I am currently using SQL Server Enterprise Evaluation which runs out after 6months. When this happens or even sooner I plan to install SQL Server Developer.
My questions is can I copy all the things I develop (databases, cubes, reports,) from enterprise evaluation & import/load them into SQL Developer with no problems? Will everything integrate? Is there any implications?
I am wondering if it is possible to change from SQL Server Enterprise Evaluation Version to Developer Version. The reason is because the Enterprise Evaluation version expires after 180 days. So if I create reports and cubes in Enterprise Evaluation I can import them into Developer Edition right? Should I remove the Enterprise Evaluation version after 180 days or leave it then install Developer Edition?
View 1 Replies View RelatedI am download new Microsoft SQL Server 2005 Enterprise Evaluation Edition.. but how run it?
SQL Server Management is not enough!
Hi!
I download Microsoft SQL Server 2005 Enterprise Evaluation Edition (Self-extracting executables: X86 Executable ) from Microsoft site but when I try to unpack it the unpack program says it is corrupt. I have downloaded this file more than 5 times and still the same problem occurs. Is it only me or other has same problem? Any suggestsion?
Regards
We have an existing installation of SQL Server 2005 Developer Edition (64bit) that we are ready to go live with and would like to change the edition to Enterprise Edition (64bit). We have purchased all the appropriate licenses. We would like to avoid UN-installing the Developer Edition and RE-installing the Enterprise Edition. There must be some way to change a registry key, provide your serial number via a command line utility or re-run the setup with the license key provided and direct it to just change the edition from Developer to Enterprise and not change any of the other settings like service account, sa account, collation, etc. Any help is most appreciated.
Thank you,
Matt
Hello all,
Here I need some help or suggestions for the following topic...
I am using SQL server 2000 enterprise edition installed on the machine. Now I wanted to change the edition from enterprise to standard.
There are around 4 user databases exists on the server.
What are the areas I have to take care while doing this? Could I do as normal installation?
No log shipping implemented on the server.
Your suggestions would be very helpful to me.
Thanks in advance.
Is it possible to connect SSRS running on SQL Server 2005 enterprise edition (our production system) to a database running on SQL Server 2005 Developer's edition (our test system)
thanks!
Hi,
We have 2005 Standard Edition in our production environment and 2005 Developer Edition in dev. Recently we started using a feature in dev only to realize it was an Enterprise specific feature when we wanted to move it to prod. Is there any way to turn off the enterprise features in developer edition so it behaves just like standard edition?
Thanks
Charlie
I just installed SQl 2005 Developer Edition, and don't see an Enterprise Manager icon. Only Configuration Tool icons were installed.
Is this all SQL 2005 Developer is, or shoudl I be seeing an Enterprise Manager?
Thanks for your response,
Nate Terry
If I run the same FOR XML query in a Development edition enviornment and a Enterprise Edition environment, the results are different. The query is exactly the same.
Here is the query:
DECLARE @MessageBody XML
DECLARE @AuditTable SYSNAME
DECLARE @SendTrans BIT
DECLARE @SendAudit BIT
DECLARE @RecordCount INT
DECLARE @OperationType CHAR(1)
SET @RecordCount = @@ROWCOUNT
SET @OperationType = 'U'
SET @SendTrans = 1
SET @SendAudit = 1
SET @AuditTable = 'States'
SELECT @MessageBody = (
SELECT * FROM
(
SELECT TOP 10
'INSERTED' AS ActionType, @SendTrans AS SendTrans, @SendAudit AS SendAudit,
COLUMNS_UPDATED() AS ColumnsUpdated, GETDATE() AS AuditDate,
@AuditTable AS AuditTable, 'test' AS UserName, @RecordCount AS RecordCount, *
FROM l_states
)AuditRecord
FOR XML AUTO, ROOT('AuditTable'), BINARY BASE64)
SELECT @MessageBody
In my DEV env (Developer Edition), this result is produced:
<AuditTable>
<AuditRecord ActionType="INSERTED" SendTrans="1" SendAudit="1" AuditDate="2007-06-22T15:43:12.497" AuditTable="States" UserName="test" RecordCount="1" StateAbbreviation="AK" State="Alaska" />
<AuditRecord ActionType="INSERTED" SendTrans="1" SendAudit="1" AuditDate="2007-06-22T15:43:12.497" AuditTable="States" UserName="test" RecordCount="1" StateAbbreviation="AL" State="Alabama" />
</AuditTable>
In my Enterprise Edition evn, this is the result:
<AuditTable>
<AuditRecord ActionType="INSERTED" SendTrans="1" SendAudit="1" AuditDate="2007-06-22T15:44:48.230" AuditTable="States" UserName="test" RecordCount="1">
<l_states StateAbbreviation="AK" State="Alaska" />
<l_states StateAbbreviation="AL" State="Alabama" />
</AuditRecord>
</AuditTable>
Does anyone have any idea what might be wrong? Any help is greatly appreciated.
Tim
I tried to install this on the same box and I'm not sure how to reply to setup questions since I want to keep my SQL Server 2000 intact.
View 5 Replies View RelatedThis may be a stupid question, but can someone from MS SQL Server Team kind enough to confirm it, please?
View 3 Replies View RelatedHello,
Am currently on holiday and mistakenly broke my laptop.
I have been searching MS website to download the 180 day trial of MS SQL 2005 (Microsoft SQL Server 2005 Enterprise Evaluation Edition)
http://www.microsoft.com/downloads/details.aspx?familyid=6931fa7f-c094-49a2-a050-2d07993566ec&displaylang=en
I have registered twice, but the download seems to be elusive
Any pointers pls
Thanks
Ehi
Hi, all -
I'm trying to register a developer's 2000 pc from my 2005 pc.
i'm not sure this is even something possible from Dev Edition to Dev Edition- I can register a 2000 server just fine.
I can ping him. Both our systems have remote access 'on'. His server is (local), i've tried connecting to it by just entering his machine name and by using just the ip address. The error I get is "timeout expired. The timeout elapsed prior to completion of the operation or the server is not responding."
Am I just not registering this properly? I entered just the ip address in the 'server' box. I am connecting as sa with the pw he gave me. When i connect to my server, I use the ip addressinstance. However, I am not sure what to use for the instance when all I see when I look at his machine is (local).
I haven't needed to do this before.
Suggestions?
I am running the SQL server 2000 evaluation edition... and enterprise manager..does anyone know if this really expires....or can I keep playing around with it forever???same for enterprise manager...
View 1 Replies View RelatedHi
I am interested in taking MCTS exam 70-431 for sql server 2005 implementation and maintainance.
I have been reading the hardware requirements for the instalation of sql server versions and realise that enterprise and developer editions have same minimum requirements for the operation system.
I understand that the Developer Edition includes all the functionality of SQL Server 2005 Enterprise Edition, but it is licensed for use as a development and test system, not as a production server.
Also I undestand that the developer edition supports the Windows XP Home Edition with SP2 or later but the enterprise edition does not support this operating system. The evaluation/trial version is for the enterprise edition. Can I use the developer version of sql server 2005 for my practice exercises instead of using the trial version?
I have all hardware requirements for the trial enterprise version except that I am using Microsoft windows Xp home edition version 2002 with SP2. I am trying to see if I can use the developer version of sql server 2005 as it is cheaper for me to buy this software than buying the new operating system for my computer.
According to the microsoft book for the MCTS exam 70-431 there is a section which states that before you begin you should have Microsoft Windows Server 2003 running on your computer on an NTFS file system
(NTFS) partition. Will I still be ok to use the book and be able to do all the tests in the book if i am using the developer version of sql server 2005 with my Microsoft windows Xp home edition than using the trial version which comes with the book?
Thanks
gifty
As an ISV, I want to certify my product on Standard Edition. I am using Developer Edition everywhere. Is there a way I can do the certification using the Developer Edition, or do I need to obtain/purchase a copy of the Standard Edition?
View 3 Replies View RelatedFor testing purposes only, I'd like to install SQL Server 2000 Evaluation Edition on a server. From what I've read, this edition is a full Enterprise Edition, but it will expire after 160 days. But is it a full edition in the sense that users can connect to it when it's installed on a server, like if it was the Enterprise Edition? So far, I've only had it installed at local computers outside any network.
View 6 Replies View Related
I tried to download PerformancePoint Server Trial Version to ther server today and I got to the configuration point of the Analysis Services Setting, and when I clicked next to proceed with the configuration I got a popup error message:
"Microsoft Analysis Server must be Evaluation, Developer or Enterprise Edition".
Now I have SQL Server 2005 Developer Edition Disc (Bought it with Visual Studio 2005) but on the server I have SQL Server 2005 Standard Edition, if I try to run the sql server developer Edition disc, I use the wizard download and it seems that the download is going through the SQL Server entire download, it's like I'm re-downloading SQL Server all over again.
Does that seem right?
what is the best approach to work around this probelm?
I appreciate any help
Thanks
I upgraded a MS SQL 2005 Enterprise Evaluation/Trial to MS SQL 2005 Standard Edition with 5 User CAL.
I used the following command to upgrade:
start /wait setup.exe ADDLOCAL=SQL_Engine INSTANCENAME=MSSQLSERVER UPGRADE=SQL_Engine SKUUPGRADE=1 PIDKEY=<mykey> /qb
Once complete, "select SERVERPROPERTY('LicenseType')" returns DISABLED, but I expected that it would return PER_SEAT.
Thankfully, after the upgrade it does show EDITION=Standard Edition.
Questions:
1. How do I verify the license installed is the Client Access License of 5?
-- SQL Server 2005 does not seem to have the same SQL Licence control panel as did SQL 2000. It is not listed under Control Panel -> Licensing (only thing listed is 'Windows Server') nor under Administrator Tools -> Licensing.
2. How do you add CALs or change license type in SQL 2005?
-- I was also puzzled that I was not asked during setup of the license mode and/or number of licenses ( I did not get this on a fresh install of SQL 2005 SE either ).
Thanks for any assistance you can provide.
Ajay
I downloaded the SQL Server Evaluation Edition from Microsoft.com in ISO form and burned a CD using Nero 7. I have tried to install the program, but I keep getting the error:
"the procedure entry point_create_locale could not be located in the dynamic link library MSVCR80.dll"
I have tried to reinstall Native Client and Setup Support Files with no effect... I have .NET 2.0 installed along with VB Express 2005 and VWB Express 2005... I am running on Windows XP Home SP2.
If anyone could help me, I would greatly appreciate it... I am stuck and can't get any work done until I get this program installed...
When I try to install SQL Server 2005 evaluation edition, I keep getting the message that SQL server setup has detected beta components of SQL Server 2005 or Visual Studio 2005 which must be uninstalled for setup to continue. I have removed all beta components like sql 2005 ctp, visual studio 2005 beta, etc from my computer and yet it keeps giving me this message.
PLease help!!!! I am unable to install SQL Server 2005 evaluation edition.
Hi all,
I have downloaded Microsoft SQL Server 2005 Enterprise Evaluation Edition ISO from the following site and burned it onto a DVD.
http://www.microsoft.com/downloads/details.aspx?FamilyId=6931FA7F-C094-49A2-A050-2D07993566EC&displaylang=en
Prior to this I have installed Visual Studio 2005 Professional Edtion. During setup I have selected all the native client components i.e. Management Studio, Business Intelligense Studio. But after the install I am not able to see them under All Programs-> Microsoft SQL Server 2005. On further searching I have come across this link
http://channel9.msdn.com/ShowPost.aspx?PostID=142941
First of all, there is no sqlrun_tools.msi under setup folder of the dvd. And also when I tried to change component from Add/Remove programs and following the instructions as specified on clicking Change Installed components all that I see are: Connectivity Components and Software Development kit.
Could someone tell me how can I install Management Studio/ Business Intelligence Studio seperately? I don't want to go through the process of re-installation.
View 1 Replies View Related
Hello all. I'm giving serious thought on changing gears withing the IT world. For several years I have been a software developer who has been fortunate enough to have been involved in the needed databases. From just sketching out tables for the DBA to doing the database from the ground up and maintaining it during production. Along the way I've known that I didn't do as quality of a job as a knowledgeable DBA would do but given the situations I made do just fine.
I am considering switching gears to the database side only, coding as secondary. Since I am basically familier with most aspects of SQL Server in a general way, I am looking to take that knowledge and become a "Professional". What I am looking for is a few books to help out. Maybe a "Become a DBA for Software Developers" or something. I know that mining these and other forums are very valuble but I'd like some other training materials as well.
Have I been clear enough on what I am looking for? I don't quite feel like I have.
Basically, what would you recommend for a good software developer who is looking on switching to becoming a good database person?
I'd like to stay in SQL Server for now, since that is what they use here and it would give me an opportunity to practice.
Also, do you see value in the studying process for certifications in this area?
Hi
-I have istalled sql server 2005 standard edition , I want to install sql server 2005 enterprise edition on the same machine.
Is it possible? I have Microsoft windows server 2003 SP2 and 1GB RAM.
I want to use partition function with the enterprise edition, will the trial version of sql server work for me?
-If I have already created a database and tables using the standard edition, will I be able to access and use the database using the installed trial version or will I have to start a fresh creating a new database?
- Is it possible to access the same database with any of the installed versions?
BTW, I am prety new to sql server and databases , I am trying to learn by myself
Thanks
Dear All,We have a database which contains many tables which have millions ofrecords. When We attach the database with MS SQL Server 2005 StandardEdition Server and run some queries (having joins, filters etc.) thenthey take very long time to execute while when We execute same querieson Enterprise Edition then they run 10 times faster than on standardedition.Our database does not use any features which are present in EnterpriseEdition and not present in Standard Edition. We want to know what arethe differences between Standard Edition and Enterprise Edition forperformance. Why should we go for Enterprise Edition when StandardEdition has all the features required.We are presently using evaluation versions of SQL Server 2005 Standardand Enterprise Editions.Thanks and regards,Nishant Sainihttp://www.simplyjava.com
View 23 Replies View RelatedI am attempting to upgrade a 2005 Standard Edtion to Enterprise Edition. This is a default instance. All components are upgraded successfully except the Database Engine. I receive the following error:
SQL Server Setup has encountered the following problem: [Microsoft][SQL Native Client][SQL Server]The certificate cannot be dropped because one or more entities are either signed or encrypted using it.. To continue, correct the problem, and then run SQL Server Setup again.
This installation does not have encryption enabled, so I do not undersand the error or how to correct it.
After rebooting the SQL instance appears to be upgraded to Enterprise, but it cannot be upgraded to SP2.
Thanks,
We downloaded and installed the trial software of SQL Server 2005 Enterprise edition a month ago. We have purchased a fully licensed version of SQL Server 2005 Standard Edition and would like to apply the licensed version to our workstation clients since their SQL software will eventually expire. Our SQL Server is not an issue since we purchased a new Server and installed the new licensed version of SQL on it.
Is there an easy way to accomplish this or is an uninstall & reinstall of SQL on every workstation required?
Thanks,
ChrisB
I recently bought a Dell server with Windows 2003 enterprise edition. I wanted the X32 version and metnioned of the same to the sales people, but somehow they put the x64 edition on the server. The database I am planning to use does not work on X64 edition as of now. How do I downgrade the OS to X32 version? Do I need to send the system back to Dell? Machine not opened yet. Or is there a way I can get software CD and downgrade to X32 version?
Thanks,
Prasad
I recently purchased a copy of Visual Studio 2005 Professional last month and it came with SQL Server Developer Edition. However, I noticed it also installs the express edition. If I choose not to install the Developer Edition (Im quite new to SQL) can I deploy a database I develop in the express edition on a regular SQL server?
Regards and thanks,
Matt
Hi,
I would like to find out if there is any way to upgrade SQL Server 2000 (Ent) to 2005 (STD)
The Instance has many logins and jobs etc and I dont want to loose those
A document or some advice on how to go about it would help
Thanks
I just received my licensed disks for upgrading my SQL Server 2005 Evaluation version to a fully licensed version. Do I simply run the two disks over top of the evaluation version or is it a little bit more complicated? Any input would be greatly appreciated. A little new to SQL.
Thanx
Chad