while connecting to Reporting Services from Mangament Studio getting following error
"The attempt to connect to the report server failed. Check your connection information and that the report server is a compatible version. (Microsoft.SqlServer.Management.UI.RSClient)"
any ideas???
I started this thread as the last attempt to sort the issue out.
I have an SSIS package that loads data from a .csv file into my database. It works fine on my developer machine. I start it programmatically or from Management Studio or from Visual Studio, and it works. Then I deploy it to the MSDB database on the computer on which it will have its final place. There again I can start it from Management Studio or from Visual Studio (using the source file), and it works. But when I start it programmatically, it just fails telling me:
Package Warnings:
Package Errors:
The version of component "****" (11773) is not compatible with this version of the DataFlow.
Component "component "Derived Column" (13627)" could not be created and returned error code 0x80070005. Make sure that the component is registered correctly.
The component is missing, not registered, not upgradeable, or missing required interfaces. The contact information for this component is "Flat File Source;Microsoft Corporation;Microsoft SqlServer v9; (C) 2005 Microsoft Corporation; All Rights Reserved; http://www.microsoft.com/sql/support;1".
component "Agreement File" (11773) failed validation and returned error code 0xC0048021.
One or more component failed validation.
There were errors during task validation.
Maybe the source of the problem is that this machine is a 64-bit one, while the developer machine is 32-bit one. But why does the package run fine when I start it from Management Studio?
Any help would be appreciated.
FMikee
I tried to install SQL SERVER 2005 through SQLEVAL64 (IA64) on Window vista 2007, Intel core 2 duo processor. Like many other software (including my lexmark printer driver), SQL SERVER 2005 does not seem to be working. Anyone has any work around solution or had similar experience ?
View 4 Replies View RelatedI'm currently using the evaluation version of SS2005 and would like to use PerformancePoint with Analysis Services. PerformancePoint requires the cumulative update package 3 for SQL Server 2005 Service Pack 2, or Build 3186, according to the documentation. The version for SS2005 is the following:
MSSQLSERVER
Analysis Services
[Version: 9.00.1399.06 Edition: Enterprise Evaluation Edition Patch level: 9.00.1399.06 Language: English (United States)]
The same version, patch level is repeated for all of the SS2005 components. Do I have a compatible SS2005 version for PerformancePoint.
Thanks,
Tom
Hello,
I'm trying to get the version information for my SQL servers. Specifically I want to get the major, minor, release and build numbers separately.
Does anyone know what the recommended method for doing this is?
I tried using @@microsoftversion but I can't find any documentation about it.
@@VERSION has the information in it but I'd have to parse the text, not something I want to do and it means the code can easily be broken if the format of the string changes.
xp_msver has what I need but I want to run this as a T-SQL batch so I can't access the results of xp_msver.
Just to add another restriction the code should be compatible with SQL server 2000 and, if possible SQL 7.0 (although not necessary).
Basically I have a script that I want to run on my servers that removes all users except dbo and guest from my databases. At the moment I query master.dbo.sysxlogins table but this doesn't work on 2005 so I thought I could check the version and run a different query for those servers.
Any help appreciated.
Kep.
Locally I develop in SQL server 2005 enterprise. Recently I recreated my db on the server of my hosting company (in sql server 2005 express).I basically recreated the tables and copied the data in it.I now receive the following error when I hit the DB:The 'System.Web.Security.SqlMembershipProvider' requires a
database schema compatible with schema version '1'. However, the
current database schema is not compatible with this version. You may
need to either install a compatible schema with aspnet_regsql.exe
(available in the framework installation directory), or upgrade the
provider to a newer version.I heard something about running aspnet_regsql.exe, but I dont have that access to the DB. Also I dont know if this command does anything more than creating the membership tables and filling it with some default data...Any other solutions/thought on what this can be?Thanks!
Hello everybody!I'm using ASP.NET 3.5, MSSQL 2005I bought virtual web hosting .On new user registrations i have an error =(The 'System.Web.Security.SqlMembershipProvider' requires a database schema compatible with schema version '1'. However, the current database schema is not compatible with this version. You may need to either install a compatible schema with aspnet_regsql.exe (available in the framework installation directory), or upgrade the provider to a newer version. On my virtual machine it work fine but on web hosting i have an error =(What can you propose to me?
View 2 Replies View Related
How can i get the product information otherthan Select @@Version
Thanks in advance
WillSmith
mail2willsmith@yahoo.com
I've been unsuccessful getting Reporting Services 2005 to work after reinstalling SQL 2005. The RS service cannot connect to its database, as reported in the Event Log. If I visit http://localhost/Reports, I get the error "Key not valid for use in specified state. (Exception from HRESULT: 0x8009000B)
(rsRPCError)"
I've used the RS Config Mgr to create a fresh database for it named SSRS (and SSRSTembDB), and it is set to use Service Credentials in the db connection. The RS service is running using the same admin account as MSSQL, .SQLExec. I have confirmed that .SQLExec is in the RSExecRole role in the SSRS database.
When I created the SSRS database, the Config Mgr had a green check for every step except the last. For "Setting Connection Info for the Reporting Server" there was a yellow '!', with the explanation, "Although saving the database connection succeeded, the report server cannot access internal information about this deployment to determine if the current configuration is valid for this edition. ..."
I examined rsreportserver.config to look for any issues. The <dsn> element has an encrypted string, the <ConnectionType> element says "Default", and the logon elements are empty. I could not find the db names, SSRS and SSRSTempDB, anywhere in the file. Where are these kept? I don't know what else to look for.
Also, in RS Config Mgr, the 'Encryption Keys' page has a blue '!', and only the 'Restore' and 'Delete' buttons are enabled. The 'Initialization' page has a red 'X'. The local RS is not listed (the grid is empty), and clicking the 'Initialize' button does nothing.
How can I diagnose and fix this installation?
I have multiple ODBC connection and how to check all connection automatically during routine check by using batch file.
View 5 Replies View RelatedDear all
Please help me ,
When I am giving http://localhost/reportserver in internetexplorer the followig error message is coming.
I already installed the reportserver in my machene
The version of the report server database is either in a format that is not valid, or it cannot be read. The found version is 'T.0.8.40'. The expected version is 'C.0.8.40'. To continue, update the version of the report server database and verify access rights. (rsInvalidReportServerDatabase) Get Online Help
After the error message I did the following steps
1. SQLserver configuration tool
2. Report server configuration
3. Given the machene name as SQL, instance name MSSQL
4. Given the server name, and selected the reportserver as database
5. Clicked upgraded button
6. Veryfy Database edition showed in green ticked mark
7 Veryfy database version showed as error " The databse version doesnot match ur reporting service installation. You must upgrade reporting service database "
8. After that I again clicked upgrade button but the same error message is showing ....
Please help me to solve this problem
Pegards
Polachan
How to check MDAC version.
What are the version supported for sql 7.0 cluster witn w2k sp1.
TIA
Paul
how do i check whether i have installed 64 bit /32 bit sql server 2005... if i see Program files and Program files (x86) directory can i be sure...
one more query..Is windows 2003 enterprise edition 64 bit Itanium based operating systems
Thanks in advance
I have an application that talks to a SQL backend using an ODBC DSN connection. It works fine when running on a 32bit machine but fails in the 64bit environment. The DSN is setup properly on the 64bit box and the Test Connection returns sucess. However when my application tries to use the DSN to connect to the database I recieve the following error.
IM002 - Data source name not found and no default driver specified.
The data source name does exist, it's in the ODBC.INI and in registry. As mentioned above the Test Connection succeeds in the ODBC Administrator so logic would dictate that it's setup correctly.
Any help would be appreciated.
Hey anyone,
I got a problem to check a connection whether it is established or not from my C# Application to SQL Server.
I am developing my application which can run in 2 modes:
1. Online: There must be a connection to SQL Server to get new data updates.
2. Offline: I dont need a connection to SQL Server. I set a timer to tick every 5 seconds and it will check the connection with SQL Server and my problem here: (this is my code)1 public static bool checkConnection()
2 {
3 SqlConnection conn = new SqlConnection("mydatasource");
4 try
5 {
6 conn.Open();
7 return true;
8 }
9 catch (Exception ex) { return false; }
10 }
Yes, it works but my application seems to wait about >3 seconds to get the return "False"; I tried to add "Connect TimeOut=1" in my Connection String, but the problem is still there.
I dont know whether there is a faster way to check the connection to SQL server which is established or not.
Thank you very much,
Joesy
Hi, all here,
Would anyone here please guide me how can I check the version of reporting services installed? My problem is in my virtual machine, both SQL Server and SQL Server 2005 are installed, but I can create report in the vistual studio 2005 IDE, but cant deploy it to the reporting server database, in addition, I cant connect to reporting services database in SQL Server 2005 management studio.
Is it possible to install two different versions of reporting services in the same virtual machine? Please anyone here give me some advice for that. Thanks a lot.
With best regards,
Yours sincerely,
I have created and deployed my first report. It renders fine for me and the other database admin. When others attempt to view it, we get the error
Query execution failed for data set 'periods'. (rsErrorExecutingCommand), For more information about this error navigate to the report server on the local server machine, or enable remote errors
Initially, We created a local group on the machine that hosts both the database and webserver and added the individuals to that group. Then, within SRS Report manager, we added that group to the Browswer role of the report.
The error message was slightly different, in that it couldn't even open the Datasource.
We then added an individual to the database as dbreader, and got the above message. It apprently is starting to render, and when it encounters the first query (dataset "periods", which populates a drop down list for a parameter), it chokes. BTW, the Periods dataset executes a stored procedure dbo.Period_List that has no parameters. It returns a list of reporting periods.
I could not figure out how to "enable remote errors" or find an error log on the server. The C:Program FilesMicrosoft SQL ServerMSSQL.3Reporting ServicesLogFiles Log files did not appear to record any errors.
Please advise!
When i try to restore the encrypt key to reporting service getting the below error.The version of the report server database is either in a format that is not valid, or it cannot be read. The found version is '147'. The expected version is 'C.0.9.45'I found the table in Database  called DBUpgrdaeHistory
UpgradeID DBVersion
Datetime
31 147 Â Â Â Â Â
[code]...
i want to check.. Report Server Windows service has Send As permissions on the SMTP server.
how can i do this..
Hi
I went to my comp ->rt cick->manage-IIS->default website->rt click->properties->directory security->annoymouse access€¦EDIT->under Default domain it was blank, and i added a domain there.
And i was getting error opening up the reports from localhost.
I changed everything to same as it was previosly, and I am getting the error:
The report server cannot open a connection to the report server database. A connection to the database is required for all requests and processing. (rsReportServerDatabaseUnavailable) (rsRPCError) Get Online Help
Cannot open database "ReportServer$SQLExpress" requested by the login. The login failed. Login failed for user 'NGESComputer name$'.
I installed SQL reporting services 2005 and successfully configured reporting services.After designing the report using Bussiness Intelligence Studio, i tried to deploy my reporting services application to the localhost , I got the below mentioned error :
TITLE: Microsoft Report Designer
------------------------------
A connection could not be made to the report server http://localhost/ReportServer.
------------------------------
ADDITIONAL INFORMATION:
The attempt to connect to the report server failed. Check your connection information and that the report server is a compatible version. (Microsoft.ReportingServices.Designer)
------------------------------
The request failed with HTTP status 404: Not Found. (Microsoft.ReportingServices.Designer)
Can anybody provide a solution for this issue....
Thanks in advance
Nirupa
Hi,
I am newbie and working with an application that ueses report server 2000 to make reports.
The problem is somebody has moved the database and changed some acounts and now I can not either get any report from the server or install my changes for reports. I used to run this commando to install changes for reports:
rs -i PublishGeckoReports.rss -s http://IpAddress:32808/reportserver -v definitionPath="C:TempDeploymentReportsRDL" -v targetFolder="/MyReports"
here is the error message i get when i try to install:
System.Web.Services.Protocols.SoapException: The report server cannot open a connection to the report server database. The logon failed
when I browse to http://IpAddress:32808/reportserver I get following:
The report server cannot open a connection to the report server database. The logon failed. (rsReportServerDatabaseLogonFailed) Get Online Help
Logon failure: unknown user name or bad password.
at IIS Manager for default web site Enable Anonymous Access is checked and on the database server and the web.config file use same account and password.
but I heard that somewhere there is encrypted password that i have to change it too.
I need your help
Thanks
Hi,
I got consistent error of the following:
ReportingServicesService!runningjobs!13!1/3/2007-10:45:21:: e ERROR: Error in timer Database Cleanup (NT Service) : Microsoft.ReportingServices.Diagnostics.Utilities.ReportServerDatabaseUnavailableException: The report server cannot open a connection to the report server database. A connection to the database is required for all requests and processing. ---> System.Data.SqlClient.SqlException: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
at System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject)
at System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection)
at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory)
at System.Data.SqlClient.SqlConnection.Open()
at Microsoft.ReportingServices.Library.ConnectionManager.OpenConnection()
--- End of inner exception stack trace ---
The error happens on Reporting Service version 9.00.3017.00 (the version we are running in Production). The Reporting Service and its database are actually resided in the same physical server. And the strange thing is that it does not prevent any functionalities or features working except when I launch the Management Studio on that server, it usually takes 2 minutes to load up. (any other server would just take 5 -10 seconds).
Can any one help?
Thanks!
William.
I am getting the following error, when trying to deploy. the report should point to a server which is in my network, but the report is on my machine. where i am trying to deploy locally but point to a different machine.
******************************************************
The report server cannot open a connection to the report server database. A connection to the database is required for all requests and processing.
***********************************
Thank you very much for the information.
Hello,
View 14 Replies View RelatedHi, all here,
I use SQL Server 2005 standard edition ,
I choose to use table(table stored in Oracle9i) as source for mining structure, and I use
Oracle Provider for OLE DB(or Microsoft OLE DB Provider for Oracle).I set one column as logic key and this column stored chinese data.Deployment was successful. When I processed the mining structure,
an error happened:
Warning 0x80202066:Data Flow Task :Connot retieve the column code page info from OLE DB provider.If the comopenent supports the "DefaultCodePage" property,the code page from that property will be used .Change the value of the property if the current string code page values are incorrect. If the component does not support the property, the code page from the component's locale ID will be used.
But I created the same mining stucture and processed it successfully in SQL Server 2000. Is it a Compatible bug in SQL Server 2005？
I've defined a System DSN (and it works just fine for the classic ASP web site) and for a separate project I would very much like to determine what server its connecting to.
My environment is .Net 2.0.
On some boxes, the DSN is configured to connect to SQL Server "George" and on others it's configured to connect with "Carl." Both servers have a database named Lighhouse, I want to connect to another DB using the newer SQLConnection/SQLCommand objects. Which, don't support and ODBC DSN in the connection string. However, when constructing my connection string I need to connect to the same server that's defined in the DSN.
Is there a way extract the information from the DSN?
I'm trying to convert a 6.5 compatible db from SQL Server 2000 to SQL Server 2005. The issue I'm encountering is that:
1. I cannot simply convert the 6.5 compatible db to SQL Server 2005. I tried restoring from a backup - no success.
2. I tried creating the structure in SQL Server 2005 and then importing the data from SQL Server 2000. Problem is - after importing the data, I then tried creating the primary key and indexes - get a time-out error (which I never got with SQL Server 2000.) I also tried creating the primary key and indexes in SQL Server 2005 FIRST before importing - got errors when trying to import and import failed.
I know this sounds like a data problem but I have no problems working with this 3 gig database in SQL Server 2000.
Can anyone please help? This is a pretty serious problem I need to overcome with the SQL Server 2005 conversion.
Is there any way to restore a database of higher version to lower version.
E.g. I have created a database in sql server 2012, created some tables & procedures in that.I took Full backup of that database. Can I restore it to sql 2008r2 or any lower version.
I know direct restore is not possible, I have to use either import or export option or generating script,but i want to know is there any easy step to do so.
Vimal Lohani
SQL DBA | MCP (70-461,70-462)
Hi all,
Since some analysis services features are only available in Enterprise version , I have to upgrade my SQL 2005 server from standard edition to enterpise edition.
So I uninstall originial standard version of analysis service and install a Enterprise version. However, the analysis service is still a standard version after installation.
Is it possible to keep data engine as standard version and install a enterprise version of analysis service?
Thank you very much
Tony
Hello,I have been searching and reading a lots of information on the microsoft website about the different version of SQL server, but still can not make my decision.In term of performance, is there a real big difference between the workgroup and the standard version? The workgroup is limited to 3 GB of RAM while the standard is unlimited, would that really change the performance if my server has 16Gb or RAM?The price difference is pretty substantial so if could only have to buy the workgroup , it would be better.One more question, regarding the type of licence, my server has 2 processors, could I avoid buying 2 licences and get the Server plus CAL instead. I am using this server to host 4 web-application running on SQL server. Each database is about 15 MB.Thanks in adavance for your advises.Arno
View 3 Replies View RelatedI am wondering if it is possible to change from SQL Server Enterprise Evaluation Version to Developer Version. The reason is because the Enterprise Evaluation version expires after 180 days. So if I create reports and cubes in Enterprise Evaluation I can import them into Developer Edition right? Should I remove the Enterprise Evaluation version after 180 days or leave it then install Developer Edition?
View 1 Replies View RelatedHi,
I have tried to attatch a database ,created by SQL server Express within a C# application , in SQL server 2005 Enterprise edition, but the following error message appears:
-----------------------------
TITLE: Microsoft SQL Server Management Studio
------------------------------
Attach database failed for Server 'MEDO'. (Microsoft.SqlServer.Smo)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft SQL Server&ProdVer=9.00.1187.00&EvtSrc=Microsoft.SqlServer.Management.Smo.ExceptionTemplates.FailedOperationExceptionText&EvtID=Attach database+Server&LinkId=20476
------------------------------
ADDITIONAL INFORMATION:
An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.ConnectionInfo)
------------------------------
The database 'E:X.MDF' cannot be opened because it is version 611. This server supports version 607 and earlier. A downgrade path is not supported.
Could not open new database 'E:X.MDF'. CREATE DATABASE is aborted. (Microsoft SQL Server, Error: 948)
------------------------------
so , how can I solve this problem , I need to reed the data resides in the tables of 'X' database , how can I do it?? please help me.
Thanks in advance for any help.
Aya.