Hi all,
One of my columns is the table has some Null values, and I Would like to stop having NULL values into that column any more.
I know, If I alter the column to NOT NULL will throw me an error, since it does a batch update.
Is there any way to achieve this...
Thanks...
Hello DBAs:
I am having difficulty constructing a where clause. I have 4 columns in a table. Col1 is never NULL. Col2,3,4 may or may not contain NULL values. Here is the situation.
1. Col2,3,4 are NULL
WHERE Col1 = condition
2. Col2 is NULL, 3 may or may not be NULL. When Col3 is NOT NULL, Col4 may or may not be NULL
where col1 and (col3(Not Null values) OR Col4(Not Null values)) = condition.
How do I construct this logic. Please help
Hi I have a table, which contains Char and NChar NOT NULL columns
Now I need to change it to NULL, when I use the following command, it fails for the following error,
The command I used,
ALTER TABLE <TableName>
ALTER COLUMN <ColName> CHAR NULL
ALTER TABLE <TableName>
ALTER COLUMN <ColName> NCHAR NULL
Msg 8152, Level 16, State 13, Line 1
String or binary data would be truncated.
The statement has been terminated.
But for the same table, the below command executes fine,
ALTER TABLE <TableName>
ALTER COLUMN <ColName> SMALLINT NULL
Also I can change the NULLABILITY from NOTNULL to NULL using Enterprise Manger, editing the table using Table Design and selecting Allow Nulls option.
I need a script to accomplish this task.
Any help would be greatly appreciated.
-Senthil
Hey. I need to substitute a value from a table if the input var is null. This is fine if the value coming from table is not null. But, it the table value is also null, it doesn't work. The problem I'm getting is in the isnull line which is in Dark green color because @inFileVersion is set to null explicitly and when the isnull function evaluates, value returned from DR.FileVersion is also null which is correct. I want the null=null to return true which is why i set ansi_nulls off. But it doesn't return anything. And the select statement should return something but in my case it returns null. If I comment the isnull statements in the where clause, everything works fine. Please tell me what am I doing wrong. Is it possible to do this without setting the ansi_nulls to off??? Thank you
set ansi_nulls off
go
declare
@inFileName VARCHAR (100),
@inFileSize INT,
@Id int,
@inlanguageid INT,
@inFileVersion VARCHAR (100),
@ExeState int
set @inFileName = 'A0006337.EXE'
set @inFileSize = 28796
set @Id= 1
set @inlanguageid =null
set @inFileVersion =NULL
set @ExeState =0
select Dr.StateID from table1 dR
where
DR.[FileName] = @inFileName
AND DR.FileSize =@inFileSize
AND DR.FileVersion = isnull(@inFileVersion,DR.FileVersion)
AND DR.languageid = isnull(@inlanguageid,null)
AND DR.[ID]= @ID
)
go
set ansi_nulls on
I am getting this error: "Cannot insert the value NULL into column 'OrderID', table 'outman.outman.Contact'; column does not allow nulls. INSERT fails." -- But my value is not null. I did a response.write on it and it show the value. Of course, it would be nice if I could do a breakpoint but that doesn't seem to be working. I'll attach a couple of images below of my code, the error, and the breakpoint error.
Server Error in '/' Application.
Cannot insert the value NULL into column 'OrderID', table 'outman.outman.Contact'; column does not allow nulls. INSERT fails.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.SqlClient.SqlException: Cannot insert the value NULL into column 'OrderID', table 'outman.outman.Contact'; column does not allow nulls. INSERT fails.Source Error:
Line 89: sContact.Phone = sPhone.Text.Trim
Line 90: sContact.Email = sEmail.Text.Trim
Line 91: sContact.Save()
Line 92:
Line 93: Dim bContact As Contact = New Contact()Source File: F:InetpubwwwrootOutman KnifeCheckout.aspx.vb Line: 91 Stack Trace:
[SqlException (0x80131904): Cannot insert the value NULL into column 'OrderID', table 'outman.outman.Contact'; column does not allow nulls. INSERT fails.]
System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection) +857354
System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) +734966
System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) +188
System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj) +1838
System.Data.SqlClient.SqlDataReader.HasMoreRows() +150
System.Data.SqlClient.SqlDataReader.ReadInternal(Boolean setTimeout) +214
System.Data.SqlClient.SqlDataReader.Read() +9
System.Data.SqlClient.SqlCommand.CompleteExecuteScalar(SqlDataReader ds, Boolean returnSqlValue) +39
System.Data.SqlClient.SqlCommand.ExecuteScalar() +148
SubSonic.SqlDataProvider.ExecuteScalar(QueryCommand qry) +209
SubSonic.DataService.ExecuteScalar(QueryCommand cmd) +37
SubSonic.ActiveRecord`1.Save(String userName) +120
SubSonic.ActiveRecord`1.Save() +31
Checkout.btnCheckout_Click(Object sender, EventArgs e) in F:InetpubwwwrootOutman KnifeCheckout.aspx.vb:91
System.Web.UI.WebControls.Button.OnClick(EventArgs e) +105
System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument) +107
System.Web.UI.WebControls.Button.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument) +7
System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument) +11
System.Web.UI.Page.RaisePostBackEvent(NameValueCollection postData) +33
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +5102
Version Information: Microsoft .NET Framework Version:2.0.50727.42; ASP.NET Version:2.0.50727.42
It's giving me an error while I'm trying to change column value from not null to null..
'tblid' table
- Unable to modify table.
Cannot insert the value NULL into column 'ValidID', table 'Xe01.dbo.Tmp_tblid'; column does not allow nulls. INSERT fails.
The statement has been terminated.
Dear folks,
please tell me the query for altering a column from not null to null
Vinod
Hi all,
One of my columns is the table has some Null values, and I Would like to stop having NULL values into that column any more.
I know, If I alter the column to NOT NULL will throw me an error, since it does a batch update.
Is there any way to achieve this...
Thanks...
I have a field called Trainee1 and there are about 3 in every 10 records that the value is <NULL> - I want to change that value to 0.
I have tried to use this command but it changed EVERY record to <NULL>
update Trainee1 set RegId=replace(RegId,'NULL','0')
Has anyone any suggestions on how to just change the records where the value of traineeId is <NULL>???
Thanks in advance,
Anthony
Aim- the following columns “Cancel_Date”, “First_Post_Date”,“Last_Post_Date” can either be populated with figures or have a null value.
I want all Null values to be removed and be replaced with a blank
Final table is
Select *
from #test
left join #SF_AccountBuild on #test.FDMSAccountNo = #SF_AccountBuild.[External FDMSaccountno]
Results
[FDMSAccountNo],
External_ID ,
Parentsfid,
[DBA Name],
[Legal Name],
Street,
[MM3-DBA-ADDR2],
[Code] .....
I can't figure this one out...
I have an Excel spreadsheet (Excel 2003 format) with a column of values. The column is formated to General (although I've tried it formated to text). The values are alphanumeric. However, there are a few values that are completely numeric.
Example:
_ITEMNUMBER_
1-528
K214-5
184PR
45678
As can be seen, the last value is completely numeric. I am importing into a table with one column that is formated as nvarchar(50).
I use dtswizard.exe and do a simple import into the table and the alphanumeric values import just fine but anytime a value is completely numeric it has a NULL value in the table instead of the value that should be there.
I've tried changing the format of the column to nchar, char, etc, etc. Always comes in NULL.
Any ideas?
In my report i have CNAME parameter , which allows null value. I checked Allow null value check box in report parameter properties.
when i preview the report , it displays checked NULL check box beside CNAME parameter . I want to give some meaningful name(i.e.ALLCustomers) to this checkbox instead of NULL.
Is it possible through SSRS designer?
I have a flat file with the following columns
SampleID Rep_Number Product Protein Fat Solids
In the flat file SampleID and Product are populated in the first row only, rest of the rows only have values for Rep_Number, Protein, Fat, Solids.
SampleID and Product are blank for the rest of the rows. So my task is to fill those blank rows with the first row that has the sampleID and Product and load into the table.
I have a report that is run on a monthly basis with a default date of null. The stored procedure determines the month-end date that it should use should it be sent a null date.
The report works fine when I tell it to create a history entry; however, when I try to add a subscription it doesn't appear to like the null parameter value. Since I have told the report to have a default value of null it doesn't allow me to enter a value on the subscription page.
Now, I suppose I could remove the parameter altogether from the stored proc, but then the users would never be able to run the report for a previous time period. Can someone explain to me why default values aren't allowed to be used on subscriptions when they seem to work fine for ad hoc and scheduled reports? This is really quite frustrating as most of my reports require a date value and default to null so that the user doesn't have to enter them for the latest data.
An internal error occurred on the report server. See the error log for more details. (rsInternalError) Get Online Help
Key cannot be null. Parameter name: key
I run a stored procedure for which I have a return variable. The stored procedure returns the ID of a row in a table if it exists:
m_sqlCmd.ExecuteScalar();
The m_sqlCmd has been fed an SQLParameter with direction set to output.
When the stored proc returns, I want to test it. Now when there IS a row it returns the ID ok.
When the row doesn't exist, in my watch I have:
m_sqlParam.SqlValue with value {Null}
I can't seem to work out how to test this value out.
I've tried several things but none seem to work.
This line compiles ok, but the following runs into the IF statement as if the SqlValue is null??
if (m_sqlParam.SqlValue != null)....
{
// I'm here!! I thought the watch says this is null???
}
Sorry if this is obvious, but I can't work this one out!!
Looks like there was a fix and then I read this fix is not a fix. Does anyone know how this can be rectified? Does it mean that only Windows authentiation is the only way it works. The Software is over 2 years old, there are no excuses.
I would drop and add the table but the data can't be deleted. So if anyone could help with the statement it would be greatly appreciated. Thanks
View 7 Replies View RelatedI'm trying to set the concat... option to OFF
all the time and in all my databases
I tried this command
USE master
EXEC sp_dboption 'DatabaseName', 'concat null yields null', 'FALSE'
but it doesn't change anything
Select NULL + 'TOTO'
----> NULL
(it should be 'TOTO')
hi,my structure table in database:Amount float(53) not null default 0when i try to run his script:alter table ABC alter column Amount float(53) nullit can only set the Amount to allow null, but can't set the defaultvalue to empty.anyone know how to set the field to allow null and default set toempty, no value.thanks
View 5 Replies View RelatedHello.
I've built a sample CLR function with the following declaration....
CREATE FUNCTION GetManager(@DeptCode nvarchar(3))
RETURNS nvarchar(1000)
WITH RETURNS NULL ON NULL INPUT
AS
EXTERNAL NAME Assembly1.[ClassLibrary1.MyVBClass].MyManager
And it works as expected, except when I use NULL:
DECLARE @MyManager nvarchar(1000)
EXEC @MyManager = dbo.GetManager NULL
PRINT @MyManager
It returns the value "Unknown" as it would have for any unknown DeptCode, as-programmed.
I'm of the theory it should have returned NULL without actually firing the function? Or is this only for non-CLR items... or stored procedures, not functions?
We have a case where in we should show date based on conditions for e.g if we had a column defined as
col varchar(10) then we would show col as 'NULL' for some condition and actual value when no condition
Normaly date values are stored here e.g under col 20150901 .
Case
when col>'20150901' then 'NULL'
else col
end as Derivedcol
Note this is an extract process and we are presenting data by pumping the data in a table .
Now there is another similar column -colz varchar(10) which stores date but doesnt have case condition so whenever date has no value its shows null which is database null.
So whats the difference between database null and string null ?
How can we show database null for the case condition instead of string "null"?
We have a database where many tables have a field that has to be lengthened. In some cases this is a primary key or part of a primary key. The table in question is:-
/****** Object: Table [dbo].[DTb_HWSQueueMonthEnd] Script Date: 09/25/2014 14:05:09 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
SET ANSI_PADDING ON
GO
CREATE TABLE [dbo].[DTb_HWSQueueMonthEnd](
[Code] ....
The script I am using is
DECLARE@Column varchar(100)--The name of the column to change
DECLARE@size varchar(5)--The new size of the column
DECLARE @TSQL varchar(255)--Contains the code to be executed
DECLARE @Object varchar(50)--Holds the name of the table
DECLARE @dropc varchar(255)-- Drop constraint script
[Code] ....
When I the the script I get the error message Could not create constraint. See previous errors.
Looking at the strings I build
ALTER TABLE [dbo].[DTb_HWSQueueMonthEnd] DROP CONSTRAINT PK_DTb_HWSQueueMonthEnd
ALTER TABLE [dbo].[DTb_HWSQueueMonthEnd] Alter Column [Patient System Number] varchar(10)
ALTER TABLE [dbo].[DTb_HWSQueueMonthEnd] ADD CONSTRAINT PK_DTb_HWSQueueMonthEnd PRIMARY KEY NONCLUSTERED ([Patient System Number] ASC,[Episode Number] ASC,[CensusDate] ASC)
WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, SORT_IN_TEMPDB = OFF, IGNORE_DUP_KEY = OFF, ONLINE = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
They all seem fine except the last one which returns the error
Msg 8111, Level 16, State 1, Line 1
Cannot define PRIMARY KEY constraint on nullable column in table 'DTb_HWSQueueMonthEnd'.
Msg 1750, Level 16, State 0, Line 1
Could not create constraint. See previous errors.
None of the fields I try to create the key on are nullable.
I receive this message when I try to run any report. The reportserver and reportservertempdb databases were upgraded using backup/restore from SQL2000 to SQL2005 on a separate server which is running RS2005 . Please help. Thanks
View 1 Replies View RelatedI want to modify this column:
codkey int NULL
to:
codkey int NOT NULL
How can I do that in SQL Server?
I think it must be very simple
Hi.I've read up on this, and have something that works, but I was wondering ifthere is anything I'm overlooking with this.Situation is:I have a bunch of tables.. I need to modify table2 as part of an upgrade of adatabase schema.I am using T-SQL scripts to do the trick which I'm writing myself.I need to add a new varchar(8) column that is not null to the primary key.I have a default I would like to use for the initial ddl modification.I want to get rid of the default after the modification is complete, but leavethe column not null for future operations...(Some if the code I'm using I took from one of Erlands posts.. hope I'm notabusing it).Here is the code I'm using now.. it basically adds the column 'institution_id'as not null along with a default.Then I jump through a couple of hoops trying to get rid of the default.Finally I setup the primary key again.I can only feel I'm supposed to be maybe using a constraint column with a nameto do this easier/more properly.set @dynamicsql = ' alter table institution_xref add institution_idvarchar(60) not null default ''' + @default_institution_id + ''' 'EXEC (@dynamicsql)set @dynamicsql = ' alter table institution_xref alter columninstitution_id varchar(60) not null 'EXEC (@dynamicsql)select @institution_iddefault = object_name(cdefault) from syscolumnswhere id = object_id('institution_xref') and name = 'institution_id'exec(' alter table institution_xref drop constraint ' +@institution_iddefault)set @dynamicsql = ' alter table institution_xref drop constraintinstitution_xref_pk 'EXEC (@dynamicsql)set @dynamicsql = ' alter table institution_xref with nocheck addconstraint institution_xref_pk primary key clustered (originalcode,institution_id) 'EXEC (@dynamicsql)thanksJeffJeff Kish
View 2 Replies View Related
Hi,
I have a question whether set the default of column to null or non-null value as it is not easy to make a WHERE clause if the column is nullable.
Any suggestion?
It is issues like this that drive a programmer insane! I am trying to figure out if I am missing something here.
I have a query like this:
SELECT CL.DivisionId FROM CompanyLabels CL, BusinessRules B WHERE CL.CompanyLabelId = B.CompanyLabelId
In my table, DivisionId is nullable and equal to NULL.
In my VS.2005 Mobile 5 application, this line is giving me fits:
if (dr["DivisionId"] != null) { MessageBox.Show(dr["DivisionId"].ToString().Length.ToString()); divisionId = Convert.ToInt32(dr["DivisionId"].ToString()); }
DivisionId passes the null check and is blank. The message box returns "0" and of course, I get a FormatError on the conversion.
I have also tried DBNull in place of null. Is there a special System.Data.SqlServerCe NULL value in the SQL CE framework that I should be using? Am I completely forgetting something here?
Thanks!
Michael
I have two columns A (which allows nulls) and B( which does not allow nulls).
How can I add the contents of columns A and B SO THAT I DO NOT GET A NULL RESULT WHEN A IS NULL.
The result of A+B concatanation will be stored in a column, C.
Appreciate your help
Ziggy
Hi guys,
I've got a query on a particular table returning an odd result:
SELECT DISTINCT WorkStation
FROM Invoice
WHERE WorkStation Is Not Null
ORDER BY WorkStation
This query returns the rows I'd expect plus a null row. This doesn't happen in databases at other sites, or in other tables at this site. The following query behaves as I'd expect returning only non-null AccountNumbers.
SELECT DISTINCT AccountNumber
FROM Suppliers
WHERE AccountNumber Is Not Null
ORDER BY AccountNumber
I can't reproduce these results on another site on a table of the same structure, or on another table at this site.
Any suggestions as to what might be going on?
Pertinent info:
---
select @@Version
Microsoft SQL Server 2000 - 8.00.760 (Intel X86)
Dec 17 2002 14:22:05 Copyright (c) 1988-2003 Microsoft Corporation
Standard Edition on Windows NT 5.2 (Build 3790: Service Pack 1)
---
dbcc checkdb
Abridged result:
CHECKDB found 0 allocation errors and 0 consistency errors in database 'POS'.
---
SELECT * INTO #Inv FROM Invoice
SELECT DISTINCT WorkStation
FROM #Inv
WHERE WorkStation Is Not Null
ORDER BY WorkStation
Does not reproduce this problem (and so is a probable fix) but the questions remains, what causes this?
TIA,
Karl.
I have 595 default constraints in my database. I can return a list of them using the following:
select * from sys.default_constraints
Is there a way I can return a list of just the ones where NULL is still allowed? I want to update all of the columns with a default value to not allow NULLs.
ok here is a WIERD issue.
I've NEVER EVER had this issue, I have always done this and it works great both locally and remotely.
I have a table, which is a "customers" table.
I have a stored procedure which takes in parameters (name, address, password etc...) and returns me back, via a parameter declared as output - the customer ID.
I've always done this, and works great.
Now, this works fine locally.
IF I try to run this/do the exact same execution of commands (create a customer) remotely (where the database is stored, so copying everything from local to "over there") it does not work.
I get a DBNULL value back from the parameter, declared as an int output.
IF I copy and paste this Stored procedure Query/command into Query Analyzer and execute it (on the remote connection) and run it, giving it the exact same values as I do, it works perfect and returns me the correct value.
I've even dropped and recreated the stored procedure but makes no difference.
Any ideas why?
here is the proc....
CREATE PROCEDURE [dbo].[DoCreateNewCustomer] (
@theFirstName nvarchar(25),
@theLastName nvarchar(25),
@theAddress nvarchar(50),
@theCity nvarchar(15),
@thePostCode nvarchar(9),
@thePhoneNumber nvarchar(21),
@theMobilePhoneNumber nvarchar(21),
@theIPAddress nvarchar(25),
@thePassword nvarchar(50),
@theEmailAddress nvarchar(30),
@result int output
)
AS
SET @result = (SELECT [ID] FROM Customers WHERE emailAddress = @theEmailAddress)
IF @result IS NOT NULL
SET @result = -1
ELSE
BEGIN
SET @result = @@IDENTITY
INSERT INTO Customers (
Firstname,
Lastname,
Address,
City,
Postcode,
PhoneNumber,
MobileNumber,
IPAddress,
[Password],
EmailAddress
)
VALUES (
@theFirstName,
@theLastName,
@theAddress,
@theCity,
@thePostCode,
@thePhoneNumber,
@theMobilePhoneNumber,
@theIPAddress,
@thePassword,
@theEmailAddress
)
END
GO
Any ideas why it does not work when calling the stored proc from either a web app, or through QA remotely but works fine when I run that command in QA or locally?
Again, if I do:
EXEC DoCreateNewCustomer { params } - the output result it gives me is DBNULL (if on remote connection)
If I do this locally, perfect
If I copy and paste pretty much the SP into QA and execute it on the remote connection, works great, and also locally.
I am trying to create a drop down list with the possible usernames that you can send an email to. Everything works fine except for the dropdown list and I get the following error message:Cannot insert the value NULL into column 'EmailTo', table 'db191165913.dbo191165913.Email'; column does not allow nulls. INSERT fails.The statement has been terminatedMy code is below:<%@ Page Language="VB" MasterPageFile="~/real_world/realworld_MasterPage.master" AutoEventWireup="false" CodeFile="send_messages.aspx.vb" Inherits="send_messages" title="Untitled Page" %><asp:Content ID="Content1" ContentPlaceHolderID="ContentPlaceHolder1" Runat="Server"> <asp:Label ID="email_label" runat="server" Visible="False"></asp:Label> <asp:SqlDataSource ID="emailsend_source" runat="server" ConnectionString="<%$ ConnectionStrings:IMS_DB %>" DeleteCommand="DELETE FROM WHERE [EmailID] = @EmailID" InsertCommand="INSERT INTO ([UserID], [EmailTo], [EmailFrom], [Subject], [Message], [Status], [Reply], [Forward], [UserName], [SentOn], [IP], [BrowserInfo], [DNSInfo]) VALUES (@UserID, @EmailTo, @EmailFrom, @Subject, @Message, '@Status', '@Reply', '@Forward', @UserName, @SentOn, @IP, @BrowserInfo, @DNSInfo)" SelectCommand="SELECT * FROM WHERE ([UserID] = @UserID)" UpdateCommand="UPDATE SET [UserID] = @UserID, [EmailTo] = @EmailTo, [EmailFrom] = @EmailFrom, [Subject] = @Subject, [Message] = @Message, [Status] = @Status, [Reply] = @Reply, [Forward] = @Forward, [UserName] = @UserName, [BrowserInfo] = @BrowserInfo, [DNSInfo] = @DNSInfo WHERE [EmailID] = @EmailID"> <DeleteParameters> <asp:Parameter Name="EmailID" Type="Int32" /> </DeleteParameters> <UpdateParameters> <asp:Parameter Name="UserID" /> <asp:Parameter Name="EmailTo" Type="String" /> <asp:Parameter Name="EmailFrom" Type="String" /> <asp:Parameter Name="Subject" Type="String" /> <asp:Parameter Name="Message" Type="String" /> <asp:Parameter Name="Status" Type="String" /> <asp:Parameter Name="Reply" Type="String" /> <asp:Parameter Name="Forward" Type="String" /> <asp:Parameter Name="UserName" Type="String" /> <asp:Parameter Name="BrowserInfo" Type="String" /> </UpdateParameters> <SelectParameters> <asp:ControlParameter ControlID="email_label" Name="UserID" PropertyName="Text" /> </SelectParameters> <InsertParameters> <asp:Parameter Name="UserID" /> <asp:Parameter Name="EmailTo" Type="String" /> <asp:Parameter Name="EmailFrom" Type="String" /> <asp:Parameter Name="Subject" Type="String" /> <asp:Parameter Name="Message" Type="String" /> <asp:Parameter Name="Status" Type="String" /> <asp:Parameter Name="Reply" Type="String" /> <asp:Parameter Name="Forward" Type="String" /> <asp:Parameter Name="UserName" Type="String" /> <asp:Parameter Name="IP" Type="String" /> <asp:Parameter Name="SentOn" Type="datetime" /> <asp:Parameter Name="BrowserInfo" Type="String" /> <asp:Parameter Name="DNSInfo" Type="String" /> </InsertParameters> </asp:SqlDataSource> <asp:SqlDataSource ID="username_email" runat="server" ConnectionString="<%$ ConnectionStrings:IMS_DB %>" SelectCommand="SELECT [UserName] FROM [Membership] ORDER BY [UserName]"> </asp:SqlDataSource> <asp:ValidationSummary ID="ValidationSummary1" runat="server" HeaderText="You must fill out the following forms:" ValidationGroup="email_send" /> <asp:DetailsView ID="DetailsView1" runat="server" AutoGenerateRows="False" DataKeyNames="EmailID" DataSourceID="emailsend_source" DefaultMode="Insert" GridLines="None" Height="50px" Width="125px"> <Fields> <asp:BoundField DataField="EmailID" HeaderText="EmailID" InsertVisible="False" ReadOnly="True" SortExpression="EmailID" /> <asp:TemplateField HeaderText="To" SortExpression="EmailTo"> <EditItemTemplate> <asp:TextBox ID="TextBox1" runat="server" Text='<%# Bind("EmailTo") %>'></asp:TextBox> </EditItemTemplate> <InsertItemTemplate> <asp:DropDownList ID="DropDownList1" runat="server" DataSourceID="emailsend_source" DataTextField="UserName" SelectedValue='<%# Bind("UserName") %>' AppendDataBoundItems="True" DataValueField="UserName"> <asp:ListItem>-- Receiving User --</asp:ListItem> </asp:DropDownList> <asp:RequiredFieldValidator ID="RequiredFieldValidator1" runat="server" ControlToValidate="DropDownList1" Display="Dynamic" ErrorMessage="Message Receiver (To)" ValidationGroup="email_send"></asp:RequiredFieldValidator> </InsertItemTemplate> <ItemTemplate> <asp:Label ID="Label1" runat="server" Text='<%# Bind("EmailTo") %>'></asp:Label> </ItemTemplate> </asp:TemplateField> <asp:TemplateField HeaderText="From" SortExpression="EmailFrom"> <EditItemTemplate> <asp:TextBox ID="TextBox2" runat="server" Text='<%# Bind("EmailFrom") %>'></asp:TextBox> </EditItemTemplate> <InsertItemTemplate> <asp:LoginName ID="login_name" runat="server" /> </InsertItemTemplate> <ItemTemplate> <asp:Label ID="Label2" runat="server" Text='<%# Bind("EmailFrom") %>'></asp:Label> </ItemTemplate> </asp:TemplateField> <asp:TemplateField HeaderText="Subject" SortExpression="Subject"> <EditItemTemplate> <asp:TextBox ID="TextBox3" runat="server" Text='<%# Bind("Subject") %>'></asp:TextBox> </EditItemTemplate> <InsertItemTemplate> <asp:TextBox ID="TextBox3" runat="server" MaxLength="50" Text='<%# Bind("Subject") %>' ValidationGroup="send_email"></asp:TextBox> <asp:RequiredFieldValidator ID="RequiredFieldValidator2" runat="server" ControlToValidate="TextBox3" Display="Dynamic" ErrorMessage="Subject" ValidationGroup="email_send"></asp:RequiredFieldValidator> </InsertItemTemplate> <ItemTemplate> <asp:Label ID="Label3" runat="server" Text='<%# Bind("Subject") %>'></asp:Label> </ItemTemplate> </asp:TemplateField> <asp:TemplateField HeaderText="Message" SortExpression="Message"> <EditItemTemplate> <asp:TextBox ID="TextBox4" runat="server" Text='<%# Bind("Message") %>'></asp:TextBox> </EditItemTemplate> <InsertItemTemplate> <asp:TextBox ID="TextBox4" runat="server" Columns="40" MaxLength="500" Rows="10" Text='<%# Bind("Message") %>' TextMode="MultiLine" ValidationGroup="send_mail"></asp:TextBox> <asp:RequiredFieldValidator ID="RequiredFieldValidator3" runat="server" ControlToValidate="TextBox4" Display="Dynamic" ErrorMessage="Message" ValidationGroup="email_send"></asp:RequiredFieldValidator> </InsertItemTemplate> <ItemTemplate> <asp:Label ID="Label4" runat="server" Text='<%# Bind("Message") %>'></asp:Label> </ItemTemplate> </asp:TemplateField> <asp:CommandField InsertText="Send Message" ShowInsertButton="True" ValidationGroup="email_send" /> </Fields> </asp:DetailsView></asp:Content>
View 2 Replies View RelatedHi i get the above error whenever i try and run my page, what i am trying to do is embed a repeater within a datalist, here is my code;public void Page_Load(object sender, EventArgs e)
{string strID = Request.QueryString["id"];
SqlConnection conn = new SqlConnection(ConfigurationManager.ConnectionStrings["streamConnectionString"].ConnectionString);SqlCommand command = new SqlCommand("stream_Users", conn);
command.CommandType = CommandType.StoredProcedure;command.Parameters.Add("@userID", SqlDbType.Int).Value = Request.QueryString["id"];
SqlDataAdapter cmd1 = new SqlDataAdapter(command);
//Create and fill the DataSet.DataSet ds = new DataSet();
cmd1.Fill(ds, "userName");
//Create a second DataAdapter for the Titles table.SqlDataAdapter cmd2 = new SqlDataAdapter("select * from UserSpecialties", conn);
cmd2.Fill(ds, "specialty");
//Create the relation bewtween the Authors and Titles tables.ds.Relations.Add("myrelation",
ds.Tables["userName"].Columns["userID"],ds.Tables["specialtyName"].Columns["userID"]);
//Bind the Authors table to the parent Repeater control, and call DataBind.DataList1.DataSource = ds.Tables["userName"];
Page.DataBind();
//Close the connection.
conn.Close();
}