Changing TCP/IP IP Addresses Under Protocols For SQLExpress
Jun 16, 2007
SQL Server Configuraton Manager,
Protocols for sqlexpress,
TCP/IP
When I initially installed SQL Server 2005 Express, it automatically picked up all the IP addresses (60 of them) I had on the server, and filled them in under TCP/IP - IP adresses Tab.
I recently took those IPs off the server and replaced them with 30 new IP addresses. Is there a way to have SQL Server 2005 Express read the Network configuration on the server and take the old IPs off the TCP/IP - IP addresses tab and put the new one's there?
We will be moving our two cluster running SQL Server 2005 64-bit SP2 on Windows 2003 to the different datacenter. IP addressed of both nodes will be changed by DNS names remain the same. I was wondering if anyone had issues with this. Out thought is that we just need to update IPs in Cluster Manager.
what I want to achieve is to load a text file that has email addreses from disk and using the email addresses in the text file look it up against the email addresses in the database table then once matched delete all the users in the table whose email address were in the text file.
I also want to update some users using a different text file.
I need to find out what protocols are used by our client to connect to the SQL Server ? And is there a way through which we can say that the client are using these protocols, from the Enterprise Manager ?
One more question i have is, I have a SQL server Installation at home on Win98. Why can't i rename the Server Name. I tried using the Sp sp_Dropserver,sp_addserver.
My ASP website is located on one server & the MS SQL 2000 which is located on a separate physical server behind a separate firewall.
My question is related to Application Communication. I want to know how do the Servers exchange data with one another: which (logical connections to use, which protocols to use)?
I am having a problem with one of the PC's That remotely connects to my server.
When you go to connection properties (under Connect to server in the Management studio) on the users machine there are no options under Network Protocol only the <default> option.
All the rest of our PC's have the option of choosing TCP/IP , named pipe etc etc..
This computer is not able to connect to the server remotely however it can/does when it is on the network.
I figure its because it is attempting to connect over named pipe rather than TCP/IP but i cannot change this in the connection options as it is missing.
And as far as i know on the server i have the default set to TCP/IP but I am really unsure of this.
If anyone can help me out with this i would greatly appreciate it.
If TCP/IP is the only protocol enabled on the General tab of the Client Network Utility, does it mean that other protocols are disabled and will not be used in communicating to SQL Servers on other machines?
In this case, should the registry HKEY_LOCAL_MACHINESOFTWAREMicrosoftMSSQLServer ClientSuperSocketNetLib only contain the Tcp entry?
If I have alias setup to use other protocol such as Named Pipes, does it mean that the alias cannot be connected since Named Pipes is not enabled?
I have successfully built a project and now want to deploy it for use, however I am getting the following error message:
Error 2 System.Web.Services.Protocols.SoapException: There was an exception running the extensions specified in the config file. ---> System.Web.HttpException: Maximum request length exceeded. at System.Web.HttpRequest.GetEntireRawContent() at System.Web.HttpRequest.get_InputStream() at System.Web.Services.Protocols.SoapServerProtocol.Initialize() --- End of inner exception stack trace --- at System.Web.Services.Protocols.SoapServerProtocol.Initialize() at System.Web.Services.Protocols.ServerProtocolFactory.Create(Type type, HttpContext context, HttpRequest request, HttpResponse response, Boolean& abortProcessing) d:infra srss reportinginfrainfraInfra Enterprise.smdl 0 0
I am running VS Team Suite, and did a fresh installation of SQL Server 2005.
When I try to deploy the sample reports, build was successful. However, when I try to deploy it, I got the following error:
System.Web.Services.Protocols.SoapException: Server was unable to process request, ---> System.NullReferenceException: Object reference not set to an instance of an object. at Microsoft.ReportingServices.Diagnostics.WebConfigUtil.GetWebConfigAuthenticationAttribute(String attrName) at Microsoft.ReportingServices.Diagnostics.WebConfigUtil.GetAuthenticationType() at Microsoft.ReportingServices.Diagnostics.WebConfigUtil.get_UsingWindowsAuth() at Microsoft.ReportingServices.WebServer.GlobalImpersonateClient() at Microsoft.ReportingServices.WebServer.ReportingService2005.ctor() -- End of inner exception stack trace.
I am trying to set up SQL Server 2005 to use a test certificate from Thawte for SSL encryption. I have installed the certificate in the local computer, current user and service account's personal certificates folders. I have also installed the root certificate in the Trusted Root Certification Authorities folders of each. All this was done using MMC.
However, when I go to tell SQL Server to use the certificate, no certificates show up in the drop down box. I am using SQL Server Configuration Manager and doing the right-clickPropertiesCertificate steps shown in multiple KB and forum articles.
I have also checked the registry entry at HKEY_LOCAL_MACHINESOFTWAREMicrosoftMicrosoft SQL ServerMSSQL.1MSSQLServerSuperSocketNetLibCertificate. It is blank, which tells me SQL Server should be looking in the certificate store.
If I simply set the ForceEncryption flag, SQL Server starts up OK and generates a self-signed certificate. Using that, the session does get encrypted. However, I need to use a third party certificate.
I have hit a brick wall and am at a loss. Any help would be greatly appreciated.
The SQL ERRORLOG shows: Error is 3414, Severity 21, State 2 and says: "An error occurred during recovery, preventing the database 'model' (database ID 3) from restarting." Just prior to this, I get a warning: "did not see LP_CKPT_END".
Any thoughts why this might be and how I can fix this?
I'm having issues with my sql server 2014 express configuration manager. I need to change protocols under Sql Server Network Configuration but there is nothing, no protocol listed, its empty.
I have created an installation application which will install the application with SQL Express and .NET Framework 2.0.
If i install this application in a Fresh system(i.e which is not having SQL Express), it is installing the application with new database instance successfully.
But if i try to install the same in a system which is already having SQL Express, throwing "Object reference exception" because it is not able to create the new database instance.
Because of numerous problems trying to get sqlexpress working, I uninstalled it with the intention of reinstalling (via Add or Remove Programs). However, now when I try to reinstall it, I get a message that the I am not making a changes so it won't let me install it.
I do have sql server 2005 developer's edition installed; is that the reason? and does that mean I cannot have both installed on the same machine?
I'm trying to connect to a local instance of SQL Server using an IP address and its not working. When I looked up the connect string, it shows only the IP address replacing the Server name, not the instance name, i.e. Server=127.0.0.1 - how does it know which instance to use? Can I use the 127.0.0.1 loopback address for the server (as its on a local machine)? Do I have to use 'Network Library = DBMSSOCN' to tell the client to use TCP/IP? (TCP/IP is showing as an enabled protocol in the Client Network Utility)
I need to allow for many addresses in my database for each client that is entered. I'm looking for suggestions on how I should handle this. I will need to do mailings to the clients and will need a way to select the address record that the client indicates as the mailing place.
A quick question for you all, We will be changing the IP address of our SQL 7's server sometime next week. Does any1 know of any issues/problems that could occur if we do so?
I got got a pile of bad email addresses to update in our SQL database.I know how to do this for individual records using the update command.Is there a way to execute an update using the list of addresses in anexcel spreadsheet or some other form of list? This kind of scriptingis new territory for me.
I want to replicate between 2 servers not on the same network. One has to be addressed by IP. Currently replication does not support IPs - anyone have a workaround. Will this be resolved in the future? Seems this is a pretty common scenario if your db is on a hosted site.
I hope someone can help me with this problem. I need to replicate some tables from our store servers to our corporate server. All of them are 6.5, and the corporate server will subscribe and the stores will publish. I have registered all of our stores on the corporate server so that I can enable them for replication.
The problem is that to be able to register them I had to create a system DSN for ODBC, but that would only work if I used the IP addresses. Unfortunately, then when I try to enable them on the corporate server I get an error stating that name (which is the IP address) is not a valid object identifier.
In ODBC I did actually use a real name (not an IP) for the name, a normal description, and the IP is in the Server field. Is there some way to use an alias? What am I doing wrong?
Below is a raw data with SQL script to create the temp table. This table is a scale down version of what I am working with. I am taking the addresses from several different sources and putting them in a temp table. Now, I need to remove the duplicate addresses for each ID. Duplicate addresses are okay for different IDs.
Raw Data IDAddr1 CityStateZip 26205 N Main STChicagoIL52147 26205 N Main STChicagoIL52147 2685 Park AveChicagoIL52147 3535 Main StAustinTX78715 35976 Ponco StDallasTX79757 359587 MopacAustinTX78715 4558741 Len LnDaytonFL74717 455518 Spring DrDaytonFL74717 45585 Park AveChicagoIL52147
Desired Result IDAddr1 CityStateZip 26205 N Main STChicagoIL52147 2685 Park AveChicagoIL52147 3535 Main StAustinTX78715 35976 Ponco StDallasTX79757 359587 MopacAustinTX78715 4558741 Len LnDaytonFL74717 455518 Spring DrDaytonFL74717 45585 Park AveChicagoIL52147
Is there a way to export a list of email addresses to outlook based on certain query conditions? So for example, lets say using pubs, I want to send out an email to a group of authors who have published only one book. So could I essentailly query for the authors and then have those corresponding authors emails sent to outlook so that I could send out a generic email asking them if they are going to write another book or something like that?
I have a report with a Matrix table. When it€™s fully populated I have 5 rows. These rows are different categories in a CRM system. In these categories there are a lot of Opportunities listed. The thing here is that category 1-4 exist in one table, really a view, and category 5 exist in another different view. So to gather all the information into one single Matrix table to later have subtotals and stuff I just made a little Union of the two select queries.
Now one the column in the table is of course Topic. And from here my client wants to be linked to the right CRM card. The problem I have encountered is that how can I have to different addresses on one single cell in the table?
In the Navigation pane in the cell that corresponds to the Topic, for now I have an address like this: =string.Format("http://{0}/SFA/opps/edit.aspx?id={1}", Parameters!srv.Value, Fields!objectid.Value)
What I need to change when it€™s a category 5 Opportunity is €œopps€? to €œcat5€?and add €œ&etc=10008€? to the end of the address. Any ideas?
PS. {0} and {1} are parameters, one server parameter and one opportunity ID parameter.
Hi all, I'm having a bit of an issue with this query. I'm not that familiar with MS SQL so please forgive me. I'm trying to select the bad email addresses in a table so I can remove them or correct them but I'm not getting any results that are helpfull. Bellow are some of the queries I've tried
select email from person where email != "*@*" returned all addresses plus null fields.
select email from person where email not like "%@%" (this didn't work at all)
And a few other that are similar Could somebody please kick me in the right direction.
I read with great interest a post on getting hte top 75 per cent by month, but still get through this problem. I have a table containing addresses, city names and state names, Each row has a unique address. I want to get the first ten addresses for each city in each state. I've tried something like the following which didn't work. Suggestions on how to solve the (simple) problem would be appreciated. Select top (10) city,state,address from address_list alan
A client of mine has an update to the software they use which requires SQL ports to be pinholed on the router to allow direct connctions from point of sale terminals. I'm not happy with the idea but thats not my call. Is there a way to restrict IP addresses that can connect to SQL Express ? (without havng to get them to buy a new router)
Hi All,I've been struggling with this for hours...Could someone please advise me on how to convert my current File based SQL Server Express website to a Server based SQL Express one.Particularly interested in what I need to do in the SQL Express management tool, changes I need to make the projecvt itself and changes needed to get IIS to understand things have been changed.Thanks,Martin.
I have dumped html in a table and am looking to extract email addresses from it. Within the html, the email addresses are followed and preceded by blank spaces. I am playing around with the following code:
SELECT RIGHT(@email, LEN(@email) - CHARINDEX('@', @email)) as Domain
but have been unable to extract whole email addresses.
I have several 64 bit SQL 2005 servers that up to 4 named instances residing on them. Before going into production I need to change the port addressing to use fixed TCP ports. I have SQL Browser running to enbale me to see the named instances.
What steps are required to change to using specific TCP port addresses and is there a particular range to use ?
