Hi,
We have a few Analysis Server databases. I need to go to each server/database and in a Word document write the information for each server/database. For example I have a database called Analysis Services Project 1 with Data Source dsIIBSW. I need to write it in a document. Is there a fast way of doing that?
Thanks
Whisky-my beloved dog who died suddenly on the 29/06/06-I miss u so much.
I am trying to develop a sql script that will select information from statistical tables on several servers and build a report based on the information collected from each. What SQL statements are used to connect to another database or does anyone have an example of a script that collectes information from several servers?
View 1 Replies View RelatedThere is a table with the id and categories Parentid. The challenge is this: you need to collect in each category one drain all the ID that concern it. For Example:
declare @t table (
[id] [bigint],
[Parentid] [bigint],
[Name] [nvarchar](50)
)
insert into @t
[code]....
If you have 2 tables with the same columns and you would like to see all distinct records in a result of a select and also the information in the records which table the record comes from (for instance: from table A or from table B or bot tables contain it) what should you do?
View 5 Replies View RelatedI have a requirements to collect Transactions per second from a sql server instances level. Any script to collect TPS in the instance level ?
View 5 Replies View RelatedI have just started in a brand new role where I need to collect a large amount of diverse data. Part of this data is whether the steps in a guideline has been followed ( a simple check box or yes/no) (but there are maybe 100 guidelines)
My IT department have suggested we use SQL to create the database, but this will obviously take time. In the meantime my boss is keen that I get on with the data collection before the database is ready. I do not want to repeat steps when I create the SQL database so is there any format you would recommend I collect my data in now that can be easily applied to the SQL database - ie if I used Excel, would that be best, and should I then try to keep potential SQL table data separate?
from this, circdate being a datetime field:SQLQuery = "select distinct circdate from circdata order by circdate"I need the distinct date portion excluding the time part.this has come about when I discoveredI am inserting and updating some datetime values with the same value,but for some reason, the values are always off by a few seconds. I seta variable called SetNow assigned to NOW and then set the datetimefields to this SetNow variable. Then when I collect the distinct datetime I am assuming they will have the same values recorded incircdate, but no, they are off by several seconds. Makes no sense to meat all. I tried renaming the variable several times but it makes nodifference at all.any help appreciated, thanks.
View 5 Replies View RelatedHi all. Anyone know if sql server collects stats on how many fulltable scans a table gets and if so how do I get at those stats? Tryingto track down poorly indexed tables / processes and I am guessing thatsql server does have this data secreted away somewhere much like mydb2 and informix databases do.
View 1 Replies View RelatedDear experts,
My MS SQL Server 2005 is generating the following error. may i know what's wrong with it?
"
The Collect Procedure for the "DTSPipeline" service in DLL "XXX:Program FilesMicrosoft SQL Server (x86)90DTSBinnDTSPipelinePerf.dll" generated an exception or returned an invalid status. Performance data returned by counter DLL will be not be returned in Perf Data Block. The exception or status code returned is the first DWORD in the attached data.
"
Thanks in advance for any assistance rendered.
pat
I am able to collect data from Progress DB, using ODBC Connectivity. The problem I am facing is, i have to iterate thru multiple servers. How do i configure ODBC source dynamically. It creates problem. Using expression, i tried to set the connectionstring dynamically, but it fails.
View 2 Replies View Related
Greetings:
I am trying to gather into a central location the missing index data from the sys DMV's for dynamic index creation in the next step. In trying to use a cursor, I get the following errors:
Msg 154, Level 15, State 3, Line 20
variable assignment is not allowed in a cursor declaration.
Msg 102, Level 15, State 1, Line 94
Incorrect syntax near 'Get_Data'.
Msg 16916, Level 16, State 1, Line 2
A cursor with the name 'Get_Server' does not exist.
Msg 16916, Level 16, State 1, Line 3
A cursor with the name 'Get_Server' does not exist.
Here is the SQL:
--CREATE PROCEDURE usp_Get_Missing_Index_Data
--AS
--Declare @Sql2 nvarchar(4000)
Declare @Sql nvarchar(4000)
DECLARE Get_Server Cursor -- gets a server name from a list of servers
for
Select MachineName from rsqlaudit1.DBStatistics.dbo.servers
Open Get_Server
Declare @Server nchar(20)
Fetch Next from Get_Server Into
@Server
While (@@FETCH_STATUS = 0) --and (@@FETCH_STATUS <> -2)
BEGIN
DECLARE Get_Data Cursor
FOR
select @sql= 'select distinct id.*
, gs.avg_total_user_cost
, gs.avg_user_impact
, gs.last_user_seek
,gs.unique_compiles
from '+@Server+'.master.sys.dm_db_missing_index_group_stats gs
,'+@Server+'.master.sys.dm_db_missing_index_groups g
,'+@Server+'.master.sys.dm_db_missing_index_details id
where gs.group_handle = g.index_group_handle
and id.index_handle = g.index_handle
order by gs.avg_user_impact desc'
exec (@Sql)
Open Get_Data
DECLARE @Handle int,
@database smallint,
@object int,
@equality nvarchar(4000),
@inequality nvarchar(4000),
@Included nvarchar(4000),
@statement nvarchar(4000),
@avg_user_cost float,
@avg_user_impact float,
@last_seek datetime,
@compiles bigint
Fetch NEXT FROM Get_Data INTO
@Handle,
@database,
@object,
@equality,
@inequality,
@Included,
@statement,
@avg_user_cost,
@avg_user_impact,
@last_seek,
@compiles
While (@@FETCH_STATUS = 0) --and (@@FETCH_STATUS <> -2)
BEGIN
insert into rsqlaudit1.DBStatistics.dbo.Missing_Index_data
values (@Server,
@Handle,
@database,
@object,
@equality,
@inequality,
@Included,
@statement,
@avg_user_cost,
@avg_user_impact,
@last_seek,
@compiles)
FETCH NEXT FROM Get_Data into
@Server,
@Handle,
@database,
@object,
@equality,
@inequality,
@Included,
@statement,
@avg_user_cost,
@avg_user_impact,
@last_seek,
@compiles
Fetch Next from Get_Server Into
@Server
END
CLOSE Get_Data
DEALLOCATE Get_Data
GO
CLOSE Get_Server
DEALLOCATE Get_Server
GO
Any suggestions are appreciated.
Thanks,
Derek
Hello,
I have some troubles with IBM WebSphere Application Server using MS SQL Server 2005 JDBC Driver. I always get the error e.g.
java.lang.SecurityException: class "com.microsoft.sqlserver.jdbc.SQLServerDatabaseMetaData"'s signer information does not match signer information of other classes in the same package
I found this Feedback but it seems to be closed.
A temporary solution for me was to delete the meta-inf directory of the JAR-File, but that can't be the solution.
Can anyone help me with this problem?
Simon
I have a job that runs each night that deletes all records from a table that are older than two weeks old. Is there some way I can view how many records were deleted from the table each night. Is it written to a log somewhere? Thanks in advance!
View 1 Replies View RelatedHi all,
This is my first thread here.
I got an information about
SET NO_BROWSETABLE ON/OFF
in your forum.. The replier told that this is an undocumented option.
My question is how you guys find information on such undocumented things....
Thanks in advance.
Saint
Hello,
Can anyone clarify the nuances of How to deal with the change management environment in SQL Server.
Thanks.
I am trying to get job information and have a query set up. However, I would also like to get the owner information. However, the job only stores the sid of the owner. Does anybody know how I could change this query to get the owner name instead of sid? Don't want to use the sp_help_job command.
SELECT @@SERVERNAME AS Server, msdb.dbo.sysjobs.job_id, msdb.dbo.sysjobs.name, msdb.dbo.sysjobs.enabled AS Job_Enabled,
msdb.dbo.sysjobs.description, msdb.dbo.sysjobs.notify_level_eventlog, msdb.dbo.sysjobs.notify_level_email,
msdb.dbo.sysjobs.notify_level_netsend, msdb.dbo.sysjobs.notify_level_page, msdb.dbo.sysjobs.notify_email_operator_id,
msdb.dbo.sysjobs.date_created, msdb.dbo.syscategories.name AS Category_Name, msdb.dbo.sysjobschedules.next_run_date,
msdb.dbo.sysjobschedules.next_run_time, msdb.dbo.sysjobservers.last_run_outcome, msdb.dbo.sysjobservers.last_outcome_message,
msdb.dbo.sysjobservers.last_run_date, msdb.dbo.sysjobservers.last_run_time, msdb.dbo.sysjobservers.last_run_duration,
msdb.dbo.sysoperators.name AS Notify_Operator, msdb.dbo.sysoperators.email_address, msdb.dbo.sysjobs.date_modified, GETDATE()
AS Package_run_date
FROM msdb.dbo.sysjobs INNER JOIN
msdb.dbo.syscategories ON msdb.dbo.sysjobs.category_id = msdb.dbo.syscategories.category_id LEFT OUTER JOIN
msdb.dbo.sysoperators ON msdb.dbo.sysjobs.notify_email_operator_id = msdb.dbo.sysoperators.id LEFT OUTER JOIN
msdb.dbo.sysjobservers ON msdb.dbo.sysjobs.job_id = msdb.dbo.sysjobservers.job_id LEFT OUTER JOIN
msdb.dbo.sysjobschedules ON msdb.dbo.sysjobschedules.job_id = msdb.dbo.sysjobs.job_id
I have a report where the information is getting cut off the report.
At the beginning of or at the ending of the page it is dropping the information.
My layout setting are set 8.5in wide by 11in height. .5in for either left or right margin. 1in for top and bottom.
I run the report and I'm missing a record.
I adjust the height to 10in to force diffferent page breaks and it's there.
I have the setting in one of the groups set for a page break at end. If I uncheck that it doesn't help.Still no records.
What is going on?
I'm looking for books or information on command line configuration of settings for things like activating Remote Connections under the Service Area Configuration and setting a port for that connection.
What books would be good to get or where can I download papers on this?
Any help would be appreciated.
Hi!This is a very simple question and I'm sure you guys will help me a lot.I'm using Visual Basic 2005 for programming. I have one table on my MS SQL 2005 database that has an int column with a counter that needs to be incremented when a user registers.So when reading the value I use a simple SQL query like this:
SELECT counter FROM companies WHERE company=0
then I store the value in a local int variable and then I increment it. Then I update the incremented value.
UPDATE companies ...
I need every single customer to have an individual value. My question is how can I prevent an error, data corruption or whatever if two or more users want to register at the same time? I've been reading about lock update but I'm not sure how to implement it on Visual Basic 2005 and I don't want to store scripts on SQL Server.
I'll appreciate your comments and help on this situation.
Hi,
I have a problem here in my SQL Server Database. I want to find which trigger is working backend affecting my table input. Since the original author of this trigger was somebody else, I am not able to find the trigger information
A simple line of syntax would be great.
Thanks in advance
sandeep
I am doing an audit of user information in our database and was wondering if there is a way for me to see the last time a user logged into the database. I am using a SQL Server 7.0 box. Any Information would be greatly appreciated. Thanks!
View 1 Replies View RelatedHi,
In my database one user is aliased like a guest. When i run sp_helpuser on the particular database it is giving following result.
username login name database
-------- ----------- --------
aaaa NULL XYZ
NOrmally we fill see like this for GUEST User. Now i want to drop this user 'aaaa' only. IF i use
sp_dropuser 'null'
i think guest user will also drop from XYZ database.
So can anyone pls suggest me how to drop this user. I have to add a same user with full permissions. i know in 65 we have sysalternates table gives all alias information. Is there any table gives the same information in sql7.
Pls suggest me regarding this.
thank u
raj
Hi,
I administering SQL server and one of or Db (size ~7 Gb) have a table with size 396 MB and 25 indexes created on this one. We working with this DB using Siebel Call center.
I have met a very strange situation: when I tried to get some data (using Siebel) my request take ~5 min. I run Profiler and catched this T-SQL statement which Siebel send to SQL server. After that, I run this T-SQL query using Query Analyser and found that Query Optimiser used wrong index. (clustered index) and try to compare every 470436 rows from the tables.
This is the statement. @P1, @P2, and @P3 just variable which siebel transfer to SQL server.
SELECT ........
FROM
dbo.S_EVT_ACT T1
LEFT OUTER JOIN dbo.S_CONTACT T2 ON T1.TARGET_PER_ID = T2.ROW_ID
WHERE
((T1.APPT_REPT_FLG != @P1 OR T1.APPT_REPT_FLG IS NULL) AND
(T1.TEMPLATE_FLG != @P2 OR T1.TEMPLATE_FLG IS NULL)) AND
(T1.SRA_DEFECT_ID = @P3)
But I found the very strange situation - when I manualy put the value '1-FRK' instead of @P3 - Query Optimizer used RIGHT index and I had a very good performance.
And addition when I tried to run the first Query on the same table but with the only 1000 rows the Query Optimiser choose right index.
Wat's on, wat happend with My Query Optimizer? Wy his decision so different from time to time?
Thank's a lot for any information about how to make Optimiser obedient.
I need to write an auditing trigger that will capture time of an insert and user that is making the insert. The time part i think i can use getdate(), but how can I find out which user is making the insert? Any help appreciated.
View 2 Replies View RelatedHi,
Can we retrieve the Login Failed and succedded for SQL Server?
I want to know the login failed and succedded information of SQL Server.
Can we retrieve the same?
Let me know ASAP.
Thanks and Regards,
Pramod
Is there any way to use Transact SQL to get the detailed information on a process like you get when you use the GUI interface under the Enterprise manager for server activity.
Thanks!
Is there a way to view the triggers on a table using query analyzer?
I have a developer that wants to see this information without having to right click every table in the database and viewing the triggers through enterprise manager.
Thanks,
Brad
I just started at a new company. The security stinks, everyone logs into the servers as sa (including many applications). I am taking steps to tighten security and restrict access to the sa login. I would like to capture some additional information at logon as an interim measure.
Can anyone assist me in automatically recording the following:
Host Name / IP Address
Login time
I realize I could periodically run an sp_who2 and capture the results - I also realize that if I turn on auditing, the logon will be written to the SQL Srvr LOG - I'm looking for an elegant / low impact way to capture the logon and host information.
Thanks in advance for any help.
Scott Wright
I'm trying to access data from one table by matching ids pulled from another table. I can't quite get the syntax though if anybody could help I would appericate it.
Here is where I'm at
select * from table1 where variable 1 = (select distinct(variable 2) from table 2 where variable 3 = variable 4)
Hi,
I'm trying to get the information about the user who modified the record in the table. I'm able to capture the datetime of modification through trigger.
CREATE TRIGGER [upd_dtm] ON dbo.Sample
FOR INSERT, UPDATE
AS
BEGIN
UPDATE Sample SET update_dtm = (SELECT GETDATE())
WHERE Sample.ID IN (SELECT ID FROM inserted)
END
I'm stuck, how to get the User who modified it?
Any help is greately appreciated!
Hi,
Does anyone has a script to find out what are the scheduled timining for all sql server agent jobs.
I'm trying to get the result with the following query, it doen't seem working..
select sj.name,
case sjs.freq_type
when '1 ' then 'Once'
when '4' then 'Daily'
when '8' then 'Weekly'
when '16' then 'Monthly'
when '32' then 'Monthly relative'
when '64' then 'When SQL Server Agent starts' end as Frequency,
case sjs.freq_interval
when '1' then 'Sunday'
when '2' then 'Monday'
when '4' then 'Tuesday'
when '8' then 'Wednesday'
when '16' then 'Thursday'
when '32' then 'Friday'
when '64' then 'Saturday' end as DAY
from sysjobs sj, sysjobschedules sjs
where sj.job_id = sjs.job_id
Any help would be greately appreciated.
Thanks
What i am trying to do is have the contact information to be displayed also. The contact information is in dbo.CONTSUPP under column 'contact'. Is there anyway to pass that 'contact' value up to the parent select statement. So the result will show Company, Address1,...,Source, contact.
SELECT Company, Address1, Address2,
Address3, City, State, Zip,
Country, Phone1, Fax, Source
FROM dbo.CONTACT1
WHERE dbo.CONTACT1.ACCOUNTNO IN (
SELECT ACCOUNTNO
FROM dbo.CONTSUPP
WHEREcontact LIKE '%test1%' OR
contact LIKE '%test2%' OR
contact LIKE '%test3%' OR
contact LIKE '%test4%'
GROUP BY ACCOUNTNO
HAVING COUNT(*) <= 1
)
I'm assuming that in one of the MSDB tables I can find transaction log information (current size, amount of space used.. blah blah).. but I can't seem to figure out which one.. any help is appreciated.. SQL 7.0
Travis