Cluster:Win2003_R2_X64_SP1+SQL2000Enterprised_SP4, SQL2000 Can Not Run On NodeB,Why?
Nov 8, 2006
1、A win2003 Cluster has two node:Node A and NodeB.
2、There are two group on Cluster:
GroupA:ClusterIP,ClusterName,ClusterDisk;
GruopB:SQLServer,DataDisk;
3、The problem is :
GruopA can switch between Node A and NodeB freely;but GruopB can not switch to NodeB,Why?
(1) NodeB's Application event log:
Event ID 17052:[sqsrvres] ODBC sqldriverconnect failed
Event ID 17052:[sqsrvres] checkODBCConnectError:sqlstate=IM002;native error=0;message=[Microsoft][ODBC driver manager]datasource not found and no default driver.
Thanks for your help!
View 3 Replies
ADVERTISEMENT
Aug 6, 2006
Please answer following questions?
1-Before installing microsoft cluster+SQL Virtual Server I should install normal installation of SQL2000 on both nodes.
2-I have 8x72 GB Ultra320 SCSI in MSA1500 storagebox. What is your recommendation how should I make drives and which RAID system for quroum,DB (db is almost 5 to 10 GB), and T-Log should I use?
3-I have only one database instance, so still I should configure MSDTC or no need?
4- Can I use the same drive and cluster group for Quorum and MSDTC?
5-On windows 2003 when SQL virtual server will finish installation. Then the SQL SP4 I should install on one node or I have to install it one by one on all nodes of the cluster.I am using Active/Passive scenario.
Pls reply my questions.Then I will start my projetct.....
View 2 Replies
View Related
Jul 23, 2005
Is it possible to create Fail-over Cluster with 64-bit (Itanium2) and 32-bit (Intel Xeon) nodes?
View 2 Replies
View Related
Oct 13, 2006
is there such a paper? if so, can you pls point me to it? thx in advance
View 4 Replies
View Related
Sep 17, 2006
i have sql2000 & sql2005 on the same machine. I am unable to register my localhost in sql2000, get an access denied error. How can I make my localhost use sql2000 database?
View 1 Replies
View Related
Oct 10, 2015
During the installation of Adding node to a SQL Server failover cluster(On passive node) getting error like.. The MOF compiler could not connect with the WMI server. This is either because of a semantic error such as an incompatibility with the existing WMI repository or an actual error such as the failure of the WMI server to start.We run the below commands but didn’t get any resolution & got the same above error .
1<sup>st</sup> Method…
1. Open console command (Run->CMD with administrator privileges).
2. net stop winmgmt
3. Rename folder %windir%System32WbemRepository to other one, for backup purposes (for example _Repository).
4. net start winmgmt
2<sup>nd</sup> Method..
1. Disable and stop the WMI service.
a) Command : - sc config winmgmt start= disabled
b. Command : - net stop winmgmt
2. Run the following commands.
a). Command: Winmgmt /salvagerepository %windir%System32wbem
b). Command: Winmgmt /resetrepository %windir%System32wbem
3. Re-enable the WMI service
Command: sc config winmgmt start= auto
Last command to run after above steps
4. Command: mofcomp "%programfiles(x86)%Microsoft SQL Server100Sharedsqlmgmproviderxpsp2up.mof"
File not found Error for above command.
View 3 Replies
View Related
Jun 10, 2015
I am in the process of moving databases from a SQL 2005 Standard version to a 2-node 2014 cluster.All of my 2005 databases back up successfully.They all restore without issue except for one database that has a full text catalog. I get this message
Msg 7610, Level 16, State 1, Line 2
Access is denied to "fileStoragedataMSSQLSERVERFullTextCatalog", or the path is invalid.
Msg 3156, Level 16, State 50, Line 2
File 'sysft_FTCatalog' cannot be restored to 'fileStoragedataMSSQLSERVERFullTextCatalog'. Use WITH MOVE to identify a valid location for the file.
Msg 3119, Level 16, State 1, Line 2
Problems were identified while planning for the RESTORE statement. Previous messages provide details.
Msg 3013, Level 16, State 1, Line 2
RESTORE DATABASE is terminating abnormally.
[code]....
I went as far as giving the folder full access to everyone temporarily and received the same error.
View 1 Replies
View Related
Apr 10, 2014
I ran the Advanced cluster preparation for a new sql instance on an existing cluster.
Slq Server 2012.
After is completed, it was successful, I realized I specified the wrong Instance Root directory.
Is it possible to remove what the preparation installed? Or is it possible to change the root directory?
View 3 Replies
View Related
Jul 6, 2015
Can I build a cluster by adding the cluster service, then the SQL instances, then add the other nodes and their passive SQL instances?I would lean to building the cluster first, the add the SQL instances.
View 4 Replies
View Related
Feb 18, 2014
I´ve been reading that SQL Server 2012 Always On is dependent on having a Windows Failover Cluster setup. Is that correct ?
View 6 Replies
View Related
Nov 6, 2014
I have following script which i am planning to run to drop all non-clustered primary keys on a database and then created as clustered. I am using someone else's script so don't know how to modify this. Some of primary key columns are used in references in other tables.
is there anyway i can drop the existing primary keys and using their original script then create again as clustered including restoring all foreign and reference keys and unique or no unique.
DECLARE @table NVARCHAR(512), @tablename NVARCHAR(512),
@sql NVARCHAR(MAX), @sql2 NVARCHAR(MAX), @sql3 NVARCHAR(MAX),
@column NVARCHAR(MAX);
DECLARE @indexname NVARCHAR(512);
SELECT name As 'Table'
[Code] ....
View 8 Replies
View Related
Oct 8, 2015
can we join a node in a windows cluster which is already in a different cluster?
We have this requirement as we need to setup readable secondary ( always on AG) on the third node.
View 2 Replies
View Related
Jul 15, 2015
We are planning to change all IPs of PRODUCTION Failover Cluster Setup. In my cluster setup ... we have 2 Physical Nodes with windows-2008, Roles are MSDTC and SQL-2008R2.
IP change for:
1. Both Nodes(Physical)
2. MSDTC
3. SQL Server
4. windows Cluster
So Almost... All IPs are going to change.
Im DBA here, I need to take care of SQL cluster and MSDTC. But I haven't performed this activity before.So I'm worrying about Impacts and consequences of this change. steps how should I perform this activity.
View 9 Replies
View Related
May 20, 2003
Hi all,
We have many tables which have cluster index on column with datatype 'Char(200)'.
Does anyone have script to change cluster index to noncluster for all user tables which have clustered index on a column with 'char(200)' datatype.
Thanks,
Deepak
View 2 Replies
View Related
Jul 26, 2015
Wanted to know about difference between cluster and non cluster index with example.
When to use cluster index and non cluster index .
View 3 Replies
View Related
Jun 10, 2015
CREATE TABLE [dbo].[Access](
[AdminID] [int] NOT NULL,
[FnID] [int] NOT NULL,
CONSTRAINT [PK_AccessFn] PRIMARY KEY NONCLUSTERED
[Code] ....
why the cluster and non cluster indexed created on the same key?
View 3 Replies
View Related
May 13, 2008
i am in the process of Migrating SQL 2000 to my new SQL2000 server i want to know the what would the best way for me to migrate one SQL server to another SQL server on the same network and rename the new server to the old server and bring it up for use in our ecommerce website.
View 10 Replies
View Related
Jul 17, 2000
I am trying to upgrade a SQL Server 6.5(Cluster) to SQL Serevr 7.0 (Cluster)..I already have an intsllation of 7.0(On a Cluster),so this means that 6.5 and sql 7 are on seperate cluster's ,if i try to upgrade from 6.5 Cluster to 7.0 Cluster is asks me to uncluster 6.5 and 7.0 is this correct ,assume i cannot break the cluster then what???.. what is the best way i can achieve this functinality.....
thanks in advance
Jack
View 1 Replies
View Related
May 8, 2007
Hi
We are planning to upgrade the SQL Server in our production environment from SQL Server 2000 to SQL Server 2005. This is a 4 Node cluster environment with 3 Databases on 3 Virtual instances. The main requirement is to achieve this with no/minimal downtime.
Could you please suggest or direct me to any documentation for the best practices used to upgrade such an environment?
Thanks
Priyanka
View 2 Replies
View Related
Aug 30, 2006
We have (had) an active/active cluster. 2 physical machines,
each running their own instance, clustered together. Node1/Ins1 and Node2/Ins2.
Node2 failed and Ins2 failed over to Node1 as it should. Node2 required that we
rebuild the server (rebuild = reinstall O/S). Now we need to get Node2 back
into the cluster and get Ins2 failed back over to Node2.
Does anyone know, for certain, the correct steps to accomplish this? Obviously,
we could backup everything and completely destroy Ins2 and recreate it on Node2
then rejoin the cluster. But I'm looking for something less destructive.
Is it possible to reinstall SQL, then rejoin the cluster, and then fail Node2
over? Or will there be registry conflictions?
Any help would be appreciated. Also, if you have any links to some official
documentation, that would be great too.
Thanks
View 4 Replies
View Related
Dec 28, 2007
We're upgrading a SQL Server 2000 cluster (Active/Passive) running on Windows 2000 Server to a SQL Server 2005 Cluster running on Windows Server 2003. We can't purchase new hardware and we have no spare hardware. We also need to move from Windows 2000 Server to Windows 2003 Server at the same time. We want to keep downtime to a bare minimum.
What we were thinking was the following steps... Anyone try this?
1. Break the link between the servers.
2. Install a fresh copy of windows 2003 server on one side along with SQL Server 2005. While this step is running, the active node would still be live on Windows 2000 Server and SQL Server 2000 serving our customers.
3. Restore a copy of a backup from the active production side to the node we're upgrading and at that point we would bring the active node down, switching the active node to be the newly upgraded server.
4. As a final step, the old active node would now have the link to it broken, we would install a fresh copy of windows 2003 server on it and sql server 2005. At this point we would bring it back into the cluster and the cluster would be complete again.
Thoughts?
View 2 Replies
View Related
May 14, 2008
Friends -
Need your help and guidence for doing upgrading SQL Server 2000 Cluster to SQL Server 2005 Cluster.
Let me explain my current environment.
1. Currently SQL Server 2000 Cluster environment is running on Windows 2000 Server we need to upgrade this to SQL Server 2005 on Windows 2003 Server. >>> Production environment.
My Plans:
1. On Testing Environment Install SQL Server 2000 cluster on Windows 2003 Server and do a restore of databases from the produciton environment.
2. Upgrade In-Place from SQL Server 2000 Cluster to SQL Server 2005 Cluster.
My doubts
1. Can i install SQL Server 2000 Cluster on Windows 2003 Server. Is it possible or not.
Please advise me and correct my steps.
Cheers
VSH
View 1 Replies
View Related
Jun 13, 2007
Can the SQL Cluster Virtual IP be the same as the cluster IP?
Can I set up the cluster like:
Node 1:10.0.0.1
Node 2:10.0.0.2
MSCS Shared:10.0.0.3
SQL Virtual:10.0.0.3
or do they need to be unique?
View 1 Replies
View Related
Jul 4, 2007
I have two Windows 2000 servers (Advance Edition) to form a Windows Cluster. I also install MS SQL 2000 Enterprise Edition on the cluster to form a MS SQL cluster. Now, I want to upgrade the hardware and OS (but keep on using SQL 2000), so I install Windows 2003 server Enterprise Edition on two new servers to form a new Windows Cluster. I am planing to install MS SQL 2000 Enterprise Edition on the new cluster, so the old SQL cluster and new SQL cluster are side by side. I would like to know how to setup a new SQL cluster (I know it has problem to rename SQL Cluster name, so how to fix this problem)? And how to transfer everything (such as system databases, users database, sql user account, password and maintenance plan jobs etc) from old SQL cluster to new SQL cluster? And how to switch over from old SQL cluster to new SQL cluster?
Thanks a lot !
View 8 Replies
View Related
Mar 14, 2008
According to microsoft, we can cluster SSIS service but it is NOT RECOMMENDED.
http://msdn2.microsoft.com/en-us/library/ms345193.aspx
Now this is the situation that I have where I need to understand how SSIS works?
Enviornment: Active Active cluster enviornment for SQL server with SSIS server installed as stand alone as default on both node.
Name: Node 1 Node 2
--------- -------------- ---------------------
Server name: Nd1 Nd2
SQL server name: cs-nd1in01 cs-nd2in02
SSIS server name: Nd1 Nd2
BTW, this is cosolidated enviornment so there are more than one application expected and resides on each instance of SQL server.
The question is around SSIS, what would be the best practice to develop SSIS package that can work with above envoinrment.
Secnario: What if my Nd1 fails. SQL server cs-nd1IN01 will be failover to Nd2 and it will be available. But How about SSIS packages? How that understands
to use Nd2 SSIS as Nd1 SSIS is not available. Is anyone has similar experience to setup SSIS in cluster envionrment but as non-cluster service?
Please help. Thanks in adavance.
View 1 Replies
View Related
May 15, 2008
Friends -
Could any one of you provide steps for upgrading SQL Server 2000 cluster to SQL server 2005 cluster.
My environment is Windows 2003 server.
Appreciate your support.
Cheers
VSH
View 1 Replies
View Related
Sep 5, 2006
Hi,I have made a web application using SQL Server 2005
Express with a few admin pages that require login. I used the SQL
Server Managment Studio Express to setup users and groups and it works
fine. But the web server has SQL Server 2000 and all I get is a
user id and password to access the database. It seems I cannot use the
Login control I put on my "login.aspx" page becuase it uses the
integrated authentication which chokes on 2000. I am afraid I wonlt be
able to use some of the 2.0 features such as profiles, ... Is
this the way 2.0 works with SQL Server 2000? Should I ditch the ISP if
they only give me a single access to database with no provisions to
create users. (I was told I had to create a "Users" table and manually
assign ids and passwords and that I can only use the user id and
password they supplied to setup the connection string in the script.)I appreciate your help.
View 2 Replies
View Related
Mar 8, 2001
Does anyone know when SP1 will be available for SQL2000??
Thanks,
Steve Bajada
View 1 Replies
View Related
Oct 23, 2000
Are there any advantages/disadvantages of running SQL2K on NT4 as opposed to running on WIN2K?
View 1 Replies
View Related
Jan 7, 2008
pls tell me abt log shipping in sql2000
View 1 Replies
View Related
Jul 13, 2006
I am developing a Crystal Reports App in VS2005 (VB). I was originally working on an XP machine with MSDE and stored procedures where it worked fine.
I then transferred the development to a Win2003 machine with SQL2000 and am now getting the following error;
Failed to open a rowset. Description: 'Get_Calls_By_MLO_Date' expects parameter '@DT1' which was not supplied. Plus some other error detail.
Here is the SP.
CREATE PROCEDURE Get_Calls_By_MLO_By_Date @DT1 datetime, @DT2 datetimeASSELECT MLO, CallNo, DT, Type FROM ActionsWHERE dt >= @DT1 AND dt <= @DT2 AND ActionID=1 ORDER BY MLO, DTGO
If I transfer everything back to the XP machine it works fine.
Any ideas?
Thanks
Terry.
View 3 Replies
View Related
Jun 1, 2007
How to lock a Row in SQL2000 so that nobody can select that row.
I applied ROWLOCK, but i am not finding the way.
My query is "SELECT * FROM tablename WITH (ROWLOCK)"
Is this the correct way to write locks.
I would be thankful if u help me
View 2 Replies
View Related
Apr 18, 2006
I am exporting data to an Excel file via a scheduled DTS package. I need to be able to either overwrite the existing Excel file or delete it. I haven't found a way to do this yet. Any help, comments, or direction will be appreciated. TIA
Paul
View 1 Replies
View Related