MS SQL Server :: Code Page Error

Code Page Conversion Error

Feb 15, 2002

Hi
We have the problem with Text data type. We can insert into Text column from few work stations but not from few. This is the following error we are getting
COde page translations are not supported for the text data type. From:1252 To: 850.

If anybody has solutions advance thanks to them.

Thanks,
Rau

View 1 Replies View Related

It Gives Code Page Error On Creating Stored Procedure !!!!!

Jun 28, 2006

Hi
I was transferring objects of my existing database from remote to local and I recieved this error during the DTS process. It was on the transfer of the following stored procedure. I tried to create this SP manually but its giving me the same error and doesn't create it. I don't know how to fix it.
I wonder if somebody can help me! Thanks in Advance
[450] Code page translations are not supported for the text data type. From: 1252 To: 1256.
CREATE PROCEDURE dbo.Novasoft_DL_UpdateDownloadsRating @RatingID int, @DownloadID int, @UserID int, @Rating int, @Comment text, @ReviewDate datetime, @CommentName nvarchar(50) ASUPDATE dbo.Novasoft_DL_DownloadsRating SET [DownloadID] = @DownloadID, [UserID] = @UserID, [Rating] = @Rating, [Comment] = @Comment, [ReviewDate] = @ReviewDate, [CommentName] = @CommentNameWHERE [RatingID] = @RatingID
GO

View 1 Replies View Related

SSIS Error Code DTS_E_OLEDBERROR. An OLE DB Error Has Occurred. Error Code: 0x8000FFFF.

Jan 28, 2008

Hi All,

Recently in an SSIS package I am getting the following error for a particular Data flow task.

Error: 2008-01-25 12:01:48.58

Code: 0xC0202009

Source: Import Datasynapse Data User Events Source [3017]

Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x8000FFFF.

End Error

Error: 2008-01-25 12:01:48.73

Code: 0xC004701A

Source: Import Datasynapse Data DTS.Pipeline

Description: component "User Events Source" (3017) failed the pre-execute phase and returned error code 0xC0202009.

End Error

Our guess is when the data size of User Events table is more it throws this error. If we try to transfer small subset of data it succeeds. What could be reason for this error?

Since this is very urgent, immediate response would be very much appreciated.

Thanks & Regards,
Prakash Srinivasan

View 4 Replies View Related

Code Page

Dec 6, 2006

Hello,

I am getting following error

Error: 0xC02020F4 at Data Flow Task, OLE DB Source [1]: The column "dbname" cannot be processed because more than one code page (936 and 1252) are specified for it.

Error: 0xC02020F4 at Data Flow Task, OLE DB Source [1]: The column "dbsize" cannot be processed because more than one code page (936 and 1252) are specified for it.

Error: 0xC02020F4 at Data Flow Task, OLE DB Source [1]: The column "Owner" cannot be processed because more than one code page (936 and 1252) are specified for it.

Error: 0xC02020F4 at Data Flow Task, OLE DB Source [1]: The column "Status" cannot be processed because more than one code page (936 and 1252) are specified for it.

Error: 0xC02020F4 at Data Flow Task, OLE DB Source [1]: The column "CompLevel" cannot be processed because more than one code page (936 and 1252) are specified for it.

When I run the package itself it is working fine and when I am calling the package from another package getting this error. From Parent package I sending servername for olde db source to this package.

Thanks.

View 24 Replies View Related

SqlDataSource - Where To Put It ? On The Page - In The Code Behind ?

Nov 19, 2006

Hi,
I have the following Sql Data Source that I wish to bring back on my page:
<asp:SqlDataSource ID="SqlDataSource1" runat="server" ConnectionString="<%$ ConnectionStrings:FrogConnectionString %>"
SelectCommand="ProposalsCheckNewCustomerData" SelectCommandType="StoredProcedure">
<SelectParameters>
<asp:FormParameter FormField="MaritalStatusID" Name="MartialStatusID" Type="Int32" />
<asp:FormParameter FormField="LivingStatusID" Name="LivingStatusID" Type="Int32" />
<asp:FormParameter FormField="DealerID" Name="DealerID" Type="Int32" />
<asp:FormParameter FormField="VehicleTypeID" Name="VehicleTypeID" Type="Int32" />
<asp:FormParameter FormField="FinanceTypeID" Name="FinanceTypeID" Type="Int32" />
<asp:FormParameter FormField="MediaSourceID" Name="MediaSourceID" Type="Int32" />
<asp:FormParameter FormField="DealerContactID" Name="DealerContactID" Type="Int32" />
</SelectParameters>
</asp:SqlDataSource>
The recordset brings back 7 values that I wish to populate into 7 Labels.
1. Should the SqlDataSource be on the page (between the Head tags) or within the Page_Load command of the Page Behind ?- If its on the page behind do any of you have any sample code to show me how to get the recordset up and running ?
2. How would I bind the results to a label ?- Within my old asp pages it was simple (I'm not saying its not simple here, I am still getting my head around vb.net)- eg <%=rsX("MaritalStatus")%> I guess its something very similar
Thanks for any pointersFizzystutter

View 4 Replies View Related

Code Page Conversion...

May 6, 2008

I'm grabbing data from a DB2 database on an AS/400.

Everything seemed fine and dandy until I started on one particular very big table. It turns out that some of the text fields in this table have characters specific to French. i.e. the funny 'oe' character and something that looks like at shrunken '<' sign.

The error being generated is:

Code Snippet
Text was truncated or one or more characters had no match in the target code page

The Code page on the DB2 box is 285, the default code page on the target SQL Server box is 1252. I've tried forcing the use of the default code page (1252), but the same happens.

Anyone know what I'm doing wrong? Is there another Code page value I should try using?

View 3 Replies View Related

AS/400 With Arabic Code Page (420)

Aug 12, 2007

Hi yeah.

I am doing a project which retrieves data from a AS/400 machine.
The code page of the machine is 420.
I used "OLE DBIBM DB2 UDB for iSeries IBMDASQL OLE DB Provider" to connect from SQL Server.
The problem is, all the arabic characters coming from this machine becomes unreadable, becoming some machine code text.
What could be the problem and how can I solve this?

Thank you.

View 2 Replies View Related

TRUNCATION OR CODE PAGE

Jun 14, 2006

I have a very nasty error on ssis,

Text was truncated or one or more characters had no match in the target code page

This can not be truncation because the field is empty, the second thing is that when i read the file it reads 62000 odd rows but there are 64000 rows.

if i just read the entire file and write the entire file in a scipt i loose 13 rows

I have tried different code pages and non have worked.

Does anyone have an idea

View 3 Replies View Related

Getting Code Page Errors....

Feb 9, 2006

I am importing some data from my IBM DB2 Z/OS mainframe to SQL Server 2005 using the SSIS import wizard. The wizard automatically converted the DB2 string data before trying to store it to SQL Server. The code page that the wizard chose to do its conversion is the 1252 Ansi Latin. However, I am getting the following error on the address field...."one or more characters had no match in the target code page". Can someone suggest another code page? ASCII? IBM 37?

View 3 Replies View Related

How To Find Out The Character Set/code Page

Jul 21, 2000

Hi!
How one can find out the character set/code page set during SQLServer installation?
Thanks,
Fabio

View 1 Replies View Related

HEEEEELP....How Can I Change The Page Code?

Apr 8, 1999

I migrate from sql server 6.5 to sql server 7.0, and i'm having problems
with the information that returns me, when i was using 6.5 version
everythings was fine, but now that i'm using 7.0 version sql returns me
unknow characters instead of latin characters, somebody tells me that
i've installed different character set and code page in sql server 7
than Sql Server 6.5 , if this is right what can i do to repair this
mistake that i've made, ther is a way to change the code page and
character set in sql 7.0. Or maybe i have to look an sql driver
compatible, or this is a crazy idea?.

View 1 Replies View Related

Code Page Errors In SSIS

Nov 21, 2007

Hi All,
we have a set of packages which has to to be implemented across differnet environments.
the packages invariable uses OLEDB Source/Destination Components.
In these two components the Code Page Property is not Configurable.
so if the package has to be Deployed in a different environment than,where it is Developed it gives a Validation Error.
Is there a Workaround for this problem.
if anybody have faced the problem earlier,please post it.
thanks in advance.
cheers
srikanth

View 1 Replies View Related

Cannot Retrieve Code Page Info...

Nov 20, 2006

Hello again!

I got a problem using an OLE-DB Source in my data flow task. It is an Informix-Server using the newest OLE DB-Driver provided by IBM. However, when I set up the OLE DB-Source with connection manager and SQl-Query, I get the following warning message:

Warning at {2B334CA3-A792-4BC2-93AA-12FADCF1E696} [OLE DB Source [45]]: Cannot retrieve the column code page info from the OLE DB provider. If the component supports the "DefaultCodePage" property, the code page from that property will be used. Change the value of the property if the current string code page values are incorrect. If the component does not support the property, the code page from the component's locale ID will be used.

Later when I try to execute the package, the destination adapter gets errors like

Error 3 Validation error. Data Flow Task: OLE DB Destination [2985]: Columns "antrag" and "Antrag" cannot convert between unicode and non-unicode string data types. Informix_OLEDB.dtsx 0 0

I guess that SQL Server cannot get the data types from the Source.

Has anyone an idea? Thanks in advance!

View 11 Replies View Related

Setting Default Code Page

Nov 28, 2007

I've been reading some forums and I'm not able to get this to work. Basically I'm using an Oracle DB source and trying to import data into SQL server 2005. I guess the best connections to use are OLE DB.

Here are my current connections:
Source: Native OLE DBOracle Provide for OLE DB
Destination: Native OLE DBSQL Native Client

I'm running SP2 of SQL 2005.

Now, the issue is I'm not getting the code page stuff correct. In the data flow I'm just doing a OLE DB Source to SQl Server Destination. I'm not doing any transformations (I'm hoping to avoid doing that).

I'm getting an error:

[OLE DB Source [1]] Warning: Cannot retrieve the column code page info from the OLE DB provider. If the component supports the "DefaultCodePage" property, the code page from that property will be used. Change the value of the property if the current string code page values are incorrect. If the component does not support the property, the code page from the component's locale ID will be used.

I'm looking at how to set the DefaultCodePage property in various forums, but nowhere does it say exactly how to do this. I've tried changing the "Extended Properties" and added AlwaysUseDefaultCodePage=TRUE in there, but that doesn't work. I've tried changing the Locale Identifier to 1252 that doesn't work. I've tried a combination of the two, doesn't work. Can somebody tell me two things:

1. what's the best/fastest/industry used method to get data from Oracle into SQL server via SSIS (please include the type of connections).
2. How the hell do you set the DefaultCodePage property. I would love a screenshot on this one as well.

Thanks,
Phil

View 3 Replies View Related

Code Page Conversion Shortcut?

Dec 16, 2005

Is there a simple way to avoid having to use a data conversion task to convert Unicode data (from DB2) to ANSI format (for insert to Oracle)?

I'm hoping that there is a way to set the code page property on the OLEDB driver so that it implicitly converts to the format I want instead of having to explicitly force the conversion in the package.

Thoughts? suggestions?

-Clayton

View 3 Replies View Related

Code Page Issues With Connecting To DB2

May 1, 2008

I'm using the IBM DB2 UDB for iSeries IBMDA400 OLE DB Provider to connect to an AS/400 db2 database

I'm trying to do a simple pull through of table data.

My connection string is :

Code Snippet
Provider=IBMDA400.DataSource.1;Data Source=WAS400;Persist Security Info=True;Password=**********;User ID=svcorbit;Initial Catalog=S652F01E;Force Translate=0;Catalog Library List=OSLD1F3, PAOS21, OSLPLF3

I'm getting a code page conflict when I try to import the data into SQL Server. This happens when I edit the OLE DB Source component:

Code Snippet
The component reported the following warnings:
Warning at {47FF55CB-AA24-45A4-B0DC-2807EC6D3EC1} [OLE DB Source [3570]]: Cannot retrieve the column code page info from the OLE DB provider. If the component supports the "DefaultCodePage" property, the code page from that property will be used. Change the value of the property if the current string code page values are incorrect. If the component does not support the property, the code page from the component's locale ID will be used.

and at package validation level when trying to run:

Code SnippetError at Data Flow Task [OLE DB Destination [970]]: Column "ACRC10" cannot convert between unicode and non-unicode string data types.

I've tried using the default code page on the component, that doesn't work. I've tried changing the code page to 285 (which is what it is on the AS/400), that doesn't work.

I'm running out of ideas... help!

View 4 Replies View Related

How Do I Pass A Parameter To A Sqldatasource In A Code Behind Page

Feb 1, 2007

i have a sqldatasource on my asp.net page -- select * from table where id = @id
i want to set the @id in the backend and set the result to textbox1.text
how do i do this?

View 1 Replies View Related

How To Code ASP.NET Page With Return Value Store Procedure?

Apr 12, 2005

Does anyone know how to call a SQL store procedure that return a value to the page?
I've a simple data entry aspx page with several textboxes and a save button. When user fill out the form and click save/submit, it calls a store procedure to insert a row into a SQL table and automatically generate an ID that need to return the the page to display for the user.
Are there a similar article somewhere?

Thank you all!

View 6 Replies View Related

Changing Sort / Code Page When Upgrading

Jul 26, 2000

Any experience with upgrading from 6.5 to 7.0 and changing sort order / code page in the process? Does this cause problems or matter? We're trying to go with a standard and the servers I need to upgrade aren't at that code page standard.

Thanks..

View 2 Replies View Related

6.5 To 2000 Upgrade Code Page Issue

Jul 4, 2002

Hi

I am upgrading a SQL 6.5 database with code page 850 to SQL 2000 with code page 1252.

The problem we have is any german "u" ( with the umlatt - two dots ) above it wont transfer.

I am using the SQL upgrade tool that comes with sql 2000 and have tried many different code pages in 2000 but no joy.

Can anyone help?

Thanks

J.

View 3 Replies View Related

Host Variables And Code Page Conversion

Jul 20, 2005

Hello,Does anybody know what is the documented and known behavior ofinserting/updating binary columns using host variables from a client to aserver which have different code pages? Will any code page / character setconversion take place? I am particulary interested in insert/update fromsubqueries.eg:insert into t1(binarycol) select :HV1 from t2versusinsert into t1(binarycol) select :HV1||charcol from t2update t1 set bytecol=:HV1versusupdate t1 set bytecol=:HV1||'abc'insert into t1 (bytecol) values(:HV1)versusinsert into t1 (bytecol) values(:HV1||'abc')Is the conversion dependent on the context?ThanksAakash

View 1 Replies View Related

Code Page Problem With IBM ISeries Source

Nov 19, 2007

Hello,
I'm not up to speed on the IBM database and provider technologies, and I have an issue that I'm not clear on. I am using the .Net ODBC Data Provider in a connection mananger. The DSN uses the iSeries Access ODBC Driver. I have iSeries Access for Windows version 5 release 4 installed on laptop where I have built the package.

I have a sql command configured in a DataReader source that uses the connection manager. Between the source and sql server table destination, I have a Derived Column transform that converts the columns from Unicode to non unicode data.

When I run the package, I get an error that states that the package failed because a particular column, 'ADDR1' is set to fail if truncation occurs. I set up error output to a text file so that I could look at the failing row(s). The text file had to be set up using UTF-8 before it would accept data. The ADDR1 column at the destination will accept 30 characters. The data in the ADDR1 column of the failing row is 19 characters long, but I think there is a carriage return character present. I have tried TRIM in the exression for the column, but no luck. I have tried code pages 65001, and 37 in the Derived Column transform, but that has not worked. I remembered to set up DefaultCodePage and AlwaysUseDefaultCodePage for the OLE DB destination for each code page change.

Am I not using the correct code page, or do I need to do something else to clean up the data?

Thank you for your help!

cdun2

View 9 Replies View Related

Configuring The Code Page Of A OLEDB Source.

Jun 25, 2007

hi,

i have a number of interfaces in which i have used oledb source.

the problem i am facing is oledb source components code page is not configurable now if i want to deploy the interface in a different environment which has a database with a different collation it gives a error that oledb source needs new metadata.

has anybody faced this problem earlier.please give me a solution to this problem ..

thanks in advance.

srikanth

View 1 Replies View Related

Capture Return Value From Stored Procedure, Use Same In Code Behind Page

Apr 18, 2007

My stored procedure works and codes is working except I need to capture the return value from the stored procedure and use that value in my code behind page to indicate that a duplicate record entry was attempted. In my code behind file (VB) how would I capture the value "@myERROR" then display in the label I have that a duplicate entry was attempted.
Stored ProcedureCREATE PROCEDURE dbo.usp_InsertNew @IDNumber        nvarchar(25), @ID  nvarchar(50), @LName  varchar(50), @FName  varchar(50)
AS
DECLARE @myERROR int    -- local @@ERROR      , @myRowCount int --local @@rowcountBEGIN  -- See if a contact with the same name and zip code exists IF EXISTS (Select * FROM Info   WHERE ID = @ID)   BEGIN    RETURN 1END ELSEBEGIN TRAN    INSERT INTO Info(IDNumber, ID, LName,             FName) VALUES (@IDNumber, @ID, @LName,             @FName)             SELECT @myERROR = @@ERROR, @myRowCount = @@ROWCOUNT If @myERROR !=0 GOTO HANDLE_ERROR
                               COMMIT TRAN RETURN 0 HANDLE_ERROR: ROLLBACK TRAN RETURN @myERROR      ENDGO
asp.net page<asp:SqlDataSource ID="ContactDetailDS" runat="server" ConnectionString="<%$ ConnectionStrings:EssPerLisCS %>"            SelectCommand="SELECT * FROM TABLE_One"                        UpdateCommand="UPDATE TABLE_One WHERE ID = @ID"                         InsertCommand="usp_InsertNew" InsertCommandType="StoredProcedure">                        <SelectParameters>                <asp:ControlParameter ControlID="GridView1" Name="ID" PropertyName="SelectedValue" />            </SelectParameters>            </asp:SqlDataSource>

View 2 Replies View Related

How To Code An Aspx Page To Run A Stored Procedure With A Parameter

Sep 19, 2007

My stored proceddure "My Programs" includes a parameter @meid.How do I code an aspx file to run the procedure with a user ID, e.g. EmpID?I tried the following codes, but the error message indicated it can not findthe Stored Procedure. How do I pass the EmpID as a Stored Procedure parameter?
<%meid = EmpIdcmd.CommandText = "MyPrograms meid"cmd.CommandType = CommandType.StoredProcedurecmd.Connection = sqlConnection2sqlConnection2.Open()reader3 = cmd.ExecuteReader(meid)While reader3.Read()sb.Append(reader3(i).ToString() + "......<BR> <BR /> ")End While%>
TIA,Jeffrey

View 3 Replies View Related

How Do I Return The Identity From Stored Procedure To Asp.net Code Behind Page?

Jun 2, 2006

how do i return the identity from stored procedure to asp.net code behind page?
CREATE PROCEDURE [dbo].[myInsert] ( @Name varchar(35), @LastIdentityNumber int output)AS insert into table1 (name) values (@name)
DECLARE @IdentityNumber intSET @IdentityNumber = SCOPE_IDENTITY()SELECT @IdentityNumber as LastIdentityNumber
code behind:
public void _Insert(
string _Name,
{
DbCommand dbCommand = db.GetStoredProcCommand("name_Insert");db.AddInParameter(dbCommand, "name", DbType.String, _userId);
db.AddParameter(dbCommand, "@IdentityNumber", DbType.Int32, ParameterDirection.Output, "", DataRowVersion.Current, null);
db.ExecuteNonQuery(dbCommand);
int a = (int)db.GetParameterValue(dbCommand,"@IdentityNumber");
whats wrong with to the above code?

View 2 Replies View Related

Data Conversion Components && Code Page Issue

Feb 17, 2006

I am using the SSIS wizard to pull data from DB2 z/os to sql server. The data flow task that is created converts the data to DT_STR Ansi 1252 before storing to sql server database. The package is blowing up on in the data conversion component...no match in found in target code page...for my city name field.

My old dts wizard didn't have this problem. The forums seem to indicate that SSIS is no longer doing some of the implicit conversions that DTS did and I may have to do more than one conversion.

What format type/code page do I use for the other conversion? The code page for my DB2 data source is 37.

I've tried several scenarios and none of them have worked. Any hints?

View 4 Replies View Related

Retrieving A File Link From The Database And Including Its Code On Page

Dec 21, 2004

Hi there folks,

was just wondering if there was an easy way to include a files contents into a web page via a database field. A bit confusing i know.

Here goes:

I got a field called ContentPage stored in a database. (e.g Index.htm)

I want to retrieve this page and then include its contents in my middle div of the webpage like so: . Not allowing me to do this as you may have guessed. These pages will either be htm or aspx pages. This would make my life so much easier.

Is there any way of doing this or am i kidding myself.

Would appreciate any help.

Paul

View 1 Replies View Related

How I Can Rebuild Master Db To Change The Code Page Of The Current SQL7

Jan 10, 2001

How I can rebuild master db to change the Code Page of the current SQL7 , to convert my SQL7 from code page 850 to 1252 ? I have huge data in the old code page dbs , Does rebuild the master db mean reinsert the data again ?

View 1 Replies View Related

Text Was Truncated Or One Or More Characters Had No Match In The Target Code Page

May 13, 2008

Hi,

I am tryin to run an SSIS package from an Excel Spreadsheet to MS SQL Server 2005.

I receive the error: Text was truncated or one or more characters had no match in the target code page (full report is below).

I found this thread: http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=2562259&SiteID=1
and have set the destination column to nvarchar(max), and I have also set the TruncationRowDisposition = RD_IgnoreFailure on the destination column, with no luck.

Any ideas? Thanks!

Operation stopped...

- Initializing Data Flow Task (Success)

- Initializing Connections (Success)

- Setting SQL Command (Success)

- Setting Source Connection (Success)

- Setting Destination Connection (Success)

- Validating (Success)

- Prepare for Execute (Success)

- Pre-execute (Success)

- Executing (Success)

- Copying to [cisense_new].[dbo].[_Details] (Error)
Messages
Error 0xc020901c: Data Flow Task: There was an error with output column "Name" (66) on output "Excel Source Output" (60). The column status returned was: "Text was truncated or one or more characters had no match in the target code page.".
(SQL Server Import and Export Wizard)

Error 0xc020902a: Data Flow Task: The "output column "Name" (66)" failed because truncation occurred, and the truncation row disposition on "output column "Name" (66)" specifies failure on truncation. A truncation error occurred on the specified object of the specified component.
(SQL Server Import and Export Wizard)

Error 0xc0047038: Data Flow Task: SSIS Error Code DTS_E_PRIMEOUTPUTFAILED. The PrimeOutput method on component "Source 1 - owners$" (52) returned error code 0xC020902A. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing. There may be error messages posted before this with more information about the failure.
(SQL Server Import and Export Wizard)

Error 0xc0047021: Data Flow Task: SSIS Error Code DTS_E_THREADFAILED. Thread "SourceThread1" has exited with error code 0xC0047038. There may be error messages posted before this with more information on why the thread has exited.
(SQL Server Import and Export Wizard)

Error 0xc0047039: Data Flow Task: SSIS Error Code DTS_E_THREADCANCELLED. Thread "WorkThread0" received a shutdown signal and is terminating. The user requested a shutdown, or an error in another thread is causing the pipeline to shutdown. There may be error messages posted before this with more information on why the thread was cancelled.
(SQL Server Import and Export Wizard)

Error 0xc0047039: Data Flow Task: SSIS Error Code DTS_E_THREADCANCELLED. Thread "WorkThread2" received a shutdown signal and is terminating. The user requested a shutdown, or an error in another thread is causing the pipeline to shutdown. There may be error messages posted before this with more information on why the thread was cancelled.
(SQL Server Import and Export Wizard)

Error 0xc0047039: Data Flow Task: SSIS Error Code DTS_E_THREADCANCELLED. Thread "WorkThread1" received a shutdown signal and is terminating. The user requested a shutdown, or an error in another thread is causing the pipeline to shutdown. There may be error messages posted before this with more information on why the thread was cancelled.
(SQL Server Import and Export Wizard)

Error 0xc0047021: Data Flow Task: SSIS Error Code DTS_E_THREADFAILED. Thread "WorkThread2" has exited with error code 0xC0047039. There may be error messages posted before this with more information on why the thread has exited.
(SQL Server Import and Export Wizard)

Error 0xc0047021: Data Flow Task: SSIS Error Code DTS_E_THREADFAILED. Thread "WorkThread0" has exited with error code 0xC0047039. There may be error messages posted before this with more information on why the thread has exited.
(SQL Server Import and Export Wizard)

Error 0xc0047021: Data Flow Task: SSIS Error Code DTS_E_THREADFAILED. Thread "WorkThread1" has exited with error code 0xC0047039. There may be error messages posted before this with more information on why the thread has exited.
(SQL Server Import and Export Wizard)

Error 0xc02020c4: Data Flow Task: The attempt to add a row to the Data Flow task buffer failed with error code 0xC0047020.
(SQL Server Import and Export Wizard)

Error 0xc0047038: Data Flow Task: SSIS Error Code DTS_E_PRIMEOUTPUTFAILED. The PrimeOutput method on component "Source 2 - trademarks$" (128) returned error code 0xC02020C4. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing. There may be error messages posted before this with more information about the failure.
(SQL Server Import and Export Wizard)

Error 0xc0047021: Data Flow Task: SSIS Error Code DTS_E_THREADFAILED. Thread "SourceThread2" has exited with error code 0xC0047038. There may be error messages posted before this with more information on why the thread has exited.
(SQL Server Import and Export Wizard)

Error 0xc02020c4: Data Flow Task: The attempt to add a row to the Data Flow task buffer failed with error code 0xC0047020.
(SQL Server Import and Export Wizard)

Error 0xc0047038: Data Flow Task: SSIS Error Code DTS_E_PRIMEOUTPUTFAILED. The PrimeOutput method on component "Source - details$" (1) returned error code 0xC02020C4. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing. There may be error messages posted before this with more information about the failure.
(SQL Server Import and Export Wizard)

Error 0xc0047021: Data Flow Task: SSIS Error Code DTS_E_THREADFAILED. Thread "SourceThread0" has exited with error code 0xC0047038. There may be error messages posted before this with more information on why the thread has exited.
(SQL Server Import and Export Wizard)

- Copying to [cisense_new].[dbo].[_Owners] (Stopped)

- Copying to [cisense_new].[dbo].[_Trademarks] (Stopped)

- Post-execute (Success)
Messages
Information 0x402090df: Data Flow Task: The final commit for the data insertion has started.
(SQL Server Import and Export Wizard)

Information 0x402090e0: Data Flow Task: The final commit for the data insertion has ended.
(SQL Server Import and Export Wizard)

Information 0x402090df: Data Flow Task: The final commit for the data insertion has started.
(SQL Server Import and Export Wizard)

Information 0x402090e0: Data Flow Task: The final commit for the data insertion has ended.
(SQL Server Import and Export Wizard)

Information 0x402090df: Data Flow Task: The final commit for the data insertion has started.
(SQL Server Import and Export Wizard)

Information 0x402090e0: Data Flow Task: The final commit for the data insertion has ended.
(SQL Server Import and Export Wizard)

- Cleanup (Success)
Messages
Information 0x4004300b: Data Flow Task: "component "Destination - _Details" (26)" wrote 14454 rows.
(SQL Server Import and Export Wizard)

Information 0x4004300b: Data Flow Task: "component "Destination 1 - _Owners" (92)" wrote 13304 rows.
(SQL Server Import and Export Wizard)

Information 0x4004300b: Data Flow Task: "component "Destination 2 - _Trademarks" (186)" wrote 10005 rows.
(SQL Server Import and Export Wizard)

View 35 Replies View Related

Text Was Truncated Or One Or More Characters Had No Match In The Target Code Page..

Oct 17, 2007

Hi,

I have tried to extract data from Pervasive SQL into MS SQL Server using DTS. Due to the server has been set as Chinese language region, the MS SQL is also set as 'Chines_PRC_CI_AS' by default. After the successful extraction and transfer, I have exported the data out to Excel format. Due to different location, I have copy and transfer the data into another reporting server which is having MS SQL 2005.

When trying to import the data into the server, it prompted an error '[Data Conversion 1 [168]] Error: Data conversion failed while converting column "DESC" (166) to column "Copy of DESC" (187). The conversion returned status value 4 and status text "Text was truncated or one or more characters had no match in the target code page.". '. After checking and finding, I found it was due to the chinese characters that are contained inside the data files.

I have tried to change the collation setting inside MS SQL 2005 with the same setting as the MS SQL 2000, but it still not working. Please help and advice.

Thank you and cheers.

Best regards,
Francis

View 9 Replies View Related

Code Page Translations Are Not Supported For The Text Data Type. From: 1252 To: 950.

Jul 23, 2005

Code page translations are not supported for the text data type. From:1252 To: 950.I would like to know what this message means. I also installed thelanguage packs in advanced settings, Everything is set to English. Mywindows XP computer is XP English. For some reason I cant get an updateto go thru using ADO. like Recordset.UpdateAlthough other routines using .update workAny ideas?

View 6 Replies View Related