Cluster Setup
Dec 5, 2006
We are on SQL Server 2000 A/A cluster and are moving to SQL Server 2005 cluster.
Following are the list of things before proceeding, please let me know if it needs any corrections and add-ons:
(side-by-side) Planning for new installation of SQL Server 2005 ( SQL2005INST1 and SQL2005INST2) on node1 and node2 and restoring the databases on SQL2005INST1 and SQL2005INST2 from respective 2000 instances.
1) SQL2005INST1
SQL Network Name
SQL IP address
2) SQL2005INST2
SQL Network Name
SQL IP address
As 2000 is already existing on the cluster.Want some clarity on following questions.
Can I keep the data files on the same disk as 2000 was using ?
Do I need to have new disk for the Quoram drive?
Under "Virtual Server Configuration" wizard during the setup under "Network to use"--- for "private cluster network" and "public cluster network" do that IP Address and network address and network subnet will be different from what we gave for SQL 2000.
Thanks
ITTECH
View 4 Replies
ADVERTISEMENT
Oct 10, 2015
During the installation of Adding node to a SQL Server failover cluster(On passive node) getting error like.. The MOF compiler could not connect with the WMI server. This is either because of a semantic error such as an incompatibility with the existing WMI repository or an actual error such as the failure of the WMI server to start.We  run the below commands but didn’t get any resolution & got the same above error .
Â
1<sup>st</sup> Method…
1. Open console command (Run->CMD with administrator privileges).Â
2. net stop winmgmtÂ
3. Rename folder %windir%System32WbemRepository to other one, for backup purposes (for example _Repository).Â
4. net start winmgmt
2<sup>nd</sup>Â Method..
1. Disable and stop the WMI service.
a) Command : - sc config winmgmt start= disabled
b. Command : - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â net stop winmgmt
2. Run the following commands.
a). Command: Winmgmt /salvagerepository %windir%System32wbem
b). Command: Â Winmgmt /resetrepository %windir%System32wbem
3. Re-enable the WMI service
Command:Â Â Â Â Â Â Â Â Â sc config winmgmt start= autoÂ
Last command to run after above steps
4. Command:Â Â Â Â mofcomp "%programfiles(x86)%Microsoft SQL Server100Sharedsqlmgmproviderxpsp2up.mof"
File not found Error for above command.
View 3 Replies
View Related
Jul 6, 2015
Can I build a cluster by adding the cluster service, then the SQL instances, then add the other nodes and their passive SQL instances?I would lean to building the cluster first, the add the SQL instances.
View 4 Replies
View Related
Mar 21, 2002
Hi,
I have 2 W2K box's and want to install 4 SQL servers on each box & each different character set and want to setup clustering (Active - passive).
Do any one of you setup this type environment ?, Pl. let me know if you have any suggestions ..
Regards,
Madhu
View 1 Replies
View Related
Jun 2, 2006
am trying to install sql 2005 with cluster option in win 2003 R2
servers
and keep getting sql database setup failed error.Summary log show that
it failed with error number 67.
It doesn't even create a SQLSetup0004_M2MTPONE_SQL.log file. core log
shows
Complete: DetectLocalBootstrapAction at: 2006/5/1 18:15:31, returned
true
Running: LaunchLocalBootstrapAction at: 2006/5/1 18:15:31
Error: Action "LaunchLocalBootstrapAction" threw an exception during
execution. Error information reported during run:
"C:Program FilesMicrosoft SQL Server90Setup Bootstrapsetup.exe"
finished and returned: 67
Aborting queue processing as nested installer has completed
Message pump returning: 67
We have two machines in running enterprises version of R2 in a cluster.
I tried running the setup from both machines and got the same error.
I am trying to find a solution for more than week but no luck. Any
help is appreciated.
thanks - Kailash
Part of Summary log:
--------------------------------------------------------------------------------
Machine : M2MTPONE
Product : Microsoft SQL Server 2005 Backward compatibility
Product Version : 8.05.1054
Install : Successful
Log File : C:Program FilesMicrosoft SQL Server90Setup
BootstrapLOGFilesSQLSetup0004_M2MTPONE_BackwardsCompat_1.log
--------------------------------------------------------------------------------
Machine : NEWTPNT1
Product : MSXML 6.0 Parser
Product Version : 6.00.3883.8
Install : Successful
Log File : \M2MTPONEC$Program FilesMicrosoft SQL
Server90Setup BootstrapLOGFilesSQLSetup0004_NEWTPNT1_MSXML6_1.log
--------------------------------------------------------------------------------
Machine : M2MTPONE
Product : MSXML 6.0 Parser
Product Version : 6.00.3883.8
Install : Successful
Log File : C:Program FilesMicrosoft SQL Server90Setup
BootstrapLOGFilesSQLSetup0004_M2MTPONE_MSXML6_1.log
--------------------------------------------------------------------------------
Machine : M2MTPONE
Product : Microsoft SQL Server 2005
Product Version : 9.00.1399.06
Install : Failed
Error Number : 67
--------------------------------------------------------------------------------
Machine : NEWTPNT1
Product : Microsoft SQL Server 2005
Product Version : 9.00.1399.06
Install : Failed
Error Number : 67
--------------------------------------------------------------------------------
SQL Server Setup failed. For more information, review the Setup log
file in %ProgramFiles%Microsoft SQL Server90Setup
BootstrapLOGSummary.txt.
Time : Thu Jun 01 18:18:54 2006
View 5 Replies
View Related
Oct 19, 2006
Installing SQl2005 into on Win2003 2 node cluster, at the very end of the
setup receive a message 'Remote Setup failed'. Referred to some sql logs
and found this;
Error: Action "LaunchLocalBootstrapAction" threw an exception during
execution. Error information reported during run:
"C:Program FilesMicrosoft SQL Server90Setup Bootstrapsetup.exe"
finished and returned: 1603
Aborting queue processing as nested installer has completed
Message pump returning: 1603
I've seen some similar errors on the web and suggestions about the Task
Scheduler being started on both nodes, but I ensured these were both started
before the install. SQL2005 does seem to be ok on the node1 where the
install was made, but fails when trying to failover to node 2.
Any help would be much appreciated here.
Thanks
Darren
View 1 Replies
View Related
Jan 24, 2008
Ok Here is the story with hopefully all the details.
I had a single node cluster Itanium server running W2k3 IA 64 Ent. SP2 with 2 x sql2000 ent sp4 and 1 sql2005 sp1 instances installed and a clustered file share.
All is well with them.
I attempted to add an additional node to my cluster which started out fine but when I tried to run the sql2000 setup to add this node, there are no warning or errors. Its a silent failure.
I tried many different scenarios but the results are the same. I evicted the node and then tried to run the setup on the evicted node. The setup ran without error. I tried to run setup on my single node cluster and it fails in the same manner. I read and read and from the sqlstp.log this is what I find. Does anyone have a clue what is wrong? i have check all my permissions but I can't put my finger on what it could be.Help Help.
1
<Func Name='InitDataFolder'
<EndFunc Name='InitDataFolder' Return='0' GetLastError='18'>
<Func Name='DetectComputers'>
1
<Func Name='DetectVersionOnMachine'>
NYCTDB04 D:SQL Server ENT 2000 - 64 BitSetupIA64inn 1
<Func Name='InsertVersionRecord'>
NYCTDB04 MSSQLSERVER 0 8.00.760 1033 0 3 1804890536 Enterprise Edition (64-bit) 2099209 1 NYCTDB41 0 1
<EndFunc Name='InsertVersionRecord' Return='0' GetLastError='183'>
<Func Name='InsertVersionRecord'>
NYCTDB04 BIZTALK 1 9.00.2047.00 1033 0 -1 -1 (64-bit) 133124 0 0 1
<EndFunc Name='InsertVersionRecord' Return='0' GetLastError='183'>
<Func Name='InsertVersionRecord'>
NYCTDB04 MYOFFICE 2 8.00.760 1033 0 3 1804890536 Enterprise Edition (64-bit) 2230280 1 NYCTDB42 0 1
<EndFunc Name='InsertVersionRecord' Return='0' GetLastError='183'>
<Func Name='InsertVersionRecord'>
NYCTDB04 SHARED_TEMP 3 8.00.760 1033 0 3 1804890536 Enterprise Edition (64-bit) 2230276 0 0 1
<EndFunc Name='InsertVersionRecord' Return='0' GetLastError='183'>
<EndFunc Name='DetectVersionOnMachine' Return='0' GetLastError='183'>
<Func Name='InsertComputerNameRecord'>
NYCTDB04 0 50010 539101189
<EndFunc Name='InsertComputerNameRecord' Return='0' GetLastError='183'>
<EndFunc Name='DetectComputers' Return='0' GetLastError='0'>
<Func Name='DetectIpResources'>
<Func Name='InsertIpResourceRecord'>
_sql$IpResources 0 144.210.119.64 255.255.255.224 Public
<EndFunc Name='InsertIpResourceRecord' Return='0' GetLastError='183'>
<EndFunc Name='DetectIpResources' Return='0' GetLastError='183'>
<Func Name='DetectGroupResources'>
<Func Name='EnumerateGroupResources'>
SQL 2000 Shared Group(NYCTDB41) NYCTDB04 Disk Q: 0
<Func Name='GetDiskResourceLetters'>
SQL 2000 Shared Group(NYCTDB41) Disk V 0
<Func Name='InsertDiskResourceRecord'>
Disk V 0 V SQL 2000 Shared Group(NYCTDB41)
<EndFunc Name='InsertDiskResourceRecord' Return='0' GetLastError='183'>
<EndFunc Name='GetDiskResourceLetters' Return='0' GetLastError='183'>
<Func Name='GetDiskResourceLetters'>
SQL 2000 Shared Group(NYCTDB41) Disk W 1
<Func Name='InsertDiskResourceRecord'>
Disk W 1 W SQL 2000 Shared Group(NYCTDB41)
<EndFunc Name='InsertDiskResourceRecord' Return='0' GetLastError='183'>
<EndFunc Name='GetDiskResourceLetters' Return='0' GetLastError='183'>
<Func Name='GetVSInfo'>
SQL 2000 Shared Group(NYCTDB41) NYCTDB04 0
<Func Name='EnumVSIPResources'>
NYCTDB41
<Func Name='InsertIpResourceRecord'>
NYCTDB41 0 144.210.119.88 255.255.255.224 Public
<EndFunc Name='InsertIpResourceRecord' Return='0' GetLastError='183'>
<EndFunc Name='EnumVSIPResources' Return='0' GetLastError='183'>
<Func Name='EnumVSResourceOwners'>
NYCTDB41
<Func Name='InsertVSNodeInfoRecord'>
NYCTDB41 NYCTDB04
<EndFunc Name='InsertVSNodeInfoRecord' Return='0' GetLastError='183'>
<EndFunc Name='EnumVSResourceOwners' Return='0' GetLastError='183'>
<Func Name='InsertVSInfoRecord'>
SQL 2000 Shared Group(NYCTDB41) 0 NYCTDB41 MSSQLSERVER 1 D:Program FilesMicrosoft SQL Server V:Program FilesMicrosoft SQL Server ipgnasharedsql.service ipgnasharedsql.service
<EndFunc Name='InsertVSInfoRecord' Return='0' GetLastError='183'>
<EndFunc Name='GetVSInfo' Return='0' GetLastError='183'>
<Func Name='InsertGroupResourceRecord'>
SQL 2000 Shared Group(NYCTDB41) 0 0 NYCTDB04
<EndFunc Name='InsertGroupResourceRecord' Return='0' GetLastError='183'>
<EndFunc Name='EnumerateGroupResources' Return='0' GetLastError='183'>
<Func Name='EnumerateGroupResources'>
Cluster Group NYCTDB04 Disk Q: 1
<Func Name='GetDiskResourceLetters'>
Cluster Group Disk Q: 0
<Func Name='InsertDiskResourceRecord'>
Disk Q: 0 Q Cluster Group
<EndFunc Name='InsertDiskResourceRecord' Return='0' GetLastError='183'>
<EndFunc Name='GetDiskResourceLetters' Return='0' GetLastError='183'>
<Func Name='InsertGroupResourceRecord'>
Cluster Group 1 1 NYCTDB04
<EndFunc Name='InsertGroupResourceRecord' Return='0' GetLastError='183'>
<EndFunc Name='EnumerateGroupResources' Return='0' GetLastError='183'>
<Func Name='EnumerateGroupResources'>
SQL 2005 Biztalk Group(NYCTDB40) NYCTDB04 Disk Q: 2
<Func Name='GetDiskResourceLetters'>
SQL 2005 Biztalk Group(NYCTDB40) Disk T 0
<Func Name='InsertDiskResourceRecord'>
Disk T 0 T SQL 2005 Biztalk Group(NYCTDB40)
<EndFunc Name='InsertDiskResourceRecord' Return='0' GetLastError='183'>
<EndFunc Name='GetDiskResourceLetters' Return='0' GetLastError='183'>
<Func Name='GetDiskResourceLetters'>
SQL 2005 Biztalk Group(NYCTDB40) Disk U 1
<Func Name='InsertDiskResourceRecord'>
Disk U 1 U SQL 2005 Biztalk Group(NYCTDB40)
<EndFunc Name='InsertDiskResourceRecord' Return='0' GetLastError='183'>
<EndFunc Name='GetDiskResourceLetters' Return='0' GetLastError='183'>
<Func Name='GetVSInfo'>
SQL 2005 Biztalk Group(NYCTDB40) NYCTDB04 2
<Func Name='EnumVSIPResources'>
NYCTDB40
<Func Name='InsertIpResourceRecord'>
NYCTDB40 0 144.210.119.90 255.255.255.224 Public
<EndFunc Name='InsertIpResourceRecord' Return='0' GetLastError='183'>
<EndFunc Name='EnumVSIPResources' Return='0' GetLastError='183'>
<Func Name='EnumVSResourceOwners'>
NYCTDB40
<Func Name='InsertVSNodeInfoRecord'>
NYCTDB40 NYCTDB04
<EndFunc Name='InsertVSNodeInfoRecord' Return='0' GetLastError='183'>
<EndFunc Name='EnumVSResourceOwners' Return='0' GetLastError='183'>
<EndFunc Name='GetVSInfo' Return='1168' GetLastError='203'>
<EndFunc Name='EnumerateGroupResources' Return='1168' GetLastError='183'>
<EndFunc Name='DetectGroupResources' Return='1168' GetLastError='183'>
<EndFunc Name='PerformDetections' Return='1168' GetLastError='0'>
View 1 Replies
View Related
Aug 24, 2006
Does anyone know how to install SQL 2005 integration services on a cluster machine?
I have an a-a cluster machine. Both nodes are using SQL 2005 naming instance. During the SQL installation, I did include integration services option as one of my setup items. The setup process was running fine but I can€™t connect to integration services via MS SQL Server management studio. I see below errors:
€œInvalid server name "TESTServerB123". SSIS service does not support multi-instance, use just server name instead of "server nameinstance".
Looks like I must use default instance for 2005 integration services. I re-ran the setup program and added a default instance on the same cluster node. (On that node I have one default instance and one naming instance). Now I can connect to the default SQL Server but when I click on €œstored packages€?, I don€™t see file system and MSDB. It shows nothing at all. Any idea how to make integration services running on a cluster machine?
Thanks
View 5 Replies
View Related
Nov 20, 2007
We are setting up a SQL 2005 cluster at our ISP and would like some feedback from anyone or DBAs for the pros and cons for the following setups.
Option 1.
http://img3.freeimagehosting.net/image.php?d2e8e7e923.gif
Option 2.
http://img3.freeimagehosting.net/image.php?11742dda91.gif
Basically, we need to know which set up is the preferred method.
View 3 Replies
View Related
May 8, 2015
I am using SQL 2012 SE with clustering on Windows server 2008 R2. Now I want migrate it to windows server 2012 with minimal down time. So I want to evict the passive node and add a new node with windows server 2012 and install sql server 2012 SE on the new passive node and perform a failover(make the node with 2012 OS as active) and then evict the new passive node and add another node with windows 2012 and then do the same thing?
View 12 Replies
View Related
Aug 15, 2000
I tried installing SQL Mail but it didnt work.
What happened was, when I was entering the SQLMail profile for an Exchange User name. It took those values. Now when we ran/initialize SQLMail service, the Cluster Services kept rebooting/re-initializing all the services. Therefore, system crash and will not provide any services any longer.
We tried resolving it by running the SQL services in node 2 and we got MSSQLServer v6.5 service running but the SQLExecutive service
will not start.
I tried to reset the permissions on the services and have
that SQLExecutive run on the NT Administrator account.
After reading a few technotes from MS and applying them.
None seem to have worked so far. Here are some of the technotes:
Q195761
Q158585
Q155697
Q155283
(1) How can we fix the SQLExecutive so it will autostart with bringing down the cluster
(2) What can we do to successfully run SQL mail on the cluster server with this all the variables in this situation.
View 1 Replies
View Related
Mar 10, 2004
I appologize if I am posting this msg twice (newby), but I am getting this error msg in the app log.
MS DTC setup failed to populate the shared cluster
registry. The DTC resource will not be able to come
online.Error Specifics:
d:srv03rtmcomcomplusdtcsharedmtxclumtxcluse
tuphelper
.cpp:120, CmdLine: "C:WINDOWScluster
esrcmon.exe" -e
1208 -m 1212 -p 2132, Pid: 3636
Have anybody seen this msg and any ideas on what to do in this situation? Your timely assistance is much appreciated. Thanks,
View 5 Replies
View Related
May 19, 2015
We have an existing SQL Server 2012 Enterprise cluster with 2 nodes (active-active) and uses Windows 2008 R2 OS. We are looking for a way to increase HA as well as offload backups to secondary server and it was suggested that AlwayOn could be an option.
The questions I have are:
1) Is it possible to turn on AalwaysOn feature on an existing cluster?
2) If yes to above, does the secondary replica need to exist as a node on the same cluster or can it be on a completely different cluster?
3) If the secondary replica is on the same cluster (i.e. we add a 3rd node to existing 2 node cluster), can that node be provisioned with storage from a completely different SAN? (i.e. Node 1 and Node 2 accesses LUNs on SAN1 and Node 3 accesses LUNs on SAN2).
View 9 Replies
View Related
Oct 8, 2010
when i install sql server 2005 in cluster. I have error at Setup process screen --> the selected components are being configured.all the components are failed.I am using domain account with administrator account privilege on both server.OS : windows server 2008 on virtual machine..when i install sql server agent is enable to select during setup..
View 12 Replies
View Related
Apr 22, 2015
I saw following point on Technet article about RBS.The local FILESTREAM provider is supported only when it is used on local hard disk drives or an attached Internet Small Computer System Interface (iSCSI) device. You cannot use the local RBS FILESTREAM provider on remote storage devices such as network attached storage (NAS).It looks like that we cannot use FILESTREAM on Failover Cluster because to setup Failover Cluster we need to have NAS. But then the NAS is made available locally for Failover Cluster so FILESTREAM should work right?Found another article which talks about setting up FILESTREAM on Failover Cluster. URL...
View 2 Replies
View Related
Jan 3, 2010
I'm trying to do a SQL 2008 cluster installation.I installed one node and now I'm trying to add a failover cluster node.in the "add Node Rules" I get following message:
Rule Check Result...Rule "SQL Server Database Services feature state" failed.The SQL Server Database Services feature failed when it was initially installed. The feature must be removed before the current scenario can proceed.
View 30 Replies
View Related
May 28, 2000
We have successfully been using MSCS with MSSQL7 (SP1) running under NT4 EE
(SP6a), installed in an active/active configuration using, two DELL
PowerEdge 6350 machines. Recently I installed MSSQL7 (SP2), I followed the
instructions that came with SP2, and unclustered the SQL nodes using the
Failover Cluster Wizard, and installed SP2, this was uneventful, and
appeared to install correctly. Next I tried to recluster the SQL nodes
using the Failover Cluster Wizard as directed. This failed with: "Could not
run setup on remote machine. SQL Cluster Setup failed." So I began the
usual research using the usual resources, and have found articles that
discusses this error, and the things to look for when it happens. I have
exhausted all suggestions without success. I appear to have everything
correctly configured. I have enabled Cluster Logging (level 3), following
are the two things I have found that indicate something is wrong:
1. In the SQL Error Log the following gets logged when I run the wizard:
"Attempting to initialize Distributed Transaction Coordinator."
"Failed to obtain TransactionDispenserInterface:
XACT_E_TMNOTAVAILABLE"
2. In the Cluster Log I see the following message repeatedly:
"[ClRtlCopySecurityDescriptor] MakeSelfRelativeSD failed,
0x00000551"
3. In the sqlclstr.log I see the following, without an indication of
which file is missing:
"[reghelp.h:235] : 2 (0x2): The system cannot find the file
specified."
"[clushelp.cpp:166] : 259 (0x103): No more data is available."
"[validate.cpp:147] DeleteTestGroup:OpenClusterResource: 5007
(0x138f): The cluster resource could not be found."
"~~~ XXX InstallRemote failed"
Does anyone have any ideas about what could be causing this problem?
Many thanks in advance.
Christpher Cutts
LifeMasters Supported SelfCare
View 1 Replies
View Related
Jul 27, 2015
i setup a 2 node sql cluster but 1433 is not listening. I check sql configuration manager and entered 1433 for all ip addresses restarted services but still not 1433
View 14 Replies
View Related
Nov 23, 2015
I ran into problem while trying to install SQL Server 2008 to join to another node in a failover cluster ,you will find here the configuration doc and installation details. URL...
View 4 Replies
View Related
Nov 12, 2015
I am trying to install fail over cluster for SQL and getting the below error message  :
I am using domain admin account to do the installationÂ
View 5 Replies
View Related
Aug 10, 2015
I have been facing following Error in Failover cluster setup as below. I have prepared 2 node and 2 instance sql server failover cluster on top of windows failover.I have deleted MTCBJINS07 in AD and recreated even after, problem is not solved. MTCBJINS07 is my 2nd sql instance sql server network name.
Cluster network name resource 'SQL Network Name (MTCBJINS07)' failed registration of one or more associated DNS name(s) for the following reason:
DNS bad key.Ensure that the network adapters associated with dependent IP address resources are configured with at least one accessible DNS server.
View 2 Replies
View Related
Aug 14, 2015
let me know apart from the following what else is required
2 for private network
2 for public network ......
1 for virtual server/windows cluster ip which is used to connect application
View 1 Replies
View Related
Feb 27, 2013
I installed a SQL server 2008 R2 on a 64 bit Stand alone system today morning
Now I am trying to apply SP1 on it. But it is not progressing further with the below. How to overcome this issue.
Note: Cluster services not installed on this server. Cluster service is not there in the services.msc as well.
View 10 Replies
View Related
Dec 28, 2007
Curious on how this will work.. if i install sql 2005 standard edition on one virtual server.. to a fixed disk (actually 2 fixed disks.. one for C, one for D).. then install another 2005 standard edition on another virtual server.. do i just rerun the setup and suddenly the failover cluster option will NOT be greyed out?
Can anyone comment on this?
Thanks in advance.
View 4 Replies
View Related
Nov 13, 2015
Two node AO cluster setup.
I found errors frequently in cluster events at  logs as below
"Cluster network interface 'Node1 - 10.X.XXX.1' for cluster node 'Node1' on network 'Cluster Network 1' failed. Run the Validate a Configuration wizard to check your network configuration. If the condition persists, check for hardware or software errors related to the network adapter. Also check for failures in any other network components to which the node is connected such as hubs, switches, or bridges."
How to fix this issues? is it missing any patch OS or cluster side?
View 3 Replies
View Related
Jun 24, 2015
I have destroyed the cluster in failover cluster manager and then i am trying to remove node from the sql server installation centre.I am facing the cluster node and cluster service verification errors.I am not able to start the cluster service in services as well.
View 4 Replies
View Related
Nov 28, 2006
Hi all,
I am trying to setup the cluster SQL server, say ServerA and ServerB. While I start the setup in ServerA, it prompts,
'Setup failed to start on the remote machine. Check the Task scheduler event
log on the remote machine.'
But I found that there is no remote logon to both nodes and the service task scheduler is running in both node.
On the other hand, I try to install the SQL via ServerB, it prompts for valid Native client package 'sqlncli.msi' and caused the setup failed finally. However, the Native client was setup successfully as a prerequisite once starting the setup.
Any advise? Thanks in advance!!
View 5 Replies
View Related
Sep 10, 2007
Can anyone tell me how to get around this? Installing SQL- no issues, just when applying the sp
I have tried numerous things, including rebuilding the 2nd node again
Trying to install a service pack on SQL 2000 node, and Install shield keeps returning this error, .
[InstallShield Silent]
Version=v5.00.000
File=Log File
[ResponseResult]
ResultCode=-8
I have reset temp directories on both nodes,
I have made user permissions and profiles exist
I have copied install files to both local and remote locations
I know the response €“ Installshield cannot find the silent response file, but SQL setup creates this on its own.
Short of bringing this production system down and re-installing on both nodes ( I did test this on a non-prod box by the way, no issues), I am at a loss
View 1 Replies
View Related
Jul 28, 2015
I am setting up my first sql node on a 2 node cluster and runing into this
The disks are already added into the failover cluster manager
View 10 Replies
View Related
Jun 10, 2015
I am in the process of moving databases from a SQL 2005 Standard version to a 2-node 2014 cluster.All of my 2005 databases back up successfully.They all restore without issue except for one database that has a full text catalog. I get this message
Msg 7610, Level 16, State 1, Line 2
Access is denied to "fileStoragedataMSSQLSERVERFullTextCatalog", or the path is invalid.
Msg 3156, Level 16, State 50, Line 2
File 'sysft_FTCatalog' cannot be restored to 'fileStoragedataMSSQLSERVERFullTextCatalog'. Use WITH MOVE to identify a valid location for the file.
Msg 3119, Level 16, State 1, Line 2
Problems were identified while planning for the RESTORE statement. Previous messages provide details.
Msg 3013, Level 16, State 1, Line 2
RESTORE DATABASE is terminating abnormally.
[code]....
I went as far as giving the folder full access to everyone temporarily and received the same error.
View 1 Replies
View Related
Apr 10, 2014
I ran the Advanced cluster preparation for a new sql instance on an existing cluster.
Slq Server 2012.
After is completed, it was successful, I realized I specified the wrong Instance Root directory.
Is it possible to remove what the preparation installed? Or is it possible to change the root directory?
View 3 Replies
View Related
Jan 5, 2006
I have XP Pro SP2 with MDAC 2.8.1022. It had a problem so I tried to reinstall MDAC and got a Fatal Setup Error. This setup does not support installing on this operating system. I downloaded MDAC 2.8 1177 and get the same error.
I thought of uninstalling/reinstalling SP2, but this is a 2 month old Dell Latitude 610 with factory installed XP. There is no Windows Service Pack 2 option listed in the Control Panel > Add/Remove Programs.
There's some other strange things, so I wonder if they are related.
1) I have Paul set up as an administrator account. Some folders like MSSQL show that account with no permissions. I grant all the permissions to Paul for that folder. I come back later and the permissions are gone.
2) I deleted 20 files in Explorer, but 7 of them did not go away. I deleted those 7 again and they instatnly reappeared. I deleted those 7 again and then they finally went away.
3) I get a slow reaction time for things like Windows Explorer and opening and closing programs. This is suprising since it has 2 gig of RAM and 2.3 Gig processor. Could it be a memory handling problem that's causing OS problems. Probably, the memory didn't handle the OS installation well and the whole system is compromised now.
View 12 Replies
View Related
Jul 23, 2015
We're doing upgrades from SQL 2008 R2 to SQL 2014. This is blocked due to RS is installed but not configured. Our desired action is to uninstall RS and proceed with the upgrade. But when setuparp.exe is raised, it does not list all the features on the 'Select Features' page. In fact, it only lists the last 2 shared features (SQ Client Connectivity SDK and Microsoft Sync Framework). However, all items appear to be listed on the 'Select Instance' page including RS. I've seen this issue on 2 of our SQL 2008 R2 Servers already.
View 3 Replies
View Related
