Clustering - Effor With Restore After Failover
Feb 20, 2000
I have two SQL 7.0 SP1 (WinNT 4.0 SP 6.2) Servers using Clustering.
Problem: When SQLBox1 goes down, the Failover sends it to SQLBox2. When
SQLBox1 comes back up, the node stays on SQLBox2, instead of going back to
SQLBox1. This happens over 50% of the time, but not every time. Sometimes
it works fine.
I have done 3 hours of research, and can not find anything on this problem,
can any one a tleast point me in the right direction. I can hardly find any
troubleshooting on this issue. I do have January 2000 of the MSDN Library
installed on my machine if that helps, but there was not much on it in there
either (at least not that I found).
View 3 Replies
ADVERTISEMENT
Jul 20, 2005
I have a 2 node Microsoft 2000 cluster with a shared storage device. Iwant to create automatic failover for MS SQL 2000 server. I can dothat wit the following options:1. Active/Pasive (one instance installed)2. Active/Active (More then one instance/virtual sql serversinstalled)I have a question about option 2.Is it possible to have more then one instance/virtual SQL server,service only one database for example loadbalancing. ?, or when youcreate multiple instances/virtual SQL servers, does that mean you havemultiple databases ? If not why does a Virtual SQL server has to betaken over by a cluster node that didnt fail. Then you can actuallyuse option 1. Please advise!The documentation is not very clear on this issues.Regards,Nico de Groot
View 1 Replies
View Related
Sep 24, 2002
Hi all,
We are the studying the possibilty of implementing SQL - Clustering for
Failover server.
Are there any third party tools readily available.
Any suggestion or checklist ??
Any suggestions or comments will be appreciated.
Thanks and have a great day.
View 1 Replies
View Related
Jul 20, 2005
Dear Friends,I wanted to configure Failover cluster for SQL Server 2000 on Windows2000 advanced servers.I have only 2 no.s of windows 2000 advanced server m/cs. I dont haveany shared disks and SCSI drives. Can I still configure the Failoverclustering?I would like to know more about the need for the shared disks in theFailover clustering.Please shed some light.RegardsKumar
View 1 Replies
View Related
May 24, 2007
Does anyone know how to obtain the physical server name that a SQL failover cluster instance is running on through the system tables or other database commands? Thanks in advance.
View 3 Replies
View Related
Sep 29, 2004
:confused:
In evaluating/comparing MS Clustering vs Hardware Failover Blades, has anyone come across any disadvantages/concerns for a Hardware Failover Blades.
Why would you install MS SQL 2000 Clustering when you can use a Hardware Failover Blade and use a SQL 2000 standard edition. e.g In an event a hardware failure occurs the admin manager brings over a standby hardware blade and reassigns it to the SAN (on which OS and SQL 2000) is installed and you are up and running.
Would appreciate any comments and suggestions to compare these solutions.
Thanks
View 1 Replies
View Related
Jun 10, 2015
how to configure email in SQL server failover clustering. I need to configure email to send when node switches from one node to another. best way to configure email in fail over clustering?
View 1 Replies
View Related
Jul 22, 2015
I tested the failover clustering for SQL 2008R2.When I stop the SQL server services manully, the failover did not fail to another resource. At the Faiolover cluster manager, SQl server(MSSQLSERVER)  only show the status for offline. I think it should be move to another owner intead of just show as offline.
View 3 Replies
View Related
Mar 14, 2008
I have 2 Windows 2003 r2 servers with a SQL failover cluster installed across the 2 node. Generally I have been running off node1 with node2 as the failover partner. I have purchased the correct licensing for noe1 and from the following I do not need to purchase a license for node2:
Failover clustering is a process where the operating system and SQL Server 2005 work together to provide availability in the event of an application failure, hardware failure, or operating-system error. Failover clustering provides hardware redundancy through a configuration in which critical resources are transferred automatically from a failing machine to an equally configured server to help ensure continuity of service.
When doing failover support, a server is designated as the passive server. The purpose of the passive server is to absorb the data and information held in another server that fails. A passive server does not need a license if the number of processors in the passive server is equal to or less than the number of processors in the active server. The passive server can take the duties of the active server for 30 days. Afterwards, it must be licensed accordingly
http://www.microsoft.com/sql/howtobuy/activepassive.mspx
My questions are:
1) If I switch my cluster instace to point to node2 for testing node2 in case of a failover, would I need to purchase another licence ? This means I am not doing the repointing because of an 'event of an application failure, hardware failure, or operating-system error' ? Can you please provide information from MS ?
2) How are SQL Licences bound to the windows install in a SQL Server failover cluster configuration ? For instance if node1 legitimately fails due to an 'event of an application failure, hardware failure, or operating-system error' and you failover to node2. Then you think, stuff (forget about) node1 as I have 1 set of licences for SQL Enterprise already and therefore can run with a legitimate licence on node2. Can you please clarify ?
3) I have heard that only one server needs a license in a failover cluster. Then how does this fit in with any of the questions from above:
'The passive server can take the duties of the active server for 30 days. Afterwards, it must be licensed accordingly' ?
In the event of a legitimate failure, node2 would be running off the license purchased. So why are MS restricting the use of it for 30 days ?
View 5 Replies
View Related
Jun 9, 1999
I am looking in to using Microsoft Clustering supported in NT Server Enterprise to provide failover support for 2 database servers running SQL Server 7. I was wondering if anyone had any experience with it--good or bad. I read the white paper and it sounds good, but I'd like to get some real
world application experience.
Thanks for any info.
Bob
View 2 Replies
View Related
Jan 2, 2008
Could I implement a failover cluster solution on the two DBs which are based in two different cities?
Possible?
View 6 Replies
View Related
Mar 24, 2008
Hi All,
We're planning to install a Server 2005 Failover Cluster and I'd like to find more information about licensing, etc.
Basic questions:
- What is the best O.S. to run? Win 2003 or the new 2008? And what version (datacenter, enterprise)?
- Since I'm going to use 2 machines, will I have to pay for 2 licenses (sql and windows - two lic. each)? Or just 1 license, since just 1 machine will be the active server?
This is for some web applications, so, web environment.
Any help?
Thank you!
View 1 Replies
View Related
Jun 14, 2007
Hello.
I am confuse and cant decide on how to setup high availability on our SQL 2005. Here's what on my mind and on resources list:
I plan to have mirroring on my SQL1 to SQL2 with the help of SQL3 as witness. So this would be automatic failover. My idea on mirroring is when SQL1 goes down, SQL3 would tell SQL2 to run and be the primary. It will automatically failover to SQL2. Right? My questions are:
1) How can I revert back to SQL1 once it is ready?
2) I read in one of the post that it is impossible to write in a mirrored DB, is this true? I mean, what's the use of failing over to the next node when it's not possible to write and update data/records?
3) If number 2 is false (i hope so), how would the data be synchronize from SQL2 back to SQL1. Those transaction that were made while SQL1 is down.
4) How about the connection string from the web applications? Would it be automatically point to SQL2? We have load balancing setup in place, would this help web application connection to automatically point to SQL2?
Another setup:
We have SAN in place (not yet used, but is planning to use for this SQL thing), EMC to be specific. My question would be:
1) For SAN setup, the data storage would be centralize. So would that mean that SQL1 and SQL2 services will use the same data and log file from the SAN storage?
2) How would you call this setup then? Can this be clustering type of high availability? Will clustering work under load balancing setup? I believe mirroring is not possible here? Right?
3) How can I setup my 3 SQL servers with the same theory in mind: when SQL1 goes down, SQL2 will take over. Data will be synchronize when SQL1 is up and running again. With automatic failover and reverting back to primary.
I read so much topics about this, but the more I research, the more I get confuse.
Any suggestions, comments, advice is greatly appreciated!
View 6 Replies
View Related
Nov 2, 2006
We want to use sql 2005 failover clustering feature, so that upgrade sql 2000 is necessary. But some of the stored procedures built in 2000 are not working directly in 2005, set the compatibility level to 80 could make them work. In this case, can somebody here tell me if down grade the database level will affect failover clustering running properly? e.g. will data still be synchronized properly? Thanks in advance.
View 3 Replies
View Related
Jul 28, 2015
I am setting up my first sql node on a 2 node cluster and runing into this
The disks are already added into the failover cluster manager
View 10 Replies
View Related
Jul 21, 2014
I have 2 servers in a SQL Server Fail-Over Cluster. IOW I use always-on availability groups. I run backups - full, diff and log - regularly via SQL Agent on one server only depending on which is primary. If there is a fail-over, then backups will continue on the other server. If I have to restore a database in an availability group I probably would need some combination of full, diff, and log backups from each server. Would that actually work? I test the backups weekly however I just realized that I never tested that scenario.
View 1 Replies
View Related
Sep 27, 2004
I got this system error log in the event viewer every time I start the SQL Server cluster resource:
The Microsoft Clustering Service failed restore a registry key for resource SQL Server when it was brought online. This error code was 2. Some changes may be lost.
Even though the SQL seems to be working fine now, I won't know if something drastic will happen later. :confused:
Searching the Internet for resolution, I saw this article. The Microsoft Knowledge Base Article - 307469 (http://support.microsoft.com/default.aspx?kbid=307469) requires using the Windows Server 2003 ClusterRecover utility to reset the server cluster check points.
I've not tried it because I don't know if this is the correct solution or if it will work or not.
Can I even solve the error without using the above utility? I also cannot afford to reinstall the clustering or SQL server. :mad:
Thanks in advance. :)
View 1 Replies
View Related
Oct 29, 2015
1. Once fail over to secondary replica, what will happen to connected session in primary node? can the session fail over to secondary seamlessly or need to re-login. what happen committed transactions which has not write to disk.
2. Assume I have always on cluster with three nodes, if primary fails, how second node make write/ read mode.
3. after fail over done to 2nd secondary node what mode in production(readonly or read write).
4. how to rollback to production primary ,will change data in secondary will get updated in primary.
View 5 Replies
View Related
Mar 3, 2007
We have set up Mirroring with a witness server and everything works fine when we failover from the SQL Management console.
However, if we failover when our Maccola client is connected, the client blows up - clearly because it can no longer connect to the database.
The ODBC DSN used by the Maccola client shows a checkbox for the 'select a failover server' but the checkbox is grayed out.
Also the summary of settings for the DSN at the end of the wizard reveals that the failover to server (y/N) option is set to N.
The default setting for this DSN is 'populate the remaining values by querying the server' but it doesn't appear to be getting the settings for failover from the server or any other interactive DSN settings either. The server is clearly set for mirroring.
Another suspicious item is that the DSN cannot connect to the server with SA permissions, even though the server is set to mixed security and we use the correct authentication.
Is it possible that the client MACHINE is not authenticating with the domain or sql server properly. We are logged into the client with the domain account that is the SQL admin account on the sql server box.
We should be able to interact with the sql server settings through the ODBC DSN on the client shoulnd't we?
Are we missing a service pack on the client?
Thanks,
Kimball
View 1 Replies
View Related
Oct 29, 2015
1. In alwaysON fail over cluster, Once fail over to secondary replica, what will happen to connected session in primary node? can the session fail over to secondary seamlessly or need to re-login. what happen committed transactions which has not write to disk.
2. Assume I have always on cluster with three nodes, if primary fails, how second node make write/ read mode.
3. After fail over done to 2nd secondary node what mode in production(readonly or read write).
4. How to rollback to production primary ,will change data in secondary will get updated in primary.
View 3 Replies
View Related
Nov 13, 2007
We have 2 env. : Testing and Production, both are running Windows 2003 Enterprise Server with SQL Server 2005. The difference is Testing is NOT running Windows cluster but Production do so, what is the best way to transfer a database from testing to production?
We have another systems that both testing and production are running on NON-cluster and we use backup/restore to transfer the database, can it apply in this case.
And I found that there are a tools called DTC, which can transfer all DB objects from one DB to another, is it a best way to transfer between non-cluster and cluster env.?
View 2 Replies
View Related
Oct 29, 2015
While migrating Report services in SQL Server 2005 to 2014, I am trying to restore the Encryption Key in RS Configuration Manager in2014. But I cannot click the 'Restore' button in RS Configuration Manager. So if I should be grant more right to do so or any other action?
View 2 Replies
View Related
Dec 31, 2014
In Windows Server 2012. How do I do a System Restore to a previous restore point?I need to install the 64 bit and 32 bit Oracle Client Install for connections in SSIS and to create Oracle Linked Servers.
If you make a mistake it is not fun removing it. Sometimes it corrupts the machine and it is difficult to uninstall since there is not an Oracle Universal installer for Oracle 11g.If you install the 32 bit before the 64 you mess up the machine.how to create a restore point.
View 6 Replies
View Related
Jun 25, 2015
I am looking for a SQL Backup/Restore tools which can restore multiple environments. Here is high level requirements.
1. We have 4 DBs, range from 1 TB - 1.5 TB Each Database. When we restore to QA, DEV, or Staging, we usually restore 4 of them.
2. I am looking for the speed to complete restoring between 1 - 2 hours for 4 DBs.
I am evaluating the Dephix Software but the setup is very complex and its given us a lot of issues with Windows Authentions, and failure in the middle of the backup. I used Guess Software many years ago but can't find it on the web site any more. Speed is very important for us mean complete restoring as fast as possible. We are on SQL 2012 and SQL 2008 R2.We are currently using NETAPP Technology and I have Redgate Backup Tool but I am mainly looking for fast Restore Process.
View 4 Replies
View Related
Jun 30, 2006
Hello,
Would some one please help me with the syntex on how to run "restore filelistonly" or restore verifyonly" on a SQL backup which has multiple filesets?? My backups locations are as follow:
RESTORE VERIFYONLY
From disk = 'E:syndicated_databank__bkup_01.bak',
'E:syndicated_databank__bkup_02.bak',
€˜E:syndicated_databank__bkup_03.bak€™,
€˜E:syndicated_databank__bkup_04.bak€™, €˜E:syndicated_databank__bkup_05.bak€™
I tried to do a restore with the above, I got error The label 'E' has already been declared. Label names must be unique within a query batch or stored procedure.
Please advise!!
View 3 Replies
View Related
Apr 27, 2007
I have seen this before. A 2000 restore fails, leaving the database thinking it is being restored but the restore job failed and errors when it is restarted. EM is clueless. I believe there is a proc to reset some flag. Can you share it with me???
Thanks!
View 4 Replies
View Related
Dec 4, 2000
What is clustering?Why is it done?
Any suggestion appreciated.
Cheers!
View 4 Replies
View Related
Sep 14, 1999
I need to cluster two NT Enterrpise Servers with SQL 7 running on them. I have been looking all over the Net for info but not much luck. I need to have some specifics. Can you help me with some good sites or books or both? I have tried Microsoft and they had some info but not much.
Please help!
thanks
View 3 Replies
View Related
Nov 20, 2001
We are in the process of consolidating all our SQL6.5 and SQL7 databases to a single SQL 7 server - once completed we want to setup a 2 node SQL7/2000 cluster on either NT4 Enterprise or W2k Advanced Server. I would therefore appreciate any advice in choosing between the two platforms based on cost, ease of setup & configuration and ongoing reliabilty & uptime etc - we currently have no NT4 Enterprise Servers so would have to purchase these licenses anyway. Correct me if I am wrong but I also understand that setting up a cluster on NT4 Enterprise is considerabely more complicated and time consuming than on W2K Advanced Server? Any advice would be greatly appreciated..
regards
Marcfw
View 1 Replies
View Related
Oct 13, 2005
I have a job interview and I need to know what type of questions can be asked about working in a cluster environment, I don't have much experience in clustering, can someone please give me an idea?
Thanks in advance!!
View 5 Replies
View Related
Mar 19, 2001
Can I implement failover clustering between SQL Server 2000 & SQL Server 7.0? Or do they both need to be the same version of SQL Server.
View 3 Replies
View Related
Feb 14, 2005
I have a question relating more to documentation and support. I'm trying to find documentation on clustering.
I remember quite some time ago I found a white paper that literally walked you through every step involved in setting up a SQL Server failover cluster. I had also found a white paper that walked you through setting up an Active/Active cluster.
I've been going through Microsoft's site, but all I've found are little bits and pieces.
If anyone can point me in the right direction, or even provide a link, etc. as to where to find some good solid documentation, that would be awesome.
Thanks!!
Anthony
View 2 Replies
View Related
Sep 21, 2005
If i have an activepassive cluster for SQL Server, under what circumstances would it prompt to automatic changeover to the passive cluster ? Failure of the SQL Server, or let's say 1 user database out of 25 becomes suspect?
View 1 Replies
View Related
