Hi,
I´m working with chart type bar (Simple Bar) and i received four values from stored procedure, all values are negative numbers. The Reporting Service shows the values in the chart, but, doesn't show the "bars".... If one of four values will be positive, the report shows the values and the "bars" but if all values will be negative, the report shows just de values.
What do I do for the bars appear with four negative values ?
Thanks.
I have a 2012 report builder chart that has two series (one area chart and one bar chart) combined into one chart. The problem I'm having is the bar chart has much smaller numbers than the area chart and the scaling is messed up.
Is there any way to put the bar chart on the right axis and keep the area chart on the left axis? My goal is to increase the size of the bar chart in relation to the area chart.
Also, is there any way to make the bar chart color red if the number is negative and green if it is positive?
calculating profit... how do I write an update query that will correct the gross profit calculated column for all negative qty transactions
Basically in the stored procedure that creates the table the query includes:
Profit = CASE Sale WHEN 0 THEN 0 ELSE (Sale - Cost) END,
which is wrong when sale and cost is negative the formula becomes
(-Sale + Cost).... I want it to be -(Sale-Cost) (where sale any cost ignores negative sign.....
but i dont know to write this....any ideas???
I have the following query, I would like to know if I can replace negative values with a zero and if a posiive value appears then leave the value alone?
SELECT TimeStamp, Tag1,Tag2,Tag3
FROM dbo.keller8
hi,
In the result of a function in my query, there are negative numbers.
How do I replace them with a 0 or is there a function like ISNULL that replaces the values that are negative?
thanks,
maarten
Hi,
I have table with a column which has both negative and positive values.
I want to calculate the sum of positve values and the sum of negative values from that column separately. Is it possible.
Plase help me.
Ex: My Input Values are
column1
-186.5499257
-141.8985222
-95.3846883
-71.1359768
-69.39071172
30.44750844
40.33666032
53.81527872
98.2967252
112.948667
OutPut goes like This
Column1 Column2
-186.5499257 null
-141.8985222 null
-95.3846883 null
-71.1359768 null
-69.39071172 -564.36
30.44750844 null
40.33666032 null
53.81527872 null
98.2967252 null
112.948667 335.84
Hello everybody,
I have a DTS package that imports excel spreadsheets.
The excel spreadsheet cells contain numbers based on vlookups. Now negative values appear in these cells as -999 but when loaded into the table they appear as (999).
Is there anyway way to configure it to just load -999? The tricky part is I don't have control over the format of the spreadsheet cell and the destination table field is varchar. I am hoping there is some way that the DTS interprets and picks up the value as it is displayed in excel.
Or do I have to stick with converting it manually by replacing '(' and ')' with nothing and appending '-'?
Thanks for any help.
Could anyone, please, explain to me why I have negative values inRowModCtr column in sysobjects table? I have tested that after I updatestatistics the RowModCtr column is reset to 0. But why do I havenegative values in the first place? Thx.
View 2 Replies View RelatedI have a bubble map which contains negative values for the data field.
If I Preview a bubble map report within Visual Studio, I can get the expected result.
However, once I deploy this report I cannot get any data back from the report (see screenshot below)
Once Deployed and viewed in IE:
Why this is occurring?
Also, the data field options in the Layer Wizard are SUM and COUNT. Can these be changed?
I developed the following T-SQL query that runs successfully, but I was looking for a more efficient and concise way to do this. Is there a CTE that can replace all of these case statements? I've updated my query as below. Although this sample query works, it's not working for my real data. Instead, I get an error. At the bottom is the error part of my real query.I copied all of the tables from the first query block below. But when I wrote the bottom query block, it underlined in red the words "answer" and "question." It says "Invalid column name".Â
if exists (select * from tempdb.dbo.sysobjects o where o.xtype in ('U') and o.id = object_id(N'tempdb..#hard_values')
) DROP TABLE #hard_values;
if exists (select * from tempdb.dbo.sysobjects o where o.xtype in ('U') and o.id = object_id(N'tempdb..#dummy_data')
) DROP TABLE #dummy_data;
if exists (select * from tempdb.dbo.sysobjects o where o.xtype in ('U') and o.id = object_id(N'tempdb..#temp')
[code]...
Hi,
I'm starting out with Visual Studio 2008 and SQL Server CE and have come unstuck at the first hurdle.
I have performed the below simple steps:
1. I have created a table with an identity field in it. The identify increment is a positive value (1). This works fine and I can populate data to the table directly.
2. I drag the table adapter from the dataset to a form to create a datagrid form.
When I run this form, the field for the identify column populates with negative values and when I go to save the record the application errors.
Note: this only happens with SQL Server CE. I do exactly the same with a server based db and get positive increments via the form.
The simple-ugly solution is to just set a negative increment in the table to match what is going on via the form, but this strikes me as a cop out. It is most likely that I am overlooking something obvious and I would be very appreciative if someone could point me in the right direction.
Thanks,
Julian
I have a table that displays a bunch of data based on their percentage changes.
There is a parameter (let's say 5%) that the user can set to display only the data which either increased more than 5% or decreased more than 5%.
I want to have a space between the positive changes and the negative changes. ie, to create a blank row between the +'s and the -'s. Does anyone know of a way to do this?
Thanks,
Steven
MS SQL Server 2008 R2
I have both positive and negative values in a single column, where I want sum total of positive values & negative values. Is there any Expression for this to sort out.
I have a chart with columns on it, and my boss wants me to display the height of each column on the chart.
Is there a way to do this? I've googled it some, and searched around in the chart properties, but I couldn't find anything.
am using a line chart to display series of results over time - data is got from and AnalysisServices cube.
problem is that sometimes there is no value for the result - and the chart doesnt display that as zero
e.g. with the following data
week 1 10 items
week 2 12 items
week 3 14 items
week 4 8 items
week 6 12 items
the chart will join the week 4 result of 8 items directly to the week 6 result of 12 items
is there anyway of changing this so the line goes from 8 items on week 4 to ZERO items on week 5 and then 12 items on week 6 ???
I am facing some problems in displaying data in a chart on a report. Let me give you a background on the report
The report has 8 parameters, Industry,CType,PType, S#, ECode, Start Date, End Date and Trend.
The layout of the report has a table and a chart.
Both the table and the chart need to display Normalized Value ( count of ECode / count of PType that are closed in the date range selected) and the Trend ( where the trend can be Weekly, Monthly, Yearly or Quarterly).
Both the chart and the table should display the data for the entire date range i.e if the Trend is Month and the Date Range is Jan 2007 Jan 2008, then the table and the chart should display months from Jan 2007, Feb 2007 .... Jan 2008 irrespective of whether or not there are error codes present for that month.
In order to satisfy the point 4 mentioned above, we have created the main dataset in such a way that it would have one row for each day between Jan 2007 to Jan 2008. Any fields that do not have data corresponding to a date will come up as NULL in the dataset.
Now, we need to display a chart in the report which would be a Trend v/s the Normalized Value chart for each ECode. So, we have put in the Normalized value in the 'Value' field of the chart, Trend group in the 'Category' field of the chart and ECode in the 'Series' group of the chart. The chart displays fine except for one extra series for the NULL values in the Error Code ( the one in green below). Is there any way in which we can do away with this NULL series without changing the dataset? I tried using filters for the 'Series' but it doesn't work ( used filters like <>NULL, <> "" , <>Nothing, cstr(ECode) <> NULL/"" etc ).
Hi to everyone.I have this problem in my chart control in report.I am retrieving datas from my database.My x-axis is consist of dates of the year,y-axis is the hit counts.My problem here is when i only have hits in only one month(ex december) and almost over 20 hits are retrieved,the bars of my graph become so overcrowded and overlayed which make the value unclear to see.And also another thing is my legend repeats the color when there are too much data.is there anyway to fix this or this is just a ReportingService bug??Hope not..hehe.. Thanx
View 4 Replies View RelatedI have a report I'm writing and have got a problem that has stumped me.
The data the report is based in is in this format:
Date Type
1/1/08 A
1/3/08 B
3/1/08 C
3/5/08 B
3/10/08 A
3/12/08 C
3/20/08 A
Management wants a report showing a line chart that summarizes the data by Month and by Type. So, there are 2 series depending on the Type and data values are based on the count of each Type. So, in the example above the x-axis group would be month, the values would be count(Type) and there would be 2 series €“ Series 1. A, B and Series 2. C
I€™ve defined the x-axis to be Month(Fields!DateOccured.Value). However, they want the x-axis to show every month for the entire year not just what is in the database. So, I defined the x-axis to have a scale of 1 to 12 and the major interval is set to 1. This displays 1 through 12 on the x-axis.
The problem is when there is no data (null) for a particular month. Instead of showing 0, the line chart does not plot anything and the line is drawn to the next displayed point. So, for example on the data above the line chart would plot:
January
Series 1 €“ Qty. 2 Series 2 €“ Qty. 0
February
Null
March
Series 1 €“ Qty. 3 Series 2 €“ Qty. 2
The line chart would draw a line from January to March skipping February. I need to display the null values as 0 and not null indicating no occurrences for the month rather than no data present.
Thanks!
I can't figure out how to get my line chart to break when there isn't a value. For example, I have a trend line over 4 time periods. The 3rd time period is missing a value. Instead of the line ending at the 2nd period and picking up again at the 4th time period, it's connecting the line 2nd to the 4th period. I'd like it to break and for there to be no line appearing in the 3rd period. I bet that's as clear as mud, but let me know if you have any questions.
Thanks!
sash
I have a table that contains some data.Â
LabelName
LabelValue
TotalForRetire
10337
dummy1
0
TotalForRelatives
5850
dummy2
0
TotalForDisability
7337
TotalForOrange
23
I have a pie chart and a bar chart.
In the pie chart I want to plot only TotalForRetire and TotalForDisability and TotalForOrange
In the bar chart I want to plot only TotalForRetire,dummy1,TotalForRelatives.
Also, here I want the horizontal axis not to show the label  for dummy1 as the value is 0. How can i do that for each chart?
Currently I report our monthly fees broken down into 4 weeks per month by using 4 separate datasets with the following code
SELECT
SUM(Practice.ibvSalesByJob.JobBilledExVAT) AS Sum_JobBilledExVAT
FROM
Practice.ibvSalesByJob
INNER JOIN Practice.idvJobType
[Code] ....
The second dataset then has the date code changed toÂ
AND Practice.ibvSalesByJob.[Date] >= Cast(@Month AS char(2)) + '/08/' + Cast(@DateYear AS char(4)) + ' 00:00:01'
AND Practice.ibvSalesByJob.[Date] <= Cast(@Month AS char(2)) + '/16/' + Cast(@DateYear AS char(4)) + ' 00:00:00'
The third
AND Practice.ibvSalesByJob.[Date] >= Cast(@Month AS char(2)) + '/16/' + Cast(@DateYear AS char(4)) + ' 00:00:01'
AND Practice.ibvSalesByJob.[Date] <= Cast(@Month AS char(2)) + '/23/' + Cast(@DateYear AS char(4)) + ' 00:00:00'
The fourth
AND Practice.ibvSalesByJob.[Date] >= Cast(@Month AS char(2)) + '/23/' + Cast(@DateYear AS char(4)) + ' 00:00:01'
Now I was hoping so that I could report the above data in one chart and do an expression on the category and group the dates so I would just have one dataset like below but four separate columns saying Week 1, 2 3 and 4 and then the sum filtered in line.
SELECT
SUM(Practice.ibvSalesByJob.JobBilledExVAT) AS Sum_JobBilledExVAT
FROM
Practice.ibvSalesByJob
INNER JOIN Practice.idvJobType
[Code] ....
If I could somehow with SQL tie in all 4 separate datasets and display them as Week 1, 2, 3 and 4 underneath the dataset and selectable.An even simpler solution maybe just understanding how charts work, I can get it so I display the 4 separate weeks in the chart however I can't get the bottom line (Category Group) to display Week 1, 2, 3 and 4.
Hello,
I need to know what means are available to change the Minimum and Maximum Y-Axis scale values rather than leave them simply as they are in the properties.
Right now whatever min/max values I enter into the scale for the Y-Axis are unchangeable.
I need to be able to change the min/max scale values based on the value of the data at run time.
Any help is appreciated.
Thanks.
I am using the below expression for hidding the zero data labels in ssrs chart.=IIF(Fields!Name.Value=0,False,True). But this expression is working for some other charts. It is not wrking for only charts. I could not find the solution for that. How to hide the zero values.
View 4 Replies View RelatedAm using SQL Server 2012 and Visual Studio 2010.
The above chart has three Values in it (slightly late in pink, rather late in hot pink and very late in red). Because of the ordering of these values the red very late values can't be seen. When I shuffle the order around slightly they are indeed there:
...This report runs dynamically for one of a number of activities the user can select, as such I have no way of knowing which of these series will be at the lower end of the scale and which will be at the higher end. Is it possible to set the Values/Series to be transparent so I can be assured that all will be visible to the user at runtime?
I have a line chart which works great except when the x axis displays duplicate months. I have tried format codes of MM-YYYY and MMM and have the "numeric or time-scale values" checkbox checked. The data displays fine but the X axis in the case of the MMM format code displays as:
Sep Oct Oct Nov Nov
leaving the user to wonder where exactly does October and November start...
I've googled around but don't see off-hand what I am doing wrong. I am display 3 simultaneous lines if that matters...
Thanks!
Craig
Hello All,
I have a reporting services report in the form of a chart. I have two datafields on the chart.
I need to be able to dynamically hide one datafield and view the chart for the other one and vice versa.
How do I do this ?
Any help would be appreciated..
Thanks!
When I export the report in excel format the chart is displayed as picture. I want it to be displayed as editable chart.Does Office Writer work in this situation and did anyone use Office Writer to accomplish same type of problem.Is there any other method or product we can use instead of the office writer.
View 2 Replies View RelatedI have a report designed in SSRS 2008 R2.My issue is that the data labels do not stay outside the bars for high values.
View 4 Replies View RelatedI need to create a chart with the following features
1) Bar chart that has data for 3 years (3 series)
2) Line chart that has the same data as per the above points on the bar chart but this is a running total. (3 series)
3) These data points are for the 12 months
4) there should be a secondary axis for the cumulative one
Can I create this using the same data set?
I have a simple-column chart and in the x-axis I put the date values and in the y-axis the sale price values.
The chart works perfectly in the case when there is only one sale price for the same date. But, when the price changes during the same day, then there is problem. In the following example
x y
1/1/2007 6.25
2/1/2007 7
2/1/2007 4
3/1/2007 8
the chart will have three columns and in the date 2/1/2007 will display the min or max of the two values. What I need is to represent all the values i.e. the chart must have four columns , as much as the rows of the dataset
Is it possible?
Hi Guys..
i don't know weather is it possible or not..but Can any One tell's me How can i refresh the Chart Values.. acutally what's happening..
i have two Chart in a reprot .. One is Main Category and other one is SubCategory... acutally what i want.. in Main Category chart sum of Quantities of Subcategory values comes in bar or any other format.. and when i click on Main chart any bar it's refresh the other chart and return the result of subcategory under that main category in details...
i don't know is this possible .. acutally i m very new in reproting.. infact that's my first report.. so i want to do this.. if any article or any help anyone can provide me..
Thanks
Hi,
I am not getting Mining Accuracy Chart and Min ing Model Prediction
Plz tel me how to do.And how to use the filter input data used to generate the lift chart and
select predictable mining model columns to show in the lift chart
Hey guys,
I have a very peculiar issue going on. I have a table that contains a decimal(18,2) column called "Amount". Looking at this table through Enterprise Mgr, I can see that there are values in there that are negative. However, when I run a query in Query Analyzer, it displays all the negative values as positives.
The only workaround I've found right now is to change the column type to "real" and then change it back to decimal(18,2), and it starts showing the negatives as negative. However, without performing this absurd workaround, it doesn't work.
Is there a known bug in QA that would manifest itself as this? What is the cause for this?
Thanks in advance.