effective date marks the start the original start of membership. So
in the case of memkey 001 he started on 2006-11-01, stopped on
2007-12-01, restarted on 2007-02-02 and stopped again on 2/5/2007.
memkeys 004,005 and 006 don't have NO status changes.
presuming that we should never have a status code of restart without a
stop but that the data may have violations of that.
How can I query my tables to return every date of ACTIVE participation
during two dates?
So for example if I say give participations criterias of 11/7/2006
and 2/7/2007, it should pull two records for memkey 001 as follows
I am used to run SQL server 2005 RDBMS with Visual studio 205 for development. recently, i wanted to try it with the inbuilt sql server express and being able to run the membership query / membership functionality. the proble is that i couldn't run the query using 'aspnet_regsql' from command prompt. It always throw error. please, can anybody help me out. Any suggestion will be highly appreciated and welcome. Kayode Banjo
I'm a relative newbie to ASP.NET development (web development in general) so please forgive the ignorance. ;-) Ok, I'm using VWD to design and test my application and I'm using the standard membership provider system. I've read in various places not to muck around with the aspnet_* tables as it can cause havoc hehe. Therefore, I've created my own Member table to accommodate more fields that the aspnet_Users table does not have (since I don't want to mess around with that table) such as address, city, town, zip, birth date, etc. Obviously, I have a field in Member that corresponds to the userId primary key in aspnet_Users. Now, there are times when I need to display the username of a person's profile on a page. SELECT aspnet_Users.UserName<br>FROM aspnet_Users, Member<br>WHERE querystringid=Member.memberId AND Member.userId = aspnet_Users.UserId Now, this seems fine and dandy when there are few entries in the aspnet_Users table, but what if I tried that query when aspnet_Users grew to a hypothetical one million entries?? Does anyone know if those fields in aspnet_Users are properly indexed? I can't seem to determine one way or another with VWD's database explorer. I don't want to run the risk of a full table scan. But if those fields aren't indexed, I don't know if I should modify that table in any way. What to do? TIA
In my site, when a user registers, I need to create rows in additional tables besides aspnet_Users. So, I need to be able to pass the generated userId guid to subsequent SqlCommands. I'm having a terrible time with this. What's the correct way to set up a SqlParameter so that it will accept a guid? I keep getting this error: "Conversion failed when converting from a character string to uniqueidentifier." I've tried creating the parameter both with and without a SqlDbType. cmd.Parameters.AddWithValue(paramName, guid); and SqlParameter p = new SqlParameter(paramName);p.SqlDbType = SqlDbType.Guid;cmd.Parameters.Add(p); and I get the same error either way. Driving me nuts! Any help appreciated.
I want to know if it is possible to connect from classic ASP to a SQL 2005 database, and if so, can someone provide a sample connection string, I'm not sure if it is my connection string or server config. Thanks, Ed.
I'm trying to move from MSDE to SQL Everywhere in my project, which requires using of ADO classic and i have some problems storing ntext data in SQLEv database using parametrized command.
Could it be that the problem is because of ADO classic? Is it ok to use old ADO with SQLEv OLEDB provider and will compatibility with old ADO be maintained in SQLEv?
Below is JScript code illustrating the situation: ------------------------------- var oConn = new ActiveXObject("ADODB.Connection"); oConn.Open(sConnStr); var oCmd = new ActiveXObject("ADODB.Command"); oCmd.ActiveConnection = oConn; var sText = "test text"; oConn.Execute("create table tblTest(sText ntext)"); oCmd.CommandText = "insert into tblTest(sText) values(?)"; oCmd.Parameters(0).Value = sText; oCmd.Parameters(0).Size = sText.length; oCmd.Execute(); ------------------------------- It gives me 'Microsoft SQL Server 2005 Everywhere Edition OLE DB Provider: The given type name was unrecognized. [,,,,,]'.
If i remove 'oCmd.Parameters(0).Size = sText.length;' error changes to 'Insufficient memory to complete the operation.'
Migrating a site to a new server. Moved data to SQLExpress. Changed connection string to point to SQLExpress and now I am getting this error. Microsoft OLE DB Provider for SQL Server error '80004005' Cannot open database "PHCSQL" requested by the login. The login failed. /func/inc_DatabaseFunctions.inc, line 5 Do I need to do permissions differently than MSDE?Did connection strings change?Help?
hi,i'm using classic asp to try and connect to a sqlexpress database on a development server. i get the following error:
Microsoft OLE DB Provider for SQL Server (0x80004005) [DBNETLIB][ConnectionOpen (Connect()).]SQL Server does not exist or access denied. /dbtest.asp, line 8
I'm using the following script which runs fine against a regular SQL server (version 8) on the network.
sql = "SELECT product_code FROM products WHERE product_type = 1";
var results= conn.Execute(sql).GetString(); Response.write(unescape(results)); %>
I have tried changing Data Source to servernameSQLEXPRESS, changing initial catalog to master, using a user name defined on the database and changing the provider to SQLNCLI but nothing has worked.
Anyone got any idea what I'm doing wrong? Using ASP.Net is not an option.
Is there a way, other than simply changing the format of the SRS report, to create an old fashond Paged style report - similar to the ones you can get from Crystal Reports?
I have a Classic ASP page that provides me a view on Orders posted by customer for a selected month and year from a SQL Server 2000 database. This ASP page has a Stored Procedure that returns the orders posted by month and year. However, my needs are to be able to display the view by month, day and year to month, day and year, For example January 15, 2008 to February 14, 2008.
The current Classic ASP page has a dropdown to select the month and year from this dropdown only displays months and years for the months and years the customer had posted orders.
What I’d like to know is how to add to the classic asp page the means to input a date range on the fly that would return the report by month, day, year to month, day, year.
I am trying to return multiple recordsets to a classic ASP web page from SQL Server 2005 and then use GetRows() in ASP to fill 2 arrays with the data. I'm using a command object to run a stored procedure which performs 2 simple selects in SQL Server. The stored procedure works fine in SQL Server Management Studio so I'm guessing it's an ADO issue.
The ASP code looks like this: strConnect = "DRIVER={SQL Native Client};SERVER=MyServer.IsAtMyIsp.com;DATABASE=MyDb;UID=Me;PWD=MyPwd; MARS Connection=True;"
Set conn = Server.CreateObject("ADODB.Connection") conn.ConnectionString = strConnect conn.Open
Set objCommand = Server.CreateObject("ADODB.Command") Set objRecordset = Server.CreateObject("ADODB.Recordset") Set objRs = Server.CreateObject("ADODB.Recordset")
If Len(strBeginDate) And IsDate(strBeginDate) Then .Parameters.Append .CreateParameter("@i_DateStart",adDate,adParamInput,,strBeginDate) If Len(strEndDate) And IsDate(strEndDate) Then .Parameters.Append .CreateParameter("@i_DateEnd",adDate,adParamInput,,strEndDate) End If End If End With
I'm considering shifting my database server to 64-bit MS SQL Server 2005 for improved scalability and performance. I'm concerned, however, that my classic ASP website (which sits on a separate server) may have problems communicating via ADO/OLEDB because of communication problems between 32-bit IIS on the web server and 64-bit MS SQL Server on the database server.
My current set up (which works fine) is:
Web Server: Windows Server 2003, Standard Edition, SP1 - running IIS with a set of ASP websites Database Server: Windows 2000 SP4, running MS SQL Server 2000
Connection String:
MyConnection="Provider=SQLOLEDB;Network Library=DBMSSOCN;SERVER=192.168.0.1;INITIAL CATALOG=MyDatabase;UID=MyUserID;PWD=MyPassword" Set Conn = Server.CreateObject("ADODB.Connection") Conn.Open MyConnection
My core question is:
If I change my database server to new machine with 64-bit Windows Server 2003 running 64-bit MS SQL Server 2005, will my (32-bit) web server be able to connect from ASP as it does now?
Hello, We are re-writing our site in asp.net using sql server. Most of the site uses asp classic and it was to an access database. During the conversion we have everything working correct to SQL Server except for the asp.net connection string. There is an important part of the application using asp.net which works fine with our connection string to the access database. To recap our problem is the connection string from asp.net to sql server. This code works fine for the asp.net to access in the web.cnfg file </microsoft.web> <connectionStrings> <add name="SalesConnectionString" connectionString="Provider=Microsoft.Jet.OLEDB.4.0;Data Source=E:inetpubvhosts hemarketingvp.comsubdomainsvphttpdocsfpdbsalesMain.mdb" providerName="System.Data.OleDb"/> <add name="ODBCSalesConnectionString" connectionString="DRIVER={Microsoft Access Driver (*.mdb)};DBQ=URL=E:inetpubvhosts hemarketingvp.comsubdomainsvphttpdocsfpdbsalesMain.mdb"/> <add name="RawConnectionString" connectionString="Provider=Microsoft.Jet.OLEDB.4.0;Data Source=E:inetpubvhosts hemarketingvp.comsubdomainsvphttpdocsfpdbsalesMain.mdb" providerName="System.Data.OleDb"/> <add name="ConnectionString" connectionString="Data Source=.SQLEXPRESS;AttachDbFilename=|DataDirectory|inventoryStatus.mdf;Integrated Security=True;Connect Timeout=30;User Instance=True" providerName="System.Data.SqlClient"/> </connectionStrings> <system.web> The code in the global.asa which works fine for classic asp to sql server also works fine and is as follows '--Project Data Connection Application("sales_ConnectionString") = "Driver={SQL Native Client};Server=DMSERVER01;Database=SQLsalesMain;UID=nTrack;PWD=nTrack2k3" Application("sales_ConnectionTimeout") = 15 Application("sales_CommandTimeout") = 30 Application("sales_CursorLocation") = 3 Application("sales_RuntimeUserName") = "" Application("sales_RuntimePassword") = "" Our programmer who set this up is out for a couple of weeks and I would appreciate any help in the correct connection string from asp.net to the sql server database in the web.cnfg file Thanks
I have a project (using classic ASP & SQL Server) which adds one execute sql statement at a time to a temporary array, and then I join that array with a chr(30) (record separator), to a string variable called strSQL. I then run the following line of code:
conn.execute(strSQL)
I was wondering if there was any limitation to how large the strSQL variable can be? Reason I ask is because thru log writes I can see all of my sql execute lines exist in the variable strSQL prior to running the "conn.execute(strSQL)" command; however, not all of the lines run at the time of execution. Remember, this bug only is occuring whenever I have say over 600 sql lines to execute.
My understanding is that there was no limitation on the size of the string strSQL; however, in the interest of getting the bug fixed quick enough, I decided to just run a loop for each sql statment and run "conn.execute(strSQL)" every 50 times. This, in turn, has solved the problem and I do save all of my data; however, my original bug still exists.
Does anyone know why I have to split the sql commands and execute.com every 50 times instead of just being able to do it once ?
Used the same connection string and DSN (i.e pointing to the same database/server) in both environments. ASP works in Test Environment. Fails in Production Environment.
Test and Production have same versions of software.
Environment Details:
OS: Windows 2003 SP2 MDAC: 2.8 Database: HP Neoview
I migrated my SQL Server 7 database to the new SQL Server 2005 that I installed on my PC. I have classic ASP programs on my PC that used to access the SQL Server 7 database. However, global.asa and these ASP programs can no longer connect to the new SS 2005 database.
The application is running ADO (MDAC) version 2.81.1117.0.
The application gets an recordset created by SQLServer by an select statement. In this case the recordset is empty.
The application adds a record to the recordset by AddNew(). Works fine. But when assigning the first field (smalldatetime in database) I get ADO error -2147217887.
I have inspected the recordset and I found a difference between the working one from SQLServer2000 and the new one from SQLServer2005: The Attributes item for the fields in the recordset has the flag adFldUnknownUpdatable set in the working SQL2000 version but is not set from SQL2005.
The database on SQL2005 is copied from the SQL2000 system and attatched to the SQL2005 system. I Have checket that the compability flag for the database on the SQL2005 system is set to SQL2000 compability.
Hi all, First ASP.NET project - please be gentle ! OK. Ready to add personalisation and membership. I have VS2005 Professional, including SQL Server 2005 developer, but I understand that VS2005 defaults to creating a local SQL Express file in the App_Data directory and that suits me just fine for now. Unfortunately I can't get VS to create it for me and the ASP.NET Configuration tool complains it can't connect to the database. First, some REALLY dumb questions to show how little I really know ...
if the application is using a SQL Express file, does the SQL Server 2005 process need to be started in order to access the local database file (or does it just get opened like an access database) does the Broswer process need to be started - this is all just running on my local machine when I finally publish this site on my hosted service I could do with understanding what will need to be done to get THAT database accessed ... maybe cross that bridge later I can go to the VS command prompt and run aspnet_regsql.exe in wizard mode. Going through the steps on that I could give it my SQL Server 2005 server name (after I start it) but that's not what I'm trying to do. I just want it to create and connect to a local file in the App_Data. machine.config shows ... <connectionStrings> <add name="LocalSqlServer" connectionString="data source=.SQLEXPRESS;Integrated Security=SSPI;AttachDBFilename=|DataDirectory|aspnetdb.mdf;User Instance=true" providerName="System.Data.SqlClient" /> <!-- <add name="LocalSql2005" connectionString="Data Source=MICKSPCSSLMJ;Initial Catalog=aspnetdb;Integrated Security=True" providerName="System.Data.SqlClient" /> --> </connectionStrings> The commented connection string I used to temporarily prove that I could access SQL2005. It's no longer used and I've put the other references back to "LocalSqlServer" as below ... <membership> <providers> <add name="AspNetSqlMembershipProvider" type="System.Web.Security.SqlMembershipProvider, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" connectionStringName="LocalSqlServer" enablePasswordRetrieval="false" enablePasswordReset="true" requiresQuestionAndAnswer="true" applicationName="/" requiresUniqueEmail="false" passwordFormat="Hashed" maxInvalidPasswordAttempts="5" minRequiredPasswordLength="7" minRequiredNonalphanumericCharacters="1" passwordAttemptWindow="10" passwordStrengthRegularExpression="" /> </providers> </membership> <profile> <providers> <add name="AspNetSqlProfileProvider" connectionStringName="LocalSqlServer" applicationName="/" type="System.Web.Profile.SqlProfileProvider, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" /> </providers> </profile> <roleManager> <providers> <add name="AspNetSqlRoleProvider" connectionStringName="LocalSqlServer" applicationName="/" type="System.Web.Security.SqlRoleProvider, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" /> <add name="AspNetWindowsTokenRoleProvider" applicationName="/" type="System.Web.Security.WindowsTokenRoleProvider, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" /> </providers> </roleManager>The profile provider is clearly pointing to "LocalSqlServer" which in turn points to : connectionString="data source=.SQLEXPRESS;Integrated Security=SSPI;AttachDBFilename=|DataDirectory|aspnetdb.mdf;User Instance=true" What am I missing please ?
I have a two problems. First is connecting to my sql server 2005 express with my sql account. Every time i try to configure data source to connect to my db on server using my windows auth. it works and when i try using my sql account i get error, User is not associated with a secure SQL Server connection. Second, how can i configure my application to store membership, roles, user data in a database on my server like /Servername/SQLEPRESS/mydbname and not to App_Data/ASPNETDB. Tnx in adv.
I recently moved my .NET project out to production, the server is Windows 2003 running SQL 2005. My developement server was a Windows XP running SQL 2005. Here is my issue. Under development I created a specific user to log in as, created a role and specified exactly what application specific stored procedures etc. that user was allowed access to. Everything worked fine. Backing that database up and restoring it to the new server, when I attempt to log in as the user (and yes I re-created the login, with the user, just as I did on the development server), I get this error... EXECUTE permission denied on object 'aspnet_CheckSchemaVersion', database 'MoldKit', schema 'dbo'. So I attempt to login as SA, and everything works... so I assign the db_owner role to my user and login, everything works... problem being they shouldn't be db_owner. And they're most definitely not assigned this role on development. I even went so far as to delete the database, and recreate it from scratch using the aspnet_regsql.exe and I get the same error. Anyone have any idea why this is happening, or the proper roles I need to assign so the user isn't a dbo, but can still call all the required aspnet procedures. Or could this be some other issue caused by 2003? I've seen this error in a lot of posts, but never once saw a definiative answer to what causes it and and what the fix is.
I have just recovered data from a hard drive crash. I installed a fresh copy of Windows Server 2003 with sp2. Have SQL Standard Running with sp2, and VS 2005 standard running sp1. I have several webs on this server, was able to get most up and running fine, but one web and database cannot make the connection after recovery. I had to reapply permissions and folder security to all webs, and change provided dbo privaledges to network_services. However I am still getting the following error: Server Error in '/bpe' Application.-------------------------------------------------------------------------------- The EXECUTE permission was denied on the object 'aspnet_CheckSchemaVersion', database 'Fitness1stDb', schema 'dbo'. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.SqlClient.SqlException: The EXECUTE permission was denied on the object 'aspnet_CheckSchemaVersion', database 'Fitness1stDb', schema 'dbo'. Source Error: An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below. Stack Trace: [SqlException (0x80131904): The EXECUTE permission was denied on the object 'aspnet_CheckSchemaVersion', database 'Fitness1stDb', schema 'dbo'.] System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection) +857354 System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) +734966 System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) +188 System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj) +1838 System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString) +149 System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async) +886 System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, DbAsyncResult result) +132 System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(DbAsyncResult result, String methodName, Boolean sendToPipe) +415 System.Data.SqlClient.SqlCommand.ExecuteNonQuery() +135 System.Web.Util.SecUtility.CheckSchemaVersion(ProviderBase provider, SqlConnection connection, String[] features, String version, Int32& schemaVersionCheck) +367 System.Web.Security.SqlMembershipProvider.CheckSchemaVersion(SqlConnection connection) +85 System.Web.Security.SqlMembershipProvider.GetPasswordWithFormat(String username, Boolean updateLastLoginActivityDate, Int32& status, String& password, Int32& passwordFormat, String& passwordSalt, Int32& failedPasswordAttemptCount, Int32& failedPasswordAnswerAttemptCount, Boolean& isApproved, DateTime& lastLoginDate, DateTime& lastActivityDate) +1121 System.Web.Security.SqlMembershipProvider.CheckPassword(String username, String password, Boolean updateLastLoginActivityDate, Boolean failIfNotApproved, String& salt, Int32& passwordFormat) +105 System.Web.Security.SqlMembershipProvider.CheckPassword(String username, String password, Boolean updateLastLoginActivityDate, Boolean failIfNotApproved) +42 System.Web.Security.SqlMembershipProvider.ValidateUser(String username, String password) +83 System.Web.UI.WebControls.Login.OnAuthenticate(AuthenticateEventArgs e) +160 System.Web.UI.WebControls.Login.AttemptLogin() +105 System.Web.UI.WebControls.Login.OnBubbleEvent(Object source, EventArgs e) +99 System.Web.UI.Control.RaiseBubbleEvent(Object source, EventArgs args) +35 System.Web.UI.WebControls.Button.OnCommand(CommandEventArgs e) +115 System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument) +163 System.Web.UI.WebControls.Button.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument) +7 System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument) +11 System.Web.UI.Page.RaisePostBackEvent(NameValueCollection postData) +33 System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +5102
--------------------------------------------------------------------------------Version Information: Microsoft .NET Framework Version:2.0.50727.42; ASP.NET Version:2.0.50727.42
I am trying to add membership to my site. i use visual web developer and the set controls. i.e. login etc. I also used the asp web config tool which is where my test users are. Everything works locally. but when i upload it and try to log on I get this error message: Server Error in '/' Application.
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.SqlClient.SqlException: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below. Stack Trace:
[SqlException (0x80131904): An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)] System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) +735043 System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) +188 System.Data.SqlClient.TdsParser.Connect(Boolean& useFailoverPartner, Boolean& failoverDemandDone, String host, String failoverPartner, String protocol, SqlInternalConnectionTds connHandler, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, SqlConnection owningObject, Boolean aliasLookup) +820 System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance) +628 System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance) +170 System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection) +130 System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options) +28 System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject) +424 System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject) +66 System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject) +496 System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) +82 System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) +105 System.Data.SqlClient.SqlConnection.Open() +111 System.Web.DataAccess.SqlConnectionHolder.Open(HttpContext context, Boolean revertImpersonate) +84 System.Web.DataAccess.SqlConnectionHelper.GetConnection(String connectionString, Boolean revertImpersonation) +197 System.Web.Security.SqlMembershipProvider.GetPasswordWithFormat(String username, Boolean updateLastLoginActivityDate, Int32& status, String& password, Int32& passwordFormat, String& passwordSalt, Int32& failedPasswordAttemptCount, Int32& failedPasswordAnswerAttemptCount, Boolean& isApproved, DateTime& lastLoginDate, DateTime& lastActivityDate) +1121 System.Web.Security.SqlMembershipProvider.CheckPassword(String username, String password, Boolean updateLastLoginActivityDate, Boolean failIfNotApproved, String& salt, Int32& passwordFormat) +105 System.Web.Security.SqlMembershipProvider.CheckPassword(String username, String password, Boolean updateLastLoginActivityDate, Boolean failIfNotApproved) +42 System.Web.Security.SqlMembershipProvider.ValidateUser(String username, String password) +83 System.Web.UI.WebControls.Login.OnAuthenticate(AuthenticateEventArgs e) +160 System.Web.UI.WebControls.Login.AttemptLogin() +105 System.Web.UI.WebControls.Login.OnBubbleEvent(Object source, EventArgs e) +99 System.Web.UI.Control.RaiseBubbleEvent(Object source, EventArgs args) +35 System.Web.UI.WebControls.Button.OnCommand(CommandEventArgs e) +115 System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument) +163 System.Web.UI.WebControls.Button.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument) +7 System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument) +11 System.Web.UI.Page.RaisePostBackEvent(NameValueCollection postData) +33 System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +5102 Can anyone out ther please help me with this. thanksNick
Version Information: Microsoft .NET Framework Version:2.0.50727.42; ASP.NET Version:2.0.50727.210
Hello, I am using the Membership application for my project. In the database (MS SQL 2005) the program created alot of SPs for the Membership, Roles, Profiles .... Is there a function to return a list of users that are online? There is this function aspnet_Membership_GetNumberOfUsersOnline and aspnet_Membership_GetAllUsers. What i want is a Table with the usernames of all the users that are online in my application. No page index, just a big table with all the online users. I need to get all the usernames for another SP that i just build. Any ideas?
Hello, I have an ASP.NET Membership Database that exists on a remote server. I have been using this database as I developed my ASP.NET 2.0 application locally. When I attempted to promote my ASP.NET 2.0 application to production, I am unable to connect to that same remote database. Oddly, there is another database on that same remote server that I can access from my ASP.NET application in both development and production. Can anyone explain to me what could cause this? Thank you!
I need to create a membership database that includes levels and premiums for each level. Can anyone offer any examples of how this should be done? What tables I would need and how they would be related to each other?
Almost have my custom membershipprovider finsihed, but have ran into a small snag.Scenario:: 2 methods. CreateUser(blah blah) and ValidateUserName(string username). CreateUserWizard control calls CreateUser(blah blah) which in the start of the method calls ValidateUserName(string username). ValidateUserName runs a stored procedure on SQL 2k to check and see if user exists in the db. Returns a bool true or false. If true, then everything works correctly and returns a message displaying that the user exists, please enter a different name.Now the problem. If it returns false, meaning that the username doesnt exist and is available to use, it calls a stored procedure to create the record in the users db. This is where the problem lies. It does NOTHING but sit there waiting. But it never seems to time out. If I comment out the validating. It will add a record successfully.Im wondering if it has something to do with calling 2 stored procedures consecutivly????::CODE TO FOLLOW::
on the login properties i see a third option under security access - Grant access - Deny access - Through group membership
what is the third one? I tried to change it to grant access but it doesn't let me. Neither can I uncheked a database box on 'Database Access tab'. It says DB owner cannot be dropped.
I am attempting to follow the instructions: Walkthrough: Creating a Web Site with Membership and User Login (Visual Studio) When I attempt to create a membership user with the ASP.NET Configuration wizard nothing happens - it attempts to launch my browser and if I am not connected to the intenet it insists on connecting. If I am connected then nothing happens - it is as if I clicked on air. A wizard is supposed to launch so that I can set up users. Any help would be appreciated - I am really trying to get to creating an application that authenticates users for admitance to a restricted area in a website. Thanks!
Decided to try testing SqlCacheDependency and got the following.... thoughts???After using the following code...void Application_Start(object sender, EventArgs e) { System.Data.SqlClient.SqlDependency.Start (ConfigurationManager.ConnectionStrings["testConnectionString"].ConnectionString); }//-------------------------------- ... then more code SqlCommand sqlCommand = new SqlCommand("select ApplicationName from dbo.aspnet_Applications", sqlConnection); SqlCacheDependency sqlCacheDependency = new SqlCacheDependency(sqlCommand);//-------------------------------- ... then more codeMembershipUser membershipUser = Membership.CreateUser(defaultUserNameTextbox.Text, defaultUserPasswordTextbox.Text); if (membershipUser != null) {//----------------------------- ... more codethe above code no longer works giving the below exception : using a plain database generated using the following statement
I have a site with roles/membership working fine on my local machine, but I am having serious trouble deploying it to a shared host. My hosting provides a sql 2000 database, but the user created for it that I use is not dbo. I am errors when I try to access my site such as Could not find stored procedure 'dbo.aspnet_CheckSchemaVersion'The procedure was created under my user, so it's there, but it's full name ia myusername.aspnet_CheckSchemaVersionHow can I tell the asp.net membership/role provider to use my username instead of dbo when it looks for objects? Thanks
Hi, I am running a project that has a custom membership flow. I need to use the local SQL Express Membership instead. In orderer to achieve this, I have added the following lines in my web.config: in the membership section: <add name="AspNetSqlMembershipProvider" type="System.Web.Security.SqlMembershipProvider, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" connectionStringName="LocalSqlServer" enablePasswordRetrieval="false" enablePasswordReset="true" requiresQuestionAndAnswer="true" applicationName="/" requiresUniqueEmail="false" passwordFormat="Hashed" maxInvalidPasswordAttempts="5" passwordAttemptWindow="10" passwordStrengthRegularExpression="" /> in the connectionStrings section:<add name="LocalSqlServer" connectionString="data source=.SQLEXPRESS;Integrated Security=SSPI;AttachDBFilename=|DataDirectory|aspnetdb.mdf;User Instance=true" providerName="System.Data.SqlClient" />
Problem : When I am opening ASP.NET Configuration > Security I have the following error message: There is a problem with your selected data store. This can be caused by an invalid server name or credentials, or by insufficient permission. It can also be caused by the role manager feature not being enabled. Click the button below to be redirected to a page where you can choose a new data store. The following message may help in diagnosing the problem: Object reference not set to an instance of an object.
