Hi,
I have a report based on a line chart.
The values on X-axis are scaled from -100 to +100. I want to colour the band from -100 to 0 with red colour and that from 0 to +100 in green colour, and i want to provide legend for these bands/sections. How can i do this?
A prompt response would be really appreciated
Thanks a lot!!
Simranjeev
Hello,
I need to know what means are available to change the Minimum and Maximum Y-Axis scale values rather than leave them simply as they are in the properties.
Right now whatever min/max values I enter into the scale for the Y-Axis are unchangeable.
I need to be able to change the min/max scale values based on the value of the data at run time.
Any help is appreciated.
Thanks.
Hi,
Two questions both on Line charts:
Is it possible to give the marker of a line chart a different colour from that given to the line?
Is it possible to make only the line in the line chart invisible? My requirement is to keep only the markers.
Regards,
Emil
I have a simple-column chart and in the x-axis I put the date values and in the y-axis the sale price values.
The chart works perfectly in the case when there is only one sale price for the same date. But, when the price changes during the same day, then there is problem. In the following example
x y
1/1/2007 6.25
2/1/2007 7
2/1/2007 4
3/1/2007 8
the chart will have three columns and in the date 2/1/2007 will display the min or max of the two values. What I need is to represent all the values i.e. the chart must have four columns , as much as the rows of the dataset
Is it possible?
I have a report designed in SSRS 2008 R2.My issue is that the data labels do not stay outside the bars for high values.
View 4 Replies View RelatedHi guys,
I have this problem with reporting services wherein my report contains an Area Chart. My plot points is about 100,000 records. The problem is sometimes the Chart is displaying right and sometimes its not. The users need to refresh the report again for the chart to display right. This doesn't happen if my records to plot contains around 10,000 records.
Does RS have a limation in plotting records in an Area Chart? Any solutions?
Hi, how do I change the scale of x axis to a larger time scale than the data ?
Data is in quarters and I want that to be displayed in a line graph, but I want the labels to show hours
(it becomes messy otherwise when showing several days)
Thank You,
Regards
Göran
I want to display a chart with a minimum y-axis of -10%. When use the value -0.10 the result is a minimum of -100%. Is this a bug?
-Jeroen
I created the below graph in PowerView. The Y axis shows values in % but I want to change this to millions. How do I do this?The Y axis value is the result of a calculation that is formatted as currency in the PowerPivot Manager.
View 2 Replies View RelatedI'm trying to convert an old chart to Reporting Services.
We have used the same dataset for years, it is very very simple. But it seems to me that Reporting Services can't deal with this simple dataset.
My question is: How can I get create a line chart using this dataset.
The data set consists of 1 row with 96 columns (a day divided into 96 sets of 15 minutes). Each column records how many events occurs within the 15 minutes. Along the x axis I would like to display a vertical line every 4 hours. The y axis should be numbered 0 to the highest value in the results.
I could not make this dataset any more simple than it is. But Reporting Services just chokes on this.
Here is a sample of the dataset :
1 2 0 4 5 6 7 8 9 10... 96
Can you have different scales on a bar chart. I want to chart sales and quantity. Oracle lets you label the top of the bar chart as money and the bottom as quantity.
I am dividing my sales by one million and quantity by one thousand to make them similar in size on the same chart. I am using the sum of the sales/1000000 as a point label. Is there any way to limit the number of decimal places displayed. Currently it is displaying something like 1.94889312043; 1.95M would be better.
Thank you.
I created a graph which retrieves value from database.And currently,my axis is in ranged 0-10.But i have a doubt that my value in will exceed my maximum y-axis value 10..My question is, could it be possible that i make my y-axis dynamic??Thanks!!
View 5 Replies View RelatedFriends, I would like to put employee name and type of leave on the y-axis and on the x-axis the date, so that users can select the date start and end and employee/employees and see the chart or leaves.
But how to do that?
My fields are: Name, LeaveDescription and Date.
The data with me is for each employee, for each date, leave codes are there.
Hi
I need to scale barchar or any other chart in sql server 2000
i need to know the possiblity of this in SQl 2000
Regards
Hi there,
I have a case. I have 3 numeric fields and 1 category field to be displayed on bar chart reports. the problem is 2 of the 3 numeric fields have significant different scale value. so I need to add additonal scale at the right side of bar chart to represent 1 numeric fields + the 2 other numeric fields at the left side scale (Y). Please advice. Thanks.
R'gards
Toni
I have a stored procedure which will bring me back the Min, Max and Mean of different result sets. What I want to do with the Y-Axis is set the Min scale value of the chart to be Min -%5 and the Max scale value to be Max + 5%.
Is there a way to change the Y-Axis values at report run time without spitting my own RDL?
I'm just getting into creating charts and one I'm working on could realy do with a prefix on its axis label, the symbol '£'.
I honestly have no idea how to do this and what syntax to use, can anyone help ?.
Also as the label could do with having a thousands seperator as well but as you can tell I'd have no idea how to do this either.
Thanks.
How is it possible to have the values on the chart x-axis to be shown vertically rather than horizantal?
Thanks
Hi!
In SSRS2005 I made an chart,
but on x-axis I only want date-part (if possible ISO-format yyyy-mm-dd).
The resulting chart shows date AND time-part. How to avoid this?
thanks.
i put the formula day(Parameters!Parameter1.Value) into my y-axis's major gridlines interval value, and it doesn't obey the value i put in.
is this a bug or another "feature"?
when i just type in "31" is works as expected.
is there a work around for this?
Hi
I have a report where i am using line chart with date column for grouping.
For X axis i have choosen the "NUmeric or Timescale Values". In the Chart the dates are displayed in this format 1/1/2007 12:00:00 AM . I don't want Time part to be shown
If possible i want it to be shown as 1-Jan. The Chart should display Point even when there is no record returned from the query.
Say DATE Column
Date AMOUNT
1/1/2007 12:00:00 AM 10
1/3/2007 12:00:00 AM 20
1/4/2007 12:00:00 AM 30
Now the Chart should plot from 1/1/2007 to 1/4/2007 including 1/2/2007
Any help on this will be appreciated
Thanks
Smitha
Hi!
How can I format number on chart's y axis? I wanto to show 1.000 instead of 1000.
Thank you!
Is there a possibility in SSRS to have  One stacked bar of cumulative sum of different ID's and and Line Chart at left hand of the Bar which will show the Progress as soon as the ID turn to Competed status.
I have been trying to do this , however there is huge problem of scaling:
The line should be finished at all the completed ID's SUM which is the lowest stack of the Bar.
However , the bar gets stretched to all of the space.
I have tried to place it into Tab lix, But it doesn't work.
I have a pivot chart that displays 3 data series.Series 1 values range from 17 to 106.Series 2 values range from 1 to 18.Series 3 values range from 0 to 1.When I display all three series on the chart, the value axis labels run from1 to 120 with major unit lines at intervals of 20.When I remove Series 1, the chart automatically adjusts itself and thevalue axis labels run from 1 to 20 with lines at intervals of 2, thusnicely accommodating the value ranges of Series 1 and Series 2.All this is fine. But when I remove Series 2, leaving only Series 3,the labels run from 1 to 1.2 with interval spacing of .2. Since thesevalues are counts, it makes little sense to show decimal values.Can anyone provide advice on how to keep these axis labels fromshowing decimal values, if a user removes Series 1 and Series 2?Thanks.- Bob
View 2 Replies View RelatedI have a chart on a report that shows value in £ on the Y Axis. The values can be both positive and negative. I would like to have the negative labels to show in red and the positive in black. What is the expression syntax to achieve this? i know it will be an IIF statement, but what is the syntax to show the Y Axis label as <0?
eg if i was doing this for a field it would be iif(Field!Fieldname.value <0, "RED","BLACK") but what would i replace the FIELD!Fieldname.vaue with so the expression would change the Y Axis label.
Thanks in advance for any help
Dave Munro
Is changing the display format of the Y axis of a column chart supported in the Sept CTP or is it going to be supported in the official release? For example I have built a report model with the numeric sales values set as 'C' for currency and have created a simple bar chart with year on the category axis and sales on the Y axis. The problem is that the Y axis displays as a general number (10000000) and would like to display it as a currency ($10,000,000). I can't for the life of me figure out how to display the Y axis as currency in Report Builder.
View 2 Replies View RelatedI have a chart that I am grouping data by Year, Month, day then Hour (this is to view server performance data) - however i need the label for the hour grouping to be in the format of HH:MM and not H:M by using expression
=HOUR(Fields!Timestamp_perfmon.Value) &":"&MINUTE(Fields!Timestamp_perfmon.Value)
...but this as you would kind of expect returns 0-23:0-5 ie 18:1 whereas i need it to return 18:12 or 8:12 PM..
when i change the format code for the x-axis it unfortunatey screws up all my other group by values and labels..
can anyone help? Please....
I need to create area chart using SSAS cube which will be having :
sum(A) as per the Series group i.e Projects (expression used is Sum(Fields!Demand_FTE.Value))
Sum(B) as per the CategoryGroup1Â =Sum(Fields!Demand_FTE.Value,"CategoryGroup1") where categoryGroup1 is calculated date
And Sum(C)Â =Â sum(Lookup(Fields!Time_FY.Value,Fields!Time_FY.Value,Fields!Capacity_FTE.Value, "DataSet2")).
I want Sum(C) to be calculated on Fields!Time_FY.Value (which is  CategoryGroup2)
Sum(C) do not have any links with CategoryGroup1 and that is why my graph is synchronized.
Sum(A and B) belongs to Dataset1 and SUM(C) belongs to Dataset2
I have an stacked chart with line with markers. The scale on the right side is the finished good which has a min qty of 383 while the highest is 52439. how can i set this scale that start from 0 to 300 and soon. right now under scale properties I set the max to 60000, the min is set to auto while in the interval properties i set this to 10000. How this line marker adjust the scale quantity (fisnished good).
View 2 Replies View RelatedHi
please excuse my ignorance but if someone could point me in the right direction i would be grateful.
i have produce a chart with some data against date points on x axis. i have another date field which i want to combine with the orignal date axis is this possible .
ie
table
results planned date Acutual date
10 02/03/07 01/03/07
46 03/03/07 03/03/07
60 06/03/07 07/03/07
i want to combine the planned date and actual date as an x axis
thanks
I have a chart that I am grouping data by Year, Month, day then Hour (this is to view server performance data) - however i need the label for the hour grouping to be in the format of HH:MM and not H:M by using expression
=HOUR(Fields!Timestamp_perfmon.Value) &":"&MINUTE(Fields!Timestamp_perfmon.Value)
...but this as you would kind of expect returns 0-23:0-5 ie 18:1 whereas i need it to return 18:12 or 8:12 PM..
when i change the format code for the x-axis it unfortunatey screws up all my other group by values and labels..
can anyone help?
I have a line chart which works great except when the x axis displays duplicate months. I have tried format codes of MM-YYYY and MMM and have the "numeric or time-scale values" checkbox checked. The data displays fine but the X axis in the case of the MMM format code displays as:
Sep Oct Oct Nov Nov
leaving the user to wonder where exactly does October and November start...
I've googled around but don't see off-hand what I am doing wrong. I am display 3 simultaneous lines if that matters...
Thanks!
Craig
What is the best optimised options to display the date labels with bi-weekly intervals starting date Date from one month to three months future from the current date?
As per above requirements, I have built the below line graph query and graph, currently it only displays the date labels as per data but I need to display date labels with bi-weekly intervals starting date from one month to three months future from the current date. Also another issue found, if there are few more date labels then does not show all labels on horizontal axis.
Select
/* Set Week End date as Sunday */
DATEADD(DAY, 7 - DATEPART(WEEKDAY, t.TaskBaseline0FinishDate), CAST(t.TaskBaseline0FinishDate
+1 AS DATE)) as[WeekEnd]
,count(t.TaskBaseline0FinishDate) as Baseline
,count(t.TaskFinishDate) as Finish
[Code] .....