Is there an INF file or a registry entry for the client network utility that I can move from machine to machine? I hate having to re-enter all of my SQL servers and alias' every time I install Tools on a new machine...Any help is greatly appreciated!!
View 1 RepliesI'm getting errors in EM when trying to connect to one of my registered servers. When the Client Network utility is using TCP/IP as the default protocol I get:
A connection could not be established to xxxxx - General network error. Check your network
documentation. ConnectionOpen (connect())...
But if I switch to use Named Pipes I connect just fine.
This worked just fine up until last week.. We're going through Tokenring to Ethernet conversions.. Is this a bigger network issue?
Thanks..
(SQL Server7, NT4)
Were upgrading our server with SP3. Do the end users using the SQL server client network utility need SP3?
Hi Folks,
I'm having to move workstations and was wondering if anybody knew a quick way to move all the alias's from your client network utility from one workstation to another.
Cheers
Hi,
Iam installing the SQL Express Edition with Advance Services. Using Command prompt.
start /wait setup.exe /qb SECURITYMODE=SQL DISABLENETWORKPROTOCOLS=0 SAPWD=mypassword ADDLOCAL=SQL_Engine,SQL_Data_Files,SQL_Replication,SQL_FullText,Client_Components,Connectivity,SDK,SQL_SSMSEE
after installing the SQL Express. The Named Pipes and tcp/ip is in disable protocols only.
How do i enble the named pipes and tcp/ip through the command line installtion.
Thanks
Kiran
2 Questions:
1) I am getting back into SQL more than before, in my new job. I need to find the service pack installed on the clients who have the Client Network Utility installed. I do not remember how to do this.
2) Running 'Select @@VERSION' on the server returns 7.00.1063 but does not indicate the service pack. Does this still mean sp4 has been installed?
I'm trying to ensure we'll all up to date since our dual 700 procs are acting eratic...jumps between 10 - 95% or so.
Server info:
NT Server SP6
SQL 7.0
2GB Ram
2 procs @ 700Mhz
Roughly 80 network connections.
No other programs running on server except Antivirus.
Thank you!
Hello,I have SQL Server 2000 Developer Edition. Where is SQL Server NetworkUtility?In Start menu SQL server group I have only Client Network Utility :|Is it a command line tool or sth? How to install it?tnx--STEFAN
View 2 Replies View RelatedWhen i open the server network utility window, it doesn't show any protocols in Enabled protocols and Disabled protocols.:shocked:
I have sql server 200 with sp4. pls can anyone solve my issue.
thanx and regards
kiran
Could someone please explain to me the client configuration utility in plain English please.
I have VB applications installed on the sales force`s laptops that log onto SQL Server through RAS and an ODBC connection. The client configuration utility is not installed on their machines, but everything works fine.
The BOL say that when installing utilities, the user is given the option of selecting the net-library to use. I am not, when installing it on my NT Workstation, or W95 Operating system.
The BOL also state that the control panel has an entry to allow selecting which protocol to use. I cannot see it
Who needs the client configuration utility installed, obviously not the clients, is it just the people who want enterprise manager on their desktops ?
I am completely confused by this application
This is the one area of SQL Server where I am lost, help !
Anyone know of any kind of little script or utility that can be placed on an end users PC to backup a specific database whenever they want? All I want it to do is to name it according to the date, place it in a predefined directory, and tell the user that it worked or failed. I am not very good at programing. Also, this is MS SQL 7. This tool needs to be fairly idiot proof. Any ideas?
Thanks,
Tim
I'm trying to call the SQL 2012 SSIS packages deployed in SSISDB from batch files from another client system. But I couldn't find the DTExec.exe file in the 110Binn folder. How can I install this utility? Can I get this utility with client installation or do I need to install Server components which need license. I donot have license to install server component. how to install the DTExec utility without any licensing and provide me the Setup link where I can download and install.
View 0 Replies View Related
Hi all,
What is client network and server network alias in SQL server.
when and why we should use that mean what is the requirement of ALIAS in SQL Server.
Thanks
I'm sure this is rediculously simple, but I am totally new to sql. We are upgrading our practice management software to an edition which requires sql to be installed on our Win2003 file DC server and 18 client computers, all running xp-sp2. New software comes with an option to automatically install MSDE but I would like to try sql05 express instead, which they support if it is pre-installed on the server and all workstations. We meet all necessary sql05-exp requirements. After spending several hours online and downloading 05 books online, etc I beleive I understand how to set up the file server where the data resides, but I am now confused about what exactly I am to install on the client computers. Clients have .net 2.0 installed. I see no option to download specific "Client" software, just sql05 server express edition sp1, management studio express, and express edition toolkit sp1. Are you supposed to just run the server ed sp1 on each workstation, enable tcp/ip, and tell it to connect to the server's sql database, and if so, doesn't that leave a sql 'server' running on each workstation? Other documentation mentions installing the toolkit and connecting to the server, but I've found nothing which explains this simple procedure everyone must do, so I know I'm missing the obvious. Please help and Thanks.
View 1 Replies View RelatedPLATFORM VERSION INFO
Windows : 5.1.2600.131072 (Win32NT)
Common Language Runtime : 2.0.50727.42
System.Deployment.dll : 2.0.50727.42 (RTM.050727-4200)
mscorwks.dll : 2.0.50727.42 (RTM.050727-4200)
dfdll.dll : 2.0.50727.42 (RTM.050727-4200)
dfshim.dll : 2.0.50727.42 (RTM.050727-4200)
SOURCES
Deployment url : http://webdev.ci.lubbock.tx.us/ReportServer$SQL05/ReportBuilder/ReportBuilder.application
ERROR SUMMARY
Below is a summary of the errors, details of these errors are listed later in the log.
* Activation of http://webdev.ci.lubbock.tx.us/ReportServer$SQL05/ReportBuilder/ReportBuilder.application resulted in exception. Following failure messages were detected:
+ Downloading http://webdev.ci.lubbock.tx.us/ReportServer$SQL05/ReportBuilder/ReportBuilder.application did not succeed.
+ The remote server returned an error: (401) Unauthorized.
COMPONENT STORE TRANSACTION FAILURE SUMMARY
No transaction error was detected.
WARNINGS
There were no warnings during this operation.
OPERATION PROGRESS STATUS
* [4/10/2006 11:34:29 AM] : Activation of http://webdev.ci.lubbock.tx.us/ReportServer$SQL05/ReportBuilder/ReportBuilder.application has started.
ERROR DETAILS
Following errors were detected during this operation.
* [4/10/2006 11:34:29 AM] System.Deployment.Application.DeploymentDownloadException (Unknown subtype)
- Downloading http://webdev.ci.lubbock.tx.us/ReportServer$SQL05/ReportBuilder/ReportBuilder.application did not succeed.
- Source: System.Deployment
- Stack trace:
at System.Deployment.Application.SystemNetDownloader.DownloadSingleFile(DownloadQueueItem next)
at System.Deployment.Application.SystemNetDownloader.DownloadAllFiles()
at System.Deployment.Application.FileDownloader.Download(SubscriptionState subState)
at System.Deployment.Application.DownloadManager.DownloadManifestAsRawFile(Uri& sourceUri, String targetPath, IDownloadNotification notification, DownloadOptions options, ServerInformation& serverInformation)
at System.Deployment.Application.DownloadManager.DownloadDeploymentManifestDirectBypass(SubscriptionStore subStore, Uri& sourceUri, TempFile& tempFile, SubscriptionState& subState, IDownloadNotification notification, DownloadOptions options, ServerInformation& serverInformation)
at System.Deployment.Application.DownloadManager.DownloadDeploymentManifestBypass(SubscriptionStore subStore, Uri& sourceUri, TempFile& tempFile, SubscriptionState& subState, IDownloadNotification notification, DownloadOptions options)
at System.Deployment.Application.ApplicationActivator.PerformDeploymentActivation(Uri activationUri, Boolean isShortcut)
at System.Deployment.Application.ApplicationActivator.ActivateDeploymentWorker(Object state)
--- Inner Exception ---
System.Net.WebException
- The remote server returned an error: (401) Unauthorized.
- Source: System
- Stack trace:
at System.Net.HttpWebRequest.GetResponse()
at System.Deployment.Application.SystemNetDownloader.DownloadSingleFile(DownloadQueueItem next)
COMPONENT STORE TRANSACTION DETAILS
No transaction information is available.
Does anyone know how that I can get the reportbuilder.application to run on a client on the network. It seems that if I have to remote into the actual server to get the report builder to work would be pointless for users on the network. I get the 401 Unauthorized all the time. Any comments would help.
Jordanb412
I have a question regarding the nature of virtual sql servers, specificially what protocol is used to communicate to the server when a request is made by a client.
For example, if a scheduled job is run on the virtual sql server, what determines the protocol used (e.g. TCP/IP, named pipes etc.) by SQL Server agent? Is it the client network alias set up on the virtual server?
I am asking because currently the client aliases on some of our virtual sql servers are using named pipes and I think this is causing a problem with our backups.
Thanks,
Adrian.
I can't map other sql servers without creating alias with proper port number on client network utility. Other users using same version of the client tools, MMC, SQL DMF etc. I need to map 70 sql servers on using my client tools.
Any help is appreciated.
thanks,
Hi All,
I've developed an application that connects to a SQL Server 2005 Express database. I created a DSN to connect to the database through ODBC. Currently, I am testing locally and everything works fine.
I would now like to install my application on another workstation and connect remotely to the database located on my development machine.
The client workstation does not have SQL Server 2005 Express installed on it because I would just like my application to connect remotely by creating the DSN and using ODBC. What I'm missing here are the database drivers. The "SQL Natice Client" is not available on this client workstation. How can I deploy the necessary drivers with my installation file so that I may create the required DSN name using the SQL Native Client driver?
Thanks!
Does anyone has a script/exe for periodic file deletion, using date comparison?
------------------------
I think, therefore I am - Rene Descartes
Does anyone happen to know if there is a raw file reader utility available? One of my processes drops a couple of interim raw files and I'd like to be able to look at the data in them in a columnar format without having to run a downstream data flow with a reader inserted.
View 8 Replies View RelatedHello peopleI have an issue with the Bulk Copy Program-utility.When I execute the BCP in the commandline, it will create a CSV-file.Code in commandline:
Code Block
bcp.exe PCVO.dbo.tblOpleidingen out "C:planning.csv" -c -t";", -eE:Rakoerror.log -Uxx -Pxx -Sservername
Code in stored procedure:
Code Block
USE [PCVO]
GO
/****** Object: StoredProcedure [dbo].[sp_ExportAccessToCSV] Script Date: 01/19/2008 16:36:20 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
ALTER PROCEDURE [dbo].[sp_ExportAccessToCSV]
AS
BEGIN
-- SET NOCOUNT ON added to prevent extra result sets from
-- interfering with SELECT statements.
SET NOCOUNT ON;
DECLARE @sql varchar(8000)
SET @sql = 'bcp.exe PCVO.dbo.tblOpleidingen
out "C:planning.csv" -c -t";", -eE:Rakoerror.log -Uxx -Pxx -S' + @@servername
EXEC xp_cmdshell @sql
END
Code in C#-application:
Code Block
String connectionString = "Data Source=THUIS-LENNY\SQLEXPRESS;Initial Catalog=PCVO; Integrated Security=True";
System.Data.SqlClient.SqlConnection con = new System.Data.SqlClient.SqlConnection(connectionString);
con.Open();
System.Data.SqlClient.SqlCommand da = new System.Data.SqlClient.SqlCommand("sp_ExportAccessToCSV", con);
da.CommandType = CommandType.StoredProcedure;
da.ExecuteNonQuery();
When I use the BCP-utility inside a stored procedure (called in a C#-application),using the xp-cmdshell, I can't find the created file. I even don't get an error or warning message.Can somebody help me?Thanks in advance,G VossiusNB: I'm using SQL Server 2005, Visual Studio 2008 C# EE
Hello people
I have an issue with the Bulk Copy Program-utility.
When I execute the BCP in the commandline, it will create a CSV-file.
Code in commandline:
Code Blockbcp.exe PCVO.dbo.tblOpleidingen out "C:planning.csv" -c -t";", -eE:Rakoerror.log -Uxx -Pxx -Sservername
Code in stored procedure:
Code Block
USE [PCVO]
GO
/****** Object: StoredProcedure [dbo].[sp_ExportAccessToCSV] Script Date: 01/19/2008 16:36:20 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
ALTER PROCEDURE [dbo].[sp_ExportAccessToCSV]
AS
BEGIN
-- SET NOCOUNT ON added to prevent extra result sets from
-- interfering with SELECT statements.
SET NOCOUNT ON;
DECLARE @sql varchar(8000)
SET @sql = 'bcp.exe PCVO.dbo.tblOpleidingen
out "C:planning.csv" -c -t";", -eE:Rakoerror.log -Uxx -Pxx -S' + @@servername
EXEC xp_cmdshell @sql
END
Code in C#-application:
Code Block
String connectionString = "Data Source=THUIS-LENNY\SQLEXPRESS;Initial Catalog=PCVO; Integrated Security=True";
System.Data.SqlClient.SqlConnection con = new System.Data.SqlClient.SqlConnection(connectionString);
con.Open();
System.Data.SqlClient.SqlCommand da = new System.Data.SqlClient.SqlCommand("sp_ExportAccessToCSV", con);
da.CommandType = CommandType.StoredProcedure;
da.ExecuteNonQuery();
When I use the BCP-utility inside a stored procedure (called in a C#-application),
using the xp-cmdshell, I can't find the created file. I even don't get an error or warning message.
Can somebody help me?
Thanks in advance,
G Vossius
NB: I'm using SQL Server 2005, Visual Studio 2008 C# EE
Hi,I have dumped a very large database from mysql (using mysqldump program)as a raw sql file. The reason was, convert this database to a MSSQLdatabase. Since mysqldump creates the file as raw sql file with thedatabase-table structures and the data in it, I thought using OSQL commandline utilities should work to out this whole database in MSSQL server.I have run this command from command line:osql -u sa -i mysqldump.sqlIt is going since yesterday. It has been almost 36 hours that it'sstarted. And in the mssql server, I see no database created yet. On thescreen of the command line, I see bunch of numbers are going in order. Iassume they are row numbers of the tables processed. But, if it is doing it,then where is it saving all this data ? I have checked the tempdb, pub db,other dbs, and I see no tables related to the database I am inserting. Willit populate it at the and of the job ? Or, am I doing something wrong here?Regards.Murtix.
View 2 Replies View RelatedHi,
We are trying to create a deployment utility for a solution. The issue we are facing is, we are using a single package configuration file and when we try to build the solution to create the deployment utility, the build process fails saying that the package configuration file already exists. THe reason for this is while trying to build, the utility copies the configation fiel for the packages, it copies for one, but for the second onward, when it tries to copies, it fails saying the file already exists.
Any idea how to overcome this, or else any suggestions how to perform the similar steps to create a deployment utility for a solution in which the packages share a single package configuration file.
Any suggestion would be really appreciated.
Thanks in Advance,
Manish Singh
I am able to run SSIS packages as SQL Server Agent jobs with a Control Flow items "File system task", if I move a file (test.txt) from a drive (c on the server (where SQL Agent jobs run) to a subdirectory on the same drive. But, if I try to move a file on a network drive, the package fail.
What I can do to solve this issue.
Bye!
Daniel
I am running my package in sql server 2012, in which i am giving network path for flat file destination. And its working fine. But if i give m local path, its giving me error " cannot open data file" ...
Nothing is wrong with package.
yes,I have an error, like 'The database file may be corrupted. Run the repair utility to check the database file. [ Database name = SDMMC Storage Cardwinpos_2005WINPOS2005.sdf ]' .I develope a program for Pocket Pcs and this program's database sometimes corrupt.what can i do?please help me
View 4 Replies View RelatedI am getting following error when "CreateDeploymentUtility" is set to true and I try building the solution. It tries to copy a file that already exits in inDeployment folder. I am using Sept. CTP.
View 4 Replies View RelatedI need the file created by my BCP QUERYOUT command I'm executing from XP_CmdShell in Transact-SQL to have a specific OWNER. I've tried using the sp_xp_cmdshell_proxy_account to setup the correct owner. The owner is always SERVERNAMEAdministrators.
thanks,
jim
How to use Microsoft Data Link(Udl) type file to connect with SQL Server using SQL Native Client,If i use OLDEDB Connection i can make connection using UDL file with Database ,but how can i use a file for a connection using SQL Native Client.Is there any other data link file that can be used to connect with SQL server using SQL Native Client.
View 5 Replies View Related
Hi,
I have installed SQL server 2005 in my machine. Now when we restore the database, I have check the size of database file .mdf/.ldf is very large. So now I wants to place these two files in any other machine in network.
But when I try to do the same, I am getting "Error 5110: network device not supported for database files.".
Please anyone guide me about the process. So that I can place these 2 files in another machine in network or any sharepoint.
Thanks
Regards,
Nipun
Hi,
How can I read a file placed in a shared folder on a network from MS SQL Server Stored Procedure.
Thanks.
Hi,
How can I read a file placed in a shared folder on a network from MS SQL Server Stored Procedure. Is there any kind of set-up I have to do. Can someone please help I am very new SQL Server stuff.
Thanks.
Hello,
I have Sql Server in one pc and I want to attach one databse that is in another computer that doesnt have SQL Server. Sql Server doesnt permit UNC path when attaching database files. Is there anyway to workarounf this. Is Trace Flag 1807 of any use?
Thanks