I have few chart based reports where I am showing different costs in series. I want to fix the colour of each type of cost so that I can maintain the same colour for each cost in different reports.
Is it possible?? If yes, then please let me know.
Thanks in advance!!!
Hi, all experts here,
Thank you very much for your kind attention.
I encountered a very strange problem again. Why the time series displayed on the chart are so strange? The Key time column I chose for my time series algorithm is cal_month(e.g 199001...), but why the date displayed on the time series chart is like :05/06/2448? (it should be like 199001..?) What is that data? And where exactly did it come from? What is the exact cause of this?
Hope it is clear for your help.
I am really confused on this and thanks a lot for your kind advices and help and I am looking forward to hearing from you shortly.
With best regards,
Yours sincerely,
I have a chart and i am populating it from a sproc.
In the Legend i am getting InvestmentPercent.Value- InvestmentName.Value - InvestmentPercent.Value
How can I just display InvestmentPercent.Value - InvestmentName.value
In the graph it looks
3- cash -3
38 - FixedIncome -38
how can I set this thing right...
Regards
Karen
I have added a pie chart to my report but the legend is not wide enough. Is there a way of altering the width of the legend?
View 1 Replies View RelatedHi All,
what I want is a custom Legend for the Pie Chart.
I have followed this article and have done what was written under
Custom Chart Color Palettes and Legends
http://msdn2.microsoft.com/en-us/library/aa964128.aspx#moressrscharts_topic4
But still the color of the legend is not uniform.
Basically I am using a stored procedure which returns two values : Circle, Total based on a parameter called Customer.
1. I have pasted the code asked in the Code Section of the report.
2. Have Disabled the 'Show Legend' box in Chart Properties.
3. Have included the following code in the Values->Appearance->Series Styel->Fill
=Code.GetColor(Fields!Circle.Value)
4. In the Category groups ->Group on-> this is my expression =Fields!Circle.Value (Basically I am not sure where
should I include Circle Field. I have tried this both by putting it in Category Groups and Series Groups.)
5. Dragged and dropped new table and have done the following
a.table1->Properties->Groups->Add->General->Group on Expression Fields!Circle.Value
b.Deleted Detail row.
c.Dragged and dropped rectangle in the column value and set the background value to =Code.GetColor(Fields!Circle.Value)
When I run the report for different customers the colors are not remaining constant. I have 17 values for Circles. So included three more colors in the "colorPalette " variable..
After doing all this still I am not able to get the same colors. Could someone tell me where I am going wrong?
So how do i solve this sql statment
Select distinct colour from wwwstocktbl where colour <> ' ' order by colour
The stament works as a statment but when run in asp i get an error as theres no primary key, but if i add the primary key then the select distinct fails
Select distinct ProductCode, Colour from wwwstocktbl where colour <> ' ' order by colour
.......I need to know how to have that displayed before the reports are ran. I'd like to have in the Report Parameters area so users can see this information when making choices for the reports.
View 1 Replies View RelatedHi to everyone,
Is it possible (and if so, how should it be done?) to change some settings (i.e. the background colour) when user puts the mouse over a cell?
Thanks in advance,
Jesus M
Hi,
I am having trouble really understanding what makes a model accurate and effective at predicting some attribute. I can't seem to find any clear documentation about the mining legend of the lift chart on the Mining Accuracy Chart tab when working with the Data Mining Structure designer in VS 2005. Specifically, I would like to know more about what numbers in the Score, Population Correct and Predict Probability columns mean, and why they change when you move the vertical gray bar on the Lift Chart. Also, what is generally a good score to be aiming for, provided that it is highly difficult to get 100% accuracy with the kind of data that I am using.
Any more information on this subject is much appreciated. Thank you for your time,
Chris Burns
I am trying to develop a report that will show a 100% stacked bar graph for many teachers. Each teacher will have there own graph. The series in the report are the percent of scores given on a test, with each test in a group. Scores are given on a scale of 1-4. Most of the time a teacher will have all fours scores in there data; however it is possible to only have 2 or 3 of the scores. How can I set the legend up so that all scores across all the graphs show the same color for the same data series? Right now I get something like this.
First Graph
4: Lime
3: Purple
2: Blue
1: Green
Second Graph (no values for 1 or 2)
4: Blue
3: Green
I need the second graph to be
4: Lime
3: Purple
I have a Pie Chart report that works well until Users discovered that when values are 0% or less across the chart, the Legend returns NaN. How do I format the Legend to return 0% instead of the NaN that Users do not want to see. Below is my express for the Legend Property="#AXISLABEL" & " - " & "#PERCENT{P0}".
View 5 Replies View RelatedAny change or bug in SSIS 2012 which doesn't allow you to change the font colour of an annotation. I am able to change the font type,size and style just not the colour. I have migrated packages from 2008R2 with colour and when placed into 2012 they show as black although when I check the setting they still indicate they are set to the particular colour.
I am running SSIS 2012 version 11.0.5058.0 in Visual Studion 2010 shell Version 10.0.40219.1 SP1 with MS .NET Framework Version 4.5.51641 SP1.
I have a chart on a report that shows value in � on the Y Axis. The values can be both positive and negative. I would like to have the negative labels to show in red and the positive in black. What is the expression syntax to achieve this? i know it will be an IIF statement, but what is the syntax to show the Y Axis label as <0?
eg if i was doing this for a field it would be iif(Field!Fieldname.value <0, "RED","BLACK") but what would i replace the FIELD!Fieldname.vaue with so the expression would change the Y Axis label.
Thanks in advance for any help
Dave Munro
i want to apply a hatch pattern to the fill colour on my bar graph and it doesn't work. i select fill colour, then i select hatch colour, i preview and it doesn't show the hatch pattern.
i would use gradient only i use 2 colours the same (hence why i want to differ them in a way other then colour) and they show up the same in the legend - legends don't display gradients
Hi,
I have a matrix table with a subtotal column
I would like to make the background colour off this different to the rest of the matrix, how would i do this.
Also I would like to make some portions off the matrix results a different colour as well, how I can i acheive this
thanks
Is there any way I can set the background colour for an image in a table cell (or even for a non-embedded image for that matter)? I always seem to get a white background.
It is a GIF image file.
Thanks
After days of trying to deploy my web application along with the ASPNETDB database I am convinced this is actually just an attempt on the part of the MSFT developers to drive us nuts.
It simply will not work. As reported by everyone in all of the forums, it works fine in development but does not work when deployed. If I move my data to a full SQL Server instance and modify all of my connection strings accordingly, it works fine, as well. It just does not work when I publish the app and try to run it using the AttachDBFilename methodology. I am convinced that only Santa Claus or an honest lawyer can make it work.
Let's recap the steps: first, I create the folder that I want to use for production and give Modify permissions on that folder to <machine>ASPNET and NETWORK SERVICE. Then I open up IIS Administrator and create a new virtual directory that points to that folder and set its permissions to include Write. I check the ASP.NET tab and it's set for 2.0. Now I switch back to VS2005 and publish my web application directly to the target folder.
Feeling optimistic, I go right to IE and bring up the site. Looks good until I attempt to login. That's when I get the first error - Failed to generate a user instance of SQL Server due to a failure in copying database files. The connection will be closed.
From there I start through the forums and try every one of the solutions proposed, even though none of them specifically identify this error wording. I know I should have used the wording from the Exception "Details" - except they state exactly the same thing - what was I thinking? I thought the .NET developers did away with the error message authors from the old days but it looks like they're back with a vengence.
Somewhere along the way I am able to get past that first error. Unfortunately, I've made so many changes I don't know which combination actually worked. But it doesn't matter because now the database is refusing to let <machine>ASPNET login! Okay, so I use SSME and create a login attach the database and create a user (none of which is supposed to be required for UserInstance=true). Detach the database and try IE again. You guessed it - still won't work. Now it can't generate the user instance because a database by that name already exists, or the user doesn't have permissions, or it's Friday and the machine wants to leave early - I give up.
So, at this point, I'm pretty much finished with SQLExpress for anything other than my development environment.
Is there anyway in SSRS 2008 to sort the Legend on a chart? Right now I am unsure as to how it is currently sorting. I see a property to Reverse the order, but I don't see anything to alphabetize it.
View 8 Replies View RelatedI was trying to write a custom legend text for a chart that I have in SSRS. In the chart I have a Bar chart and a Line chart. I have two values coming from a dataset. One is a running value. All the series values are from year dataset.
I need to get a custom legend text for the three data series looking like this. "2013- Mth", "2014-Mth". Year should be dynamic and coming from the dataset.
I tried writing an expression in the series legend option as shown below.
But I don't get the required text for the chart. I only get the default series text for the legend. If I only write a text without the dynamic year taken from the dataset columns I get the custom text. But not when I concatenate the dynamic year series with the static text. Any property to enable/disable?
I am creating a matrix in which row color changes alternately(1st row white second row blue and so on .) now i am calling this matrix as a sub report in other report and i had applied grouping on that row in which this MATRIX is called the problem i am facing is in first sub report 1st row is coming in white color while in second sub report 1st row is coming as blue color background And so on...
Why so is happening as i want 1st row as white and second row as blue i all sub reports .
I have an issue in trying to format rows base on conditions. Below is a replication of the tables and the select statement.
CREATE TABLE #CompareVal
(CompareValID INT Not Null
, ValName NVARCHAR(75) Null
, Vehicle INT Null
, Driver INT Null
);
GO
[Code] ....
First issue, James and Jane does not have a driver available and that should show "No Driver available"I am to compare values in VehicleAvailable and DriverAvailable to the first row - (Group Value Standard row) so that when a value is less than the value in first row, it should be Gold, if equal to, Blue and if greater than then, Red.
The first row is to be Black. In other for me to be able to compare, I added columns like so:
SELECT #CompanyName
, [Description]
, ISNULL(CAST(VehicleAvalible AS NVARCHAR(30)),'N/A') AS VehicleAvalible
, ISNULL(CAST(DriverAvailable AS NVARCHAR(30)),'No Driver available') AS DriverAvailable
, 0 AS TotalVehicles
, 0 AS TotalDrivers
[Code] ...
And my expression for "VehicleAvailable" column is :
=Switch(Fields!Description.Value = "Group Value Standard" AND Fields!VehicleAvalible.Value = Fields!TotalVehicles.Value, "Black"
, Fields!Description.Value = "Group Value Standard" AND Fields!VehicleAvalible.Value < Fields!TotalVehicles.Value, "Black"
, Fields!Description.Value = "Group Value Standard" AND Fields!VehicleAvalible.Value > Fields!TotalVehicles.Value, "Black"
[Code]....
This doesn't work as I am comparing integer against text value. How do I format to get result like the below image?
I was wondering whether it is possible to change the font color of a cell depending on the value of the cell.
For example I want to set a Variance value to Red if the value is less than zero.
Hi,
I am currently trying to figure out how to change the background colour of a cell when that row happens to be a subtotal
I have included a screen shot of my report design below:
(The link to the image is http://diagnostic.iipuk.co.uk/images/RS_Questions.JPG should the image not be displayed)
When the cell that is circled is on a subtotal row (i.e. is the subtotal of either the first subtotal (which I have called RegionTot) or the second subtotal (which I have called QCTotal) I want the background colour to change to black). This is so the user cannot see the subtotal for that column on the screen.
I have tried using the following expression in the background colour property for that cell (without success!):
=IIf(ReportItems!QCTotal.Value = "Total", "Black", "White")
The error that comes up states that report item expressions can only refer to other report items within the same grouping scope or a containing grouping scope.
I have searched help and haven��t managed to find anything!
Any help would be greatly appreciated!
Thanks
Marek Kluczynski
Information Manager
Investors in People UK
Is it possible to remove the tick marks that I have circled in red?The chart has data Week by week over a year, and the T1, T2 etc are equivalent to Quarter1, Quarter 2 etcI've got a 3 level grouping, with the top level being Year, then Quarter, then Week. The label for the "Week" grouping is set to blank, and that's why you don't see it here.Removing the Tick marks would make the chart legend more readable in my opinion.
View 2 Replies View RelatedI am new to ssrs super scripts. I want to display superscript as B with bold & red colour for one column data
o/p:
Name:
America B
India B
UAE B
Here B is super script & red color....
I want to change my text box text colour for following ;
MY data was:
column name: NAme
Unitedstatesofamerica
america state
Northamerica
southamerica
America should be bold and red colour.
I want to write expression to BOLD and change colour in ssrs for America.
Hi,
I have just run a simple data set through a model to predict a simple true or false value (i.e. binary output)
The Lift Chart/Mining Legend in Analysis Services shows three results �� Score, Population Correct (%), and Predict Probability (%)
Population Correct I beleive is the percentage of predictions it got right out of the total number of predictions it tried to make. Is this correct?
However, I can��t work out how the other two are derived in particular the 'SCORE'. To give a live example the scores were as follows:
Model Score Pop Correct Pred Probability
Decision Trees 0.83 76.59% 54.28%
Neural Network 0.75 67.63% 50.05%
Ideal Model 100.00%
Can anyone help with this and give a detailed explanation?
Many thanks,
S Rajput
Hi,
I have setup a chart with series on right hand side.
The series is from one of the fields.
How is it possible to remove series and instead place each series name on a graph line?
Or at the very least, how can I place a text on each graph line?
Thanks
I m using the Time Series Algorithm to forecast sales across regions for various products. Assume the model is built with last 3 years data with the periodicity being monthly.
Is it possible that sometimes I can make predictions based on just 1 yr or 2 yrs data for certain products alone or certain regions alone? Can this be done without having to retrain the already built model?
Also, is it possible that using the model, i can predict week-wise / month-wise / quarterly sales as well?
Hello Forum,
I am have posted questions regarding selecting a series of dates and am still having trouble doing so. I have been using vwd to build a website, and now would like to retrieve data from access and display a weeks worth of information at one time from selecting a column of information from the data base. I have used this section of code to do the required function. 'SELECT OrderId, CustomerId, Price FROM Orders WHERE OrderedDate BETWEEN DATEADD(d, -7, GETDATE()) AND GETDATE(), I have replaced these variables with my own, and keep getting an error message 'Undefined function 'GETDATE' in expression', I have tried many different functions to get it to work. Any ideas?
Thanks Forum,
Tim
p.s. thank you todd for replying to my first question!
Hi All,
I have a table Test1:
ID date Value
AAUGVAL 2/27/198760.848
AAUGVAL 3/2/1987 64.288
AAUGVAL 3/3/1987 63.77
AAUGVAL 3/4/1987 62.495
AAUGVAL 3/5/1987 62.65
AAUGVAL 3/6/1987 62.548
AAUGVAL 3/9/1987 62.292
AAUGVAL 3/10/198763.045
AAUGVAL 3/11/198763.021
....
I am trying to see the value % changes day by day and here is is the code I wrote:
select
starttime=cast(v.date as char(8)), endtime=cast(a.date as char(8)),
startval=v.Value, endval=a.Value,
change=substring('- +', sign((a.Value-v.Value)+2,1)+ cast(abs(a.Value-v.Value) as varchar)
from
(select date,Value, ranking =(select count(distinct date) from Test1 T where T.Value<=S.Value)
from Test1 S) v left outer join
(select date,Value, ranking=(select count(distinct date) from Test1 T where T.Value<=S.Value)
from Test1 S) a
on( a.ranking=v.ranking+1)
I got the following error message:
Server: Msg 174, Level 15, State 1, Line 4
The sign function requires 1 arguments.
Server: Msg 170, Level 15, State 1, Line 7
Line 7: Incorrect syntax near 'v'.
Server: Msg 170, Level 15, State 1, Line 9
Line 9: Incorrect syntax near 'a'.
Could someone please help with this? Thank you in advance!
shiparsons
I have a large number of relatively simple sql queries that each perform tests on different tables returning different columns and rows for each test.
I would like to be able to run all of these at once and get the output in a usable format.
Would it be possible to run a single query or store procedure which could perform each test then output the results from each test to a new sheet in excel?
Could it output the results of each test to individual csvs?
if
(datalength
(cast_varchar
([Costpoint].[Profit_Calc_Consolidation].[PD])
) = 1)
then
(0 ||
cast_varchar
([Costpoint].[Profit_Calc_Consolidation].[PD]))
else
(cast_varchar
([Costpoint].[Profit_Calc_Consolidation].[PD]))
Goal:
To be able to tell the Period number ([PD]) to change from an integer to a var_char so that it can be concatenated with the Fiscal Year. I.e. Fiscal Year || Period number to produce the following results.
2006 01
2006 02
2006 03
Etc……
Status of Problem:
The issue is that I can only get it done to the point to where the Fiscal Year || Period number yields the following results:
20061
200610
200611
200612
20062
Etc….
This is as issue since I am trying to get all the information from the past to a certain year and period. Using a filter that says
Fiscal Year + Period Number <= ?Prompt_Fiscal_Year? + ?Prompt_Period_Number?
So if I enter Year: 2007 Period 3
I should get:
2006 01
2006 02
2006 03
Etc…….
2006 11
2006 12
2007 01
2007 02
2007 03
Can you please let me know if my thinking is off or if my SQL is wrong, Thank you for your assistance in this matter.