Changing Values Returned...Newbie Needs Help.
May 29, 2008
Hi Guys,
I have had a look through the forum and I can't seem to be able to find how to do this... I have a vague recollection of achieving this before but it was many years ago since I've done any sql.
I have a table like this
StaffID JobNumber Status
------- --------- ------
1 50 'In Progress'
2 20 'On Hold'
3 30 'Completed'
4 40 'Completed'
what I want to be able to do is change the status to something common if it is not 'Completed' I don't want to update the database though, I just want to return it in a select statement. Is this possible.
My output would be something like;
StaffID JobNumber Status
------- --------- ------
1 50 'NOT Completed'
2 20 'NOT Completed'
3 30 'Completed'
4 40 'Completed'
Many thanks in Advance.
Bobg
View 3 Replies
ADVERTISEMENT
Feb 23, 2007
I have a DTSX package which reads values from a fixed-length text file using a data reader and writes some of the column values from the file to an Oracle table. We have used this DTSX several times without incident but recently the process started inserting NULL values for some of the columns when there was a valid value in the source file. If we extract some of the rows from the source file into a smaller file (i.e 10 rows which incorrectly returned NULLs) and run them through the same package they write the correct values to the table, but running the complete file again results in the NULL values error. As well, if we rerun the same file multiple times the incidence of NULL values varies slightly and does not always seem to impact the same rows. I tried outputting data to a log file to see if I can determine what happens and no error messages are returned but it seems to be the case that the NULL values occur after pulling in the data via a Data Reader. Has anyone seen anything like this before or does anyone have a suggestion on how to try and get some additional debugging information around this error?
View 12 Replies
View Related
Jun 20, 2006
Hi all,
I have a SP that needs to return a record set based upon the values of calling another SP. The 2nd SP uses the output parameter and works fine. However, the resulting Insert doesnt see the value. I cannot for the life of me work out why not!
My other question is how do I stop the imbedded procedures from outputing a result? When the procedure is run in analyser it produces three sets of data. The first two being the outputs for the two SPs.
Any help would be much appreciated!
Code as follows:
CREATE PROCEDURE [dbo].[trl_GetOpenDurations] AS
--- CALLS the sp trl_CallOpenDuration with the following params
---1 min minute value - int
---2 max minute value - int
---3 return value - int - interval in minutes
set nocount on
declare @min int --- less than 1 min
declare @hour int --- more than 1 min, less than 1 hour
create table #t ([Type] VARCHAR(10) ,[Value] int)
EXECUTE trl_callOpenDuration 0,1,@min
insert into #t ([Type],[Value]) values ('<1Min', @min)
EXECUTE trl_callOpenDuration 1,60,@hour
insert into #t ([Type],[Value]) values ('<1Hour',@hour)
---get data from table
Select * from #t
GO
RESULTS:
<1Min NULL
<1Hour NULL
View 1 Replies
View Related
May 15, 2008
Hello,
I'm brand new to this forum and I'm stuck. We've got a query which queries three tables: booking, catheter and patients. The following (dodgy) query has pulled off the data for years, without problems:
SELECT
CARDIAC_CATHETER.CARDIAC_CATHETER_ID,
CARDIAC_CATHETER.OPERATOR1,
CARDIAC_CATHETER.TEST_DATE,
BOOKING.STATUS,
BOOKING.TEST_DATE AS BOOKING_TEST_DATE,
BOOKING.PROCEDURE_DATE_TIME,
CARDIAC_CATHETER.ITEM_NO,
CARDIAC_CATHETER.BILLING_CATEGORY,
PATIENTS.REFERRING_PHYSICIAN1,
PATIENTS.HOSPITAL_UNIT_NUMBER
FROM
(CARDIAC_CATHETER INNER JOIN PATIENTS ON CARDIAC_CATHETER.PATIENT_ID = PATIENTS.PATIENT_ID)
LEFT OUTER JOIN BOOKING ON PATIENTS.PATIENT_ID = BOOKING.PATIENT_ID AND 'CATHETER' = BOOKING.CLINIC AND BOOKING.STATUS <> 'CANCELLED' AND BOOKING.PROCEDURE_DATE_TIME >= (CARDIAC_CATHETER.TEST_DATE - 1)
AND BOOKING.PROCEDURE_DATE_TIME < (CARDIAC_CATHETER.TEST_DATE + 1)
WHERE
CARDIAC_CATHETER.TEST_DATE > '2005-04-01' AND CARDIAC_CATHETER.BILLING_CATEGORY LIKE '3%'
About 2500 perfect rows and 12 rows which have duplicate catheter id values. There are six pairs of duplicated records. It's only the cardiac_catheter.catheter_id and cardiac_catheter.test_date which are duplicated - the first row shown below contains correct values, the second doens't. The other values returned, on both rows, are correct. Here is some sample data:
CARDIAC_CATHETER_ID
cat_id1234
cat_id1234
CARDIAC_CATHETER_TEST_DATE
19/12/2005 13:17
19/12/2005 13:17
BOOKING_TEST_DATE
19/12/2005 13:33
19/12/2005 08:46
PROCEDURE_DATE_TIME
20/12/2005 10:30
19/12/2005 08:46
CLINIC
CATHETER
CATHETER
I know the query is rubbish. Has anyone got any idea how it can be improved and sorted so that we don't pull back ambiguous data?
Thanks,
Stewart
View 5 Replies
View Related
Jul 23, 2005
I have a table where inactive names are lower case and active names areuppercase. Note: Not my design.Anyways I want to select all names form this table where the name isuppercase. I see collate and ASCII pop up in searches but the examplesdon't seem usable in queries as much as they were for creating tablesand such.Thanks,Phil
View 5 Replies
View Related
Dec 23, 2007
I have a stored procedure that selects * from my table, and it seems to be working fine:
USE myDB
GO
IF OBJECT_ID ( 'dbo.GetAll', 'P') IS NOT NULL
DROP PROCEDURE GetAll
GO
CREATE PROCEDURE GetAll
AS
DECLARE ref_cur Cursor
FOR
SELECT * FROM myTable
Open ref_cur
FETCH NEXT FROM ref_cur
DEALLOCATE ref_cur
The problem is, I'm trying to create a DB class, and I'm not sure what Parameter settings I'm supposed to use for my returned values. Can anyone help me finish this?public class dbGet_base
{
public dbGet_base()
{
_requestId = 0;
}
public dbGet_base(Int64 RequestId)
{
this._requestId = RequestId;
getDbValues(RequestId);
}
public void getDbValues(Int64 RequestId)
{
getDbValues(RequestId, "GetAll");
}
public void getDbValues(Int64 RequestId, string SP_Name)
{
using(SqlConnection Conn = new SqlConnection(ConfigurationManager.AppSettings["WSConnection"]))
using (SqlCommand Command = new SqlCommand(SP_Name, Conn))
{
Command.CommandType = CommandType.StoredProcedure;
Command.Parameters.Add("@Request_Id", SqlDbType.Int).Value = RequestId;
Command.Parameters.Add(??
}
}
View 3 Replies
View Related
Jan 4, 2005
say i have a table, and in it are two columns, column1 and column2 and i do the following query:
SELECT column1, column2 FROM table WHERE column2 = '12345'
i want to check if column1 has all the same values, so in the first case, no
column1 column2
------- --------
4 12345
9 12345
5 12345
column1 column2
------- --------
9 12345
9 12345
9 12345
in the 2nd case, column1 contains all the same values, so yes
is there anyway i can check this? i would be doing this in a trigger.. say when a new row is inserted, the value of column1 is inserted, but col 2 is null.. so when they try to fill in the value for col2 of that row, the trigger checks to see if the value they put for col 2 is already in the table.. if it isn't, then everything is ok. but if it is already in teh table, then it checks col1 to see if all the values of col1 are the same
i hope this makes sense
thanks
View 2 Replies
View Related
Jan 24, 2012
I am getting the following results from my query that contains a subquery, but I don't understand why the values in the [Total Volume M_Active_Previous] are being repeated with the same value. I should be getting different values returned for each row like in the [Total Volume M_Active] column.
Why the values are all the same and how I can fix this?
DayNoDayTotal Volume M_ActiveTotal Volume M_Active_Previous
6 Friday11161 72491
7 Saturday5687 72491
2 Monday14354 72491
1 Sunday3966 72491
4 Wednesday12340 72491
3 Tuesday12018 72491
5 Thursday11833 72491
Here is the SQL I'm using.
Code:
DECLARE @StartDate datetime, @EndDate datetime, @Prev_StartDate datetime, @Prev_EndDate datetime
SET @StartDate = '2011-03-13 00:00:00.000'
SET @EndDate = '2011-03-19 23:59:59.999'
SET @Prev_StartDate = '2011-03-06 00:00:00.000'
SET @Prev_EndDate = '2011-03-12 23:59:59.999'
[Code] ....
View 5 Replies
View Related
Nov 10, 2000
I am trying to use a stored procedure inside the scripter in a site server pipeline. Can anyone tell me how the scripter will read the the result which is a variable. The stored procedure is returning the right value when run in query analyzer but I don't know how to retrieve it inside the pipeline.
Thank you
JG
View 1 Replies
View Related
Aug 8, 2012
This should be a simple solution, but it has been a long time since I've done any query writing (mostly in Oracle) and I am stumped, so here goes:
We are in the process of converting Access database to MSSQL with web form front ends.
I have a table, all columns are nullable, and want users to be able to query from a form, which has a field for each column and defaults to a % wild card for the entered value.
I want the users to be able to put any string in any field, and have it return each row that matches that, including rows with null values in the other columns, but not the column with the entered criteria.
Here is a sample of the data:
Code:
SQL> select * from test;
COL1 COL2 COL3 COL4
----- ----- ----- -----
this is a test
this is not test
this is not
this is test too
is test too
is too
is too
7 rows selected.
Now, if I have this SQL run, it will return only rows that have no nulls in any columns:
Code:
select
col1,
col2,
col3,
col4from test
where
col1 like'th%'
and col2 like '%'
and col3 like '%'
and col4 like '%';
COL1 COL2 COL3 COL4
----- ----- ----- -----
this is a test
this is not test
this is test too
Now, if I use an OR clause for each column, this mostly works, but the trouble is it will also return rows with null values for the field that has criteria entered in it:
Code:
select
col1,
col2,
col3,
col4from test
where
(col1 like'th%' OR col1 is null)
and (col2 like '%' OR col2 is null)
and (col3 like '%' OR col3 is null)
and (col4 like '%' OR col4 is null);
COL1 COL2 COL3 COL4
----- ----- ----- -----
this is a test
this is not test
this is not
this is test too
is test too
is too
is too
The idea is to only select the first 4 rows in the above example.
I was playing with ISNULL in the select clause, but all it does is substitute a string for a null, and I think CASE will do the same thing.
Is there a way I can write this query so it will return rows with NULL values in any column, except the one(column) that has user entered criteria in it?
View 9 Replies
View Related
Apr 29, 2004
The query below gets percentage of coils for a location by anneal cycle. It does this correctly (ie, if you change count(*)/b.total to count(*), b.total ... show both columns, the numbers its pulling are correct), but in its current state (trying to divide count by total), it always returns a zero (no decimal values).
If I change that section to : (count(*)*100/ b.total*100)/100, I get integer percentages: no decimals (this is a problem because some records round off to zero). I'm pretty sure this is the entire problem (why I'm getting zeros as written below), but I don't have a clue how to fix it. Is this some kind of server setting that allows the query to only return decimal values or something?
select a.department, a.cycle, count(*)/ b.total percentage
from inventory a join (select department, count(*) total from inventory
where location not like 'bas%' and archived = 0 and quality_code = 'p'
group by department) b on a.department = b.department
where a.archived = 0 and a.quality_code = 'p' and location not like 'bas%'
group by a.department, a.cycle, b.total
order by a.department, a.cycle
View 2 Replies
View Related
Apr 17, 2008
I am building reports against our TFS development db.
One of the reports tracks days spent (Dwell Time) in various status categories (eg: New, Assigned, In Development, Hold, etc) for a given "ticket".
For a fixed list of values from {Work Item].System_State, I can send the results (days in Assigned) to the column named (Assigned) for each status for each event in the [Work Item History], and then sum them for each ticket as:
Ticket ID New Assigned InDev etc
1230001 2 0 0 ...
1230001 0 1 2 ....
SUM 2 1 2 ....
However, I have many different Projects, each of which use their own Status names.
I don't want to duplicate the same basic report, if I can avoid it.
How can I name and generate this data for the unique Status list for each Project?
Simplest analog is: name = First(Fields!Status.Value, "TFSdb")
and allows value for a column name (category) as: =IIF(Fields!Status.Value = First(Fields!Status.Value, "TFSdb"), Fields!Days.Value, 0)
However this fails beause:
1. It only delivers the FIRST status value, and,
2. I cannot SUM an expression which is itself an aggregate (using First).
View 4 Replies
View Related
Sep 15, 2006
I have a question regarding the values returned in the SEARCHABLE column of the system stored procedure sp_datatype_info. What do ALL of the values mean? The SQL Server BOL only provides meanings for the values 0 and 1, but I am also seeing values 2 and 3. What are the meanings of these values?
Thanks,
Sean
View 2 Replies
View Related
Oct 19, 2006
Hello--
For extracting the link structure of a dependency network with a large number of nodes (for problems having a large number of variables), we have been using the stored procedure:
System.Microsoft.AnalysisServices.System.DataMining.DecisionTreesDepNet.DTGetNodeGraph('{model-name}', value)
The stored procedure returns a resultset with columns: [Node_type], [Node_unique_name_1], [Node_unique_name_2], and [MSOLAP_NODE_SCORE]
Are there any pointers, references or descriptions of the values of [MSOLAP_NODE_SCORE]?
Thanks,
- Paul
View 5 Replies
View Related
Apr 10, 2007
I have no problem getting OLE DB Command transformations to support single returns by a procedure.
For example, exec name_of_procedure ?,?,? OUTPUT
However, I have a stored procedure which accepts 1 input and returns 5 outputs. This procedure works fine at the command line but when I try to incorporate it into a OLE DB Command I don't get the multiple values returned. There's no problem at all configuring the transform as it recognizes all input and output parameters. For some reason I just don't get values returned.
thanks
John
View 14 Replies
View Related
May 8, 2009
I'm using SSIS 2005 Enterprise edition, I'm creating a package that reads an excel (xls) file using the "excel source" component, and it dumps the data into an OLEDB destination (a sql server). When I drag the excel source component and create the excel connection to my file the component automatically reads the columns and their datatypes.
The problem is that I have a column which has numeric data and the package uploads as NULL every number that starts with a zero. (note: in excel this column is formatted as "text", despite it has only numbers, because it's the only way excel maintains the left sided zeros).
So I checked the data types by right clicking the excel source component -> show advanced editor and my surprise is that this column's data type is detected as double-precision float, and it doesn't let me change it. URL... but it only works when the first row of data has a number beginning with zero on this column. How to get the data imported correctly?
View 15 Replies
View Related
Mar 8, 2000
I have a field called Trainee1 and there are about 3 in every 10 records that the value is <NULL> - I want to change that value to 0.
I have tried to use this command but it changed EVERY record to <NULL>
update Trainee1 set RegId=replace(RegId,'NULL','0')
Has anyone any suggestions on how to just change the records where the value of traineeId is <NULL>???
Thanks in advance,
Anthony
View 2 Replies
View Related
Jun 3, 2004
What is the best way to design your tables in cases where field values change?
Example:
CREATE TABLE Product (ProductID INT, Description VARCHAR(32), Price SMALLMONEY...);
CREATE TABLE Purchase (PurchaseID INT, ProductID INT, Quantity INT);
Since price obviously change over time, I was wondering what the is the best table schema to use to reflect these changes, while still remembering previous price values (like for generating reports on previous sales...)
is it better to include a "Price SMALLMONEY" field in the purchases table (which kind of de-normalizes it) or is it better to have a separate ProductPrice table that keeps track of changing prices like so:
CREATE TABLE ProductPrice (ProductID INT, Price SMALLMONEY, CreationDate DATETIME...);
and have the Purchase table reference the ProductPrice table instead of the products table?
I have used both methods in the past, but I was wanted to get other peoples' take on it.
Thanks
View 3 Replies
View Related
May 2, 2004
I have the problem of dynamically changing a field value in a row depending on the value of the same field in the previous row, assuming the table is sorted on that field.
:(
You may consider that field as a key of same sort as other values in the table do not help in selecting them uniquely.
Ex.
Before After
130 -> 130
130 -> 130A
140 -> 140
140 -> 140A
View 5 Replies
View Related
Jul 20, 2005
How can i change the default value of a column? I already have a columnnamed DateOfRental but I want to alter it so that it has default valuegetdate()ThanksDavid--http://www.nintendo-europe.com/NOE/...=l&a=Prodigious
View 4 Replies
View Related
Sep 21, 2006
Hi!
We have 2 dbs on our dw-server and the autogrowth values for both the data- and logfiles on both of these dbs changes about once a month. The data autogrowth value changes from 10megs to a percentage value between 3200 and 6400 and the log-file value changes from 10 percent to a percentage value between 3200 and 6400. Resulting in huge files and filling the drive.
What am I missing here?
BR John
View 17 Replies
View Related
Aug 15, 2013
Aim- the following columns “Cancel_Date”, “First_Post_Date”,“Last_Post_Date” can either be populated with figures or have a null value.
I want all Null values to be removed and be replaced with a blank
Final table is
Select *
from #test
left join #SF_AccountBuild on #test.FDMSAccountNo = #SF_AccountBuild.[External FDMSaccountno]
Results
[FDMSAccountNo],
External_ID ,
Parentsfid,
[DBA Name],
[Legal Name],
Street,
[MM3-DBA-ADDR2],
[Code] .....
View 5 Replies
View Related
May 4, 2003
Here's the deal:
I import a flat file from a legacy system, and then convert it into a single table. That works simply enough.
Then I have a SP that querys that table using a parameter for an accountID. My business tier calls that SP and returns the results to the calling tier (my web application). Easy enough...
Now for the question. The people who created the flat file (written in COBOL) decided to use "codes" to represent data. So, for instance, if I'm looking for the account plan, I can expect to see characters like ], or [, or +, etc... These characters have a special meaning, like:
] = Plan A
[ = Plan B
+ = Plan C, and so on.
Currently, the web application displays those characters, but I want it to display the actual plan name. Is there a way that when I execute the SP, the SP could pull the necessary records, and whenever it encounters a certain "plan" character, it could convert it into a "readable" name? Say that it sees that the plan_type field has a value of "]" for twenty records, so it converts those twenty records' plan_type value from "]" into "Plan A"? I'm not sure if I can do that, but I want to at least evaluate the option if I can.
I've evaluated other options, like using a CASE statement in my code, but I shot that down quickly...for obvious reasons. I don't wanna be changing my web application or business tier each time these guys update a plan name, or add a new one, delete an existing one, etc...
I've also thought about creating a dictionary table than contains the plan's code and its name, and then just INNER JOIN the first table with the dict table. This would keep my SP very simple (it's very straight-forward right now, and I like that). That way, if a plan name is ever changed, or a new one is added, I simply update the dict table using a simple query. However, if my SP is doing the conversion, I could just as easily update the SP.
Either of these methods would work for me, and I *do* know how to do the latter (dict table). However, there are quite a few other fields that I may have to do this for. I believe when I left for the day on Friday, my last count was 14 fields total that needed translation. That would mean 14 different dict tables! That could certainly affect my SP performance with all those INNER JOINS!
Therefore, I'm certainly interested in figuring out if it's possible to do the former method (SP), and then I shall decide which method is best for my situation.
Feel free to include your thoughts on which process you think is better as well. I'm really riding the fence with this one. However, if I can't find out how to change field values in my SP, then obviously I'll make a decision very quickly...
Thanks in advance.
View 3 Replies
View Related
Sep 18, 2015
I've got this virus URL... in our production server. It is changing the values in a table column.
View 6 Replies
View Related
Nov 7, 2006
Hello,i have a table and if a record is inserted i will test a numeric valuein this table. If the this value is greather as 1 million, than anstatus column should be changed from 'A' to 'B'.Yes and sorry, this is a newbie question.On Oracle this work simple:create trigger myTrigger on tableXasbeginif :old.x 100000 then:new.y:='B'end if;end;ThanksMaik
View 2 Replies
View Related
Apr 25, 2008
Has anyone seen this issue before? We are running a SQL CE 3.5 database on a windows desktop. A couple of our tables have ntext fields. When we do an insert the statement updates the value for all rows, not just the one that was added. I can easily repro this with some of the online samples too. Try the following:
SqlCeConnection conn = new SqlCeConnection(_sConn);
conn.Open();
SqlCeCommand cmd = conn.CreateCommand();
cmd.CommandText = "CREATE TABLE BlobTable(name nvarchar(128), blob ntext);";
cmd.ExecuteNonQuery();
cmd.CommandText = "INSERT INTO BlobTable(name, blob) VALUES (@name, @blob);";
SqlCeParameter paramName = cmd.Parameters.Add("name", SqlDbType.NVarChar, 128);
SqlCeParameter paramBlob = cmd.Parameters.Add("blob", SqlDbType.NText);
paramName.Value = "Name1";
paramBlob.Value = "Name1 Memo";
cmd.ExecuteNonQuery();
cmd.CommandText = "INSERT INTO BlobTable(name, blob) VALUES (@name, @blob);";
SqlCeParameter paramName = cmd.Parameters.Add("name", SqlDbType.NVarChar, 128);
SqlCeParameter paramBlob = cmd.Parameters.Add("blob", SqlDbType.NText);
paramName.Value = "Name2";
paramBlob.Value = "Name2 Memo";
cmd.ExecuteNonQuery();
After the second execution the blob column in both rows will have the value 'Name2 Memo'.
This is obviously a huge problem for us and would appreciate it if someone can explain what is happening. Seems like a bug but would like to be certain before I go the support route.
View 1 Replies
View Related
Nov 6, 2006
Hi
I'm working with merge replication between Sql Server 2005 and Sql Server 2005 Mobile. I'm using dynamic filtering by function HOST_NAME (... where Table.FilteredColumn = HOST_NAME())
When I'm trying to chagne values from filtered column on the client side (Table.FileteredColumn) I get error message that the column is read-only.
How can I change data in filtered column? Is this possible?
View 3 Replies
View Related
May 24, 2007
I have a report I want to modify and when I go to deploy it I get:
Changing the report parameters or data sources to the values you specified is not allowed. The report is configured to run unattended. Using the specified values would prevent the unattended processing of this report
Now I understand the error, it is because on the report server's web management interface I entered credentials for the report to run that point to a custom datasource and supplied the appropriate credentials to run the report.
However, I don't want to have to reconfigure that just to deploy a slightly modified version of the report.
How can I get around this? Or what is the proper work around? I just want to change the background color from dark gray to light gray on a header column....
Thanks!
View 5 Replies
View Related
Mar 9, 2007
I can't figure this one out...
I have an Excel spreadsheet (Excel 2003 format) with a column of values. The column is formated to General (although I've tried it formated to text). The values are alphanumeric. However, there are a few values that are completely numeric.
Example:
_ITEMNUMBER_
1-528
K214-5
184PR
45678
As can be seen, the last value is completely numeric. I am importing into a table with one column that is formated as nvarchar(50).
I use dtswizard.exe and do a simple import into the table and the alphanumeric values import just fine but anytime a value is completely numeric it has a NULL value in the table instead of the value that should be there.
I've tried changing the format of the column to nchar, char, etc, etc. Always comes in NULL.
Any ideas?
View 7 Replies
View Related
Aug 27, 2015
I have a QA Deployment Date field that is being returned in a custom report I created. I also found a sample date range parameter:
What I want to accomplish:
I want to select a From and To Date and filter the report to only display the rows that have the QA Deployment Date within the selected range.
For example.. I want to select From Date (8/1/2105) and To Date (8/31/2015) and I only want to return only the results that have a QA Deployment date between that selected range.
View 3 Replies
View Related
Jun 20, 2006
I have a strange problem. I have some code that executes a sql query. If I run the query in SQL server query analyzer, I get a set of data returned for me as expected. This is the query listed on lines 3 and 4. I just manually type it into query analyzer.
Yet when I run the same query in my code, the result set is slightly different because it is missing some data. I am confused as to what is going on here. Basically to examine the sql result set returned, I write it out to an XML file. (See line 16).
Why the data returned is different, I have no idea. Also writing it out to an XML file is the only way I can look at the data. Otherwise looking at it in the debugger is impossible, with the hundreds of tree nodes returned.
If someone is able to help me figure this out, I would appreciate it.
1. public DataSet GetMarketList(string region, string marketRegion)2. {3. string sql = @"SELECT a.RealEstMarket FROM MarketMap a, RegionMap b " + 4."WHERE a.RegionCode = b.RegionCode"; 5. DataSet dsMarketList = new DataSet();6. SqlConnection sqlConn = new SqlConnection(intranetConnStr); 7. SqlCommand cmd = new SqlCommand(sql,sqlConn);8. sqlConn.Open();9. SqlDataAdapter adapter = new SqlDataAdapter(cmd); 10. try11. {12. adapter.Fill(dsMarketList);
13. String bling = adapter.SelectCommand.CommandText;//BRG 14. dsMarketList.DataSetName="RegionMarket"; 15. dsMarketList.Tables[0].TableName = "MarketList"; 16. dsMarketList.WriteXml(Server.MapPath ("myXMLFile.xml" )); // The data written to 17. myXMLFile.xml is not the same data that is returned when I run the query on line 3&4 18. // from the SQL query 19. } 20. catch(Exception e) 21. { 22. // Handle the exception (Code not shown)
View 2 Replies
View Related
Feb 24, 2007
Hi there
I sorry if I have placed this query in the wrong place.
I'm getting to grips with ASP.net 2, slowly but surely!
When i try to access my site which uses a Sql Server 2005 express DB i am receiving the following error:
Server Error in '/jarebu/site1' Application.
Database 'd:hostingmemberasangaApp_DataASPNETDB.mdf' already exists.Could not attach file 'd:hostingmemberjarebusite1App_DataASPNETDB.MDF' as database 'ASPNETDB'.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.SqlClient.SqlException: Database 'd:hostingmemberasangaApp_DataASPNETDB.mdf' already exists.Could not attach file 'd:hostingmemberjarebusite1App_DataASPNETDB.MDF' as database 'ASPNETDB'.Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below. Stack Trace:
[SqlException (0x80131904): Database 'd:hostingmemberasangaApp_DataASPNETDB.mdf' already exists.
Could not attach file 'd:hostingmemberjarebusite1App_DataASPNETDB.MDF' as database 'ASPNETDB'.]
System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) +735075
System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) +188
System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj) +1838
System.Data.SqlClient.SqlInternalConnectionTds.CompleteLogin(Boolean enlistOK) +33
System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance) +628
System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance) +170
System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection) +359
System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options) +28
System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject) +424
System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject) +66
System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject) +496
System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) +82
System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) +105
System.Data.SqlClient.SqlConnection.Open() +111
System.Data.Common.DbDataAdapter.FillInternal(DataSet dataset, DataTable[] datatables, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior) +121
System.Data.Common.DbDataAdapter.Fill(DataSet dataSet, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior) +137
System.Data.Common.DbDataAdapter.Fill(DataSet dataSet, String srcTable) +83
System.Web.UI.WebControls.SqlDataSourceView.ExecuteSelect(DataSourceSelectArguments arguments) +1770
System.Web.UI.DataSourceView.Select(DataSourceSelectArguments arguments, DataSourceViewSelectCallback callback) +17
System.Web.UI.WebControls.DataBoundControl.PerformSelect() +149
System.Web.UI.WebControls.BaseDataBoundControl.DataBind() +70
System.Web.UI.WebControls.GridView.DataBind() +4
System.Web.UI.WebControls.BaseDataBoundControl.EnsureDataBound() +82
System.Web.UI.WebControls.CompositeDataBoundControl.CreateChildControls() +69
System.Web.UI.Control.EnsureChildControls() +87
System.Web.UI.Control.PreRenderRecursiveInternal() +41
System.Web.UI.Control.PreRenderRecursiveInternal() +161
System.Web.UI.Control.PreRenderRecursiveInternal() +161
System.Web.UI.Control.PreRenderRecursiveInternal() +161
System.Web.UI.Control.PreRenderRecursiveInternal() +161
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +1360
Version Information: Microsoft .NET Framework Version:2.0.50727.42; ASP.NET Version:2.0.50727.210
This is the connection string that I am using:
<connectionStrings>
<add name="ConnectionString" connectionString="Data Source=.SQLEXPRESS;AttachDbFilename=|DataDirectory|ASPNETDB.MDF;Integrated Security=True;Initial Catalog=ASPNETDB;User Instance=True" providerName="System.Data.SqlClient"/>
</connectionStrings>
The database is definitly in the folder that the error message relates to.
What I'm finding confusing is that the connection string seems to be finding "aranga"s database.
Is it something daft?
Many thanks.
James
View 1 Replies
View Related
Apr 16, 2014
How to count the number of values that exist in a row based on the values from an array of numbers. Basically the the array of numbers I want to look for are in row 1 of table [test 1] and I want to search for them and count the "out of" in table [test 2]. Excuse me for not using the easiest way to convey my question below. I guess in short I have 10 numbers and like to find how many of those numbers exist in each row. short example:
Table Name: test1
Columns: m1 (int), m2 (int), m3 (int) >>> etc
Array/Row1: 1 2 3 4 5 6 7 8 9 10
------
Table Name: test2
Columns: n1 (int), n2 (int), n3 (int), n4 (int), n5 (int)
Row 1: 3, 8, 18, 77, 12
Row 2: 1, 4, 5, 7,18, 21
Row 3: 2, 4, 6, 8, 10
Answer: 2 out of 5
Answer: 4 out of 5
Answer: 5 out of 5
View 2 Replies
View Related
