Hello!
We will be moving our two cluster running SQL Server 2005 64-bit SP2 on Windows 2003 to the different datacenter. IP addressed of both nodes will be changed by DNS names remain the same. I was wondering if anyone had issues with this. Out thought is that we just need to update IPs in Cluster Manager.
Comments are welcome.
Igor
SQL Server Configuraton Manager,
Protocols for sqlexpress,
TCP/IP
When I initially installed SQL Server 2005 Express, it automatically picked up all the IP addresses (60 of them) I had on the server, and filled them in under TCP/IP - IP adresses Tab.
I recently took those IPs off the server and replaced them with 30 new IP addresses. Is there a way to have SQL Server 2005 Express read the Network configuration on the server and take the old IPs off the TCP/IP - IP addresses tab and put the new one's there?
Thanks,
Bill
Hello ALL
what I want to achieve is to load a text file that has email addreses from disk and using the email addresses in the text file look it up against the email addresses in the database table then once matched delete all the users in the table whose email address were in the text file.
I also want to update some users using a different text file.
Please help me with the best way to do this
Thanks in advance
In a two node cluster, is it possible to change from a Active-Passive configuration to Active-Active without completely reinstalling?
Thanks
We are running SQL Server 2000 w SP4 on a 2 node active/passive Windows 2003 w SP1 configuration. We are presented with 2 150GB LUNs and 1 600MB on particular SAN that does not belong to us. M: and N: drives are the datadrives and Q: is the quorum.
We now have our own SAN and we will be using it for the SQL cluster data storage. The SAN administrator stated that he will present me with 2 150GB LUNs and 1 600MB…pretty much the same configuration.
How will I be able to move all my data and configure the cluster to the new SAN?
Thank you for any help!
I know it's not possible, I've read the KBs. But I don't understand why not - from my testing, it looks like the only things that break are the domain groups to which the service logins are added. The service logins can be changed, as can the IPs, and SQL starts up just fine. The only problem is the domain groups.
I saw this KB:
http://support.microsoft.com/?kbid=910708
which says this:
After you install a SQL Server 2005 failover cluster, you can change the service accounts, but you cannot change the domain groups. If you want to use different domain groups, you must uninstall and then reinstall SQL Server 2005.
But it doesn't elaborate, it just says that the groups cannot be changed. Why not? That seems silly to me - it's not just a line in a config file somewhere? Can someone please give me a good reason why the groups cannot be changed?
I'm trying to connect to a local instance of SQL Server using an IP address and its not working. When I looked up the connect string, it shows only the IP address replacing the Server name, not the instance name, i.e. Server=127.0.0.1 - how does it know which instance to use?
Can I use the 127.0.0.1 loopback address for the server (as its on a local machine)?
Do I have to use 'Network Library = DBMSSOCN' to tell the client to use TCP/IP?
(TCP/IP is showing as an enabled protocol in the Client Network Utility)
I need to allow for many addresses in my database for each client that is entered. I'm looking for suggestions on how I should handle this. I will need to do mailings to the clients and will need a way to select the address record that the client indicates as the mailing place.
Thanks for any thoughts.
Morning all!
A quick question for you all, We will be changing the IP address of our SQL 7's server sometime next week. Does any1 know of any issues/problems that could occur if we do so?
Thanks in advance for any and all help
Gurmi
I got got a pile of bad email addresses to update in our SQL database.I know how to do this for individual records using the update command.Is there a way to execute an update using the list of addresses in anexcel spreadsheet or some other form of list? This kind of scriptingis new territory for me.
View 5 Replies View RelatedI want to replicate between 2 servers not on the same network. One has to be addressed by IP. Currently replication does not support IPs - anyone have a workaround. Will this be resolved in the future? Seems this is a pretty common scenario if your db is on a hosted site.
-cg
I hope someone can help me with this problem.
I need to replicate some tables from our store servers
to our corporate server. All of them are 6.5, and
the corporate server will subscribe and the stores
will publish. I have registered
all of our stores on the corporate server so that I can
enable them for replication.
The problem is that to be able to register them I had to create
a system DSN for ODBC, but that would only work if I used the
IP addresses. Unfortunately, then when I try to enable them
on the corporate server I get an error stating that name (which
is the IP address) is not a valid object identifier.
In ODBC I did actually use a real name (not an IP) for the
name, a normal description, and the IP is in the Server
field. Is there some way to use an alias? What am I doing wrong?
Below is a raw data with SQL script to create the temp table. This table is a scale down version of what I am working with. I am taking the addresses from several different sources and putting them in a temp table. Now, I need to remove the duplicate addresses for each ID. Duplicate addresses are okay for different IDs.
Raw Data
IDAddr1 CityStateZip
26205 N Main STChicagoIL52147
26205 N Main STChicagoIL52147
2685 Park AveChicagoIL52147
3535 Main StAustinTX78715
35976 Ponco StDallasTX79757
359587 MopacAustinTX78715
4558741 Len LnDaytonFL74717
455518 Spring DrDaytonFL74717
45585 Park AveChicagoIL52147
Desired Result
IDAddr1 CityStateZip
26205 N Main STChicagoIL52147
2685 Park AveChicagoIL52147
3535 Main StAustinTX78715
35976 Ponco StDallasTX79757
359587 MopacAustinTX78715
4558741 Len LnDaytonFL74717
455518 Spring DrDaytonFL74717
45585 Park AveChicagoIL52147
CREATE TABLE #tmpTable(
[ID] Int,
[Addr1] [varchar](15) NULL,
[City] [varchar](9) NULL,
[State] [varchar](2) NULL,
[Code] .....
Is there a way to export a list of email addresses to outlook based on certain query conditions? So for example, lets say using pubs, I want to send out an email to a group of authors who have published only one book. So could I essentailly query for the authors and then have those corresponding authors emails sent to outlook so that I could send out a generic email asking them if they are going to write another book or something like that?
The Yak Village Idiot
I have a report with a Matrix table. When it€™s fully populated I have 5 rows. These rows are different categories in a CRM system. In these categories there are a lot of Opportunities listed. The thing here is that category 1-4 exist in one table, really a view, and category 5 exist in another different view. So to gather all the information into one single Matrix table to later have subtotals and stuff I just made a little Union of the two select queries.
Now one the column in the table is of course Topic. And from here my client wants to be linked to the right CRM card. The problem I have encountered is that how can I have to different addresses on one single cell in the table?
In the Navigation pane in the cell that corresponds to the Topic, for now I have an address like this:
=string.Format("http://{0}/SFA/opps/edit.aspx?id={1}", Parameters!srv.Value, Fields!objectid.Value)
What I need to change when it€™s a category 5 Opportunity is €œopps€? to €œcat5€?and add €œ&etc=10008€? to the end of the address. Any ideas?
PS. {0} and {1} are parameters, one server parameter and one opportunity ID parameter.
Kind Regards
Hi,
Is there any way to ony allow remote access to an instance of SQL Server 2005 from a specific set of ip adresses? (and How To..)
My problem is i only want certain machines to access the server. Any other suggestions to achive this are most welcome.
Thanks for your time
Leroy
Hi all,
I'm having a bit of an issue with this query. I'm not that familiar with MS SQL so please forgive me.
I'm trying to select the bad email addresses in a table so I can remove them or correct them but I'm not getting any results that are helpfull. Bellow are some of the queries I've tried
select email from person where email != "*@*"
returned all addresses plus null fields.
select email from person where email not like "%@%" (this didn't work at all)
And a few other that are similar
Could somebody please kick me in the right direction.
TIA
Jason
I have a string like this one in my column
Mike@yahoo.com, Bill@aol.com, Dan@yahoo.com, Frank@gmail.com
In my result set I need to display all email addresses that do not have the @yahoo.com domain.
Greetings:
I read with great interest a post on getting hte top 75 per cent by month, but still get through this problem. I have a table containing addresses, city names and state names, Each row has a unique address. I want to get the first ten addresses for each city in each state. I've tried something like the following which didn't work. Suggestions on how to solve the (simple) problem would be appreciated.
Select top (10) city,state,address
from address_list
alan
Hi All,
A client of mine has an update to the software they use which requires SQL ports to be pinholed on the
router to allow direct connctions from point of sale terminals. I'm not happy with the idea but thats not my call.
Is there a way to restrict IP addresses that can connect to SQL Express ? (without havng to get them to buy
a new router)
Cheers.
Irish
I have dumped html in a table and am looking to extract email addresses from it. Within the html, the email addresses are followed and preceded by blank spaces. I am playing around with the following code:
SELECT RIGHT(@email, LEN(@email) - CHARINDEX('@', @email)) as Domain
but have been unable to extract whole email addresses.
I have several 64 bit SQL 2005 servers that up to 4 named instances residing on them. Before going into production I need to change the port addressing to use fixed TCP ports. I have SQL Browser running to enbale me to see the named instances.
What steps are required to change to using specific TCP port addresses and is there a particular range to use ?
I have the following code on a form:
<asp:SqlDataSource ID="building_a" runat="server" ConnectionString="<%$ ConnectionStrings:vol1ConnectionString4 %>"
SelectCommand="SELECT [E_MAIL] FROM [Sheet4$] WHERE ([BUILDING] LIKE '%' + @BUILDING+ '%')" OnSelecting="building_a_Selecting">
<SelectParameters>
<asp:Parameter DefaultValue="a" Name="BUILDING" Type="String" />
</SelectParameters>
</asp:SqlDataSource>
<asp:SqlDataSource ID="building_b" runat="server" ConnectionString="<%$ ConnectionStrings:vol1ConnectionString4 %>"
SelectCommand="SELECT [E_MAIL] FROM [Sheet4$] WHERE ([BUILDING] LIKE '%' + @BUILDING+ '%')" OnSelecting="building_b_Selecting">
<SelectParameters>
<asp:Parameter DefaultValue="b" Name="BUILDING" Type="String" />
</SelectParameters></asp:SqlDataSource>
<asp:TextBox ID="subj" runat="server" Width="500px">Subject</asp:TextBox><br /><br />
<asp:TextBox ID="messg" runat="server" Rows="20" TextMode="MultiLine" Width="500px">Message</asp:TextBox><br /><br />
<asp:Button ID="bldga" runat="server" Text="Building A" OnClick="Button1_Click" /><br /><br /><asp:Button ID="bldgb" runat="server" Text="Building B" OnClick="Button2_Click" /><br /><br />
<asp:Label ID="resultLabel1" runat="server" ForeColor="red"></asp:Label>
And I have the following code behind:protected void Button1_Click(object sender, EventArgs e)
{SmtpClient smtpClient = new SmtpClient();
MailMessage message = new MailMessage();
try
{MailAddress fromAddress = new MailAddress("me@mydomain.com", "My Name");MailAddress toAddress = new MailAddress("them@theirdomain.com");
message.From = fromAddress;
message.To.Add(toAddress);
message.Subject = subj.Text;message.IsBodyHtml = false;
message.Body = messg.Text;smtpClient.Host = "myhost";
smtpClient.Send(message);resultLabel1.Text = "Email sent!";
}catch
{resultLabel1.Text = "Send failure";
}
}
The queries get e-mail addresses from a SQL database for all people who work in a particular building.
The buttons will send an email if I give a To address.
How do I write the code so that clicking on the "Building A" button will send the e-mail to the addresses from the query results individually?
Any ideas?
We have SQL Server 2000 Standard and recently moved from Exchange 5.5to Exchange 2003. This problem occurred both before and after thee-mail change.We would like to send notifications of failed jobs to multiple peoplein case one person happens not to be in on the day there is a problem.Setting up an operator with an e-mail name that combines twoaddresses seems to work ok as long as we use a format like thefollowing:smith_john; jones_maryorJoin Bytes!; Join Bytes!However, when we add a third name, we start getting problems. Thefirst and third accounts listed get the message but the second onedoes not -- apparently because the address gets corrupted. Forexample (based on the message received at one of the good addresses),a message sent to:Join Bytes!; Join Bytes!;Join Bytes!goes to Smith and Jackson successfully but Jones' address is corruptedto:Join Bytes!omand, of course, fails.From some other testing, it appears that the last three characters ofthe first address always get appended to the end of the secondaddress.Has anyone else run across this? If so, is there a known fix? I hadhoped Exchange 2003 would fix the problem. Most likely, we will trysetting up a personal distribution list under the account from whichthe messages are sent. I just wanted to give one more shot to findingthe problem -- both because I would like to know and because beingable to string together addresses is a little easier than having to gothrough the person who can give us access to the account to set thePDL.Thanks.Jonathan LevyChicago Department of Public Health
View 1 Replies View Related
Hello ALL,
My source columns are:
Customer Record DESTINATION TABLE
Name Address_line_1
sex city
PID state
legal_street zip_code
legal_state ID
legal_city
mail_street
mail_city
mail_state
mail_zip
My client needs. All Unique Addresses from the Source.
.
That is the duplicates should be removed and uniques should be available.
Please let me know first what he wants then also tell me what to use in the data flow and how to start. I want to understand the logic. Note: Two persons might have the same address or One address might belong to 2 or more people.
This is what my client said.
Please give me what should i have in the output
I am developing a website in visual stadio 2005 and i use vb as a programming language.
I use image button control to show advertisemet in the website. i need to link advertisement to others website URL.
The URLs are sql driven( I stored them in SQL database). what should i to do?
Please help me.
Thanks
I think theres something I'm missing about AG listeners. My test config is 1 SharePoint WFE & 2 SQL servers configured in an AAG.WFE, SQL1 & SQL2Â servers are all on the same subnet.On the WFE, I configured an alias called SP15 to be used for the SQLÂ servers. If I failover from SQL1 to SQL2 I just need to change where the alias is pointing on the WFE. So why do I need a listener? This works fine, albeit manually.I have read on some posts that an automatic failover process is possible. How can I add a 2nd IP address to the listener when both SQL servers are on the same subnet? The GUI doesn't seem to allow this.
View 5 Replies View RelatedHello Guys,
I had been trying to solve this error with no success :
One or more of the server network addresses lacks a fully qualified domain name (FQDN). Specify the FQDN for each server, and click Start Mirroring again.
The syntax for a fully-qualified TCP address is:
TCP://<computer_name>.<domain_segment>[.<domain_segment>]:<port>
I had installed three instances on my local machine to test Data base mirroring :
Principal : running SQL Developer Instance
Mirror : running SQL Developer Instance .
Witness : Running SQL Express.
Database mirroring already enabled using startup flag : -T1400
i even tried to configure it with out a witness but still have the same error .
I used the follwoing server name in the mirroring wizard(not localhost) :
Principal : TCP://Ali-laptop:5022
Mirrored : TCP://Ali-laptop:5023
Witness : TCP://Ali-laptop:5044
whats the problem guys?!
During the installation of Adding node to a SQL Server failover cluster(On passive node) getting error like.. The MOF compiler could not connect with the WMI server. This is either because of a semantic error such as an incompatibility with the existing WMI repository or an actual error such as the failure of the WMI server to start.We  run the below commands but didn’t get any resolution & got the same above error .
Â
1<sup>st</sup> Method…
1. Open console command (Run->CMD with administrator privileges).Â
2. net stop winmgmtÂ
3. Rename folder %windir%System32WbemRepository to other one, for backup purposes (for example _Repository).Â
4. net start winmgmt
2<sup>nd</sup>Â Method..
1. Disable and stop the WMI service.
a) Command : - sc config winmgmt start= disabled
b. Command : - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â net stop winmgmt
2. Run the following commands.
a). Command: Winmgmt /salvagerepository %windir%System32wbem
b). Command: Â Winmgmt /resetrepository %windir%System32wbem
3. Re-enable the WMI service
Command:Â Â Â Â Â Â Â Â Â sc config winmgmt start= autoÂ
Last command to run after above steps
4. Command:Â Â Â Â mofcomp "%programfiles(x86)%Microsoft SQL Server100Sharedsqlmgmproviderxpsp2up.mof"
File not found Error for above command.
I am in the process of moving databases from a SQL 2005 Standard version to a 2-node 2014 cluster.All of my 2005 databases back up successfully.They all restore without issue except for one database that has a full text catalog. I get this message
Msg 7610, Level 16, State 1, Line 2
Access is denied to "fileStoragedataMSSQLSERVERFullTextCatalog", or the path is invalid.
Msg 3156, Level 16, State 50, Line 2
File 'sysft_FTCatalog' cannot be restored to 'fileStoragedataMSSQLSERVERFullTextCatalog'. Use WITH MOVE to identify a valid location for the file.
Msg 3119, Level 16, State 1, Line 2
Problems were identified while planning for the RESTORE statement. Previous messages provide details.
Msg 3013, Level 16, State 1, Line 2
RESTORE DATABASE is terminating abnormally.
[code]....
I went as far as giving the folder full access to everyone temporarily and received the same error.
I ran the Advanced cluster preparation for a new sql instance on an existing cluster.
Slq Server 2012.
After is completed, it was successful, I realized I specified the wrong Instance Root directory.
Is it possible to remove what the preparation installed? Or is it possible to change the root directory?
Can I build a cluster by adding the cluster service, then the SQL instances, then add the other nodes and their passive SQL instances?I would lean to building the cluster first, the add the SQL instances.
View 4 Replies View RelatedI´ve been reading that SQL Server 2012 Always On is dependent on having a Windows Failover Cluster setup. Is that correct ?
View 6 Replies View Related