Is there a way to adjust the orientation of the grouping labels (x-axis) of a bar chart in a report. So instead of displaying the grouping label text horizontally I want to display the text vertically? Is there any way to access the chart object and code this in the report from properties ->code tab? Any suggestions?
View 1 RepliesI'm just getting into creating charts and one I'm working on could realy do with a prefix on its axis label, the symbol '£'.
I honestly have no idea how to do this and what syntax to use, can anyone help ?.
Also as the label could do with having a thousands seperator as well but as you can tell I'd have no idea how to do this either.
Thanks.
Hello,
I have a Chart with one series as values.
The chart is good and I can see the series label in the corner.
I can hide it by uncheck the "show legend.
Now I added another value to my chart and got another series label.
Is there a way to hide only one label?
If I use =" " in the "series label" of that data then the label its self is hidden but the label mark is still visible.
Thanks.
Hi,
I need to label stacked bar /column charts with the percentage of each series at each axis point.
For example, if I have the following values in the chart:
Series 1 Series 2
Axis point 1 50 25
Axis point 2 12 12
I need the labels to read: Series 1 Series 2
Axis point 1 67% 33%
Axis point 2 50% 50%
It would seem that I need to format the data point labels to read something like: sum (data.label)/sum(data.label, "axis point")
Any ideas would be appreciated. Thanks in advance for your elegant solutions
I have a Stacked Column graph and when we set the Position of the Point Label to be "Top Center", the Point Label always stays in the center of that particular Bar.
On a easier, basic Bar chart, the Point Label setting works correctly.
Has anyone else had a similar issue or know if this is a known issue ?
I have pie chart. In this i have to display the category group name , count as a data label. In this both category name and count should be in seperate line and should be in centre allignment. But for it is not centre allignment. In series label properties i am using this expression,=Fields!Group.Value & VbCrLf & Count(Fields!Countvalue.Value).I am geeting new line. But not in center allignment.
View 2 Replies View RelatedIn my Chart I have to keep the angel of the category field fix to 90 degree. When I do this the format of the Label does not look quite right.
I expect Below : I can work Out dd and mm positions ..what I am concerned about the date direction because of which its not quite readable.
I have tried many format in label format but it is not giving expected result.
Data Label formatting issue in SSRS Databar? Refer the below screenshot:
View 3 Replies View RelatedI have created range bar chart and I am not able to achieve the following tasks.
1. Change X-axis Label Format to Quarter:
I have x-axis with dates and y axis of project groups. I have changed x-axis interval type = month and interval=3.
Set the Maximum = Max(ProjectEndDate) and Minimum = Min(ProjectStartDate).
Now my chart showing 3 months x-axis interval dates in mm/dd/yyyy format. I want to change this interval date format to Quarter. The problem is LabelsFormat property is not recognize the "=Q or q or quarter" and also not accepting the expressions. How can I achieve this?
2. Placing series side by side when it is not overlapping
I want to place the same group series side by side only when the previous project end date is less than next project start date, otherwise place the next project to next row. How can I achieve this?
Hi all,
I'm having a problem and I cannot seem to find how to fix this anywhere on the web.
I have a stacked bar chart with my data labels showing down the x axis. My client wants me to put a bit of white space between the label and the actual chart. So I tried adding spaces to my data label but of course RS thinks they don't exist since they are not non breaking spaces.
How can I do the following in my chart label
=Fields!Myfield.Value & " "
As you can see I want to add a couple of spaces to my data label. I can't use , all the ampersands get confused. I tried & char(32) but RS doesn't like char(n). I tried ChrW(160) [I saw this in the web somewhere] but this didn't work either.
Is there anything I can do?
thanks in advance, I'm at my wits end (again)
Annabel
hey there
Using Reporting Services 2005
I have a date time field
Fields!CreatedDate.Value which I am grouping on and Counting on an ID Field
result of grouping is this
7/13/2006 12:00:00 AM 1
7/21/2006 12:00:00 AM 11
8/7/2006 12:00:00 AM 3
8/8/2006 12:00:00 AM 2
I know if I put (Month(Fields!CreatedDate.Value)
I get this result
7 1
7 11
8 3
8 2
What I really want is
July 12
August 5
how do I do this please
thanks
hey there
I have a date time field
Fields!CreatedDate.Value which I am grouping on and Counting on an ID Field
result of grouping is this
7/13/2006 12:00:00 AM 1
7/21/2006 12:00:00 AM 11
8/7/2006 12:00:00 AM 3
8/8/2006 12:00:00 AM 2
I know if I put (Month(Fields!CreatedDate.Value)
I get this result
7 1
7 11
8 3
8 2
What I really want is
July 12
August 5
how do I do this please
thanks
Hi
I'm trying to create a chart with monthly comparisons, but when i throw my months into the chart it groups them under one another instead of next to one another. Please Help!!
Kind regards
Carel Greaves
I have a chart with series that needs conditional colour for three conditions. One condition must be transparent. I have tried the various IFF or SWITCH expressions below and some work fine in SSDT but when I deploy them to the browser the formatting is lost. This simple IFF expression works. The series is transparent as required both in SSDT (Visual Studio BIDS) and IE11 and Firefox browsers but I need two other conditions.
=IIF(Fields!ExhibitionID.Value = -1, "#00ffffff", "Red")
Both of the expressions below work in SSDT (Visual Studio BIDS) as expected but when deployed to the browser none of this formatting is rendered and all series are in blues even the ‘transparent’ series. No red at all.
=IIF(Fields!ExhibitionID.Value = -1,"#00ffffff", IIF(Fields!ExhDepartment.Value = 27,"Orange","Red"))
=Switch(Fields!ExhibitionID.Value
= -1,"#00ffffff",Fields!ExhDepartment.Value = 27,"Orange",(Fields!ExhDepartment.Value <> 27) AND (Fields!ExhibitionID.Value <> -1),"Red")
I have tried deleting various files RDL and DATA. I have tried uploading the file from report manager in IE and I have tried editing the file in report manager.
Hello All,
I have a reporting services report in the form of a chart. I have two datafields on the chart.
I need to be able to dynamically hide one datafield and view the chart for the other one and vice versa.
How do I do this ?
Any help would be appreciated..
Thanks!
When I export the report in excel format the chart is displayed as picture. I want it to be displayed as editable chart.Does Office Writer work in this situation and did anyone use Office Writer to accomplish same type of problem.Is there any other method or product we can use instead of the office writer.
View 2 Replies View RelatedI have a report designed in SSRS 2008 R2.My issue is that the data labels do not stay outside the bars for high values.
View 4 Replies View RelatedI need to create a chart with the following features
1) Bar chart that has data for 3 years (3 series)
2) Line chart that has the same data as per the above points on the bar chart but this is a running total. (3 series)
3) These data points are for the 12 months
4) there should be a secondary axis for the cumulative one
Can I create this using the same data set?
Hi Guys..
i don't know weather is it possible or not..but Can any One tell's me How can i refresh the Chart Values.. acutally what's happening..
i have two Chart in a reprot .. One is Main Category and other one is SubCategory... acutally what i want.. in Main Category chart sum of Quantities of Subcategory values comes in bar or any other format.. and when i click on Main chart any bar it's refresh the other chart and return the result of subcategory under that main category in details...
i don't know is this possible .. acutally i m very new in reproting.. infact that's my first report.. so i want to do this.. if any article or any help anyone can provide me..
Thanks
I'm really stumped on this one. I'm a self taught SQL guy, so there is probobly something I'm overlooking.
I'm trying to get information like this in to a report:
WO#
-WO Line #
--(Details)
--Work Order Line Detail #1
--Work Order Line Detail #2
--Work Order Line Detail #3
--Work Order Line Detail #etc
--(Parts)
--Work Order Line Parts #1
--Work Order Line Parts #2
--Work Order Line Detail #etc
WO#
-WO Line #
--(Details)
--Work Order Line Detail #1
--Work Order Line Detail #2
--Work Order Line Detail #3
--Work Order Line Detail #etc
--(Parts)
--Work Order Line Parts #1
--Work Order Line Parts #2
--Work Order Line Parts #etc
I'm unable to get the grouping right on this. Since the line details and line parts both are children of the line #, how do you do "parallel groups"?
There are 4 tables:
Work Order Header
Work Order Line
Work Order Line Details
Work Order Line Requisitions
The Header has a unique PK.
The Line uses the Header and a Line # as foreign keys that together are unique.
The Detail and requisition tables use the header and line #'s in addition to their own line number foreign keys. My queries ends up looking like this:
WO WOL WOLR WOLD
226952 10000 10000 10000
226952 10000 10000 20000
226952 10000 10000 30000
226952 10000 10000 40000
226952 10000 20000 10000
226952 10000 20000 20000
226952 10000 20000 30000
226952 10000 20000 40000
399999 10000 NULL 10000
375654 10000 10000 NULL
etc
Hierarchy:
WO > WOL > WOLD
WO > WOL > WOLR
It probobly isn't best practice, but I'm kinda new so I need some guidance. I'd really appreciate any help! Here's my query:
SELECT [Work Order Header].No_ AS WO_No, [Work Order Line].[Line No_] AS WOL_No,
[Work Order Requisition].[Line No_] AS WOLR_No, [Work Order Line Detail].[Line No_] AS WOLD_No
FROM [Work Order Header] LEFT OUTER JOIN
[Work Order Line] ON [Work Order Header].No_ = [Work Order Line].[Work Order No_] LEFT OUTER JOIN
[Work Order Line Detail] ON [Work Order Line].[Work Order No_] = [Work Order Line Detail].[Work Order No_] AND
[Work Order Line].[Line No_] = [Work Order Line Detail].[Work Order Line No_] LEFT OUTER JOIN
[Work Order Requisition] ON [Work Order Line].[Work Order No_] = [Work Order Requisition].[Work Order No_] AND
[Work Order Line].[Line No_] = [Work Order Requisition].[Work Order Line No_]
Hi,
I am not getting Mining Accuracy Chart and Min ing Model Prediction
Plz tel me how to do.And how to use the filter input data used to generate the lift chart and
select predictable mining model columns to show in the lift chart
i have to display some of my SQL data on a webpage, and i don't want to use the gridview and all his "friends". all i want is to display some values out of the sqlDataSource on my webpage.is it possible? and if so, then how can i do it?thanks in advance.
View 3 Replies View RelatedHello!
Is it possible to create a row of "labels" in a multi-value parameter list?
i mean something like this:
Name, Age
JJ, 12
PP, 10
Thanks
//C
I have a Report that has a document map Label in the Report which I need to remove.
However as the report has over 50 text-boxes I am having difficulty locating it.
I have had a look at the XML but that does not seem to indicate the offending text box.
Any advice would be greatly appreciated.
Regards
JohnJames
Hi,Just a little question...Is it possible to link a SqlDataSource to a label without using a repeater or a formview?I just want to select one column from a single row in a single table and sending the value to a label.The code would be something like this :<asp:SqlDataSource ID="SqlDataSource1" runat="server" ConnectionString="<%$ ConnectionStrings:MyConnectionString %>" SelectCommand="SELECT name FROM Page WHERE idPage = 1">
<SelectParameters>
<asp:Parameter DefaultValue="1" Name="idPage" Type="Int32" />
</SelectParameters>
</asp:SqlDataSource>
<asp:Label ID="Label1" runat="server" Text='<%# Eval("name") %>'></asp:Label> So, what can I add in the label properties or in the codefile to make this work if it is possible ?Or am I obliged to "hard code" it in c# with an SqlConnection, a SqlCommand and a SqlDataReader ?Thanks in advance...
Hello!
I am trying
to select info from a database (MS-SQL) and show that whit a label. And don’t really
get every thing to work. So I am glad for that help I can get.
SqlConnection myConnection = new SqlConnection();
myConnection.ConnectionString = "data
source='XXX';User ID='XXX';Password=XXX;database='XXX'";
myConnection.Open();
SqlCommand dataCommand = new
SqlCommand();
dataCommand.Connection
= myConnection;
dataCommand.CommandText = "SELECT XXX,XXX FROM XXX";
SqlDataReader dataReader =
dataCommand.ExecuteReader();
string notis1 = dataReader;
Label1.Text = notis1;
myConnection.Close(); Any help whould be helpfoul.
A SQL Server 2005 stored procedure expects a parameter UserID depending upon which it retrieves the no. of records & OrderIDs corresponding to the UserID from a DB table (note that OrderID & UserID are two of the columns in the DB table). So for e.g. consider a user whose UserID=6 & the DB table has 3 records where UserID=6. In other words, there are 3 OrderID records of the user whose UserID=6, say, OrderID=8, OrderID=17 & OrderID=29. The stored procedure will finally return 2 columns - the OrderCount (which is 3 for UserID=6) & the OrderID (which will be 8, 17 & 29 for UserID=6). This is the stored procedure:ALTER PROCEDURE dbo.OrderCount @UserID intASDECLARE @OrderCount intSET @OrderCount = (SELECT COUNT(OrderID) FROM NETOrders WHERE UserID= @UserID)SELECT @OrderCount AS OrderCount, OrderIDFROMNETOrdersWHEREUserID = @UserIDIn a VB class file, I am invoking the stored procedure in a function named GetOrderCount which returns a SqlDataReader back to the calling ASPX page. I want the ASPX page to display the 3 OrderIDs of UserID=6 in a Label control. Unlike the DataBinding controls like DataList, DataGrid, Repeater controls, the Label control will not automatically loop through the recordset. So I tried to accomplish this using a For....Next loopDim i As IntegerDim sqlReader As SqlDataReaderiUserID = Request.Cookies("UserID").Value'ShopCart is the name of the class in the VB class fileboShopCart = New ShopCartsqlReader = boShopCart.GetOrderCount(iUserID)While (sqlReader.Read) If (sqlReader.GetValue(0) > 1) Then pnlLinks.Visible = True For i = 1 To sqlReader.GetValue(0) lblLinks.Text = sqlReader.GetValue(1)(i) Next i Else pnlLinks.Visible = False End IfEnd WhileBut this generates the following error:No default member found for type 'Integer'.pointing to the linelblLinks.Text = sqlReader.GetValue(1)(i)in the above shown ASPX code. Can someone please correct me & suggest how do I loop through the recordset so that I can display the records in a Label control?
View 8 Replies View RelatedThis is my SQLDataSource for my gridview
<asp:SQLDataSource ConnectionString="<%$ ConnectionStrings:Pubs %>" id="sqlProducts" Runat="Server" SelectCommand=' "Select * from adressen INNER JOIN Adressoort ON adressen.AD_ID = Adressoort.AD_ID where " & lblsql.Text ' ></asp:SQLDataSource>
the label is something like : adressoort.AD_soort = '3' or adressoort.AD_soort = '1'
I keep on getting the error sever tag not well formed
Hi all,I would like to do something I thought was simple but I can't seem to figure it out. I would like to bind the Text properties to two labels to the columns in an SqlDataSource, much the same as you can bind a listbox to a SqlDataSource.Is this possible?The reason why I'm trying it this way is because I originally used an OleDB connection and datareader, but it doesn't seem to work on our service providers server (keeps saying that it can't find the database) even though it works on the four other server's I've tried. It definitely connects to the database when I use the SqlDataSource on a listbox control, but it fails when I use the same connection string with the OleDB connection.Is this the best way to go about it, or should I persist with finding the OleDB/datareader (the service provider has been no help at all). Thanks.
View 1 Replies View RelatedHi all. I have a label on my page and I want to bind it to a field in a table. The catch is that I want to bind it to the last row in the table. I think I can use the custom binding, but I don't know how to bind to the last row. Any Suggestions ?
p.s. The page is tied to an SqlDataSource that retrieves the data from the above table.
Thanks in advance.
hi,
i have this code it gets the records from db
i need to add the results of the datareader to a label but label control does not have a datasource property
second problem is how to comma separate the results.with array? or what please help
i need to show the results like this: record1,record2,record3Dim Conn As New SqlConnection(ConfigurationManager.ConnectionStrings("Conn").ConnectionString)
Dim strSQL As StringDim dr As SqlDataReader
Dim userID As Integer = Session("cmmLogonUserID")
strSQL = "select id,extension from musicExt"Dim cmd As New SqlCommand()cmd = New SqlCommand(strSQL, Conn)
Conn.Open()
dr = cmd.ExecuteReader()
'txtMediaFormats.Text = dr ???????
' ddlGenres.DataBind() ????????
Conn.Close()
Hi,
I have a sqldatasource which returns the result I want, but I need to assign it to a label or text box. Is there an easy way of doing this? I attempted it using this code:
PropertyFriendIDLabel.Text = PropUserIdSqlDataSource
Thanks
Here is my code. Basically what I am doing is selecting from the database based on the current user. The ReaderResults.Text label is not showing the info pulled from the database, and the ReaderError.Text label is not showing an error. I also tried putting the ReaderResults.Text label inside the loop and that didnt work. Any suggestions?
'Database ConnectionDim con As New SqlConnection("Data Source = .SQLExpress;integrated security=true;attachdbfilename=|DataDirectory|ASPNETDB.mdf;user instance=true")Dim currentUserID
currentUserID = Context.User.Identity.Name.ToString()
Label1.Text = currentUserID
Dim selectSQL As String
selectSQL = "SELECT companyKey FROM Company WHERE UserID = ('" + currentUserID + "')"Dim cmd2 As New SqlCommand(selectSQL, con)
Dim reader As SqlDataReaderDim CompanyKey
Try
con.Open()
reader = cmd2.ExecuteReader()Do While reader.Read()
CompanyKey = reader("CompanyKey").ToString()
Loop
reader.Close()Catch err As Exception
ReaderError.Text = "Error selecting record."
ReaderError.Text &= err.Message
ReaderResults.Text = CompanyKey
Finally
con.Close()
End Try