Checkboxes, Bit Data Type And Indexes

Sep 27, 2005

I have checkboxes in an application. They are used in indexes. I started adding them as bit-type columns, but they aren't available in indexes. Should I use tinyint instead?

View 12 Replies


ADVERTISEMENT

How To Populate Checkboxes Based On SQL Data?

Dec 16, 2003

I apologize about the newbie-ness of these questions, but I am a total newbie (I have used VB for a while but this is my first 5 hours with ASP ever).

I just asked how to populate dropdowns, which I have found out how to do, but this question is quite a bit more difficult for me.

I have a SQL database, and in that database is a table, with a few columns. The first columnis a list of user id's, and the second is list of "options".

I want to make it on my webpage so that if the userid matches the column1 data, then it will display a checkbox for the column 2 option. Ie, if its "USERID1,OPTION1" in the SQL table, then if userID = "USERID1" then it will make an checkbox with caption/name "OPTION1". It has to loop through all the rows in the SQL table and make all the checkboxes for these options that match.

I have no idea how to do this, any help would be great.

View 1 Replies View Related

Index Creation Causes Error The Conversion Of A Char Data Type To A Datetime Data Type Resulted...

Jul 23, 2005

Hi all,I have a table called PTRANS with few columns (see create script below).I have created a view on top that this table VwTransaction (See below)I can now run this query without a problem:select * from dbo.VwTransactionwhereAssetNumber = '101001' andTransactionDate <= '7/1/2003'But when I create an index on the PTRANS table using the command below:CREATE INDEX IDX_PTRANS_CHL# ON PTRANS(CHL#)The same query that ran fine before, fails with the error:Server: Msg 242, Level 16, State 3, Line 1The conversion of a char data type to a datetime data type resulted inan out-of-range datetime value.I can run the same query by commeting out the AssetNumber clause and itworks fine. I can also run the query commenting out the TransactionDatecolumn and it works fine. But when I have both the conditions in theWHERE clause, it gives me this error. Dropping the index solves theproblem.Can anyone tell me why an index would cause a query to fail?Thanks a lot in advance,AmirCREATE TABLE [PTRANS] ([CHL#] [varchar] (100) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,[CHCENT] [numeric](2, 0) NOT NULL ,[CHYYMM] [numeric](4, 0) NOT NULL ,[CHDAY] [numeric](2, 0) NOT NULL ,[CHTC] [char] (2) COLLATE SQL_Latin1_General_CP1_CI_AS NOT NULL) ON [PRIMARY]GOCREATE VIEW dbo.vwTransactionsASSELECT CONVERT(datetime, dbo.udf_AddDashes(REPLICATE('0', 2 -LEN(CHCENT)) + CONVERT(varchar, CHCENT) + REPLICATE('0', 4 -LEN(CHYYMM))+ CONVERT(varchar, CHYYMM) + REPLICATE('0', 2 -LEN(CHDAY)) + CONVERT(varchar, CHDAY)), 20) AS TransactionDate,CHL# AS AssetNumber,CHTC AS TransactionCodeFROM dbo.PTRANSWHERE (CHCENT <> 0) AND (CHTC <> 'RA')*** Sent via Developersdex http://www.developersdex.com ***Don't just participate in USENET...get rewarded for it!

View 1 Replies View Related

System.Data.SqlClient.SqlException: The Conversion Of A Char Data Type To A Datetime Data Type Resulted In An Out-of-range Datetime Value.

Dec 14, 2005

After testing out the application i write on the local pc. I deploy it to the webserver to test it out. I get this error.

System.Data.SqlClient.SqlException: The conversion of a char data type to a
datetime data type resulted in an out-of-range datetime value.

Notes: all pages that have this error either has a repeater or datagrid which load data when page loading.

At first I thought the problem is with the date, but then I can see
that some other pages that has datagrid ( that has a date field) work
just fine.

anyone having this problem before?? hopefully you guys can help.

Thanks,

View 4 Replies View Related

Converting A Data Type Double To A Type Float Using A Data Adapter &&amp; SSCE 3.5

Feb 13, 2008

Hi,

I can populate a dataTable with type double (C#) of say '1055.01' however when I save these to the CE3.5 database using a float(CE3.5) I lose the decimal portion. The 'offending' code is:


this.court0TableAdapter1.Update(this.mycourtsDataSet1.Court0);

this.mycourtsDataSet1.AcceptChanges();

this.court0TableAdapter1.Fill(this.mycourtsDataSet1.Court0);


This did not happen with VS2005/CE3.01.

I have tried changing all references to decimal (or money in CE3.5) without luck.

I'm beginning to think that string may be the way to go!!!!!!!

Can someone shed some light on my problem.

Thanks,

Later:

It's necessary to update the datatable adapter as the 3.01 and 3.5 CE are not compatible.

View 4 Replies View Related

COnverting Numeric Data Type (Oracle) To Date Data Type Using SSIS

Mar 7, 2007

We have some columns in a table where the date is stored as 19980101 (YYYYMMDD). The data type for this column is NUMBER(8) in Oracle.

I need to copy rows from Oracle to SQL Server using SSIS. I used the Data Conversion transformation editor to change it to DT_DATE, but the rows are not being inserted to the destination.

On Error, If I fail the component, then the error is :

There was an error with input column "ORDER_DATE_CONV" (1191) on input "OLE DB Destination Input" (29). The column status returned was: "Conversion failed because the data value overflowed the specified type.".

Regards

RH

View 3 Replies View Related

Check Checkboxes

Jul 6, 2007

Hi,
 I have two web pages in one web page i have 5 check boxes. For example if the user checks the Checkbox1, checkbox2 and clicks on button.
On the button click I am storing the selected checkboxes value in database lke the following:
Year     Options
xxx         1
xxx        2
in the above format( user selectes checbox1, check box 2).
And in the Second Web page I am showing the 5 checkboxes but in this web page I need to check the first and second checkboxes on the page load because user selectes those two check boxes in the first web page.
my select query returning the results like this:
Options
1
2
based on options I have to check those corresponding check boxes in the second web page.
How to achive this.
Thanks in advance

View 2 Replies View Related

Dynamic Sql Using Checkboxes!!! Tricky!

Mar 26, 2008

I have a page that is full of checkboxes, I have tried at least twenty different ways of getting this to work, but to no avail. I want when someone checks a box, that the inputs that were checked to be included in the SELECT statement in the SQL. It's kinda like unknown variables in the statement. What I want is SELECT "checkbox values" FROM TableData. How do I get the user to be able to choose the columns they want pulled from the database. Its all in one table. Here is what i have.

<cfinput type="checkbox" name="Selected" value="firstname">
<cfinput type="checkbox" name="Selected" value="lastname">
<cfinput type="checkbox" name="Selected" value="email">

Can anyone point me in the right direction of the sql syntax or procedures which I'm not good at, to use to accomplish this?

View 4 Replies View Related

Checkboxes In Reporting Services?

Apr 26, 2007

Hi all

Is it possible to have a checkbox as a parameter.. So a user can check a box to include a column or uncheck to hide a column ?

Thanks
Neil

View 6 Replies View Related

The Conversion Of A Char Data Type To A Datetime Data Type!!

May 13, 2008

hello all .. I have a form that includes two textboxes (Date and Version) .. When I try to insert the record I get the following error message .. seems that something wrong with my coversion (Data type)"The conversion of a char data type to a datetime data type resulted in an out-of-range datetime value.The statement has been terminated."
 
in my SQL database I have the date feild as datetime and the version as nvarchar(max)
this is the code in the vb page .. Can you please tell me how to solve this problem?Imports System.Data.SqlClient
Imports system.web.configuration

Partial Class Admin_emag_insert
Inherits System.Web.UI.Page

Protected Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load
Record_DateTextBox.Text = DateTime.Now

End Sub

Protected Sub clearButton_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles clearButton.Click
Me.VersionTextBox.Text = ""
End Sub

Protected Sub addButton_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles addButton.Click
Dim objConnection As SqlConnection
Dim objDataCommand As SqlCommand
Dim ConnectionString As String
Dim record_date As Date
Dim version As String
Dim emagSQL As String

'save form values in variables
record_date = Record_DateTextBox.Text
version = VersionTextBox.Text

ConnectionString = WebConfigurationManager.ConnectionStrings("HRDBConnectionString").ConnectionString

'Create and open the connection
objConnection = New SqlConnection(ConnectionString)
objConnection.Open()
emagSQL = "Insert into E_Magazine (Record_Date, Version ) " & _
"values('" & record_date & "','" & version & "')"

'Create and execute the command
objDataCommand = New SqlCommand(emagSQL, objConnection)
objDataCommand.ExecuteNonQuery()
objConnection.Close()

AddMessage.Text = "A new emagazine was added successfully"

Me.VersionTextBox.Text = ""

End Sub
End Class
 

View 10 Replies View Related

Converting Numeric Data Type To Text Data Type

Jul 20, 2005

Hi,I would like to convert a dollar amount ($1,500) to represent Fifteenhundred dollars and 00/100 cents only for SQL reporting purposes. Isthis possible and can I incorporate the statement into an existingleft outer join query.Thanks in advance,Gavin

View 1 Replies View Related

Changing User Defined Data Type's Data Type

Sep 12, 2006

Hi,



I have a user defined data type which is called DEmployeeName,

it's length is varchar(20), how do i change it into varchar(30) without droping it?

I'm using SQL server 2005.

Thanks in advance..

View 1 Replies View Related

Convert Text Data Type To Smalldatetime Data Type

Oct 9, 2007

I have a field that is currently stored as the data type nvarchar(10), and all of the data in this field is in the format mm/dd/yyyy or NULL. I want to convert this field to the smalldatetime data type. Is this possible?
I've tried to use cast in the following way, (rsbirthday is the field name, panelists is the table), but to no avail.


SELECT rsbirthday CAST(rsbirthday AS smalldatetime)

FROM panelists


the error returned is "incorrect syntax near 'rsbirthday'.

I'm rather new to all things SQL, so I only have the vaguest idea of what I'm actually doing.

Thanks for the help!

View 10 Replies View Related

Multi-select Dropdownlist With Checkboxes

Feb 12, 2007

When creating a windows forms report (rdl), multi-value parameters are rendered with a nice drop down list with check boxes...including a (Select All) item. When you run this via a report server and render the report for the web, the multi-value selection shows up nicely.

Can I create a similar web form dropdownlist so I can duplicate the functionality with an RDLC report?

Jim

View 3 Replies View Related

Getting Error : : The Conversion Of A Char Data Type To A Datetime Data Type Resulted In An Out-of-range Datetime Value

Jan 28, 2008

update tblPact_2008_0307 set student_dob = '30/01/1996' where student_rcnumber = 1830when entering update date in format such as ddmmyyyyi know the sql query date format entered should be in mmddyyyy formatis there any way to change the date format entered to ddmmyyyy in sql query?

View 5 Replies View Related

Sqlbulkcopy Error : The Given Value Of Type SqlDecimal From The Data Source Cannot Be Converted To Type Decimal Of The Specified

Apr 16, 2008

Hi,

The table in SQL has column Availability Decimal (8,8)

Code in c# using sqlbulkcopy trying to insert values like 0.0000, 0.9999, 29.999 into the field Availability
we tried the datatype float , but it is converting values to scientific expressions€¦(eg: 8E-05) and the values displayed in reports are scientifc expressions which is not expected
we need to store values as is


Error:
base {System.SystemException} = {"The given value of type SqlDecimal from the data source cannot be converted to type decimal of the specified target column."}

"System.InvalidOperationException: The given value of type SqlDecimal from the data source cannot be converted to type decimal of the specified target column. ---> System.InvalidOperationException: The given value of type SqlDecimal from the data source cannot be converted to type decimal of the specified target column. ---> System.ArgumentException: Parameter value '1.0000' is out of range.
--- End of inner exception stack trace ---
at System.Data.SqlClient.SqlBulkCopy.ConvertValue(Object value, _SqlMetaData metadata)
--- End of inner exception stack trace ---
at System.Data.SqlClient.SqlBulkCopy.ConvertValue(Object value, _SqlMetaData metadata)
at System.Data.SqlClient.SqlBulkCopy.WriteToServerInternal()
at System.Data.SqlClient.SqlBulkCopy.WriteRowSourceToServer(Int32 columnCount)
at System.Data.SqlClient.SqlBulkCopy.WriteToServer(DataTable table, DataRowState rowState)
at System.Data.SqlClient.SqlBulkCopy.WriteToServer(DataTable table)
at MS.Internal.MS
COM.AggregateRealTimeDataToSQL.SqlHelper.InsertDataIntoAppServerAvailPerMinute(String data, String appName, Int32 dateID, Int32 timeID) in C:\VSTS\MXPS Shared Services\RealTimeMonitoring\AggregateRealTimeDataToSQL\SQLHelper.cs:line 269"


Code in C#

SqlBulkCopy bulkCopy = new SqlBulkCopy(sqlConnection, SqlBulkCopyOptions.Default);
DataRow dr;
DataTable dt = new DataTable();
DataColumn dc;

try
{

dc = dt.Columns.Add("Availability", typeof(decimal));
€¦.

dr["Availability"] = Convert.ToDecimal(s[2]); ------ I tried SqlDecimal
€¦€¦€¦.

}
bulkCopy.DestinationTableName = "dbo.[Tbl_Fact_App_Server_AvailPerMinute]";
bulkCopy.WriteToServer(dt);



thx



View 8 Replies View Related

Bulk Insert Task Failing On Data Type Conversion For A Destination Column Of Type Bit

Jul 6, 2006

I am trying to use the Bulk Insert Task to load from a csv file. My final column is a bit that is nullable. My file is an ID column that is int, a date column that is mm/dd/yyy, then 20 columns that are real, and a final column that is bit. I've tried various combinations of codepage and datafiletype on my task component. When I have RAW with Char, I get the error included below. If I change to RAW/Native or codepage 1252, I don't have an issue with the bit; however, errors start generating on the ID and date columns.

I have tried various data type settings on my flat file connection, too. I have tried DT_BOOL and the integer datatypes. Nothing seems to work.

I hope someone can help me work through this.

Thanks in advance,

SK



SSIS package "Package3.dtsx" starting.

Error: 0xC002F304 at Bulk Insert Task, Bulk Insert Task: An error occurred with the following error message: "Cannot fetch a row from OLE DB provider "BULK" for linked server "(null)".The OLE DB provider "BULK" for linked server "(null)" reported an error. The provider did not give any information about the error.The bulk load failed. The column is too long in the data file for row 1, column 24. Verify that the field terminator and row terminator are specified correctly.Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 1, column 23 (cancelled).".

Error: 0xC002F304 at Bulk Insert Task 1, Bulk Insert Task: An error occurred with the following error message: "Cannot fetch a row from OLE DB provider "BULK" for linked server "(null)".The OLE DB provider "BULK" for linked server "(null)" reported an error. The provider did not give any information about the error.The bulk load failed. The column is too long in the data file for row 1, column 24. Verify that the field terminator and row terminator are specified correctly.Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 1, column 23 (cancelled).".

Task failed: Bulk Insert Task 1

Task failed: Bulk Insert Task

Warning: 0x80019002 at Package3: The Execution method succeeded, but the number of errors raised (2) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.

SSIS package "Package3.dtsx" finished: Failure.

View 5 Replies View Related

The Conversion Of A Char Data Type To A Datetime Data Type Resulted In An Out-of-range Datetime Value.

Apr 19, 2008

Advance thanks ....... My table is  TimeSheet:-----------------------------------  CREATE TABLE [dbo].[TimeSheet](    [autoid] [int] IDENTITY(1,1) NOT NULL,    [UserId] [int] NOT NULL,    [starttime] [datetime] NOT NULL,    [endtime] [datetime] NOT NULL,    [summary] [nvarchar](50) NOT NULL,    [description] [nvarchar](50) NULL,    [dtOfEntry] [datetime] NOT NULL,    [Cancelled] [bit] NULL) ON [PRIMARY] My Query is------------------ insert into timesheet (UserId, StartTime,EndTime, Summary, Description,DtOfEntry) values (2, '19/04/2008 2:05:06 PM', '19/04/2008 2:05:06 PM', '66', '6666','19/04/2008 2:05:06 PM')i m not able to insert value Error Message is-------------------------Msg 242, Level 16, State 3, Line 1The conversion of a char data type to a datetime data type resulted in an out-of-range datetime value.The statement has been terminated. can any body give any solution  

View 5 Replies View Related

The Conversion Of A Char Data Type To A Datetime Data Type Resulted In An Out-of-range Datetime Value.

Aug 3, 2005

Hey, I have a big problem that i wanna search data from SQL by DateTime like thatselect * from test where recorddate='MyVariableWhichHoldDate'i use variable that holds Date info.i searched a lot infomation on net but there is no perfect solution. i know why this occur but there is no function to solve this problem. i used a lot of ways. it accept yyyy-mm-dd format but my variable format is dd-mm-yyyyy . is there any function for this problem? and any other solution.thanks for ur attentionregards

View 6 Replies View Related

The Conversion Of Char Data Type To Smalldatetime Data Type Resulted In An Out-of-range Smalldatetime Value

Mar 30, 2007

I am using Visual Studio 2005 and SQL Express 2005. The database was converted from MS Access 2003 to SQL Express by using the upsize wizard.



I would like to store the current date & time in a column in a table. This column is a smalldatetime column called 'lastlogin'.

The code I'm using is:



Dim sqlcommand As New SqlCommand _

("UPDATE tableXYZ SET Loggedin = 'True', LastLogin = GetDate() WHERE employeeID = '" & intEmployeeID.ToString & "'", conn)



Try

conn.Open()

sqlcommand.ExecuteNonQuery()

conn.Close()

Catch ex As Exception

MessageBox.Show(ex.Message)

End Try



This code works fine on my local machine and local SQL server. However at the client side this code results in the error as mentioned in the subject of this thread. I first used 'datetime.now' instead of 'getdate()', but that caused the same error. Then I changed the code to 'getdate()', but the error still remains.



The server at the client is running Windows Server 2000 UK . My local machiine is running WIndows XP Dutch.

Maybe the conversion from Dutch to UK has something to do with it. But this should be solved by using the 'Getdate()' function..... ?













View 1 Replies View Related

SQL Server Admin 2014 :: I/O And Processor Affinity Checkboxes Disabled

Aug 21, 2015

On NumaNode1 and NumaNode3. I can see all of the CPU's there but the checkboxes are disabled.

What could be disabling these?

View 4 Replies View Related

Connection Type Limitations When Using XML Data Type In SQL Task

Jul 23, 2007

I'm trying to use the SSIS Execute SQL Task to pull XML from a SQL 2005 database table. The SQL is of the following form:




SELECT
(



SELECT
MT.MessageId 'MessageId',
MT.MessageType 'MessageType',
FROM MessageTable MT
ORDER BY MT.messageid desc
FOR XML PATH('MessageStatus'), TYPE


)
FOR XML PATH('Report'), TYPE

For some reason I can only get this query to work if I use an ADO.NET connection type. If I try to use something like the OLEDB connection I get the following error:



<ROOT><?MSSQLError HResult="0x80004005" Source="Microsoft XML Extensions to SQL Server" Description="No description provided"?></ROOT>



Can anyone tell me why the SELECT ... FOR XML PATH... seems only to work with ADO.NET connections?



Thanks

Walter

View 1 Replies View Related

Transact SQL :: Key And Indexes On Two Column Data Table Or Parsed View (Large String Of Data And Filename)

Oct 4, 2015

I am studying indexes and keys. I have a table that has a fixed width of data to be loaded in the first column which is parsed in a view based on data types within the fixed width specifications.

Example column A:
(name phone house cost of house,zipcodecountystatecountry)
-a view will later split this large varchar string based 
column b: is the source filename of the data load (varchar 256)
....

a. would there be a benefit of adding a clustered or nonclustered index (if so which/point in direction on why)

b. is there benefit of making one of these two columns a primary key (millions of records) or for adding a 3rd new column as a pk?

c. view: this parses the data in column a so it ends up looking more like "name phone house cost of house zipcode county state country" each having their own column.

-any pros/cons of adding indexes (if so which) to the view instead of the tables or both for once the data is parsed?

View 4 Replies View Related

Can't Install SQL Server 2005 Enterprise Edition On Vista Business Because The Component Checkboxes Are Grey

Oct 27, 2007

Hi,
Is there any one knows how to fix this, please help! This is urgent.
In the configuration checking, there was only one warning message about operation system (this warning should be ignored according to some advice). When coming to the Component checkboxes, there is only one checkboxe checkable at the last item.
Thanks!

View 6 Replies View Related

SqlDataSource.Select Error: Unable To Cast Object Of Type 'System.Data.DataView' To Type 'System.String'.

Oct 19, 2006

I am trying to put the data from a field in my database into a row in a table using the SQLDataSource.Select statement. I am using the following code: FileBase.SelectCommand = "SELECT Username FROM Files WHERE Filename = '" & myFileInfo.FullName & "'" myDataRow("Username") = CType(FileBase.Select(New DataSourceSelectArguments()), String)But when I run the code, I get the following error:Server Error in '/YorZap' Application. Unable to cast object of type 'System.Data.DataView' to type 'System.String'. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.InvalidCastException: Unable to cast object of type 'System.Data.DataView' to type 'System.String'.Source Error: Line 54: FileBase.SelectCommand = "SELECT Username FROM Files WHERE Filename = '" & myFileInfo.FullName & "'"
Line 55: 'myDataRow("Username") = CType(FileBase.Select(New DataSourceSelectArguments).GetEnumerator.Current, String)
Line 56: myDataRow("Username") = CType(FileBase.Select(New DataSourceSelectArguments()), String)
Line 57:
Line 58: filesTable.Rows.Add(myDataRow)Source File: D:YorZapdir_list_sort.aspx    Line: 56 Stack Trace: [InvalidCastException: Unable to cast object of type 'System.Data.DataView' to type 'System.String'.]
ASP.dir_list_sort_aspx.BindFileDataToGrid(String strSortField) in D:YorZapdir_list_sort.aspx:56
ASP.dir_list_sort_aspx.Page_Load(Object sender, EventArgs e) in D:YorZapdir_list_sort.aspx:7
System.Web.Util.CalliHelper.EventArgFunctionCaller(IntPtr fp, Object o, Object t, EventArgs e) +13
System.Web.Util.CalliEventHandlerDelegateProxy.Callback(Object sender, EventArgs e) +45
System.Web.UI.Control.OnLoad(EventArgs e) +80
System.Web.UI.Control.LoadRecursive() +49
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +3743
Version Information: Microsoft .NET Framework Version:2.0.50727.42; ASP.NET Version:2.0.50727.210 Please help me!

View 3 Replies View Related

Unable To Cast COM Object Of Type 'System.__ComObject' To Class Type 'System.Data.SqlClient.SqlConn

May 17, 2006

Dear all,

I am stuck with a SSIS package and I can€™t work out. Let me know what steps are the correct in order to solve this.
At first I have just a Flat File Source and then Script Component, nothing else.

Error:





[Script Component [516]] Error: System.InvalidCastException: Unable to cast COM object of type 'System.__ComObject' to class type 'System.Data.SqlClient.SqlConnection'. Instances of types that represent COM components cannot be cast to types that do not represent COM components; however they can be cast to interfaces as long as the underlying COM component supports QueryInterface calls for the IID of the interface. at Microsoft.SqlServer.Dts.Pipeline.ScriptComponentHost.HandleUserException(Exception e) at Microsoft.SqlServer.Dts.Pipeline.ScriptComponentHost.AcquireConnections(Object transaction) at Microsoft.SqlServer.Dts.Pipeline.ManagedComponentHost.HostAcquireConnections(IDTSManagedComponentWrapper90 wrapper, Object transaction)



Script Code (from Script Component):



' Microsoft SQL Server Integration Services user script component
' This is your new script component in Microsoft Visual Basic .NET
' ScriptMain is the entrypoint class for script components

Imports System
Imports System.Data.SqlClient
Imports System.Math
Imports Microsoft.SqlServer.Dts.Pipeline.Wrapper
Imports Microsoft.SqlServer.Dts.Runtime.Wrapper


Public Class ScriptMain
Inherits UserComponent


Dim nDTS As IDTSConnectionManager90
Dim sqlConnecta As SqlConnection
Dim sqlComm As SqlCommand
Dim sqlParam As SqlParameter


Public Overrides Sub Input0_ProcessInputRow(ByVal Row As Input0Buffer)

Dim valorColumna As String
Dim valorColumna10 As Double


valorColumna = Row.Column9.Substring(1, 1)

If valorColumna = "N" Then
valorColumna10 = -1 * CDbl(Row.Column10 / 100)
Else
valorColumna10 = CDbl(Row.Column10 / 100)
End If

Me.Output0Buffer.PORCRETEN = CDbl(Row.Column11 / 100)
Me.Output0Buffer.IMPRETEN = CDbl(Row.Column12 / 100)
Me.Output0Buffer.EJERCICIO = CInt(Row.Column2)
Me.Output0Buffer.CODPROV = CInt(Row.Column7)
Me.Output0Buffer.MODALIDAD = CInt(Row.Column8)
Me.Output0Buffer.NIFPERC = CStr(Row.Column3)
Me.Output0Buffer.NIFREP = CStr(Row.Column4)
Me.Output0Buffer.NOMBRE = CStr(Row.Column6)
Me.Output0Buffer.EJERDEV = CDbl(Row.Column13)

With sqlComm
.Parameters("@Ejercicio").Value = CInt(Row.Column2)
.Parameters("@NIFPerc").Value = CStr(Row.Column3)
.Parameters("@NIFReP").Value = CStr(Row.Column4)
.Parameters("@Nombre").Value = CStr(Row.Column6)
.Parameters("@CodProv").Value = CInt(Row.Column7)
.Parameters("@Modalidad").Value = CInt(Row.Column8)
.Parameters("@ImpBase").Value = valorColumna10
.Parameters("@PorcReten").Value = CDbl(Row.Column11 / 100)
.Parameters("@ImpReten").Value = CDbl(Row.Column12 / 100)
.Parameters("@EjerDev").Value = CDbl(Row.Column13)

.ExecuteNonQuery()
End With


End Sub
Public Overrides Sub AcquireConnections(ByVal Transaction As Object)

Dim nDTS As IDTSConnectionManager90 = Me.Connections.TablaMODELO80
sqlConnecta = CType(nDTS.AcquireConnection(Nothing), SqlConnection)

End Sub
Public Overrides Sub PreExecute()

sqlComm = New SqlCommand("INSERT INTO hac_modelo180(Ejercicio,NIFPerc,NIFReP,Nombre,CodProv,Modalidad,ImpBase,PorcReten,ImpReten,EjerDev) " & _
"VALUES(@Ejercicio,@NIFPerc,@NIFReP,@Nombre,@CodProv,@Modalidad,@ImpBase,@PorcReten,@ImpReten,@EjerDev)", sqlConnecta)
sqlParam = New SqlParameter("@Ejercicio", Data.SqlDbType.SmallInt)
sqlComm.parameters.add(sqlParam)
sqlParam = New SqlParameter("@NIFPerc", Data.SqlDbType.Char)
sqlComm.parameters.add(sqlParam)
sqlParam = New SqlParameter("@NIFReP", Data.SqlDbType.Char)
sqlComm.parameters.add(sqlParam)
sqlParam = New SqlParameter("@Nombre", Data.SqlDbType.VarChar)
sqlComm.parameters.add(sqlParam)
sqlParam = New SqlParameter("@CodProv", Data.SqlDbType.TinyInt)
sqlComm.parameters.add(sqlParam)
sqlParam = New SqlParameter("@Modalidad", Data.SqlDbType.SmallInt)
sqlComm.parameters.add(sqlParam)
sqlParam = New SqlParameter("@ImpBase", Data.SqlDbType.Decimal)
sqlComm.parameters.add(sqlParam)
sqlParam = New SqlParameter("@PorcReten", Data.SqlDbType.Decimal)
sqlComm.parameters.add(sqlParam)
sqlParam = New SqlParameter("@ImpReten", Data.SqlDbType.Decimal)
sqlComm.parameters.add(sqlParam)
sqlParam = New SqlParameter("@EjerDev", Data.SqlDbType.Decimal)
sqlComm.Parameters.Add(sqlParam)

End Sub


Public Sub New()

End Sub
Public Overrides Sub ReleaseConnections()
nDts.ReleaseConnection(sqlConnecta)
End Sub

Protected Overrides Sub Finalize()
MyBase.Finalize()
End Sub
End Class







Thanks a lot for your help


View 13 Replies View Related

@PARAM1 : Unable To Cast Object Of Type 'System.Data.SqlTypes.SqlInt32 To Type System.IConvertable

Apr 23, 2007

I get the following message in the vs2005 querybuilder when i do a preview:



***********************************
SQL Execution Error.

Executed SQL statement: SELECT Schoolindex, Variant, VVSchool, [index], indincl, VVRuimtes, School FROM School WHERE (Schoolindex = @PARAM1)



Error Source: SQL Server Compact Edition ADO.NET Data Provider


Error Message: @PARAM1 : Unable to cast object of type 'System.Data.SqlTypes.SqlInt32 to type System.IConvertable'.
****************************************

The same querypreview works fine without the parameter:



SELECT Schoolindex, Variant, VVSchool, [index], indincl, VVRuimtes, School FROM School WHERE (Schoolindex = 186)



Can anybody tell me why this is?
And tell me a way to get the tableadapter working?



Anne-Jan Tuinstra

View 3 Replies View Related

Removal Of Selected Indexes / Script Index Create For List Of Indexes

Jul 1, 2014

I'm working to improve performance on a database I've inherited, and there are several thousand indexes. I've got a list of ones which should definitely exist within the database, and I'm looking to strip out all the others and start fresh, though this list is still quite large (1000 or so).

Is there a way I can remove all the indexes that are not in my list without too much trouble? I.e. without having to manually go through them all individually. The list is currently in a csv file.

I'm looking to either automate the removal of indexes not in the list, or possibly to generate the Create statements for the indexes on the list and simply remove all indexes and then run these statements.

As an aside, when trying to list all indexes in the database, I've found various scripts to do this, but found they all seem to produce differing results. What is the best script to list all indexes?

View 5 Replies View Related

Indexes On Bulk Insert Data

Jul 20, 2005

Any help would be appreciated.I am running a script that does the following in succession.1-Drop existing database and create new database2-Defines tables, stored procedures and functions in the database3-Imports data using bulk insert4-Analyzes data using stored proceduresI would like to improve the performance of the analysis in step 4 bycreating indexes in step 2.Question 1-Are indexes updated when data is bulk inserted? I know they arewhen using normal insert, update, or delete T-SQL but I am not sure aboutbulk insert of data.Question 2-Do I need to update the index statistics in any way or would theybe ready to use in step 4.Thanks,CJ

View 2 Replies View Related

How To Capture Data And Tune Indexes With Wizard

Jul 7, 1999

I want to tune the indexes on my database and I am trying to use the SQL Server Profiler to collect data for the Index tuning wizard to analyze. My question is what do I need to trace with the profiler so that the Index tuning wizard can work? I am looking at the trace properties in Profiler at the Events, Data Columns, and Filters tabs but I have no idea of what I need to capture.

Thanks in advance.

Mike

View 1 Replies View Related

Sql 2005 Import Data (indexes Missing)

Mar 12, 2007

In 2000 i could import and select all objects and get the indexes as well but with 2005 i dont seem to be able to find any such option.
how do i import data and get the indexes as well?

View 1 Replies View Related

Indexes Being Improperly Used When Selecting Data Through A View

Nov 23, 2005

I am having a problem with indexes on specific tables. For some reasona query that runs against a view is not selecting the correct index ona table. I run the same query against the table directly and it looksfine. Can anyone give me some insight? Thanks.PRODUCTION1:CREATE TABLE MyTest1 (ID INT IDENTITY(1,1), COLUMN1 CHAR(10), COLUMN2CHAR(10))CREATE CLUSTERED INDEX IDX_MyTest1 ON MyTest1 ON (ID)CREATE NONCLUSTERED INDEX IDX_MyTest2 ON MyTest1 ON (COLUMN2, ID)ARCHIVE1:CREATE TABLE MyTest1 (ID INT IDENTITY(1,1), COLUMN1 CHAR(10), COLUMN2CHAR(10))CREATE CLUSTERED INDEX IDX_MyTest1 ON MyTest1 ON (ID)CREATE NONCLUSTERED INDEX IDX_MyTest2 ON MyTest1 ON (COLUMN2, ID)REPORTDB:CREATE VIEW MyTest1 ASSELECT ID, COLUMN1, COLUMN2 FROM PRODUCTION1..MyTest1UNION ALLSELECT ID, COLUMN1, COLUMN2 FROM ARCHIVE1..MyTest1While in PRODUCTION1:SELECT ID, COLUMN2 FROM MyTest1 WHERE COLUMN2 = 'Testing'--> Clustered index seek PRODUCTION1..IDX_MyTest2--> Results returnedWhile in ARCHIVE1:SELECT ID, COLUMN2 FROM MyTest1 WHERE COLUMN2 = 'Testing'--> Clustered index seek ARCHIVE1..IDX_MyTest2--> Results returnedWhile in REPORTDB:SELECT ID, COLUMN2 FROM MyTest1 WHERE COLUMN2 = 'Testing'--> Index seek PRODUCTION1..IDX_MyTest2--> Bookmark lookup PRODUCTION1..IDX_MyTest1--> Index seek ARCHIVE1..IDX_MyTest2--> Bookmark lookup ARCHIVE1..IDX_MyTest1--> Concatenate data and results returned

View 3 Replies View Related

Transact SQL :: Data Compression And Rebuilding Indexes

Aug 31, 2015

If I'm doing data compression(page level) does it rebuild indexes too? and how about stats, does it update stats too?

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved