I have the following time value column in a table:
next_run_time
230000
73000
70000
The above actually translates to 23:00, 7:00AM,7:30AM, etc. How can I convert this into a meaningful time value?
[CODE]
SELECT NEXT_RUN_TIME FROM TABLE T1
[CODE]
Hi, all experts here,
Thanks for your kind attention.
I want to use time series algorithm to mine data from my case table and nested table. Case table is Date table, while nested table is the fact table. E.g, I want to predict the monthly sales amount for different region (I have region table related to the fact table), how can I achieve this?
Thanks a lot and I hope it is clear for your help and I am looking forward to hearing from you shortly.
With best regards,
Yours sincerely,
Hi, all experts here,
Thank you very much for your kind attention.
I am confused on key column of case table and key time column of nested table by using Time Series algorithm.
In my case, the case table structure is as below:
Territory key text (the ID is actually dimrisk_key, in this case, I use the name column binding to combine the Territory column of case table Dimrisks),
While the nested table structure is as below:
Cal_month key time (in this case, actually the ID is dimdate_key, again, I used name column bining property to bind the Cal_month to the ID)
So my question is, as the key column of case table has been set to be Territory, as a result, does the model training still cover all the cases (rows) based on the ID of the table?
Also, in the nested table, as the key time column has been set to Cal_month rather than Dimdate_key of the nested table, as a result, would the single series based on the cal_month?
Hope it is clear for your advices and help.
And I am looking forward to hearing from you shortly.
With best regards,
Yours sincerely,
I want to get a table column name at run time through query. Can any one help me.
ehsan ulhaq dar
I m using SQL Server 2000.
I have Tabel named Topic and have a column name lineage. lineage has data like following:
//////546707//546707//546707/43213/
Now I want to get records who has only one "/" in it's crreponding lineage column.
Can somone tell me how to do that in SQL Server 2000?
Thanks
Khushbu
Hi Frineds
I have a table with contains Text column. and which is accessed by each page of the site. It is getting frequent Dead Lock Any body can suggest me a good solution pl.
Thanks.
MuraliB
I am using DTS to transfer some tables from one server to another as part of a migration. We want to be down for as little time as possible, but we need the most up-to-date copy of the database tables in question.
I am currently testing the transfer process in our test environment by migrating the data from one database to another on the same SQL instance.
There are 7 tables to transfer and the total size of the database is 450 MB (with around 117 MB used). The two largest tables have around 17,000 records each.
One table (the header) has no text column and it takes just a few seconds to transfer. The other table (the detail) has two columns, one of which is a text column (actually, its not fair to call it the detail table; the relationship is actually one-to-one, but for the sake of this discussion, let's leave it at that).
The header takes seconds to transfer, but the detail takes up to 18 minutes.
Physically, our test server is quite robust; 2 processors, a 3 disk RAID-5 for the data files and a separate RAID 1 partition for the logs. Performance counters don't indicate any real issues: during the transfer, the disk utilization on the data partition occasionally spikes to a high level, but comes right back down until the next spike (the spikes being separated by about 1 minute. No issues with memory, paging or CPU.
I have removed the clustered index on the affected table as well as the PK. No help.
Are text columns just slow? Is there something that I am missing?
Regards,
hmscott
I have a column like this:
Table: User
name, field1
Jack 1000|1001|1003
Berg 2000|1001|2004
Paul 1001|1000
Jane 1001
Now, I would like to replace all "1001" with nothing, and also remove the "|"-separator behind 1001 if it exists, basically removing both "1001" and "1001|", so the resulting table looks like this:
name, field1
Jack 1000|1003
Berg 2000|2004
Paul 1000
Jane
My tries, been plenty, but here are some:
Code:
UPDATE UserTable
SET field1 = REPLACE(field1, '1001', '')
UPDATE UserTable
SET field1 = REPLACE(field1, '1001|', '')
But the above queries replaces field1 only if the whole field matches '1001' or '1001|'...
The above queries do work, just like I want them to. I just happened to write them in this order on this post... did not do a copy of the actual query.
I need a script which will tell me Table name and column name where a given text is matching.
Example: search string = "I want to search something"
Output: Table T1 , Column C3.
DB: Microsoft SQL Server 2005 / 2008
Hi,
I am using data flow task to load data with the source as text file to sql server table with identity column.
After mapping all the columns except identity column, when I execute, the package failing saying
it can not insert null value into identity column. I donno how to get around with it ????
Thnaks,
V
Hi All,I am looking for a store procedure or any alternate method which save my html file(s) text (with or without tags) in my table column automatically when I upload my html file to my file system (local hard drive).any help will be appreciate.Thanks in advance.
View 7 Replies View RelatedHow to include a time difference column using 2 other date columns during creation of a table ?
The requirement is to create a table and include the following columns:
1.Downtime start date & time
2.Downtime end date & time
3.Downtime Duration in hh:mm (calculated date difference between column 1 and 2)
I need to update a large table, about 55 million rows, without filling the transaction log, in the shortest time as possible. The goal is to alter the table and change the data type for Text column from VARCHAR(7900) to NVARCHAR(MAX).
Since I cannot do it with an ALTER TABLE statement (it would fill up the transaction log) I'm thinking to:
- rename column Text in Text_OLD
- add Text column of type NVARCHAR(MAX)
- copy values in batches from Text_OLD to Text
The table is defined like:
create table DATATEXT(
rID INTEGER NOT NULL,
sID INTEGER NOT NULL,
pID INTEGER NOT NULL,
cID INTEGER NOT NULL,
err TINYINT NOT NULL,
[Code] ....
I've thought about a stored procedure doing this but how to copy values in batch from Text_OLD to Text.
The code I would start with (doing just this part) is the following, but maybe there are more efficient ways to do it, or at least there's a better way to select @startSeq in the WHILE loop (avoiding to select a bunch of 100000 sequences and later selecting the max).
declare @startSeq timestamp
declare @lastSeq timestamp
select @lastSeq = MAX(sequence) from [DATATEXT] where [Text] is null
select @startSeq = MIN(Sequence) FROM [DATATEXT] where [Text]is null
BEGIN TRANSACTION T1
WHILE @startSeq < @lastSeq
[Code] ....
Working on partitioning a few large tables. One of the tables included a text column and the €śTEXTIMAGE_ON [PRIMARY]€? clause which would prevent the partitioning of this table. After some research we found that the data was legacy and no longer used. We updated the column on the affected rows to NULLS and altered the column to a VARCHAR(20)
When I attempted to run the ALTER TABLE SWITCH I encountered the error
Msg 4947, Level 16, State 1, Line 1
ALTER TABLE SWITCH statement failed. There is no identical index in source table 'LocalDeltanet.dbo.testresultsjoe' for the index 'PKIDX_testSummary' in target table 'LocalDeltanet.dbo.testresults_part'.
After a lot of grief and testing I determined that the message was bogus and the real issue is that the 'sys.tables' still has €ślob_data_space_id€? with a value of 1 for this table.
I created a copy of the table with the text column altered to varchar and one with just the varchar to begin with. After copying data from the original table, I tried to run the alter switch. It failed once again for the text column altered to varchar table, but it worked for the varchar from the start.
Since it appears that this value is causing my issues, is there anyway to update the table in place. I know I can BCP the data out, but that would take too long and would defeat the advantage of using the alter switch method.
BOL States:
The allow updates option is still present in the sp_configure stored procedure, although its functionality is unavailable in Microsoft SQL Server 2005 (the setting has no effect). In SQL Server 2005, direct updates to the system tables are not supported. This means we cannot update the table manually.
Thanks
I have an SSIS package that moves data from SQL Server to an legacy Access database. In SQL Server, there is a date/time column that I need to split into a separate date column and time column in the access database. Initially I just created a derrived column for the time and set the expression equal to the source date/time column from SQL Server. Unfortunately, that just makes the date column and time column the same having the full date/time.
What expression can I use during a derrived column transformation to assign just the date to a derrived column and just the time to another derrived column?
Thanks,
Steve
Hi, all experts here,
Thank you very much for your kind attention.
I am confused on key time column selection. e.g, I want to predict monthly sales amount, then what column in date dimension should I choose to be the key time column? Is it calendar_date (the key of date dimension) column or calendar_month?
Thanks a lot for your kind advices and help and I am looking forward to hearing from you shortly.
With best regards,
Yours sincerely,
How can I calculate a DateTime column by merging values from a Date column and only the time part of a DateTime column?
View 5 Replies View RelatedHi everyone,I encountered an error "Need to run the object to perform this operationCode execution exception: EXCEPTION_ACCESS_VIOLATION" When I try to import data from Oracle to MS SQL Server with EnterpriseManager (version 8.0) using DTS Import/Export Wizard. There are 508 rowsin Oracle table and I did get first 42 rows imported to SQL Server.Anyone knows what does the above error message mean and what causes therest of the row failed importing?Thanks very much in advance!Rene Z.--Posted via http://dbforums.com
View 1 Replies View RelatedHow can I obtain just the time portion from a date/time column?
My data contains "2008-05-19 09:30:00.000"
Actually, all I want/need is the hh:mm part of it.
Thanks,
Walt
I need to take a temporary table that has various times stored in a text field (4:30 pm, 11:00 am, 5:30 pm, etc.), convert it to miltary time then cast it as an integer with an update statement kind of like:
Update myTable set MovieTime = REPLACE(CONVERT(CHAR(5),GETDATE(),108), ':', '')
how this can be done while my temp table is in session?
I have two columns in a table:StartDate DateTime and StartTime DateTime.The StartDate column holds a value such as 07/16/2004The StartTime column holds a value such as 3:00:00 PMI want to be able to add them in a stored procedure.When I use StartDate + StartTime I get a date two days earlier than expected.For example, instead of 7/16/2004 3:00:00 PM StartDate + StartTime returns7/14/2004 3:00:00 PM.Can anyone point out wht I'm doing wrong with this one?Thanks,lq
View 2 Replies View RelatedDear all,
I have 30 tables with the same stracture (01 to 30). One of the fields is duration but has a text data type.
Is there a way to convert the duration field into "Time" date type with format "Long Time" using one query only?
If i have to have one query for each table, can i create a new query or a procedure through a command button that runs all the queries?
Thank you
George
Dear all,
I have 30 tables with the same stracture (01 to 30). One of the fields is duration but has a text data type.
Is there a way to convert the duration field into "Time" date type with format "Long Time" using one query only?
If i have to have one query for each table, can i create a new query or a procedure through a command button that runs all the queries?
Thank you
George
Hi,
I have a table with col_noteText defined as 'Text' datatype column.
I want to search a pattern 'Lawyer' and replace with 'Attorney' in the column col_noteText.
Does anyone know how to do this for 'Text' datatype column.
Thanks in advance.
jfk
Table contains field defined as text. First 12 characters will be date format 'mm/dd/yyyy'. then the next 3 characters could be:
9A, 12P, 3P, 7A or LTL
I would like to convert '9A' to be 09:00AM, so that I can sort by that converted field.
'12P to be 12:00PMÂ Â Â and so on....
I have tried various form of case with substring and convert commands, but cant' get the solution. I can not change text field to varchar in table.
I am using MS SQL Server 2000.
I have 4 text fields
1. event begin date
2. event begin time
3. event end date
4. event end time
I have to find the day and time difference in months days hours and minutes between the event begin date & time and the event end date & time – The event begin date and event end date are char(8) & event begin time and event end time are char(4) – with military time. I would need to combine the event begin date & event begin time to get the event begin date & time and the same for the event end date & time.
If the values of the 4 text fields are
event begin date = ‘20070207’, event begin time = ‘2015’, event end date = ‘20070208’, event end time = ‘0105’, the difference should be 0 month 0 day 4 hours 50 minutes.
Can somebody please help with MS SQL Server 2000 syntax?
Like the title says.. I am trying to import an Excel 2000 spreadsheet to SQL Server to do some manipulations/aggregations. The Excel file has several cells with long text (detailed product descriptions) in them. Since this is a quick Import/Export I am using the Wizard rather than the SSIS Designer. I specify the value of the field as being varchar(max), and this is confirmed by the Edit SQL button. However, every time I try to run it I get an error on the Details column, stating that "Text was truncated". I have tried changing it from varchar(max) to text (and also tried nvarchar(max) and ntext) but still get the same error. What the heck am I doing wrong? I cannot just get rid of the column in question because we need its contents. Is this some issue with Excel and not SQL Server? If so, is there any way to fix it?
View 5 Replies View RelatedFor example,I have a table "authors" with a column "author_name",and it has three value "Anne Ringer,Ann Dull,Johnson White".Here I want to create a new table by using a select sentence,its columns come from the values of the column "author_name".
can you tell me how can I complete this with the SQL?
Hi all, I am not over familiar with SQL, I am a VB programmer, simply I need to achieve the following within Enterprise Manager.
I have 2 tables, different designs, different number of rows, I simply need to check whether the contents of a column in the first table is in a column in the second table, just simply a table/column to table/column data check for the same data content.
Easy Peasy for you guys, any help would be appreciated.
I want to save every query executed from a given software, let's say Multi Script for example, and save in a table query text, execution time and rows count among other possible useful information. Right now I've created a sp and a job that runs every 1 milliseconds but I can't figure out how to get execution time and rows count. Another problem with this is that if the query takes too long I end up with several rows in my table.
View 5 Replies View Relatedfirst sorry my english,
when i execute a query for the first time whith full text service from visual studio, show me the error 'server not responding' and when i execute this query for second time works perfectly.
I have a pivot table that connects to our data warehouse via a PowerPivot connection. Â The data contains a bunch of comment fields that are each between 250 and 500 characters. Â I've set the columns in this pivot table to have the 'Wrap Text' set to true so that the user experience is better, and they can view these comment fields more clearly.
However, whenever I refresh the data, the text wrapping un-sets itself. Â Interestingly, the 'Wrap Text' setting is still enabled, but I have to go and click it, then click it again to actually wrap the text. Â This is very burdensome on the user, and degrading the experience.
Any way to make this text wrapping stick so that I don't have to re-set it every time I refresh the data?
Trying to get the records where the date = today and the time is only
within 15 mintues
So if the time was 10:20 i only get records 2 and 3
COLUMN STAT_DATE
1.2008-06-10T10:30:00.537
2.2008-06-10T10:15:00.530
3.2008-06-10T10:00:00.760