Hi ALL!anyone can help me resolve this problem.I create SQL sentence and using DATEADD to Update DATETIME FIELDand i need Increase 1 Year and Month is 04 and day is 01.example: origin datetime field : 2007/06/26result after update is : 2008/04/01so by DATEADD(yy,1, datefield)?Have any expression for datefield to set month and day like what i need?Thanks .
:eek: Hi, I'm getting problem while using DATEADD Function.
When I use DATEADD(MONTH, 1 '01/31/2005'), it returns 02/28/2005 and when I use DATEADD(MONTH, 1 '02/28/2005'), it returns 03/28/2005 but I want the result as 03/31/2005 ie last day of the month.
hi, can something tell me what function do i need if i want to know what happen the last three hours? for example: dateadd (hh, -3, getdate()) it seems not working?!!
I need help in T-SQL.I am using DATEADD function and I want to add 6 months to a date. Butit does not return me the rusults, which I wante.g. SELECT DATEADD(m,'20040630') returns 20041230which is logical correct? But I want it to return end of month (i.e.20041231)Any help in this context will be highly appreciatedAbdul N. Khan
Problem: I have two nearly identical querys that are running. One of the query's is using the SQL DATEADD function. These query's are running on a SLQ2005 MSDE. There is now service pack four applied to this server. The question is: Are there any known issues with the DATEADD function in SQL 2005? This query is used in a report that has been in use for about two years. There were some changes made to the server (BIOS upgrade) including adding this service pack. These changes did not cause any other SQL issues. This query now takes almost five minutes to run. The nearly identical query (the difference is the date is passed in as a parameter rather than using the DATEADD function) takes from one to two seconds. These reports have a history of nearly identical running time.
What is a good way to try and correct the issue or at least to try and isolate the problem? Have there been any known issues with this function?
I am using the dateadd function to return a recordset. The function seems to allow me to plug variables into parameter2 if its a valid number type, and paramter3 as long as its a valid date type. How ever the function is not allowing me to use a variable into parameter1. I have tried a varchar and all other data types and can't get it to work. Any thoughts?
Hi, I encountered a strange error today. I have an Integer parameter "hours" that I am trying to use in my SQL Query.
DATEADD(hh, @hours, @startTime)
It works if I have it set such as DATEADD(hh, 8, @startTime), but I need that parameter there for what I need.
I get this error:
Error Source: System.Data Error Message: Failed to convert parameter value from Decimal to DateTime. I tried a variety of CInt and other conversion functions to no avail.
Im using the DateAdd Function to establish a future date base on the required time for a series of events to transpire. I'd like to exclude weekends, does anyone know a way to do this?
I created a function to use in a View, works similar to DATEADD but only with my company's Business days Monday-Thursday.
I am running a query but it never ends to run.
This is the function:
USE [RA_dev] GO /****** Object: UserDefinedFunction [Production].[GBDATEADD] Script Date: 4/11/2015 5:58:19 PM ******/ SET ANSI_NULLS ON GO SET QUOTED_IDENTIFIER ON
[Code] ...
This is how I am trying to use it in the View:
Production.GBDATEADD(Production.Schedule.START_DATE, Production.Operations_Data_Pool.MFG_DAY - 1) AS SCH_DATE
I'm trying to return a query based on the dateadd function. I have a column in the database called date_added which is am successfully using the the DATEADD function above as date1. The Var1 variable I need to populate from the database too from a column called life_span which is an int data type. The error I get is An expression of non-boolean type specified in context where a condition is expected near select
My query is as follows: select guid, dateadd(day,life_span,date_added) as datepayday. From User_table
I have events which require certain things be done several days before the event and things be done several days after the event. I attempted to use the DATEADD function to subtract 3 days from the event date. The SQL Statement I created did just that, but, it displays 3 days back from today's date.
There are 2 tables:
CalendarCategories -- Table
CalCategoryID -- int field CalCategoryName -- varchar field
CalendarEvents -- Table
CalCategoryID -- int Field Title -- varchar Field StartDate -- DateTime Field
I have to perform some tasks 3 days before the event. So, TODAY, I want to see a listing of those events which are scheduled for 3 days FROM NOW.
This is my current SQL Statement: SELECT DATEADD(d,-3,StartDate) AS [Update Payoffs & Ins], Title AS [Closing Description] FROM CalendarEvents WHERE datepart(dd,StartDate)=datepart(dd,getdate()) AND datepart(mm,StartDate)=datepart(mm,getdate())
This SQL Statement takes TODAY'S events and gives them a date of February 20. See example of the results at http://www.joelwilliamslaw.com/DesktopDefault.aspx?tabid=141
This is what I have already done relative to my calendar listings:
Specific Event Types for the Current Month :
SELECT StartDate AS [Date and Time], CalCategoryName AS [Cls Type], Title AS [Closing Description] FROM CalendarEvents inner join CalendarCategories on CalendarEvents.CalCategoryID = CalendarCategories.CalCategoryID where (CalendarEvents.CalCategoryID = 1 OR CalendarEvents.CalCategoryID = 2 OR CalendarEvents.CalCategoryID = 3 OR CalendarEvents.CalCategoryID = 4 OR CalendarEvents.CalCategoryID = 20) AND (datepart(mm,StartDate)=datepart(mm,getdate()) AND datepart(yy,StartDate)=datepart(yy,getdate())) AND CalendarEvents.ModuleID = 360 ORDER BY StartDate ASC
Specific Event Types for the Current Day:
SELECT StartDate AS [Date and Time], CalCategoryName AS [Cls Type], Title AS [Closing Description] FROM CalendarEvents inner join CalendarCategories on CalendarEvents.CalCategoryID = CalendarCategories.CalCategoryID where (CalendarEvents.CalCategoryID = 1 OR CalendarEvents.CalCategoryID = 2 OR CalendarEvents.CalCategoryID = 3 OR CalendarEvents.CalCategoryID = 4 OR CalendarEvents.CalCategoryID = 20) AND (datepart(dd,StartDate)=datepart(dd,getdate()) AND datepart(mm,StartDate)=datepart(mm,getdate()) AND datepart(yy,StartDate)=datepart(yy,getdate())) AND CalendarEvents.ModuleID = 360 ORDER BY StartDate ASC
I'm running the following test query on a single table:
SELECT sph.datestamp, sph.stocksymbol, sph.closing, DATENAME(dw, sph.datestamp), CASE DATENAME(dw, sph.datestamp)Â Â Â WHEN 'Monday' then 'Monday'Â Â ELSE (SELECT CAST(sph2.datestamp AS nvarchar) FROM BI_Test.dbo.StockDB AS sph2 WHERE sph2.DateStamp = DATEADD(d, -1, sph.datestamp) AND sph2.StockSymbol = 'NYA')Â END AS TestCase,
[Code] ....
And here's an example of the output I'm getting:
Why the exact same subquery in the THEN of the second CASE statement is returning NULL when the first one completes as expected?
I am trying to generate a @StartDate and @EndDate. The @StartDate would be the 1st of January and the year is dependent on the @EndDate.
The @EndDate would be select max(DateValue) from dbo.testtableThe column DateValue in the testtable contains dates such as 2013-12-09, 2013-12-15.
What I am trying to accomplish is if the @EndDate is populated by select max(DateValue) from dbo.testtable returns '2013-12-15' as the max(DateValue). I want the @StartDate to '2013-01-01' because the year of the EndDate is 2013.
So something along the lines of @StartDate = DateAdd(yy,?,@EndDate)
I have a Stacked Column graph and when we set the Position of the Point Label to be "Top Center", the Point Label always stays in the center of that particular Bar.
On a easier, basic Bar chart, the Point Label setting works correctly.
Has anyone else had a similar issue or know if this is a known issue ?
Hi,Suppose I have a table containing monthly sales figures from my shopbranches:Branch Month Sales-----------------------London Jan 5000London Feb 4500London Mar 5200Cardiff Jan 2900Cardiff Feb 4100Cardiff Mar 3500The question I am trying to ask is this: in which month did each branchachieve its highest sales? So I want a result set something like this:Branch Month----------------London MarCardiff FebI can do a "SELECT Branch, MAX(Sales) FROM MonthlySales GROUP BY Branch" totell me what the highest monthly sales figure was, but I just can't figureout how to write a query to tell me which month corresponded to MAX(Sales).Ideas anyone?Cheers,....Andy
create function func() ( select p1 as Price , m1 as Market, [Price]*[Market] from tableP1, tableM1 }
Now i want to add one column into it whose value is multiple of Price*Market. How can i achieve this. function is not allowing me to do this. I don't want to calculate Price and market again for the third column as while calculating it requires many Case statements.
I finally got my UDF working, but now I'm faced with another problem. I can't seem to use it for anything![:I First, here is the function itself:
CREATE FUNCTION dbo.fnDueDate ( @DOP AS DATETIME, @INTERVAL AS TINYINT, @ThisDate DATETIME ) RETURNS DATETIME BEGIN DECLARE@Temp DATETIME IF @dop <= @ThisDate +(DATEADD(month,1,@dop)) SELECT@Temp = DATEADD(month, @Interval, @dop) ELSE SELECT@Temp = DATEADD(month, (@Interval - DATEDIFF(month, @dop, @ThisDate) % @Interval) % @Interval + DATEDIFF(month, @dop, @ThisDate), @dop) RETURN @Temp END
It is called using something like this SELECT dbo.fnDueDate('20060315', 3, GETDATE())
This function executes(correct term?) with three parameters, DOP, Interval, and ThisDate, which correspond to a column from a table (mytable.dop), an interval in months, and ThisDate (GETDATE())
Now, I have determinied that the function works great, after several posts and a lot of help from our SQLteam gurus/yaks.
However, I can't seem to use it in a stored procedure. Here is some sample data from myTable ResidentsID Last First DOP 1 Jones Bridget 09/08/2004 2 Longstocking Pippi 08/01/2006 etc.
What I would like to do is generate this: Last First DOP Next3month Next6Month Jones Bridget 09/08/2004 12/08/2006 3/08/2006 Longstocking Pippi 08/01/2006 11/01/2006 5/01/2006
Trying to get a dataset. My select statement is "SELECT Com_year,Avg(GPA) FROM Pilot_Stats WHERE com_source = 0 GROUP BY Pilot_Stats.com_year ORDER BY Pilot_Stats.com_year"
Where Com_Year is an integer (ie 1984, 1986, etc) Where GPA is a decimal (ie 3.4, 3.0, etc) Where com_source is an integer
This returns this error when I try to fill the dataset:
Decimal byte array constructor requires an array of length four containing valid decimal bytes.
For some reason it's hanging up on Averaging this Decimal column for some reason...
Just want to double check this.To add 30 days to the current date in a stored procedure using SQL Server should be this: DATEADD(day, 30, GETDATE())Right?Thanks,Zath
I am trying to calcuate the finalsuit date for every 2 years becasue that when employees have to get their gaming license renewed, so I'm trying to add the renewal year by 2 because they have to get it done every two years
If I am running a scheduled job at the first of the month and I want to run an update sequence for the previous month, i was essentially using this sql:
What is the correct format for getting the last three months of data. in sql its DATEADD(mm-3,getdate()) but for some reason the report doesnt want to take this? what am i doing wrong?
I am using Derived Column Transformation Task to format my data as I am converting my DTS to SSIS. One of the columns requires to use DATEADD where I add 1 month and substruct one day from the date that I get in the flat file.(note that I always hardcode the day to "01" regardless of what I get in my flat file)
in managed code I get the right answer 11/1/2006. Between 1753 and 2007, there should have been 2007 - 1753 = 254 yrs x approx 365 = 92,710 days. Where is the year 2153 coming from?
I would like to make the column heading to be the current year for the Sales I'm adding below.
SELECT dbo.QIVSalesMTDYTDCustSalesPerson.slspsn_no,dbo.arslmfil_SQL.slspsn_name, SUM(CASE WHEN year(getdate()) = qivsalesmtdytdcustsalesperson.year THEN Sales END) AS convert(varchar(4),year(getdate())) FROM dbo.QIVSalesMTDYTDCustSalesPerson INNER JOIN dbo.arslmfil_SQL ON dbo.QIVSalesMTDYTDCustSalesPerson.slspsn_no = dbo.arslmfil_SQL.humres_id GROUP BY dbo.QIVSalesMTDYTDCustSalesPerson.slspsn_no, dbo.arslmfil_SQL.slspsn_name
What I have now gives me incorrect syntax near keyword convert.
I had an issue that I ran across that I got solved but it was very monotonous. Here is my issue: I have an SQL function that takes in 2 parameters (lookup category and lookup code) and with those parameters is goes out and find the lookup code description. I have this function in about 40 computed columns. It isn€™t the best way to do things but we need it for some legacy stuff. The problem occurs when I need to make a change to that function. I can€™t because it is being reference by all of the tables. So what I have to do is go in to each of the tables and remove the function from the column formula. Then change the function and then finally add that function back to the column.
Here is what I did. I went to the syscolumn table to find all of the computer columns. I went to each of those columns and removed the formula and added it to a text document. Then I changed the function. I then wrote a stored procedure that would add the column back. ( I couldn't find a way to use the ALTER COLUMN to add the function so I had to drop and then add the column )
Here are the possible scenarios that I want to see if they are possible. 1) Somehow €œturn off€? the dependency between the function and the column. That way I can just update the function. OR 2) Programmatically grab the data from the column formula and write that some place and clear out the formula. Then update the function. Then finally take all of the data that was cleared out and write it back to the column.