable the default trace then the values for the default trace (with id: 1) are back, and my value for rollover/server restart is back to 2.
Hi :
I am in the process of testing server name on which sqlserver is running.In this process i could sucessfully rename the server and bring the database online.I have renamed the server name in the system tables by using sp_dropserver and addserver .But still in the security logins i can see the agent logins not reflecting the change .
Oldservername SQLServer2005SQLAgentUser$oldservername$MSSQLSERVER.How can i modify these names.
thanks
Ganesh
The area to change my default database location is "greyed" out. I wish to put all my data on a seperate drive than the OS (D:). What am I missing that I can't change the default database location?
View 1 Replies View RelatedHi All
How to change default report paramter name to user defined parameter name in SSRS 2005.
Thanks
Dinesh
Hi All,
I need to change the default page that comes when i hit http://localhost/ReportServer in my browser.
Instead of listing the folders and reports i want to show my own page.
Is it possible to that?
Thanks
Looking forward to your replies
By default,when I would like to back up any database by SSMS.
default destination on disk will be C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLBackup every time
Although I everytime change it to my backup folder.
Please let me know how to change it.
Hi,
In my system, for creating a databae the default path is in C: drive, but iwant to change into D: drive as a default path.Please tell me how to change??
HiWhen we installed SqlServer2000 we left the default collation name(Sql_Latin1_General_CPI_CI_AS).The user defined databases we created afterwards were defined with adifferent collation name in order to be able to accept the character setwe use, Hebrew.We are looking into switching DTSs that we use to copy data from ourmain system , that uses an Ingres database, into OSQL scripts. Althoughthe DTSs successfully copy the Hebrew letters when I copy data with OSQLit comes over as jibberish.After looking into the matter I came to the conclusion that while DTSrefers to specific databases and uses the destination database'scollation name , OSQL refers to the remote server and destination serverand therefore uses the collation name of the server and not of thedatabase. In order for it to successfully copy the Hebrew I need tochange the default collation name of the installation.Is "rebuild master" the way to do such a thing ? (this is a productionserver so we are wary of doing a "rebuild master")Has anyone else run into similar problems when transfering data betweenservers using OSQL ?ThanksDavid Greenberg
View 3 Replies View RelatedHi, I've installed SQL 2005 and failed to change the default datalocation during installation. Now I want to change it. Can I do thiswithout having to uninstall and reinstall? And furthermore, is there asystem stored procedure I can use to move existing data and log files(master, msdb, AdventureWorks, etc.)? I seem to remember doing justthis with SQL 2000 some time back.Thanks,Eric
View 2 Replies View RelatedHow to change the default snapshot folder (Merge Replication) location in SQL Server 2012 Standard Edition? Actually that field is grayed out.
View 3 Replies View RelatedHello,
My WinCE device loads the Windows folder from NAND falsh on start-up and therefore I cannot install SQL into WindowsProgram files.
I would like to deploy SQLCE apps and dlls (from VS2005 or CAB file) into my NAND_Flash directory but I don't know how to do it.
Thx,
Uri
Hi folks,
Can you please tell me how should I change the default root directory (used for db storage) in SQL 2005 Std. Edition. ?
Currently its configured to:
C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQL
and I want to change the drive letter here.
Thanks in advance.
Cyk
I have had visual C# Express edition for a while, and had successfully used SQL Server 2005 express successfully since it was first released. I downloaded the new version with advanced services, created a new instance, and tried to use it. VC# wont connect cause it is still trying to connect to my old instance which no longer exists. Could someone please tell me how to make my new instance the one to log on to?
Thanks in advance,
Kent
Hello All,
Does anybody know how to achive that?
<add name="ConnectionString" connectionString="Dsn=dsn_name;uid=user;pwd=password" providerName="System.Data.Odbc" />
I have got this created by the wizard for my sqlDataSource. I am able to get data from tables in the default database specified with the DSN.
But I want to go to other database than the default.
Thanks a lot in advamce for your help!
Kazu