Changing To Design View Of A Reporting Services Report File
Nov 13, 2007
When I am working on an Integrations Services project and I open a Reporting Services file, it displays it in the Code view. Is there a way to display it in the Design view? Or do I have to close the project and open up a Reporting Services project?
Fred
View 1 Replies
ADVERTISEMENT
Apr 24, 2015
On our project we export SSRS reports to Excel. Report Definition Language (RDL) enables you to use several measurement units (for example, inches, pixels, centimeters, and points) to specify position and size values. However, Excel uses only points. Therefore, the SSRS Excel rendering extension converts the height and width of the table, the heights of the rows, and the widths of the columns to points.
This process may include rounding some values. In this situation, the table height or width and the sum of the row heights or column widths are different. To compensate for the difference, the SSRS Excel rendering extension inserts a small row or column to the workbook.
To prevent that ‘hidden’ row or column, we configure the table height and width to a value specified in "pt" (points) rather than "cm". 1 cm is about 28 points. Is it possible to configure SSRS to use points by default while designing a report?
View 2 Replies
View Related
Mar 6, 2008
How can i write diffrent Queries in Data set using If...Else Conditions at the time of report Design.
Regards.
View 9 Replies
View Related
Nov 6, 2015
I have a report that I need to develop in landscape format. Also I need it to be landscape when converting to PDF and taking printouts. let me know the exact height and width measurements in inches for the report and report body?
I need the margin to be 0.5 inch.Â
View 4 Replies
View Related
Sep 2, 2015
Currently have a single hard coded file path to the SSRS config file which parses the file and provides the reporting services web service url. Â My question is how would i run this same query against 100s of servers that may or may not share the same file path as the one hard coded ?
Is there a way to query the registry to find the location of the config file of any server ? which could be on D, E, F, H, etc.Â
I know I can string together the address followed by "reports" and named instance if needed, but some instances may not have used the default virtual directory name (Reports).
Am I going about this the hard way ? Is there a location where the web service url exists in a table ? I could not locate anything in the Reporting service database. Basically need to inventory all of my reporting services url's.
View 2 Replies
View Related
Jun 29, 2015
I want to be able to open URLs in a new window in my SSRS report, and the URLs keep changing in every record. The problem is these links are not the only things present in the record, and there is other data present. I keep seeing examples where they are considering only a link to be present in the record with no other data.
Also the data in the record includes HTML tags and I checked the option that says "HTML - Interpret HTML tags as styles" on the placeholder properties window.
Example of data in the record:
Hello! Welcome to google, the most used search engine.
Click on www.google.com to go the website
So when I click on the www.google.com URL, it should open in a new window.Â
View 2 Replies
View Related
May 18, 2012
I have a very frustrating problem. But given that this is a development forum, I'll keep that for my 'Envelope Lickers Rehab' and instead talk about an issue I'm having.
I have a very large query (line-wise) that executes in less than a minute when run from the SQL Management Studio as well as via Excel Services.Â
It is a stored procedure with one parameter. When I try to prime the designer with this query it gives me the following message:
"Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
The statement has been terminated."
I've considered cracking open the xml source and manually creating the fields, but I'd rather not go there.
View 8 Replies
View Related
Mar 22, 2009
Is Format Painter is available in SQL Server Management Studio Report Design?If not, any other way can we copy format?
View 4 Replies
View Related
May 19, 2015
How do I design reports so they look good when viewed online?
Is there anyway for it to render nicely on a particular resolution or screen? Never done any web dev, so not sure if I am missing something.
At the moment I am just designing the report so it looks right on my box.
However by trying to maximise the space when viewed online, it means exporting to pdf ends up being a disaster.
View 3 Replies
View Related
May 13, 2015
In Report Builder 1.0 you could drag a column to a filter and see the data before select the values for the filter.I can't find a way to do that in report builder 3.0. is it possible to see the data of a column in Report builder or SSRS?
View 3 Replies
View Related
May 18, 2015
I have a couple of Power View reports that I cannot enable the data refresh schedule for. I cannot pinpoint what caused the schedule to stop working but the scheduled data refresh for these reports used to work and now they don't. Every time I try to enable a schedule the page submits and it seems like everything worked (no errors). However, when I go back to the schedule page for the report the Enable checkbox is unchecked. There are other Power View reports that are scheduled and running just fine. The only error I can track down in the SharePoint logs is this:
Failed to remove workbook tracking handle from collection for workbook
I've tried making a copy of the file and re-uploading with a different name but nothing changes. The user would really rather not recreate the report from scratch.
View 4 Replies
View Related
Sep 14, 2015
Is there a way to make the View Report disabled or enabled if certain condition exists?
View 3 Replies
View Related
Jul 9, 2015
I added the row group to show up as the tree view in the left side of the report. But I need it to display the records in the report detail for just that group value for the records when I clicked the group value from the tree view list.
Currently, it‘s not doing that. It takes me to that page where the group value is listed but it lists all other records too (which I don't want).
View 4 Replies
View Related
Jan 3, 2008
Has anyone encounted a problem with Reporting Services (2005) with the following scenario:
A report with a dropdown parameter allowing a Select All choice -
If the selection list is fairly long and Select All is selected - if the user clicks the View Report button the selection list is completely reset (i.e. all items are unselected). This seems to happen if the user quickly clicks the View Report button immediately after clicking the Select All box on the parameter dropdown.
This happens inconsistently - some users experience it frequently while others do not see it at all (using the same parameter values, etc.)
View 1 Replies
View Related
Feb 3, 2015
I'm trying to use SQL Server Reporting Services (SQL Server 2008 R2) to produce a CSV file. Â Row 1 in the CSV has to be a summary row with 8 columns. Â The detail rows which follow have 24 columns. Â The data in the summary row is "static" except for a date, a count of detail rows, and a total amount due based on the detail rows that follow. Â Here's an example of what we need it to look like:
HDR,4242,0,1,20150203,25,I,25823.18,,,,,,,,,,,,,,,,
DTL,4242,0,1,20150203,255092,20150129,989,C,Net 0,Due Upon Receipt,12703,Some Super Customer,1001 Grandview Dr,,SomeCity,TX,US,75012,9729990000,,,,
DTL,4242,0,1,20150203,255093,20150129,1360,C,Net 0,Due Upon Receipt,23774,Another Awesome Customer,52 Six Flags Dr,,DeepInTheHeart,TX,US,76006,8174445555,,,,
I've been able to get the report itself to render correctly in Visual Studio or from a browser using several different approaches but they all fail in one way or another when I try to save it as a CSV (eg, a header is prepended to each detail so they end up side by side, header and detail end up with extra columns, etc).
View 11 Replies
View Related
Jul 9, 2013
I am creating a SSRS report which would be executed by User manually through ReportServer URL.User would be generating the SSRS report for different Customer ID based on ad-hoc basis.
I am passing CustomerID as input parameter to the report. Is there any way to get the manually generated SSRS report name as 'Report_CustomerID_TodayDate.xls'.
E.g.If User is generating report for Customer ID 123 today then report name should be 'Report_123_07092013.xls'
View 2 Replies
View Related
Dec 29, 2007
I tried to export a reort using SQL 2005 Reporting Services. However Iam getting the following log on the screen :
[logs After upgrading the SQL 2005 with SP2 ]
Execution 'ssem4cntbzve525531im5aup' cannot be found (rsExecutionNotFound)
Description: An unhandled exception occurred during the execution of the
current web request. Please review the stack trace for more information about
the error and where it originated in the code.
Exception Details: Microsoft.Reporting.WebForms.ReportServerException:
Execution 'ssem4cntbzve525531im5aup' cannot be found (rsExecutionNotFound)
Source Error:
An unhandled exception was generated during the execution of the current web
request. Information regarding the origin and location of the exception can
be identified using the exception stack trace below.
Stack Trace:
[ReportServerException: Execution 'ssem4cntbzve525531im5aup' cannot be found (rsExecutionNotFound)]
Microsoft.Reporting.WebForms.ServerReport.GetExecutionInfo() +286
Microsoft.Reporting.WebForms.ServerReport.SetExecutionId(String executionId, Boolean fullReportLoad) +109
Microsoft.Reporting.WebForms.ServerReport.LoadFromUrlQuery(NameValueCollection requestParameters, Boolean fullReportLoad) +90
Microsoft.Reporting.WebForms.ReportDataOperation..ctor() +326
Microsoft.Reporting.WebForms.HttpHandler.GetHandler() +194
Microsoft.Reporting.WebForms.HttpHandler.ProcessRequest(HttpContext context) +44
System.Web.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() +303
System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) +64
Can any one help me on this issue ?
Regards,
Nik
View 5 Replies
View Related
Apr 22, 2015
Is it possible to create a Data Driven Subscription report as a text file output to a shared folder?
View 6 Replies
View Related
Nov 2, 2013
I'm working on a report to show financial transactions from a table over a certain period. For most transactions there is a PDF document that is stored in a separate table in a binairy format. In my report I would like to include a link on every line with transaction information in the report that opens the PDF that is linked to that transaction. Just to be clear, I don't want to embed the PDF in the report but I want the users of the report to have the option to view the PDF that is related to that transaction in their standard pdf reader (adobe).
Code to do the following:
Once a user clicks on the link to view the PDF I need the code to get the binairy data of the PDF file from the table, convert it back to a PDF and open it in the default pdf reader (for example adobe reader). If it can't directly open the file then it's maybe possible to activate the 'open or download' pop up that you also get when you download something from a website.Â
View 4 Replies
View Related
May 7, 2008
Is there a way to change the main reporting services looks. For example, can i change the font? Can I add a logo? Change the color?
View 1 Replies
View Related
Sep 27, 2007
Hi,
I am formatting a currency field within reporting services using an expression. However i get the $ sign. I need the £ sign. How can i change this?
Thanks
David
View 1 Replies
View Related
Apr 24, 2015
I am trying to configure the reporting for TFS using SQL Server. But I get following error when viewing any report:
So I try to manually process the cube to check if it works. I am following this article:Â [URL] ....
When I click on GetProcessingStatus and invoke it (with last field set as TRUE) I get following error:
How to resolve this issue and be able to see the reports.
View 5 Replies
View Related
Dec 19, 2007
Hi everyone!
I have a problem regarding the generation of report using SSRS (SQL Server Reporting Services). As I've read from other forums, the said service need access to the Windows temp folder, which by default, is found in C:WINDOWSTemp. The said path is found in either the TMP or the TEMP environment variable.This means that there should be sufficient access to this folder, in order for SSRS to properly generate the report. The problem is that my client, for security reasons, does not want to grant special rights to this folder, using the ASP.NET account. Is there any way that we can change location of the temporary folder being used by SSRS without having to change the value of the TMP and TEMP environment variables? thanks in advance
View 1 Replies
View Related
Nov 5, 2015
Fields!TaskStartDate.Value & Â Fields!TaskName.Value & Fields!StatusForExecutiveReporting.Value & Fields!NotesForExecutiveReport.Value
This is my expression in a cell.when i run my report  task start date value is something like the:
01/25/2015 8:00:00AM.
I want this date to be in this form: jan 2015
View 3 Replies
View Related
Apr 27, 2007
Hi all
sorry im new with using Reporting Services and even more inexperienced with using cubes.
My situation is as follows. I perform dynamic grouping (user selects the view via a parameter) Depending on the view selected, I need to change the dimension filter in the dataset.. Is this possible ?
Regards,
Neil
View 5 Replies
View Related
Apr 26, 2007
I am new to Reporting Services, and I would like to serve up SQL 2005 Reporting Services reports via an ASP.NET web app (possibly using Report Viewer controls in Server mode). The web app will be running on an IIS server outside the firewall.
I would prefer to have the Reporting Services server be inaccessible outside the firewall, but it seems that the client browsers need direct URL access to the Reporting Services server. I guess this means either locating the Reporting Services server outside the firewall, or opening a hole in the firewall for access to the Reporting Services server.
Is there a Microsoft best-practice methodology/white-paper that addresses this scenario (especially as regards security concerns)?
Alternately, would it be possible, and would the same report presentation functionality be available (reports with expanding/collapsing sections, choice of export formats, etc), by calling the Reporting Services web service directly from the ASP.NET app, and manually populating the Response object?
Thanks. Any help would be appreciated.
View 3 Replies
View Related
May 20, 2015
when I try to open the SSRS in BIDS ( VS 2008), it is displaying the code portion alone. If i click 'View Designer', it prompts me like "....already opened. Do you want to close?" Only XML content of report is displaying. if I click 'Viee Code' then it displays error like "There is no editor available for 'c: eport Sample. rdl'.Make sure the application for the file type (.rdl) is installed."how to correct this issue by installing or by upgrading?
View 6 Replies
View Related
Jun 15, 2015
I am looking command (cmd/powershell/c#) for setting/updating credential for SSRS data source.
View 2 Replies
View Related
Sep 9, 2015
I just created a report builder. I have a main report and i wanted to create a sub report. why i cant or i cant view the path or the folder of my .rdl file to be use as my sub report.
View 5 Replies
View Related
Nov 6, 2007
I've SQL Server Reporting Services 2005 configured on my system, but now I'm NOT Able to start the report server. I get this error on http://<serverurl>/Reports/Home.aspx:
The report server cannot decrypt the symmetric key used to access sensitive or encrypted data in a report server database. You must either restore a backup key or delete all encrypted content. Check the documentation for more information. (rsReportServerDisabled) (rsRPCError) Get Online Help
The report server cannot decrypt the symmetric key used to access sensitive or encrypted data in a report server database. You must either restore a backup key or delete all encrypted content. Check the documentation for more information. (rsReportServerDisabled)
Key not valid for use in specified state. (Exception from HRESULT: 0x8009000B)
I don't want to loose any data. Please help me resolving this error.
FYI, I've modified the SQL Reporting Services account LogOnAs info, in Properties of "SQL Server Reporting Services (MSSQLSERVER)" Service, in Windows Service Managment.
Earlier I had .useraccount as username, I modified it to domainnameuseraccount. And then suddenlt everything broke for reporting server.
View 4 Replies
View Related
Mar 12, 2007
Hi There,
Our DBA has installed reporting services on a server and now in order to access the report manager, one has to be an Admin on that Server. I am guessing that there is a mistake in the configuration of Reporting Services. Usually it should allow anybody who was added to the roles in the properties section of the Report Manager, right? I have also added the users to the DB..
Also I am using Windows Authentication to access Report Catalog items (Reporting Services is installed on Server2) from a web Application(deployed on Server1) and displaying the report using report viewer. For some reason, server1 has to be in an Admin role on Server2 to access the report catalog/report. This is kinda strange for me as I don't want everybody to be an Admin on Server2. Can anybody please point in the right direction?
Thanks.
View 3 Replies
View Related
Nov 3, 2015
Is there any way to get the report toolbar using SOAP Api  in SSRS reporting.
View 6 Replies
View Related
Nov 3, 2015
When  I click on the DataSet Query Desginer there is an Error Source:.NetSqlClient Data Provider. why this error comes and I have executed the SQL query in SSMS succesfully and the result comes. However this is causing the report from the report manager to fail.
View 8 Replies
View Related