Checkpoint File Falied During Creation - How To Figure This Error Out

Oct 12, 2007

hi folks,

i have this error when trying to run the package in development mode.
and i can not decipher this non-intuitive message:

Error: 0xC001604D at <package name>: Checkpoint file "" failed during creation due to error 0x80070003 "The system cannot find the path specified.".

please note that i have no checkpoints on package anymore; i had two but i deleted them but this message still appears.
i have searched the web but no luck in finding an answer.

maybe someone would be able to point out my obvious mistake here.

many thanks,

Nicolas

View 1 Replies


ADVERTISEMENT

Error When Trying To Use Checkpoint File

Jun 20, 2006

I have a package with settings SaveCheckpoints=True and CheckpointUsage = Never.  After the package failed I fixed the cause of failure by setting a database column to allow nulls.  Then I went to our web app that we built to monitor package execution and clicked on the button to restart the package.  The web app loads the package and then sets the CheckpointUsage property of the package object to 'Always'.  Then it executes the package in a new thread.  The package then produced this error:

Checkpoint file "E:Package1Checkpoint" failed to open due to error 0x80070005 "Access is denied.".

Since there was only one remaining task to run in the package I ran it manually. 

Now here is the really interesting part.  I then needed to run the same package but with different parameters.  When I attempted to run it with the saved checkpoint settings (CheckpointUsage=Never, SaveCheckpoints=True) I got this error:

"An existing checkpoint file is found with contents that do not appear to be for this package, so the file cannot be overwritten to start saving new checkpoints. Remove the existing checkpoint file and try again. This error occurs when a checkpoint file exists, the package is set to not use a checkpoint file, but to save checkpoints. The existing checkpoint file will not be overwritten. "

So I then attempted to rename the checkpoint file so it would not interfere, however, it would not let me, saying that the file was in use.

So what I had to do was add a configuration entry which set SaveCheckpoints to False.  Then I was able to run the package.

Any ideas?

 

 

View 3 Replies View Related

Error Redirection - How To Supress File Creation?

Oct 16, 2007


Hi all!

I´ve having some issues with a package that I´m currently building.
The package is pretty much finished and doing what it´s supposed to,
just doing some testing to ensure everything is in order.

The package is pretty basic:
Read a fixed with text file, do a lookup on destination database table,
conditional split to determine what to insert and what to update, and that´s it!

At the source of my data flow I have the error output set to redirect all rows,
counting those rows, and finally writing them to a dynamically created file.

However, I just now realized that this file seems to be created ALWAYS,
regardless of rows actually being redirected or not. Everytime I run the package
with no rows being passed through the error output, I still end up with a
dynamically named, zero sized text file.

So my question: Is it possible to supress the creation of this file,
or do I have to add a file system component to my control flow,
deleting this file if my number of errorrows = 0 ?

Hope you can help!

Regards
Daniel

View 1 Replies View Related

SQLExpress Database File Auto-creation Error:

Jun 12, 2006

i am using sql2005, the data inserted into the database by using createuserwizrd. after that anyone give me this error
anyone ? any thought? thanks please
An error has occurred while establishing a connection to the server.  When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. SQLExpress database file auto-creation error:
The connection string specifies a local Sql Server Express instance using a database location within the applications App_Data directory. The provider attempted to automatically create the application services database because the provider determined that the database does not exist. The following configuration requirements are necessary to successfully check for existence of the application services database and automatically create the application services database:

If the applications App_Data directory does not already exist, the web server account must have read and write access to the applications directory. This is necessary because the web server account will automatically create the App_Data directory if it does not already exist.
If the applications App_Data directory already exists, the web server account only requires read and write access to the applications App_Data directory. This is necessary because the web server account will attempt to verify that the Sql Server Express database already exists within the applications App_Data directory. Revoking read access on the App_Data directory from the web server account will prevent the provider from correctly determining if the Sql Server Express database already exists. This will cause an error when the provider attempts to create a duplicate of an already existing database. Write access is required because the web server accounts credentials are used when creating the new database.
Sql Server Express must be installed on the machine.
The process identity for the web server account must have a local user profile. See the readme document for details on how to create a local user profile for both machine and domain accounts.

View 2 Replies View Related

How Do I Create A Checkpoint File?

Oct 24, 2006

hi everyone,

Does anyone ever used or created something like that? What kind of format it might be and so on...

TIA

View 8 Replies View Related

Checkpoint File Used By Another Process

Dec 5, 2006

I have an SSIS solution with 8 packages in it. I have checkpoint turned on with the 'If Exists' option. Each of the 8 packages have 8 separate checkpoint files specified.

One out of two runs will fail with one of the below errors:

The checkpoint file \xxxxxxxx is locked by another process. This may occur if another instance of this package is currently executing.

Checkpoint file \xxxxxxxx failed to open due to error 0x80070020 "The process cannot access the file because it is being used by another proces


I have checked all the settings and everything looks fine, looks like the problem is when you have many Control Flow tasks in a package and if two of them are completed at the same time and they try to write to this file one of them is unable to write and it fails.

This is causing the entire job to fail even though the control flow was successful.

Anyone encounter this issue? Any assistance is appreciated.

Thanks!

View 5 Replies View Related

Real Figure Instead Of Exponential Figure Needed

May 29, 2008

Hello,

I use OPENROWSET to read values from Excel and store them in a SQL Server table. In the Excel file I have a row having format 'Number' with two decimal places.

Example: 1225000.00

When I select this value using SSMS I get the correct value:

1225000

Strange enough, I cannot see the decimals anymore. However, when I now store this value into my table and then select it from there I get: (the datatype in the table is VARCHAR(max))

1.225e+006

I would not care if I could convert this back to a numeric datatype but this seems not to work: CAST('1.225e+006' as INT) throws an exception. Obviously OPENROWSET sends the data strictly as a character string. Storing this into varchar(max) works for small figures but it starts to use exp values for big figures.

Does anybody has an idea how to bring huge Excel based figures safely into a MS SQL Table ?

Thanks: Peter

View 5 Replies View Related

Is It Possible To Execute A Container Regardless Of The Checkpoint File?

Feb 23, 2006

I have a situation where I need to make sure a task executes regardless of whether the package starts from a checkpoint or not. Is this possible?

Here's the scenario:

I have a package with 3 tasks {TaskA, TaskB, TaskC} that execute serially using OnSuccess precedence constraints.
The package is setup to use checkpoints so that if a task fails the package will restart from that failed task
TaskA is insignificant here.
TaskB fetches some data and puts it in a raw file
TaskC inserts that raw file data into a table.

Problem is that the insertion violates an integrity constraint in the database - so it fails. The problem is easily fixed but it needs to be fixed in TaskB because that is where the data is sourced.

So, I need to be able to execute TaskB again, even though it was TaskC that failed. Currently the package restarts from TaskC which reuses the raw file (which has the bad data in it) so the package continues to fail even though the cause of the problem has been fixed.

How do I configure the package in order to execute TaskB again? Is it even possible?

Regards

-Jamie

View 17 Replies View Related

Understanding The Contents Of A Checkpoint File

Aug 18, 2006

Hi,

I have a problem where my packahe isn't restarting from the point of failure and I'm tryig to understand why not.



The following line came from the checkpoint file:

<DTS:Container DTS:ContID="{36A685E1-049A-4E6C-9884-AADF8BE29577}" DTS:Result="0" DTS:PrecedenceMap="" />

Can anyone explain:

What DTS:Result & DTS:PrecedenceMap are used for?
What values can DTS:Result contain and what do they mean? [Today I have only seen "0".]
What values can DTS:PrecedenceMap contain and what do they mean? [Today I have only seen "Y" & "".]

Thanks

Jamie

View 1 Replies View Related

No Of Package Runs Using Checkpoint File

Nov 30, 2006

hi everyone,

Is there anyway to find out the number of runs of a package using its checkpoint file?

Or is there anyother way to figure out the number of runs of a package till it gets succeeded?



Thanks in advance,

View 3 Replies View Related

New Guy Question: Which Came First ... The Chicken Or The Checkpoint File?

Oct 18, 2005

Hello all...here's a question from a newbie ...

View 8 Replies View Related

Execute A Task Even Though A Checkpoint File Says It Has Already Been Executed

Dec 16, 2005

I have the following scenario:

-I have a package that uses checkpoints

-The first task in that package (an Exec SQL Task) retrieves a timestamp value from an external source

-That timestamp value is used in data-flows to pull data that has been changed since then

-At the end of the package the value in the db is updated

 

Now...if something fails then on the next execution the checkpoint file will kick in. But this means that the first task (which retrieves the timestamp) will not execute and therefore all the data-flows will be pulling the wrong data.

The only way I can think of getting around this problem is to specify that a task should execute regardless of the presence of a checkpoint file. Unfortunately it seems this cannot be done.

Another option might be to put an OnPreExecute task on the package that gets the timestamp value.

 

Anyone got any advice about how I should progress? Short of a suggestion from elsewhere I'm going to go with the tactic of using the OnPreExecute to retrieve the timestamp.

Thanks in advance.

-Jamie

 

 

View 3 Replies View Related

How To Aware The Figure Of Rows Of A File?

Jul 19, 2007

My goal is be able to compare the total number of rows of a plain file with the total number of rows inserted in a table (with that same file, of course) and then, send an email.

How can I do such thing?



TIA again

View 3 Replies View Related

Including MTD And YTD Figure With A Daily Figure

Feb 4, 2008

Hello,
I have a query that returns a daily revenue figure. The query is as follows:

SELECT top 1000
ds.AcctCode,
ds.TxnDate,
SUM(isnull(ds.FuelFee,0)) + SUM(isnull(ds.CashFee,0)) + SUM(isnull(ds.ScFee,0)) AS TotalDailyRevenue,
--"MTD" = ?,
--"YDT" = ?,
ps.TC,
CASE
WHEN ps.Proj = 100 THEN 'New Account'
WHEN ps.Proj = 200 THEN 'Current Account'
END AS ProjStatus,
ps.FSR,
ps.SubmitRep1

FROM
TxnRptg.dbo.tbl_DailySummary ds
INNER JOIN SalesData.dbo.tbl_CYProcessedSales ps
ON ds.AcctCode = ps.Acct

WHERE
MONTH(ds.TxnDate) = 1
AND
Proj IN (100,200)
AND TC = 'HV'

GROUP BY
ds.AcctCode, ds.TxnDate, ps.TC, ps.Proj, ps.FSR, ps.SubmitRep1

ORDER BY
ds.AcctCode, ds.TxnDate

--*********************************

TxnDate represents a single day of the month. How can I include MTD so that the dates for the revenue total are from DATEADD(mm, DATEDIFF(mm,0,getdate()), 0) (beginning of current month) to TxnDate, and YTD so that the revenue totals are from DATEADD(yy, DATEDIFF(yy,0,getdate()), 0) (beginning of the current year) to TxnDate?


Thank you for your help!


cdun2

View 5 Replies View Related

Can't Figure Out This Error!

Jun 8, 2007

Here is my code below. When I attempt to run the data flow task that calls this script, I get this error:



"Index was outside the bounds of the array."



I honestly do not know what the problem is here. There are definitely 6 columns in the file. In fact, even if comment out everything except the first line (myCol1), I still get the "Index was outside the bounds of the array." error.



Any ideas??? Need help.



Public Overrides Sub Input0_ProcessInputRow(ByVal Row As Input0Buffer)

Dim rowValues As String()

rowValues = Row.Line.Split(columnDelimiter) 'parse row by comma

If Row.Line Like "*OPENING BALANCE*" Then

Row.AccountNumber = Nothing 'set to null for conditional split

Row.OpeningBalance = CDec(rowValues(3)) 'get the 4th value



ElseIf Row.Line Like "*CLOSING BALANCE*" Then

Row.AccountNumber = Nothing 'set to null for conditional split

Row.ClosingBalance = CDec(rowValues(2)) 'get the 3rd value



Else

Row.myCol1 = CStr(rowValues(0)).Replace("""", String.Empty)

Row.myCol2 = CStr(rowValues(1)).Replace("""", String.Empty)

Row.myCol3 = CStr(rowValues(2)).Replace("""", String.Empty)

Row.myCol4 = CStr(rowValues(3)).Replace("""", String.Empty)

Row.myCol5 = CStr(rowValues(4)).Replace("""", String.Empty)

Row.myCol6 = CDec(rowValues(5))



End If

End Sub

View 10 Replies View Related

Asp.net - SQL Server Remote Connection Falied

Aug 30, 2007

Hi, I have an issue with ASP.NET 2.0 and SQL Server 2005
My project when hosted in a machine its working, but in case of some other machine it is throwing the following error
An error has occurred while establishing a connection to the server.  When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)I have turned off my firewall and network configuration for sql server and its also done as tcp/ip and named pipes…though it is not working …
 The surprise is if I run using IDE its running , in the same machine after hosting it is not running,  where the db is in another machine. What could be the problem? Any suggestions would be highly appreciated. Regards,Naveen  
Regards,
Naveen  

View 3 Replies View Related

Can't Figure Out Error Message In SQL

Oct 16, 2007

Can someone please look at my stored procedure? I am trying to create the following stored procedure, but get the following errormessages:
Msg 102, Level 15, State 1, Procedure InsertWork, Line 3Incorrect syntax near '7'.Msg 102, Level 15, State 1, Procedure InsertWork, Line 25Incorrect syntax near '@7am8am'.
USE [Work]GO
SET ANSI_NULLS ONGOSET QUOTED_IDENTIFIER ONGOCREATE PROCEDURE [dbo].[InsertWork](  7am8am       nvarchar(500),  8am9am       nvarchar(500),  9am10am       nvarchar(500),  10am11am      nvarchar(500),                  11am12noon    nvarchar(500),                12Noon1pm     nvarchar(500),  1pm2pm       nvarchar(500),  2pm3pm       nvarchar(500),  3pm4pm        nvarchar(500),  4pm5pm       nvarchar(500),                  5pm6pm       nvarchar(500),  6pm7pm       nvarchar(500),  7pm8pm       nvarchar(500),  8pm9pm        nvarchar(500),  9pm10pm       nvarchar(500),                  10pm11pm      nvarchar(500),  Notes         nvarchar(500),         Date           nvarchar(15))AS BEGIN INSERT INTO WorkDay VALUES                 @7am8am,                 @8am9am,  @9am10am,   @10am11am,   @11am12Noon,  @12Noon1pm,  @1pm2pm,  @2pm3pm,  @3pm4pm,  @4pm5pm,  @5pm6pm,  @6pm7pm,  @7pm8pm,   @8pm9pm,  @9pm10pm,  @10pm11pm,  @Notes,  @DateEND
 

View 3 Replies View Related

Need Help To Figure Out This SqlQueryNotificationService Error.

Mar 30, 2008

I found every several minutes, sometimes one or twice in an hour, I still get a dozen error like below logged in SQL Log. See the error is "You do not have permission to access the service". I found some articles on other errors, but nothing about this error. I want to get more information on this, and a way to trace what is the permission about and which user doesn't have the permission.


Source spid26s

Message
The query notification dialog on conversation handle '{E6FC299F-8BFE-DC11-A4E1-000D5670268E}.' closed due to the following error: '<?xml version="1.0"?><Error xmlns="http://schemas.microsoft.com/SQL/ServiceBroker/Error"><Code>-8494</Code><Description>You do not have permission to access the service &apos;SqlQueryNotificationService-9ff8b39d-90a8-45bc-83a7-23837920774d&apos;.</Description></Error>'.



thanks

View 7 Replies View Related

Integration Services :: Create SSIS Package Checkpoint-file Property With UNC Path

Aug 26, 2015

I can set the propperty of the checkpoint file to a local drive, but not to a UNC path mapping, mapping to my host server. (loop back)

Example: "I:FILEFILE1$InputArchiveOntwikkel " is possible as checkpoint file property.

S11487O$InputArchiveOntwikkel  is not possible, though this is the same folder on the local host.

For data source both unc path and drive mapping are allowed. Why this difference?

View 5 Replies View Related

SQL Insert Statement Error That I Cannot Figure Out

Dec 11, 2004

I am receiving the following error when trying to insert values from textboxes on a registration form:

Description: An error occurred during the compilation of a resource required to service this request. Please review the following specific error details and modify your source code appropriately.

Compiler Error Message: BC30205: End of statement expected.

Source Error:



Line 19: Dim dbConnection As System.Data.IDbConnection = New System.Data.SqlClient.SqlConnection(connectionString)
Line 20:
Line 21: Dim queryString As String = "INSERT INTO [UserID_db] ([Code], [UserID], [Password], [Email1], [Name_First], [Name_Last], [Admin_level]) VALUES ('" & txtUserID.Text"', '" & txtUserID.Text"', '" & txtPassword.Text"', '" & txtEmail1.Text"', '" & txtFirstName"', '" & txtLastName.Text"', '" & txtAdminLevel.Text"')"
Line 22: Dim dbCommand As System.Data.IDbCommand = New System.Data.SqlClient.SqlCommand
Line 23: dbCommand.CommandText = queryString


My code is below. Can anyone help me figure out what is wrong with my code?

<%@ Page Language="VB" Debug="true" %>
<%@ Register TagPrefix="wmx" Namespace="Microsoft.Matrix.Framework.Web.UI" Assembly="Microsoft.Matrix.Framework, Version=0.6.0.0, Culture=neutral, PublicKeyToken=6f763c9966660626" %>
<%@ import Namespace="System.Data" %>
<%@ import Namespace="System.Data.OleDb" %>
<script runat="server">

Sub btnSubmit_Click(sender As Object, e As EventArgs)

Dim UCde as string = txtUserID.Text
Dim UserID as string = txtUserID.Text
Dim Password as string = txtPassword.Text
Dim Email1 as string = txtEmail.Text
Dim FirstName as string = txtFirstName.Text
Dim LastName as string = txtLastName.Text
Dim AdminLevel as string = dropAccountType.SelectedItem.Value


Dim connectionString As String = "server='(local)'; trusted_connection=true; database='master'"
Dim dbConnection As System.Data.IDbConnection = New System.Data.SqlClient.SqlConnection(connectionString)

Dim queryString As String = "INSERT INTO [UserID_db] ([Code], [UserID], [Password], [Email1], [Name_First], [Name_Last], [Admin_level]) VALUES ('" & txtUserID.Text"', '" & txtUserID.Text"', '" & txtPassword.Text"', '" & txtEmail1.Text"', '" & txtFirstName"', '" & txtLastName.Text"', '" & txtAdminLevel.Text"')"
Dim dbCommand As System.Data.IDbCommand = New System.Data.SqlClient.SqlCommand
dbCommand.CommandText = queryString
dbCommand.Connection = dbConnection

Dim rowsAffected As Integer = 0
dbConnection.Open()
dbCommand.ExecuteNonQuery()
dbConnection.Close()
End Sub


Thanks for your help.

Chris

View 5 Replies View Related

Is There A Size Limit To This Cause Im Getting An Error That I Cant Figure Out

Mar 14, 2006

I create an sql string as so, add parameters to it and execute it:
string cmdstr = "INSERT INTO locations(id1, id2, companyname, address, city, province, postalcode, phonenumber, faxnumber, contact, contactemail) VALUES (@id1,@id2,@companyname,@address,@city,@province,@postalcode,@phonenumber,@faxnumber,@contact,@contactemail)";
SqlCommand sqlCmd = GetCommandSQL(cmdstr);
sqlCmd.CommandTimeout = TimeOut;
sqlCmd.Parameters.Add("@id1", SqlDbType.Int).Value = itID;
sqlCmd.Parameters.Add("@id2", SqlDbType.Int).Value = Convert.ToInt32(ddlDPCLocation.SelectedValue);
sqlCmd.Parameters.Add("@companyname", SqlDbType.VarChar).Value = ((TextBox)dvShippingInformation.FindControl("tbCompanyName")).Text;
sqlCmd.Parameters.Add("@address", SqlDbType.VarChar).Value = ((TextBox)dvShippingInformation.FindControl("tbAddress")).Text;
sqlCmd.Parameters.Add("@city", SqlDbType.VarChar).Value = ((TextBox)dvShippingInformation.FindControl("tbCity")).Text;
sqlCmd.Parameters.Add("@province", SqlDbType.VarChar).Value = ((TextBox)dvShippingInformation.FindControl("tbProvince")).Text;
sqlCmd.Parameters.Add("@postalcode", SqlDbType.VarChar).Value = ((TextBox)dvShippingInformation.FindControl("tbPostalCode")).Text;
sqlCmd.Parameters.Add("@phonenumber", SqlDbType.VarChar).Value = ((TextBox)dvShippingInformation.FindControl("tbPhoneNumber")).Text;
sqlCmd.Parameters.Add("@faxnumber", SqlDbType.VarChar).Value = ((TextBox)dvShippingInformation.FindControl("tbFaxNumber")).Text;
sqlCmd.Parameters.Add("@contact", SqlDbType.VarChar).Value = ((TextBox)dvShippingInformation.FindControl("tbContact")).Text;
sqlCmd.Parameters.Add("@contactemail", SqlDbType.VarChar).Value = ((TextBox)dvShippingInformation.FindControl("tbContactEmail")).Text;
sqlCmd.ExecuteNonQuery();
for testing purposes ive added the max text in each textbox area, so each textbox has 50 characters or so
and i get an error message as follows, when executing the query:
"System.Data.SqlClient.SqlException: String or binary data would be truncated.
The statement has been terminated.
   at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection)
   at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection)
   at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)
   at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj)
   at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString)
   at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async)
   at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, DbAsyncResult result)
   at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(DbAsyncResult result, String methodName, Boolean sendToPipe)
   at System.Data.SqlClient.SqlCommand.ExecuteNonQuery()
   at _default.InsertGKShippingLocation() in c:\Inetpub\wwwroot\cleanapp\default.aspx.cs:line 125
   at _default.InsertOrder() in c:\Inetpub\wwwroot\cleanapp\default.aspx.cs:line 93
   at _default.InsertandSend() in c:\Inetpub\wwwroot\cleanapp\default.aspx.cs:line 178"
Anybody have any ideas why this is happening

View 1 Replies View Related

Lookup Error How To Figure Out What's Wrong

Mar 19, 2008

I'm new to the SSIS world and am writing my first package. What the package is supposed to do is to take the XML export from one database and import into an identical database (production). There's no connection between the two DBs. During import, the SSIS package checks if there's any primary key values in a table already exist in the production DB and only imports the new records.

So here's the data flow of my package: XML Source -> Lookup -> Conditional Split -> SQL Server Destination. I'm doing a lookup against the same destination DB to check if a record (primary key value) already exists or not, and doing the condition ISNULL(id_out) in the Conditional Split. I really don't know if this is the correct way to implement it. The Lookup control errors out during debugging in Visual Studio. Here's what;s on the progress tab:

[Lookup [1745]] Error: The "component "Lookup" (1745)" failed because error code 0xC020901E occurred, and the error row disposition on "output "Lookup Output" (1747)" specifies failure on error. An error occurred on the specified object of the specified component.

[DTS.Pipeline] Error: The ProcessInput method on component "Lookup" (1745) failed with error code 0xC0209029. The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running.

How do I get more specific error on what went wrong?


Thanks
Bob

View 3 Replies View Related

DTS Table From Access To SQL, Identity Column Error. Should Be Easy, But I Can't Figure It Out.

Oct 4, 2007



I am trying to move data from Access to SQL Server 2000 using DTS.

I have an Access Source and SQL Server Desitination, My destination table has a field called tableID that is not in the source. TableID is a Primary Key and an Identity column.

I have Enable Identity Insert checked in the options of the Transform Data Task.

When I execute ythe task, I get the error

"Cannot insert the value NULL into column 'TableID'. Does not allow nulls. Insert Fails.

Does anyone know why this simple task would fail?

Mike


View 6 Replies View Related

T-sql File Creation

May 30, 2004

Hi all,

Can I create one xml file through transact-sql ( in a stored procedure )?
From where i will get the tutorials ? Please help me ...

I am using the MSSQL Server 8.0 .

thanks
Pinto

View 1 Replies View Related

File Creation

Dec 15, 2007


Hi!

I have one package (Primary) that calls 4 Packages(1,2,3,4) throw an SQL Server Connection.
That 4 packages create 4 distinct files from a a Streamwriter.
The files area created in a Script component

I call the execution of the packages from an Web Page that calls the job an execute the package Primary.

The first two packages (1,2) create the file and everithing goes ok.

The third one(3) "blows up" with the exception:

System.NullReferenceException: Object reference not set to an instance of an object. at Microsoft.SqlServer.Dts.Pipeline.ScriptComponentHost.HandleUserException(Exception e) at Microsoft.SqlServer.Dts.Pipeline.ScriptComponentHost.ProcessInput(Int32 inputID, PipelineBuffer buffer) at Microsoft.SqlServer.Dts.Pipeline.ManagedComponentHost.HostProcessInput(IDTSManagedComponentWrapper90 wrapper, Int32 inputID, IDTSBuffer90 pDTSBuffer, IntPtr bufferWirePacket)

The next try that i made was to comment in the package Primary the execution of the packages 1,2 and run the package 3,4.

The package 3 run ok and the package 4 blows up with


"System.ArgumentOutOfRangeException: Index and length must refer to a location within the string. Parameter name: length at Microsoft.SqlServer.Dts.Pipeline.ScriptComponentHost.HandleUserException(Exception e) at Microsoft.SqlServer.Dts.Pipeline.ScriptComponentHost.ProcessInput(Int32 inputID, PipelineBuffer buffer) at Microsoft.SqlServer.Dts.Pipeline.ManagedComponentHost.HostProcessInput(IDTSManagedComponentWrapper90 wrapper, Int32 inputID, IDTSBuffer90 pDTSBuffer, IntPtr bufferWirePacket)"

The next try that i made was to comment in the package Primary the execution of the packages 1,2,3 and run the package 4.

It run Ok.

When the package 3 and 4 blows up they create the file but they don't write.

In all the executions that i made i deleted the files that were created.

When I run the packages from the development solution and using file system connection everything runs.

Here is the code of the script component:


Imports System

Imports System.Data

Imports System.Math

Imports Microsoft.SqlServer.Dts.Pipeline.Wrapper

Imports Microsoft.SqlServer.Dts.Runtime.Wrapper

Imports System.IO

Public Class ScriptMain

Inherits UserComponent



Dim directorio As String

Private textwriter As StreamWriter

Private separador As String = ";"

Private cabecalho As Boolean = True

Dim linha As String = ""




Public Overrides Sub PreExecute()

directorio = Trim(Variables.Directory) & Trim(Variables.FileName)

textwriter = New StreamWriter(directorio, False)

End Sub

Public Overrides Sub Input0_ProcessInputRow(ByVal Row As Input0Buffer)



If cabecalho Then

Dim DataProc As String = Row.var1

Dim DataInf As String = Row.var2
DataProc = DataProc.Substring(0, 4) _

& "/" & DataProc.Substring(4, 2) _

& "/" & DataProc.Substring(6, 2)

DataInf = DataInf.Substring(0, 4) _

& "/" & DataInf.Substring(4, 2) _

& "/" & DataInf.Substring(6, 2)



textwriter.WriteLine(Variables.var3 _

& separador & Trim(var1) _

& separador & Trim(var2)



cabecalho = False

End If





Dim var7 As String = ""

If Not Row.var7_IsNull Then

var7 = Row.var7.ToString

End If


With textwriter



linha = Trim(Row.var1) _

& separador & Trim(DataProc) _

& separador & Trim(DataInf ) _

& separador & Trim(var7)


.WriteLine(linha)

End With

End Sub


Public Overrides Sub PostExecute()

textwriter.Close()



End Sub

End Class

In the four Script Components the code is the same only change the value of the variables.

I'm sorry for my English and the variables here in the code were changed so it can be an error in the variables but forget that.

Can anyone help me!?

View 7 Replies View Related

Regarding XBRL File Creation

Sep 27, 2007

Hi ALL
   I want create XBRL file from database table.Does any have help me about this??

View 1 Replies View Related

FTP File Creation Date

Oct 3, 2007

I have a script that is utilizing an FTP task to retrieve files from a Windows FTP site without any issues.
I need to check the dates of the files on the FTP site prior to downloading them as I only need files that have been modified. Since these files are hundreds of MB in size, downloading them first and them checking the date is not an optimal approach.
Can somebody please help me figure out how to check the creation dates of the files on the remote FTP directory?
Thanks!

View 15 Replies View Related

Dynamic Flat File Creation!

May 14, 2008

I'm trying to read the folder which has flat files and transform it and put it another folder with the SAME original name.
I created a For Eachloop containter and assign it to variable infile. In the data flow I added some transform and flat file destination. currently its reading 3 files and output is only one file.
I would like to create dynamic flat file connection so that it'll create separate files (same name) in different folder.
Thanks,

View 5 Replies View Related

Dynamic Flat File Creation

Mar 19, 2008



Hi All,


I'm new to SSIS. I have a small problem. In our system we are trying to create flat files based on data from returned from different SQL stored procedures. The configuration settings for creating the flat files are stored in a SQL table.

For example, the config table will look like below :

Feed Id Feed Name Feed File Name Feed Stored Procedure Name
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1 Biz C:Biz.txt dvx_GetBiz
2 PG C:PG.csv dvx_GetPG
3 NexT C:NexT.txt dvx_GetNexT
4 Amez C:Amez.csv dvx_GetAmez

The problem is dvx_GetBiz, dvx_GetPG,... all have different number and types of columns. So, I'm not able to create a dynamic Flat File destination depending on the columns returned from the corresponding stored procedure.

Is there a way to accomplish this ?

Pl. help.

Awaiting someones reply ASAP.

Thanks & Regards,
Vidya.




View 4 Replies View Related

SQL Alert Triggered By Text File Creation

Oct 22, 2001

I would like to know how to config SQL Server 2000 Alert to be triggered by new file creation (i.e. txt file).

Maybe by monitoring windows 2000 log file (not sure)??

Any help or suggestion will be highly appreciated.

View 2 Replies View Related

Need A Help For Executing Script File Having Creation Of Stored Procedure From C#

Jan 9, 2008

 Hi,While executing script file from c# i have faced a problems like 1)Error at Go statement2) Must declare a scalar variable "@prmEvent" The following approach i have followed to executing script file. SqlConnection conn = new SqlConnection(); conn.ConnectionString = "server=localhost;initial catalog=Parish;Integrated Security=SSPI;";conn.Open(); string commandText = GetCommandText("Script file name"); SqlCommand databaseCmd = new SqlCommand(commandText, conn); databaseCmd.ExecuteNonQuery(); GetCommandTex()  method reads the script file from starting to end and returns script text.  My script file having following script.set ANSI_NULLS ONset QUOTED_IDENTIFIER ONGoif exists (select 1 from dbo.sysobjects where id = Object_id('dbo.[prcSearchEvents]') and (type = 'P' or type = 'RF'))begin drop proc dbo.[prcSearchEvents]endGoCREATE PROCEDURE [dbo].[prcSearchEvents]@prmStartDate datetime,  @prmEndDate datetime,@prmEvent char(1)ASBEGIN    SELECT Title,FirstName,MiddleName,LastName,S.SexName as Sex, (CASE @prmEvent WHEN 'B' THEN DateOfBirth             WHEN 'D' THEN DateOfDeath             WHEN 'M' THEN DateOfMarriage         END ) as EventDate    from dbo.Parishioner P    left outer join dbo.Sex S on P.SexId = S.SexId    where (CASE @prmEvent WHEN 'B' THEN DateOfBirth             WHEN 'D' THEN DateOfDeath             WHEN 'M' THEN DateOfMarriage         END )    between @prmStartDate and @prmEndDate   END  But when i executing script file  having creation of stored procedure , i got such problem but other cases ( having normal sql commands) did not get any problm 

View 1 Replies View Related

SQL Server 2008 :: Creation Of XML File With Data In Table

Jun 1, 2015

I want to create a XML file with data in my table. I have a question about tags.

SELECT
-- Root element attributes
'http://tempuri.org/Form.xsd' AS 'xmlns',
'http://www.w3.org/2001/XMLSchema-instance' AS 'xmlns:xsd',
(
SELECT
-- Creating a default element

[Code] ....

This is my query. When I use 'xmlns' namespace the result is below:

<Form xmlns="http://tempuri.org/Form.xsd" xmlns:xsd="http://www.w3.org/2001/XMLSchema-instance">
<Veri xmlns="">
<Satir>
<Id>1</Id>
</Satir>
</Veri>
</Form>

I dont want to see 'xmlns' in 'Veri' tag. When I use xmlna or another word instead of 'xmlns' the result is below:

<Form xmlns="http://tempuri.org/Form.xsd" xmlna:xsd="http://www.w3.org/2001/XMLSchema-instance">
<Veri>
<Satir>
<Id>1</Id>
</Satir>
</Veri>
</Form>

How can I remove 'xmlns' from 'Veri' tag while using it in 'Form' tag

View 2 Replies View Related

Wrap Database Insert And System.IO File Creation In One Transaction?!

Mar 4, 2007

i am creating/uploading a new file on the webserver, and if it is successfully i want to insert a record in the database (with the filename).is there a way to create a transaction for this so that if either operation fails they both fail?

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved