How can I compare column in the same table and show only column and value that has been changed.
declare @t table (GroupID CHAR(6),Text1 VARCHAR(MAX),Text2 VARCHAR(MAX),Text3 VARCHAR(MAX))
insert into @t
SELECT '11111','Text1','Text2','Text3'
insert into @t
SELECT '11111','Text1','Text2','Text4'
END RESULTS:
Column Name Old New
Column 3 |'Text3' |'Text4'
I want Compare two Table data and insert changed field to the third table ...
View 9 Replies View RelatedOn sqlserver 2000 transactional replication:
How would I best go about changing a published table's column from smallint to int? I could not find anything about it in BOL or MS.com. I do not think EM/Replication Properties allows the change. I suspect I have to run "Alter Table/Column" on the Publisher and each Subscriber the old-fashioned way. Is that true?
Thanks!
I'm pretty new to sql server and now I need to create a script that:
Compares the values of the row with the same id as the row with the update table(which has updated values in it) in which the price, description or replacement part have been changed.
If they did change they should be updated and if they haven't been changed nothing should happen...
Working on partitioning a few large tables. One of the tables included a text column and the €œTEXTIMAGE_ON [PRIMARY]€? clause which would prevent the partitioning of this table. After some research we found that the data was legacy and no longer used. We updated the column on the affected rows to NULLS and altered the column to a VARCHAR(20)
When I attempted to run the ALTER TABLE SWITCH I encountered the error
Msg 4947, Level 16, State 1, Line 1
ALTER TABLE SWITCH statement failed. There is no identical index in source table 'LocalDeltanet.dbo.testresultsjoe' for the index 'PKIDX_testSummary' in target table 'LocalDeltanet.dbo.testresults_part'.
After a lot of grief and testing I determined that the message was bogus and the real issue is that the 'sys.tables' still has €œlob_data_space_id€? with a value of 1 for this table.
I created a copy of the table with the text column altered to varchar and one with just the varchar to begin with. After copying data from the original table, I tried to run the alter switch. It failed once again for the text column altered to varchar table, but it worked for the varchar from the start.
Since it appears that this value is causing my issues, is there anyway to update the table in place. I know I can BCP the data out, but that would take too long and would defeat the advantage of using the alter switch method.
BOL States:
The allow updates option is still present in the sp_configure stored procedure, although its functionality is unavailable in Microsoft SQL Server 2005 (the setting has no effect). In SQL Server 2005, direct updates to the system tables are not supported. This means we cannot update the table manually.
Thanks
I have table with the following structure :
ID Result1 Reusult2 NewResult1 NewResult2 FinalResult
-1----10------6-----------7------------9----
-2----32------16----------32-----------16---
-3----12------2-----------1------------9----
-4----50------6-----------9------------7----
-5----90------9-----------90-----------9----
-6----18------2-----------3------------2----
My problem :
I want to compare each record in column Result1 and NewResult1,Result2 and NewResult2
Such as my above table :
With ID=2 and ID=5 : I need to update column "Final Result" with value equal 1 ,otherwise any records with value equal zero.
Conclusion :
If ((Result1=NewResult1) and (Result2=NewResult2)) --> Final Result =1
else
Other Records -->Final Result=0
How to write sql statement ?
Thank you very much !
I have a table with some rows and columns what i want is i want to Show sum of particular column in the last row. This is my code.
SELECT DISTINCT Cluster.ClusterName, Gruppe.GruppeName, Arbeitspaket.ArbeitspaketName, BMWProjekt, AnzahlAP, Abgerechnet, InBearbeitung, Billanz FROM Bestellung
INNER JOIN Cluster ON Bestellung.Cluster = Cluster.rowid
INNER JOIN Arbeitspaket ON Bestellung.Arbeitspaket = Arbeitspaket.rowid
INNER JOIN Gruppe ON Bestellung.Gruppe = Gruppe.rowid
WHERE Projekt ="EA-284-Nxx" AND AnzahlAP <> 0 AND Abgerechnet is 1 AND InBearbeitung is NULL AND Billanz is NULL;
I am using table object to present report.
table row1 has all the column names and table row2 has the data.
How can i put a horizontal line between column names and the data rows.
Thank you very much.
My Requirement IS : 1<sup>st</sup>run: if the record does not exist in the table insert the record (file_name, last_modified_file_date) and create a copy in the archive folder with file_name_currentdate.csv
Daily run: retrieve the last_modified_file_date from the input file and check if the retrieved date is greater than the last_modified_file_date in the table:
If true: create a copy of the input file in the archive folder and update the last_modified_file_date in the table with the retrieved date
If false don’t do nothing because the file has been archived in one of the previous runs.I have already retrieving the modified date and File Nae iserting into Filename Table: (That table has 2 columns which are FileName and FileDate) so In script task everytime the variable getting Modified date(retrieve the last_modified_file_date from the input file). How I can Compre the existing table record and variable. I have already imported the all Filenames and Modified into table like below.
Hi All,
I have following problem
please help me to resolve it.
There is table for shipping
as follows:
City
Kg
Rate(rs)
Rajkot
1
25.00
Rajkot
2
30.00
Rajkot
3
42.50
Ahemedabad
1
42.50
Ahemedabad
2
55.00
Ahemedabad
3
67.50
Ahemedabad
4
80.00
Goa
1
90.00
Goa
2
105.00
Goa
3
120.00
Gondal
1
25.00
Gondal
2
30.00
Gondal
3
42.50
Morbi
1
25.00
Morbi
2
30.00
Morbi
3
42.50
Gandhinagar
1
42.50
Gandhinagar
2
55.00
Gandhinagar
3
67.50
Gandhinagar
4
80.00
We need to display
the table in html page using any Asp.Net language.
The result table should be:
City(s)
1
2
3
4
Rajkot,Gondal,Morbi
25.00
30.00
42.50
-
Ahemedabad,Gandhinagar
42.50
55.00
67.50
80.00
Goa
90.00
105.00
120.00
-
Baruch
70.25
80.00
92.00
120.50
Description:
- Display all the cities
together for which all the shipping charges for (1-4) kgs are same. The range
of kgs is not fixed.
Reply as soon as possible.
Thanks
Table MediaImportLog
column ↘ImportIndex ImportFileTime ImportSource
value ↘80507 20060506001100 815
80511 20061109120011 CRD � P.S the values type of ImportFileTime 20060506001100 → 2006 -year 05-month 06-day 00-HH 11-minute 00-second】
Table BillerChain
column↘BillerInfoCode ChainCode
value ↘750 815
value ↘81162 CRD
Table Biller
column↘CompanyCode BillerCode
value ↘999 750
value ↘81162 516
TAble DataBackup
column↘CompanyCode Keepmonth
value ↘999 6
value ↘81162 12
---------------------------------------------------
when I'm in MediaImportLog , I want use column ImportSource to compare with column ChainCode in table BillerChain ( so I get BillerInfoCode) and then use the BillerInfoCode I got to compare with column BillerCode in Table Bill ( I get CompanyCode) finally I use CompanyCode to compare with column CompanyCode in table DataBackup so I can get the company's keepmonth
How can I get the keepmonth? can I use parameters ?
thank you very much
I have a simple table data i want want to show row data in to column data.
     Â
SELECT clblcode,mlblmsg
FROM warninglabels
My expected result will beÂ
0001Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â 0002Â 0003Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â 0004
-------Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â ------- --------Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â --------
May Cause....       Important..... Take madi...........         Do Not Take.......
I had an issue that I ran across that I got solved but it was very monotonous. Here is my issue:
I have an SQL function that takes in 2 parameters (lookup category and lookup code) and with those parameters is goes out and find the lookup code description. I have this function in about 40 computed columns. It isn€™t the best way to do things but we need it for some legacy stuff. The problem occurs when I need to make a change to that function. I can€™t because it is being reference by all of the tables. So what I have to do is go in to each of the tables and remove the function from the column formula. Then change the function and then finally add that function back to the column.
Here is what I did.
I went to the syscolumn table to find all of the computer columns. I went to each of those columns and removed the formula and added it to a text document. Then I changed the function. I then wrote a stored procedure that would add the column back. ( I couldn't find a way to use the ALTER COLUMN to add the function so I had to drop and then add the column )
Here are the possible scenarios that I want to see if they are possible.
1) Somehow €œturn off€? the dependency between the function and the column. That way I can just update the function.
OR
2) Programmatically grab the data from the column formula and write that some place and clear out the formula. Then update the function. Then finally take all of the data that was cleared out and write it back to the column.
Does anyone know how to make this easier?
I am writing a db conversion for a retail grocery chain. This chain uses pricing zones to designate what stores get a certain price
Example:
Cheetos
Zone A: $2.79
Zone B: $2.89
The pricing data in the tables is listed by zone. However, the new product uses pricing by store.
Zone A contains stores 1,2,4,6,7....
Zone B contains stores 10,11,12,14.....
I need to be able to duplicate the rows in a manner that I can take the row containing a price for Zone A and duplicate it for each store in the zone. I have a table of stores with corresponding zones.
So I'm looking to go from:
Zone UPC Price
A 1234500000 2.79
B 1234500000 2.89
To:
Store UPC Price
1 1234500000 2.79
2 1234500000 2.79
10 1234500000 2.89
11 1234500000 2.89
I have a need to insert rows into an Audit type table when valueschange in certain fields in a table. I thought I could do this via atrigger. However, on requirement is to include in the audit both theold and new value.Is there a "simple" way to do this? I know I could query the tablebefore the update and compare to what the new value is and reactaccordingly.Just wondering if there is something nifty in Sql Server that I ammissing that could help me with this.Thanks in advance for your help.Bill
View 3 Replies View Relatedwe have a table in our ERP database and we copy data from this table into another "stage"Â table on a nightly basis. is there a way to dynamically alter the schema of the stage table when the source table's structure is changed? in other words, if a new column is added to the source table, i would like to add the column to the stage table during the nightly refresh.
View 4 Replies View RelatedIs it possible to check/notify if something (record) has changed in the linked table (from linked server) and automatically update table in local one?
View 4 Replies View RelatedHi,
I am facing the problem with datatype conversions, the scenario is using derived column transformation for add additional columns and then later i am trying to impliment Slowly changing dimensions(SCM) in my job, while mapping the columns at SCM from Input to Output it gave the error like suppose if i am using the numeric(3,0) at SRC system then i converted it into single byte unsigned at derived column and it recognized at SCD but the job fail while run the package it gave the error as task can not able to conversted given data type to target system dtata type.. ifi am not given the single byte unsigned data type at dervied column at the level of SCD mapping the input to output its not accapring this mapping and return the error as can be convert from system.decimal to system.byte..
Sreenivas Amirineni
Hi all,
How can i get the information as to when was the last my particular table structure was changed (for ex. adding of a column/dropping a column)
Pls let me know
TIA
When I create tables in SQL I can specify dbo as the owner using thesyntax below but when using the upsize wizard in Access 2000 I owneverything. Is there a way that the system administrator can changeownership after the fact?CREATE TABLE dbo.mytable (c1 int not null)Thank You,Randy KJoin Bytes!
View 1 Replies View RelatedHa all again.
I have this issue:
I have 2 tables:
t1 (id,field1,field2,field3)
and t2 (id,field_name,field_value)
is possible with trigger to insert only changed fields on t1 to t2 like
(changing field1 on t1 with id 21 cause a new row in t2 with fields id=21,field_name="field1", field_value=field1.value)
i hope you understand what i look for.
Is this trigger solution ?
CREATE TRIGGER MAP_CHANGESON t1AFTER INSERT,UPDATEBEGIN
DECLARE @ID SOMEDATA;DECLARE @FIELD1 SOMEDATA;DECLARE @FIELD2 SOMEDATA;DECLARE @FIELD3 SOMEDATA;SET @ID=(SELECT ID FROM INSERTED)SET @FIELD1=(SELECT FIELD1 FROM INSERTED AS T1,DELETED T2 WHERE T1.ID=T2.ID AND T1.FIELD1<>T2.FIELD1)SET @FIELD2=(SELECT FIELD2 FROM INSERTED AS T1,DELETED T2 WHERE T1.ID=T2.ID AND T1.FIELD2<>T2.FIELD2)SET @FIELD3=(SELECT FIELD1 FROM INSERTED AS T1,DELETED T2 WHERE T1.ID=T2.ID AND T1.FIELD3<>T2.FIELD3)IF @FIELD1<>NULL INSERT INTO T2 (ID,FIELD_NAME,FIELD_VALUE) VALUES (@ID,'FIELD1','@FIELD1')IF @FIELD2<>NULL INSERT INTO T2 (ID,FIELD_NAME,FIELD_VALUE) VALUES (@ID,'FIELD2','@FIELD2')IF @FIELD3<>NULL INSERT INTO T2 (ID,FIELD_NAME,FIELD_VALUE) VALUES (@ID,'FIELD1','@FIELD3')RETURNEND
Hi..
I got 10 Tables with data in it for 100 Loans. The data can be Good and Bad .....
I had a Update Proc which Updates the 10 tables with the Good data what ever i pass...for this 100 Loans
Tha Proc will update the existing data in all tables whether it is Good or Bad Data.
when the updating is completed I want to know what are the Loans that were updated where there is a Bad Data in atleast one Field of the 10tables.
I don't want to check field by field in each table.... if there is a bad data and my proc updated with a Good Data i want to know that Loan.
Can any one has an idea on this,,,,
Thanks
Bob
Hi,
I have a small question regard how to find out if a specific table has chanced.
Is there any (sql)function inside MSSQL2005 that I can use to find if a spesific table has changed? I have heard of timestamp, but I don't know if that will solve my problem? Is there any thing in the sys.tables that kan help me, just do a fast query and check if a table has changed?
I'm developing a web-application with AJAX.NET, and I have UpdatePanels with datalist. When the tables in the db gets big the application is henging for a sec or two when it receiving the data, and when the timer (refresh rate) is 2 min it is not good! So my plan is to check if the table has chanced since last transfer of data, and if it has it will download the data, if not do nothing.
Jonny
sorry i posted this in the tsql forum by accident, here's a repost
I've got a query that I need help with. This is a simplified version of the table I have.
sellerID, orderID, time1, time2, time3, time4
1, 1b1, 11:30 11:35 11:40 11:45
1, 1b2, 11:50 11:55 12:00 12:05
1, 1b3, 12:10 12:15 12:20 12:25
2, 1c1, 11:20 11:25 11:30 11:35
2, 1c2, .... and so on
What I want is a datediff between time4 of the first OrderID to time1 of the next orderID within the same sellerID.
What I want is the following output
sellerID, orderID, timeDif1(time4-time1 of nextrow), timeDif2(time2-time1), TimeDif3(time3-time2), timeDif4(Time4-time3)
1, 1b1, 10mins, 5mins, 5mins, 5mins
Any help would be appreciated!!
THanks
Hi,
I am a newbie with Reporting services and I have a question about matrix using...
So I am using SSRS on an cube with MDX language. I have a matrix like that :
C1 C2 C3
---------------------------
R1 | 10 12 09
R2 | 08 10 23
So I would like to color my best values on a same row. I don't find a function in the expression editor.....
Do you have an idea ?????
I have a table with one column. The values can be Y or N. How do I compare the 2 values and return a result depending on the comparison. For example, if I my column data looks like this.
Y
N
I need to compare them and if they match return a specific value and if they are different return a specific value.
When you setup a subscriber to a publication, that is pull the publication, does it copy all the rows or does it keep track of which rows changed.
View 1 Replies View RelatedI have a history table with the following values
CREATE TABLE History (SnapShotDate DATETIME, UID VARCHAR(10), DUEDATE DATETIME)
INSERT INTO History VALUES ('03-23-2015','PT-01','2015-04-22')
INSERT INTO History VALUES ('03-30-2015','PT-01','2015-04-20')
INSERT INTO History VALUES ('04-06-2015','PT-01','2015-06-30')
[Code] ....
I need an output in the below format. I need the most recent changed value for any given UID. Need to get the below result
OUTPUT
UID PreviousDueDate CurrentDueDate
----------------------------------------
PT-01 2015-04-20 2015-06-30
PT-02 2015-04-22 2015-04-22
PT-03 2015-04-18 2015-04-22
PT-042015-04-222015-04-18
none
View 3 Replies View Related
Is there a Tool/Utility/StoredProcedure/Query/View that can tell me the last time the data in a particular table was changed?
That change can be the result of either an ADD , INSERT, or DELETE statement.
I am using SQL Server 2005.
Hi,I have three columns and want to update the third column based on the comparison of first two columns in the same table.For instance:Col1 - val1, val2, val3, val4, val5......Col2 - NULL, NULL, val1, NULL, val2....Col3 - TRUE, TRUE, FALSE, FALSE, FALSE....Thanks for any help.
View 4 Replies View RelatedHi All,
I have a column in my table like so:
'D4B00 L2A00 L3A00 L6C00 P1C00 L2A28 P4B00 '
How do I check in SQL if any pieces have the first 3 character the same. In the above case, L2A is present twice. I need to do this because I need display disctinct items, therefore L2A needs to be displayed only once.
Any help is appreciated.
Thanks
How to select a column to compare two values in it with AND
Select distinct c.reg#, a.fname, a.lname, to_char(b.L#) as "L"
from employee a, driver b, trip c
where a.e#=b.e#
and b.l#=c.l#
and (c.reg#='PKR3344'AND c.reg#='WWF1155')
order by c.reg#;
error no rows selected..I want c.reg# for the two values inclusive