Changing Database Mail Host Database
Jan 26, 2007
Hi
I am trying to change the host database (MSDB) of Database Mail to some new database (say NewDB) and
unable to make DatabaseMail90.exe point to this new database (NewDB).
Is it possible to do this?
Thanks
Uddemarri
View 4 Replies
ADVERTISEMENT
Oct 14, 2015
I have database on localhost and i want to show this data on my website. I want to create a database online and want to sync with Local Host. Can it be possible syncing data automatically after some interval?
View 6 Replies
View Related
Mar 7, 2007
Lokendra writes "I have configured the Database mail profile and account in Sql Server 2005 but the mail is not sending and showing the following error message:
Error,235,The mail could not be sent to the recipients because of the mail server failure. (Sending Mail using Account 1 (2007-03-05T15:16:07). Exception Message: Cannot send mails to mail server. (Mailbox name not allowed. The server response was: Sorry<c/> that domain isn't in my list of allowed rcpthosts.).
),3000,90,,3/5/2007 3:16:07 PM,sa
but while in the same mail set up in previous instance of sql server 2005 the message was sending very well. After installing new instance of sql server 2005 the problem is arising.
Anybody can tell me that what I can do so that i can send mail using the SMTP databasemail account."
View 1 Replies
View Related
Oct 24, 2000
At work, we are in the process of moving a server running SQL Server 7 from one domain to another. A part of this domain change will necessitate that the server be renamed. In a couple of tests that we ran we found that changing the domain does not cause problems, but changing the server name does. How does one register the databases with the new server name without reinstalling everything from scratch?
Any assistance would be greatly appreciated as we are under a time crunch here. Please reply to my email as I am unable to check this board often.
Thanks,
Mike Sinnott
View 1 Replies
View Related
Jan 20, 2008
HiAs i have read, there have been discussions before how to move a local MDF databas to MSsql server at a webhost.But i cant figure it out, i know the answere is out there but i cant find it.I have downloaded the Host Deployment tool that generates a .sql file from my database, it looks ok.The problem is that my host dont allow me to execute this. I have also tried to run a file called RunSql.aspx that should help me execute my .sql file.But i recieve errors
Opening url http://mydomainz1.com/mydbfile.mdf.sqlAn error occured: System.Net.WebException: The remote server returned an error: (404) Not Found. at System.Net.HttpWebRequest.GetResponse() at ASP.runsql_aspx.__Render__control1(HtmlTextWriter __w, Control parameterContainer) in d:hsadminaccoundidmydomainz1.comRunSQL.aspx:line 58The line 58 is empty
Is there anyway that a mdf file that i have build in VWD 2005 can work as a standalone database?I would like it to be as a .mdb database that is simple to move and so on.
Or do the mdf database have to have a MSsql Express or a MSsql Server?
Grateful for help!
/ mitmit
View 1 Replies
View Related
Feb 10, 2006
I created a sqlexpress database in visual studio 2005 and can't figure out to move the database to my hosting company( godaddy ). I can't connect remotely to the database on my hosting company. Whats the best way to go about this?
View 1 Replies
View Related
May 21, 2007
Hi. I have a client with a database hosted on SQL Server 2005. I don't have a paid version of SQL Server at home so am just using SQL Server Express. I'm getting INCREDIBLY FRUSTRATED that I can't use the "copy database" wizard from SQL Server Express.
Am I just out of luck on this? I can't use the "copy database" feature since I'm using Express. I can't get the actual files since the database is on a shared server. I know I'm not the only person with this issue; I see people asking the question but I don't see any answers.
Is there any way I can copy this database?
Thank you very very much,
- Andrew Clarke.
View 5 Replies
View Related
Feb 20, 2008
Hi all....
Our company use yahoo business mail server for our corporate mails. I know that I can configure database mail with SMTP. But when I try to configure database mail account with yahoo bizmail, I cannot do that. It gets configured but when I test it it doesn't send any mails. Do I need to have any special condiguration for this. SMTP address is smtp.bizmail.yahoo.com. Also I have specified the Authentication using my user name and password. Please help
Thanks
Rajesh
View 10 Replies
View Related
Sep 1, 2006
Hello
I have got a script which gives the mail to the dba mail box when database backup fails.
In the script I want to make a change so that I get the particular database name , on what ever database i implement.
Can you tell me some suggestions.
The script I am using is :
use master
go
alter PROCEDURE dbo.SendMail
@to VARCHAR(255),
@subject VARCHAR(255),
@message VARCHAR(8000)
AS
BEGIN
SET NOCOUNT ON;
DECLARE
@rv INT,
@from VARCHAR(64),
@server VARCHAR(255);
SELECT
@from = 'testsql2000@is.depaul.edu',
@server = 'smtp.depaul.edu';
select @message = @message + char(13) + Char(13) + @@servername + '-'+ db_name()+ '-' + 'Backup Status Failed' + Char(13)
EXEC @rv = dbo.xp_smtp_sendmail
@to = @to,
@from = @from,
@message = @message,
@subject = @subject,
@server = @server;
END
GO
--- After the above script is run the following should be given in the 2nd step when
--- the backup jobs are scheduled ------
exec master.dbo.sendmail
@to = 'dvaddi@depaul.edu',
@subject =' Test sqlserver 2000',
@message = '' ;
Thanks
View 4 Replies
View Related
Feb 18, 2002
Issues on Changing Name of our SQL Server Host
Michael G (m1g@hotmail.com)
We are going to rename the Server machine Host Name that our SQL2000
(named instance) Server now resides on.
* I am searching for all references in Operating System items, such as .cmd, .bat. ftp files referring to it (eg., sqlservNM)
* I am searching for all references in Operating System items, such
as ODBC, VB ADO, DOA and DSN-less connections that refer to it.
These references will be changed manually on the day of the change.
I am NOT so certain that I need to search for all SQL Server Objects referring to it, (eg., DTS packages and scheduled Jobs). Must these
objects be changed manually or will they be redirected somehow?
Anyone with any experience on this?
Thanks,
Michael
View 1 Replies
View Related
Mar 14, 2007
Hi,
I have a hard time copying my db (or instance?) from a SQL Server 2000 db which resides at my web host. I have Sql Server 2005 Express and Sql Server Management Studio Express on my computer and, well, there is no "ftp-like" option so I don't have a clue about how to proceed. I've read many posts on the net on this matter but nothing seems to apply to this, in my mind, rather common, configuration.
I have receieved Excel docs that should be appended to tables in my db. I have successfully installed DTS (see http://mobiledeveloper.wordpress.com/ for details - it's really simple but takes two hours) so I have a wizard for the actual import from Excel. My plan is now to
1. download/detach/whatever my table/db/part of the web host's db and download it to my computer. Then
2. fill the tables with the data from Excel. And finally, to
3. upload/attach/whatever my local db or table to the web host again.
I'm sooo confused, please, please help me out here!
Pettrer
View 1 Replies
View Related
Apr 23, 2008
I have a application which uses the automatic asp.net membership stuff to make it work. (In app_data). It works fine on local host, but when I use it on the web server I get the error message (after clicking the log in button):An error has occurred while establishing a connection to
the server. When connecting to SQL Server 2005, this failure may be
caused by the fact that under the default settings SQL Server does not
allow remote connections. (provider: SQL Network Interfaces, error: 26
- Error Locating Server/Instance Specified) Please help me fix this. Thank you for your help,Sam
View 6 Replies
View Related
May 6, 2008
hi my local host cannot open the connection to my database, whilst testing with vwd seems to be able to do this? other server side functions work (response.write("hello world"))
in my iis the version of .net it says its running reads: 2.0.50727, though when i go to add / remove programmes i have 3.5 there? maybe its nothing to do with .net versions?
thanks in advance for your help
pete
View 5 Replies
View Related
Feb 23, 2006
Hi,On my laptop I am running Virtual Server 2005 with 2 x Windows 2003Servers. Both the VS can access the internet and shared files on thehost laptop. On the host laptop I have a SQL Server 2000 running.I have written a Windows Service to detect Application Errors and fireduplicates of events to the database, and this service sits on both VS.It does work as I have tested it on host. BUT everytime I makeapplication errors on the VS nothing is deposited into my database.Very frustrating!I have also tried to create a ODBC connection through the Data SourceAdministrator, and when I enter the login credentials for SQL I getconnection error messages.Any suggestions would be great!ThanksSun
View 3 Replies
View Related
Jun 30, 2015
I am not MS SQL Developer, and I have no experience with it. I have had to use it as a part VAMT database of keys and activation.
There is 8.1 box with MS SQL (express I think).
After change host name I cannot connect to database with error "The specified database is not a valid VAMT database."
Looking into log gives me: Could not obtain information about Windows NT group/user 'litkjonca', error code 0x534."
Some googling suggest to use:
sp_dropserver "..." and sp_addserver '...', local
but with no effect .
View 17 Replies
View Related
Mar 9, 2007
Hi every body
I want to send a simple mail using DATABASE MAIL feature in SQL SERVER 2005.
I've defined a public profile.
I've enabled Database Mail stored procedures through the Surface Area Configuration .
but I can't send a mail with sp_send_dbmail stored procedure in 'msdb' database .
when I execute sp_send_dbmail in the Managment Studio the message is
"Mail queued" but the mail is not sent.
Could it be related to Service Broker?Because the Surface Area Configuration indicates:'this inctance does not have a Service Broker endpoint'.If so, how should I make an endpoint?
here is the log file after executing sp_send_dbmail:
1) "DatabaseMail process is started"
2) "The mail could not be sent to the recipients because of the mail server failure. (Sending Mail using Account 2 (2007-03-08T00:49:29). Exception Message: Could not connect to mail server. (No connection could be made because the target machine actively refused it)."
The DatabaseMail90.exe is triggred ,so the mail is transfered to the mail queue but DatabaseMail90.exe couldn't give the mail to SMTP server.The promlem is what should I do to make DatabaseMail90.exe able to connect to the server?
please help me.
POUYAN
View 21 Replies
View Related
Sep 5, 2006
HiI'm new this .I' using SQL 2005 VWD05.Could some body tell me how to upload to my host server database to to run a membership user account.I dont know what are the procedure to do on my pc in order to transfer the file on the database.Thanks
View 25 Replies
View Related
Mar 22, 2007
I have an ASP.NET application that runs under the development server. Before deploying to my host I wanted to test it under IIS. I set up a virtual directory under IIS, but when I try to open the home page I get an error Unable to open the physical file
"E:CDiskLocalWebSitesDIWSchedulingApp_DataDIWDB.MDF". Operating
system error 5: "5(Access is denied.)".and a code dump showing that the code is breaking at the open connection. A little research on the error indicates that IIS does not have permission to execute the database operation. I can not find any information on how to give IIS this permission in SQL Server 2005 Express. Any guidance would be appreciated.
View 7 Replies
View Related
Dec 30, 2014
How to find the list of queries currently running in the Database with User Login Information.
Since my database application is running slow, to find the slow queries.
View 8 Replies
View Related
Nov 19, 2002
hi, I have created a database in sql server 2000. I need to duplicate the database under different name, how can I do that?
Also, can I rename a database name?
thanks
Ali
View 3 Replies
View Related
Nov 6, 2007
Hi,
Can anyone please tell me the difference between Database Mail and SQL Mail.
Thanks in Advance
R.K.Nair
RKNAIR
View 1 Replies
View Related
Sep 13, 2006
HI,when configuring database mail in sql server 2005 i am getting the below error.The mail could not be sent to the recipients because of the mail server failure. (Sending Mail using Account 4 (2006-09-13T13:50:18). Exception Message: Could not connect to mail server. (An established connection was aborted by the software in your host machine). )when i ping the smtp server, i could successfully connect to the smtp server. but when i send a test email i am getting the above error message saying not able to connect to the server.please help
View 2 Replies
View Related
Aug 22, 2007
Hello,
I am trying to use database mail to send out a list of data. I am using a number of queries to build a string and each query needs to have its results displayed on a new line when the email is viewed using Outlook.
I am having trouble adding a line break into the string. Any pointers would be great.
Thanks Alot
Steve
View 2 Replies
View Related
Apr 9, 2008
What is equavalent in oracle database which does the job similar to Database Mail in sql server.
i use database mail in sql server to send mail.
I do have jobs set, which gets fired every ten minutes. it uses msdb.dbo.sp_send_dbmail
and i have a profile created under database mail which has all the info related to the smtp email acct.
our client now wants our project to also work on oracle.
Thank you very much for the information.
View 1 Replies
View Related
May 2, 2008
hi,
In database mail,
while execting sp_send_dbmail i want foolowing thing to be done.
@recipient=select emaild from <tablename>
Is it possible ?
View 2 Replies
View Related
May 26, 2008
Please Concentrate on colored TSQL;
I should i pass dynamic text to database mail in @body.
Declare @charstrn varchar(20);
Declare @C_name varchar(20);
Declare @l_code nvarchar(20);
SET @charstrn = @S_name+'Welcome to India.You are now registered Student under counslerName'+@C_name+'BranchOffice'+@l_code;
EXEC msdb.dbo.sp_send_dbmail
@profile_name = 'Pradeepvarun',
@recipients = @emailid ,
@body = (select @charstrn),
@subject = 'You are now Registered in APT';
View 1 Replies
View Related
Jun 6, 2008
Hi All,
I am going made here. I set up database mail on a 2005 box. It was working fine, untill I needed to reboot it. Now it does not.
If I run a test with 2000 it works fine. However 2005 does not.
I go to the test mail bit and it says its sent, but it never turns up. So I ran:-
SELECT * FROM msdb.dbo.sysmail_event_log
And I get the fowwloing error:-
259error2008-06-06 16:38:24.493Could not retrieve item from the queue.5708NULLNULL2008-06-06 16:38:24.493UK_domainUSER
Any ideas at all would be gratfull aprisiated!!!
Thanks
Dave
Dave Dunckley says there is a law for the rich and a law for the poor and a law for
Dirty Davey.
View 8 Replies
View Related
Mar 19, 2007
I have an application which allows communication through an internal blog. We have to monitor all communications for compliance but I'm unable to find a solution to my problem and hope someone can help.
The application allows IM/Email/Blog entries to authenticated members. We can take these communications and send them to our exchange server. However the FROM address is always the profile owner setup in SQL.
Question:
I want the FROM address to list the person starting the conversation and not setup individual profiles for each person using the application. We already have the ability to capture the communication through the application and send it to exchange but the FROM address doesn't reflect the person initiating the conversations.
Is this possible?
Thank you, MP
View 1 Replies
View Related
Mar 30, 2008
Hi, i need to send emails from sql server. to configure the setting i need to open database mail configuration windows right? But i dont have database mail icon or tab under management folder. I only have archieve under server roles. Help me.. Urgent.Thanks
View 7 Replies
View Related
Feb 2, 2007
I'm keen to use database Mail in SQL 2005. It seems to work well and save's me having to implement a queue, audit logging for sent/errored etc, as SQL2005 can take care of all of that for me.
heres the but..
Is there any way to specify the "From" email address in sp_send_dbmail I know you specify it as part of email account & profile but I want to override that.
I just wanted to be able to keep an audit of all the emails that where sent from an asp.net website and thought i could get that functionality "out of the box" with SQL 2005 and DB Mail, but with out being able to set the from: address its not going to work
Any one have a sugesstion?
Thanks
View 1 Replies
View Related
Apr 9, 2008
Dear Profetionals ,
I am new in SQL I would like to set up a Database mail but I have no Mail Server in my Domain. So, I have to use yahoo pop3 and smtp whitch are mentioned here :
Incoming Mail (POP3) Server:
plus.pop.mail.yahoo.com (Use SSL, port: 995)
Outgoing Mail (SMTP) Server:
plus.smtp.mail.yahoo.com (Use SSL, port: 465, use authentication)
Account Name/Login Name:
Your Yahoo! Mail ID (your email address without the "@yahoo.com")
Email Address:
Your Yahoo! Mail address (e.g., user@yahoo.com)
Password:
Your Yahoo! Mail password
I used my yahoo email account and plus.smtp.mail.yahoo.com port: 465 to configure the Databast Mail
But no test mail recieved , Then I tried SQL help and found this SELECT * FROM msdb.dbo.sysmail_event_log ;i used this SP and the result was :
1 information 2008-04-08 14:53:53.397 DatabaseMail process is started 1188 NULL NULL 2008-04-08 14:53:53.397 IMPSDevuser2 error 2008-04-08 14:54:11.190 The mail could not be sent to the recipients because of the mail server failure. (Sending Mail using Account 1 (2008-04-08T14:54:10). Exception Message: Could not connect to mail server. (No such host is known). ) 1188 1 NULL 2008-04-08 14:54:11.190 saWould you please help me find the error?
View 1 Replies
View Related
Apr 12, 2006
I am trying to configure Database Mail on a new installation of SQL Server 2005 and the 'DatabaseMailUserRole' does not exist.
How do I add this role to the server?
View 8 Replies
View Related
Aug 16, 2007
We have a user set up for our .net framework (webuser) with access to a database we created for our website. "webuser" needs to be able to send out emails using Databse Mail (SQL Server 2005) via a stored proc by excuting msdb.dbo.sp_send_dbmail. This stopred proc works fine when I am logged in as administrator but won't work for "webuser" and I can't seem to grant DatabaseMailUserRole to our that user either. What do I need to do?
I have bee trying to find a "how to" on setting this up but have been unsuccessful.
View 3 Replies
View Related