I am updating a table in store procedure. I want to check whether the statement has successfully updated the table or not. i know in mySql i can handle it using ROW_COUNT() function. but how can i do it in MS-SQL?
View 2 RepliesI have a sql sever 2005 express edition database but when i run my backup command from the command prompt, i get this error message .
The .Net SqlClient Data Provider has received a severity 16, state 11 error number 911 on line 1 of procedure on server KSS15SQLEXPRESS: Could not locate entry in sysdatabases for database 'DATABASE1'. No entry found with that name. Make sure that the name is entered correctly. The .Net SqlClient Data Provider has received a severity 16, state 1 error number 3013 on line 1 of procedure on server KSS15SQLEXPRESS: BACKUP DATABASE is terminating abnormally.
DATABASE one is the name of the database i want to backup. Now it looks there so many databases some of which i have no idea where they are. It looks like there some system stored procedures i have to run first before my database file can be located by my commands. It would be wonderfull if some one pointed me to an article that covers this initial part thoroughly.
Hello,
I want to update a field value with its default constraint value defined. how can i do that?
Suppose if it is a Date field, my default date value is 1/1/2000 and currently it contains 6/18/2007, i would like to know how can we update this field with default value.
Thanks for all your help,
General Problem
I have table in that created column is there
it has the data like
23
24
45
45
43
67
by mistake if i updated that column as 77
can we roolback to old date
Hi all,
I am using the odbc connector to get a local table. I want that table to get populated every night automatically. How can i do that? Also i want to check if any existing record is updated/changed in the dsn database. Any help is highly appreciated.
Thanks,
Jeff.
Hi Guys,
When iam trying to update the table with the field called "openstatus" is smallint . Iam trying to do following like this
update table1
set openstatus=2 where openstatus=NULL
But
iam getting error like this:
"Syntax error converting the varchar value 'NULL' to a column of data type smallint."
Could you please let me how to solve this proble. i really appreciate it.
Thanks in advance
Garir
In SQL SERVER if there is failure during updation of certain rows, what will be the state?
View 3 Replies View RelatedDear all,
i've one database in my server namely mydb1, and another database mydb2. same type of tables are there. in those tables, when ever developers are entering data, that should be automatically updated here also.
i think replication suits this.
daily maximum 200 transactions may occur in the mydb1.
if replication suits this, which replication can i use..and please guide me for the process....
and one more doubt...actually only 22 tables out 0f 1300 tabls will modify regularly... rest of those are not changed frequently...
Vinod
Even you learn 1%, Learn it with 100% confidence.
hi i cant update the values in the table from data base if i do so an error message will show as below
No row was updated .
The data in row 37 was not committed.
Error Source: Microsoft.VisualStudio.DataTool.
Error Message: The row values updated or deleated either do not make the row unique or they alter multiple rows(2 rows)
Hello all
i am trying to update the database with the DataSet (Updated from the DataGrid) but it is giving the error as
"Dynamic SQL generation for the UpdateCommand is not supported against a SelectCommand that does not return any key column information."
the code is as follows
public DataSet bindControlToGrid(DataSet dataSet)
{
SqlConnection objConn= null;
SqlCommand objComm = null;
try
{
objConn = new SqlConnection(@"User ID=sa;Password=sa;database=ExtraNet;server=EAGLESEAGLES");
SqlDataAdapter objAdapter=new SqlDataAdapter();
objAdapter.SelectCommand= new SqlCommand("SELECT sUserID,sUserName FROM tblUser WHERE dUserDeActivated IS NULL ORDER BY sUserName,nUsrSerialNo",objConn);
SqlCommandBuilder sqlCommandBuilder = new SqlCommandBuilder(objAdapter);
objConn.Open();
DataSet objdataSet= new DataSet("ko");
string d = (dataSet.Tables[0].Rows[0].ItemArray.GetValue(0).ToString());
objAdapter.Fill(objdataSet);
objAdapter.Update(dataSet);
objAdapter.Dispose();
}
catch(Exception ex)
{
string s= ex.Message;
}
finally
{
//objComm.Dispose();
objConn.Close();
}
return dataSet;
}
kindly help
i have a table which have 64 columns.
Problem:
When i update a column through stored procedure like
Column1=400
then after update when i see that value which is 100 but that will 400
So how this problem occured.
Dear Folks,
Is it possible to update sys.databases table?
i need to update one column in this table.........
but it is showing some error
Msg 259, Level 16, State 1, Line 2
Ad hoc updates to system catalogs are not allowed.
how can i update this table?
Vinod
€œI have a scenario where i am trying to insert 200,000 lac records & update 200,000 lac record in destination table using SISS Package (SQL SERVER 2005) but I am not able to neither update nor insert the records . while executing the package its not showing any error also . what could be the problem ? €œ
We have business logic in Package creation 1) Insert New records and 2) Update Existing Records using the follow Data flow diagram
For update we are using OLEDB command, for insert we are using OLEDB Destination.
We are using merge join for spliting record into insert and update.
I have a table having 1 column whose value have to update,the column is encrypted using symmetric encryption. Value in column is 0 in char form, I have to increment it, when retrieving it return 0 to increment i have to convert it to int,it becomes 48 after increment it is 49 after conversion to char it becomes 1. It is going right upto 9 after 10 it jumps to very large number on increment.
View 5 Replies View RelatedHi,
I am trying to set up Transactional replication with immediate
updation.
The configuration is as follows:
1. Publisher is SQL server 2000 Enterprise Edition, and Distributor is
on the same server.
2. Publisher SQL server Standard Edition is installed on Windows 2003 with sp1.
3. Subscriber is an SQLServer 2000 Evaluation version on Windows
Professional 2000 with sp2.
When I set up the Publisher with transactional replication with
immediate updation only, the set up was successful.
I subscribed 2 instances of SQL server from Windows 2000 professional
on the local LAN in the same domain. The set up went fine.
When I update from the publisher end the updation is successfully
replicating to all the subscribers. But when I try to insert any
records in any one of the subscribers, I am getting the following
error:
[Microsoft] [ODBC SQL Server Driver ][SQL Server
][DBNETLIB][ConnectionOpen(Connect()).] SQL Server does not exists or
access denied.
I am beginner to this replication technology, but I have to set up in
my organisation. Please anybody help me in figuring out the actual
problem and resolving it.
Thanks in advance.
Prashant N M
HI,
How to create package in SSIS by applying the business Logic like if the record already exist it should be and update else it should be an insert in the destination table. how to achive this funcality in SQL SERVER 2005 (Business Intelligence studion).
Thanks & Regards
Nagaraj.S
Hi guys,
Here's something that I need to do. Might be pretty simple for you guys. :)
I have a table of Employees. All the employees work in some departments. So, I have a table of Department too. Employee table consists of details like EmpID, FirstName, LastName, SAP etc.
Dept table consists of TeamID, TeamNo.
Now, I have another table called as Emp-Team. This table basically maps the employees to the department by taking EmpID and TeamID. There's one more column in this table which is date. This date is required because when some person resigns (say today) then he won't feature in the headcount for July 08 but till June 08 he was there and this is how I maintain my history. e.g All the employees in the Emp_Team table have date as 01/06/2008 for this month. So, in future if I query for the employees who worked in June I will get this list.
Now, I want to copy all this data in the same table again and want to remove any people who have resigned. Their resignation status is in the Employee table, where you have their last working date as well. So, when I add all this data with date 01/07/2008 I want to remove any employees whose last working date is before that.
Can this be done or I have to change my design? In case it can be - How?
Thanks a lot! :)
Hi,
I want to assign a list columns to be the PK on a table. I don't know what this list of columns would be.How do I go about figuring that?
Sample Data
Col1...Col2...Col3..Col4
1...........2.......A......X
1...........2........B.....X
1...........2.......A......Y
As you can see Col1 & Col2 ONLY do not make up the PK. I need to include Col3 as well. My concern is I am not sure if I have a row like..
1...........2.......A......X reapeated lower down the order. So how do I figure the PK out?
Thanks
Can someone show me some C# code for detecting if a SQL row exists or not? This seems like a very typical action and I cannot for the life of me find a tutorial online that explains this step. In my code I'm either going to INSERT or UPDATE a record. I tried sending a SELECT command through a ExecuteNonQuery, but only got -1 as a response. Apparently ExecuteNonQuery does not work with SELECT. I then saw that T-SQL has an EXISTS keyword, but I cannot see anyway to use that from within C#.So...can anyone share the typical code they use to identify if a row exists or not within a database. I guess I was execting there to be some method available to do this sort of thing.
View 1 Replies View Relatedi want to check a value in 2 tables. the 1st table i want to check if the value exists and from the 2ed table i samething.
i came up with this but when it's doing the second if i get error on the page.
Dim ReturnVal As Integer
Dim ReturnVal2 As IntegerDim conn As SqlConnection = New SqlConnection(ConfigurationManager.ConnectionStrings("imacstestConnectionString").ConnectionString)
Dim cmd As SqlCommand = New SqlCommand("SELECT [ReportNumber] FROM [AppraisalSummaryBlue] WHERE ([ReportNumber] = @ReportNumber)", conn)
'To check if the # is registered.Dim cmd2 As SqlCommand = New SqlCommand("SELECT [ReportNumber] FROM [t_RegisterInfoTemp] WHERE ([ReportNumber] = @ReportNumber)", conn)
cmd.Parameters.AddWithValue("@ReportNumber", txtReport.Text)cmd2.Parameters.AddWithValue("@ReportNumber", txtReport.Text)
conn.Open()
ReturnVal = Convert.ToInt32(cmd.ExecuteScalar())
conn.Close()
'This checks if the # is correct.
If ReturnVal > 0 Then
'This checks if its registered with someone else.
conn.Open()
ReturnVal2 = Convert.ToInt32(cmd2.ExecuteScalar())
conn.Close()
If ReturnVal2 <> 0 ThenServer.Transfer("regccinfo.aspx")
Else
lblError.Text = "the # is registered with someone else."
End If
Else
lblError.Text = "the # does not exists."
txtReport.Focus()
End If
Good morning everyone I am writing a windows forms application that will work similar to the windows messenger popup. I need this application to display a message to the user whenever a record is added to table in my DB. Any help would be appreciated in explaining how I can check the DB for new records.
View 3 Replies View RelatedI've forgotten the character set that I've chosen when I was installing the SQL Server 7. Is there a way to check?
I'm currently using US English version of Windows NT4 and SQL7. But interestingly, all the data is in Japanes characters. It's actually for a Japanese website, and the front-end application is written in ASP. I remember reading somewhere that it is impossible to do certain type of sorting (by some particular order for the Japanese language) as it is limited by the choice of the language of the NT OS.
The type of sorting that I'm looking at is the grouping of 5-characters. One example is in http://www.forest.impress.co.jp/aiueo.html
Would this be possible with my current setup? Or would it help if I migrate over to Windows 2000? (I'd rather not move to Japanese NT4)
Your feedback and advice would be very much appreciated!
Hi,
Just a brief question. I have a script which does a number of insert statements. What I would like to do is determine if the insert statements were all successful. Aside from checking @@ERROR after every insert, is there a way to check if all the insert statements completed successfully?
Thanks,
Jim
I want to do a check to see if a number falls within a range specified by the user. Basically, they enter in a min and max value and I return a hit if a number falls inbetween.
I have having trouble with my SQL statement:
Code:
SELECT DISTINCT *
FROM Table
WHERE ( (0=0)
AND
(min.value <= Table.Value <= max.value) )
(This isn't my actual code, but just the logic)
It will return all the results everytime. Does anyone have any suggestions on what I could be missing here?
Thanks in advance!
I have a question I hope someone can help me with.
My situation:
I have a single-step job in SQL Server, which runs a stored procedure, A. This stored procedure invokes another stored procedure, B. In B, one of the statements is a 'BACKUP DATABASE' command, and a database is backed up to a file.
The job is started by an application. Once started, the application then uses the SQL-DMO property CurrentRunStatus to periodically check the status of the job. When the property returns the value SQLDMOJobExecution_Idle (indicating the job has completed), the application code then continues processing, and attempts to access the .dat file produced by the 'BACKUP DATABASE' command.
My problem:
On occasion, the application will hit the problem where either the backup file cannot be located, or the file is still being locked by another process (Error=The process cannot access the file because it is being used by another process).
Is anyone able to shed some light on this?
I assume that the job will only return a completed status after:
(a) both A and B have completed execution, and
(b) the BACKUP operation has completed
Is it possible that even though SQL Server indicates the job has finished, that the BACKUP operation still hasn't completely ended?
Thanks for any help,
Andrew
I have around 25 sql servers(sql server 2000) all on windows server 2003. i would like to know if anyone has a script that will poll all the servers and check to make sure the agent is running.
thanks for your help
I need to check one table while updating another table
suppose i need to check table1's value is whether less then 0 or not
without if condition can i check it with update query?
thank you
Hello, everyone:
After backup is finished, how to check if the backup is successful, and it is same as the original database? Thanks.
ZYT
I have a table that I know has a null or nothing in a field. When I run this query to get a list of them nothing comes back at all but it doesn't error out. Any ideas?
select *
from lab_test_add_conf
where table_name = null
order by lab_test_conf_id
I chaps and chappets.
It's been a while!
This is going to sound ignorant but...
I had a look here http://support.microsoft.com/?id=321185
And one thing isn't clear. How doe you know if the 32-bit or 64-bit version was installed?
------------------------
Me: What do you want to know from your data warehouse?
Client: Err...Emm...Everything
Me: OK, that's great. That's all I need to know. I'll see you when it's done.
i'm not fluent with sql and i have a question to ask..
if i want to check whether a product is available between two dates, how can i do so? for example, i want to check whether it's available between 5/23/2007 to 5/25/2007..
thanks
Our System currently has on the upwards of 300 stored procedures in it.
We have SP's that call SP's that call SP's and sometimes a Stored Procedure will return 10 ResultSets which are used by .NET.
Some of our developers do not check other stored procedures when they modify the SP parameters, and in doing so break the system until the testers find it.
is there a way to run a command to check ALL the stored procedures to see if they work, they match the SP they're calling, etc?
Hey all,prolly a simple solution, but why isn't the following string working inmy execute sql step within DTS? It produces results, just not the onesI want... What am I doing wrong?select x from new_files where x like '%[^0-9]%' and x like '%[^a-z]%'It's displaying all the records? It should only be displaying thoserecords that do *not* contain letters or numbers.Thanks in advance!-Roy
View 3 Replies View Related