From what I've been reading is that the order of clustering sql servers is: cluster Windows first then install SQL. Can it be done vice versa? We have a production sql 2005 server and now 'd like to cluster it. Problem is that it has not been configured for Windows clustering.
Any ideas, thoughts, suggestions..? Thank you in advance.
I am an oracle dba who has had to take on SQL Server DBA duties.I have configured the operating system and verified the cluster for a Windows 2008R2 Active / Passive Cluster
.
I am now going to install the SQL Server Instance and build my database on the first node. Do you know of a great link to a procedure that defines the steps in performing this phase of the installation?Also, do you know of a good link to a checklist for testing the sql cluster once the databases are installed?
I have a Cluster environment that has SQL 2000 Enterprise installed. I would like to install SQL 2005 Enterprise as well. What should I watch out for. Do I need to specify a named instance for the 05 install, setup is giving me the option and does see the 2000 instance? Is there a document that walks through this installation?
Regards
Hi Friends,
I have a question. At my home computer i downloaded and installed VWD. As usual it also installed Sqlexpress as part of the installation(i checked the option). Later on i downloaded Management studio separately so i am fine with my home computer as every thing is free.
But at work we decided to develop application using VS 2005 and Sqlserver 2005. So we bought and installed VS2005 professional edition at work and it also installed Sqlexpress during the installation as a defualt desktop engine. I am fine with that too. But i am not understing where do i get the Management studio? Is it some thing i could get it off the web for free or what? I am not sure we would have an option while installing the VS 2005 professional that also does install management studio and we need to check that option. I am not sure if we could get the management studion off the web for free and and evelop applications.
Please advise. Thanks -L
I want to find whether SQL Server 2005 x86 is installed or SQL Server 2005 x64 is installed programatically(Any API would do.) If anyone can recommend a registry key that I can rely on find whether it is a 32 bit or 64 bit SQL Server that would suffice.
View 5 Replies View RelatedDuring the installation of Adding node to a SQL Server failover cluster(On passive node) getting error like.. The MOF compiler could not connect with the WMI server. This is either because of a semantic error such as an incompatibility with the existing WMI repository or an actual error such as the failure of the WMI server to start.We run the below commands but didn’t get any resolution & got the same above error .
1<sup>st</sup> Method…
1. Open console command (Run->CMD with administrator privileges).
2. net stop winmgmt
3. Rename folder %windir%System32WbemRepository to other one, for backup purposes (for example _Repository).
4. net start winmgmt
2<sup>nd</sup> Method..
1. Disable and stop the WMI service.
a) Command : - sc config winmgmt start= disabled
b. Command : - net stop winmgmt
2. Run the following commands.
a). Command: Winmgmt /salvagerepository %windir%System32wbem
b). Command: Winmgmt /resetrepository %windir%System32wbem
3. Re-enable the WMI service
Command: sc config winmgmt start= auto
Last command to run after above steps
4. Command: mofcomp "%programfiles(x86)%Microsoft SQL Server100Sharedsqlmgmproviderxpsp2up.mof"
File not found Error for above command.
I am in the process of moving databases from a SQL 2005 Standard version to a 2-node 2014 cluster.All of my 2005 databases back up successfully.They all restore without issue except for one database that has a full text catalog. I get this message
Msg 7610, Level 16, State 1, Line 2
Access is denied to "fileStoragedataMSSQLSERVERFullTextCatalog", or the path is invalid.
Msg 3156, Level 16, State 50, Line 2
File 'sysft_FTCatalog' cannot be restored to 'fileStoragedataMSSQLSERVERFullTextCatalog'. Use WITH MOVE to identify a valid location for the file.
Msg 3119, Level 16, State 1, Line 2
Problems were identified while planning for the RESTORE statement. Previous messages provide details.
Msg 3013, Level 16, State 1, Line 2
RESTORE DATABASE is terminating abnormally.
[code]....
I went as far as giving the folder full access to everyone temporarily and received the same error.
I ran the Advanced cluster preparation for a new sql instance on an existing cluster.
Slq Server 2012.
After is completed, it was successful, I realized I specified the wrong Instance Root directory.
Is it possible to remove what the preparation installed? Or is it possible to change the root directory?
Can I build a cluster by adding the cluster service, then the SQL instances, then add the other nodes and their passive SQL instances?I would lean to building the cluster first, the add the SQL instances.
View 4 Replies View RelatedI´ve been reading that SQL Server 2012 Always On is dependent on having a Windows Failover Cluster setup. Is that correct ?
View 6 Replies View RelatedI have following script which i am planning to run to drop all non-clustered primary keys on a database and then created as clustered. I am using someone else's script so don't know how to modify this. Some of primary key columns are used in references in other tables.
is there anyway i can drop the existing primary keys and using their original script then create again as clustered including restoring all foreign and reference keys and unique or no unique.
DECLARE @table NVARCHAR(512), @tablename NVARCHAR(512),
@sql NVARCHAR(MAX), @sql2 NVARCHAR(MAX), @sql3 NVARCHAR(MAX),
@column NVARCHAR(MAX);
DECLARE @indexname NVARCHAR(512);
SELECT name As 'Table'
[Code] ....
can we join a node in a windows cluster which is already in a different cluster?
We have this requirement as we need to setup readable secondary ( always on AG) on the third node.
We are planning to change all IPs of PRODUCTION Failover Cluster Setup. In my cluster setup ... we have 2 Physical Nodes with windows-2008, Roles are MSDTC and SQL-2008R2.
IP change for:
1. Both Nodes(Physical)
2. MSDTC
3. SQL Server
4. windows Cluster
So Almost... All IPs are going to change.
Im DBA here, I need to take care of SQL cluster and MSDTC. But I haven't performed this activity before.So I'm worrying about Impacts and consequences of this change. steps how should I perform this activity.
Hi all,
We have many tables which have cluster index on column with datatype 'Char(200)'.
Does anyone have script to change cluster index to noncluster for all user tables which have clustered index on a column with 'char(200)' datatype.
Thanks,
Deepak
Wanted to know about difference between cluster and non cluster index with example.
When to use cluster index and non cluster index .
CREATE TABLE [dbo].[Access](
[AdminID] [int] NOT NULL,
[FnID] [int] NOT NULL,
CONSTRAINT [PK_AccessFn] PRIMARY KEY NONCLUSTERED
[Code] ....
why the cluster and non cluster indexed created on the same key?
I am trying to upgrade a SQL Server 6.5(Cluster) to SQL Serevr 7.0 (Cluster)..I already have an intsllation of 7.0(On a Cluster),so this means that 6.5 and sql 7 are on seperate cluster's ,if i try to upgrade from 6.5 Cluster to 7.0 Cluster is asks me to uncluster 6.5 and 7.0 is this correct ,assume i cannot break the cluster then what???.. what is the best way i can achieve this functinality.....
thanks in advance
Jack
Hi
We are planning to upgrade the SQL Server in our production environment from SQL Server 2000 to SQL Server 2005. This is a 4 Node cluster environment with 3 Databases on 3 Virtual instances. The main requirement is to achieve this with no/minimal downtime.
Could you please suggest or direct me to any documentation for the best practices used to upgrade such an environment?
Thanks
Priyanka
We have (had) an active/active cluster. 2 physical machines,
each running their own instance, clustered together. Node1/Ins1 and Node2/Ins2.
Node2 failed and Ins2 failed over to Node1 as it should. Node2 required that we
rebuild the server (rebuild = reinstall O/S). Now we need to get Node2 back
into the cluster and get Ins2 failed back over to Node2.
Does anyone know, for certain, the correct steps to accomplish this? Obviously,
we could backup everything and completely destroy Ins2 and recreate it on Node2
then rejoin the cluster. But I'm looking for something less destructive.
Is it possible to reinstall SQL, then rejoin the cluster, and then fail Node2
over? Or will there be registry conflictions?
Any help would be appreciated. Also, if you have any links to some official
documentation, that would be great too.
Thanks
We're upgrading a SQL Server 2000 cluster (Active/Passive) running on Windows 2000 Server to a SQL Server 2005 Cluster running on Windows Server 2003. We can't purchase new hardware and we have no spare hardware. We also need to move from Windows 2000 Server to Windows 2003 Server at the same time. We want to keep downtime to a bare minimum.
What we were thinking was the following steps... Anyone try this?
1. Break the link between the servers.
2. Install a fresh copy of windows 2003 server on one side along with SQL Server 2005. While this step is running, the active node would still be live on Windows 2000 Server and SQL Server 2000 serving our customers.
3. Restore a copy of a backup from the active production side to the node we're upgrading and at that point we would bring the active node down, switching the active node to be the newly upgraded server.
4. As a final step, the old active node would now have the link to it broken, we would install a fresh copy of windows 2003 server on it and sql server 2005. At this point we would bring it back into the cluster and the cluster would be complete again.
Thoughts?
Friends -
Need your help and guidence for doing upgrading SQL Server 2000 Cluster to SQL Server 2005 Cluster.
Let me explain my current environment.
1. Currently SQL Server 2000 Cluster environment is running on Windows 2000 Server we need to upgrade this to SQL Server 2005 on Windows 2003 Server. >>> Production environment.
My Plans:
1. On Testing Environment Install SQL Server 2000 cluster on Windows 2003 Server and do a restore of databases from the produciton environment.
2. Upgrade In-Place from SQL Server 2000 Cluster to SQL Server 2005 Cluster.
My doubts
1. Can i install SQL Server 2000 Cluster on Windows 2003 Server. Is it possible or not.
Please advise me and correct my steps.
Cheers
VSH
Can the SQL Cluster Virtual IP be the same as the cluster IP?
Can I set up the cluster like:
Node 1:10.0.0.1
Node 2:10.0.0.2
MSCS Shared:10.0.0.3
SQL Virtual:10.0.0.3
or do they need to be unique?
I have two Windows 2000 servers (Advance Edition) to form a Windows Cluster. I also install MS SQL 2000 Enterprise Edition on the cluster to form a MS SQL cluster. Now, I want to upgrade the hardware and OS (but keep on using SQL 2000), so I install Windows 2003 server Enterprise Edition on two new servers to form a new Windows Cluster. I am planing to install MS SQL 2000 Enterprise Edition on the new cluster, so the old SQL cluster and new SQL cluster are side by side. I would like to know how to setup a new SQL cluster (I know it has problem to rename SQL Cluster name, so how to fix this problem)? And how to transfer everything (such as system databases, users database, sql user account, password and maintenance plan jobs etc) from old SQL cluster to new SQL cluster? And how to switch over from old SQL cluster to new SQL cluster?
Thanks a lot !
According to microsoft, we can cluster SSIS service but it is NOT RECOMMENDED.
http://msdn2.microsoft.com/en-us/library/ms345193.aspx
Now this is the situation that I have where I need to understand how SSIS works?
Enviornment: Active Active cluster enviornment for SQL server with SSIS server installed as stand alone as default on both node.
Name: Node 1 Node 2
--------- -------------- ---------------------
Server name: Nd1 Nd2
SQL server name: cs-nd1in01 cs-nd2in02
SSIS server name: Nd1 Nd2
BTW, this is cosolidated enviornment so there are more than one application expected and resides on each instance of SQL server.
The question is around SSIS, what would be the best practice to develop SSIS package that can work with above envoinrment.
Secnario: What if my Nd1 fails. SQL server cs-nd1IN01 will be failover to Nd2 and it will be available. But How about SSIS packages? How that understands
to use Nd2 SSIS as Nd1 SSIS is not available. Is anyone has similar experience to setup SSIS in cluster envionrment but as non-cluster service?
Please help. Thanks in adavance.
Friends -
Could any one of you provide steps for upgrading SQL Server 2000 cluster to SQL server 2005 cluster.
My environment is Windows 2003 server.
Appreciate your support.
Cheers
VSH
Hi,
I'm just wondering how many people have gone to SQL 7 SP3.
Is it a case of only applying it if it fixes a particular problem you are experiencing, or have you installed it to keep with the latest version ?
Please let me have your thoughts (I'm currently running SP2).
Regards,
Tim
Hey all,
How do I install a SQL Server 2005 Express to have no instance?
I have a SQL 2005 Server Enterprise which has no instance, just the server name, even when pointing to the DB, you just use the server name and the DB name.
I am not any good in SQL, but need to configure SQL Express for a project I am busy with and would like it if I could only have a name, and not an instance.
hi friends,
in my system, just client tools were installed.i'm able to register to the other servers.but it is anot accepting to register my system. is there any thing to do?
How can you find out if Service Pack 1 (SP1) has been installed already or not?
- - - -
- Will -
- - - -
http://www.strohlsitedesign.com
http://www.servicerank.com/
I'm running Sharepoint server and Visual Studio on Windows server 2003. Sharepoint has its sql (officeServer) and Visual Studio installed sql express when it was installed. I can't connect to either one in VS or anywhere else. I wanted to install the adventureWorks sql database, so as to do SDK samples, and that didn't work either. I really don't understand what's going on with sql and how to use it. I can see both are running in the SQL configuration manager. Can anyone help?
View 1 Replies View RelatedHi-
I had previously had VS2005 Beta installed from my MSDN discs. When it expired, I uninstalled it and downloaded VWD Express to install. VWD installed fine, but the SQL Server Express will not install. The VWD install package doesn't give me any feedback, just says it failed. I tried dowloading and installing SQL Express separately, and it tells me that I have to uninstall all components from other versions. I have done that, but still wont install. If I use the uninstall utility on the website, it tells me it can't find any components, and all of the components listed in the manual uninstall instructions are missing, so I can't find anything further to uninstall. (FYI: I'm running XP Pro SP2).
I'm wondering if a registry setting or something didn't get updated on uninstall. I see a registry folder for "Microsoft SQL Server" but I do not know if this could be getting in the way.
Any help would be appreciated.
-Moz
Hi,
I am wondering how I can check which type of SQL Server 7 I have installed. (ie Standard/Enterprise etc) If I use @@version the following is returned:
Microsoft SQL Server 7.00 - 7.00.699 (Intel X86)
I know that the service pack number is incorporated into the version number above but I want to know the type of server I have running.
Any ideas on how I can get this information?
Cheers
Jan
I'm unable to install SQL Server 7 on Windows NT with SP5. I get
this error message:
Based on your selections setup has determined the following system
requirements are not met. Exit setup and install the missing requirements
from the CD or change your selections.
Windows NT 4.0 Service Pack 4 - needs to be reinstalled