Combination Chart With Time Axis In Report Services
Mar 17, 2008
Hi
please excuse my ignorance but if someone could point me in the right direction i would be grateful.
i have produce a chart with some data against date points on x axis. i have another date field which i want to combine with the orignal date axis is this possible .
ie
table
results planned date Acutual date
10 02/03/07 01/03/07
46 03/03/07 03/03/07
60 06/03/07 07/03/07
i want to combine the planned date and actual date as an x axis
I have a bubble chart created with Report Builder 3.0. I have the Y-axis series is along the left side of the chart. When all X values are positive, everything displays normally. However, if any X-axis values are negative, the whole graph shifts slightly leftward and the Y-axis title is no longer visible. It seems to be overwritten by the shifted graph or simply pushed into nondisplay area.
Is there something I can do to make the chart stay put?
Is changing the display format of the Y axis of a column chart supported in the Sept CTP or is it going to be supported in the official release? For example I have built a report model with the numeric sales values set as 'C' for currency and have created a simple bar chart with year on the category axis and sales on the Y axis. The problem is that the Y axis displays as a general number (10000000) and would like to display it as a currency ($10,000,000). I can't for the life of me figure out how to display the Y axis as currency in Report Builder.
I have a chart that I am grouping data by Year, Month, day then Hour (this is to view server performance data) - however i need the label for the hour grouping to be in the format of HH:MM and not H:M by using expression
I have a simple-column chart and in the x-axis I put the date values and in the y-axis the sale price values.
The chart works perfectly in the case when there is only one sale price for the same date. But, when the price changes during the same day, then there is problem. In the following example
x y
1/1/2007 6.25
2/1/2007 7
2/1/2007 4
3/1/2007 8
the chart will have three columns and in the date 2/1/2007 will display the min or max of the two values. What I need is to represent all the values i.e. the chart must have four columns , as much as the rows of the dataset
What is the best optimised options to display the date labels with bi-weekly intervals starting date Date from one month to three months future from the current date?
As per above requirements, I have built the below line graph query and graph, currently it only displays the date labels as per data but I need to display date labels with bi-weekly intervals starting date from one month to three months future from the current date. Also another issue found, if there are few more date labels then does not show all labels on horizontal axis.
Select /* Set Week End date as Sunday */ DATEADD(DAY, 7 - DATEPART(WEEKDAY, t.TaskBaseline0FinishDate), CAST(t.TaskBaseline0FinishDate +1 AS DATE)) as[WeekEnd] ,count(t.TaskBaseline0FinishDate) as Baseline ,count(t.TaskFinishDate) as Finish
I have created range bar chart and I am not able to achieve the following tasks.
1. Change X-axis Label Format to Quarter:
I have x-axis with dates and y axis of project groups. I have changed x-axis interval type = month and interval=3. Â Â Set the Maximum = Â Max(ProjectEndDate) and Minimum = Min(ProjectStartDate).
Now my chart showing 3 months x-axis interval dates in mm/dd/yyyy format. I want to change this interval date format to Quarter. The problem is LabelsFormat property is not recognize  the "=Q or q or quarter" and also not accepting the expressions. How can I achieve this?
2. Placing series side by side when it is not overlapping
I want to place the same group series side by side only when the previous project end date is less than next project start date, otherwise place the next project to next row. How can I achieve this?
When I export the report in excel format the chart is displayed as picture. I want it to be displayed as editable chart.Does Office Writer work in this situation and did anyone use Office Writer to accomplish same type of problem.Is there any other method or product we can use instead of the office writer.
I have created a matrix report having  "Probability"  in Row and "Impact" in Column  and "Risk ID" in Data Part .
Now the problem which I am facing is I need to fill matrix with different color value based on combination of Probability and Impact.
I am able to write the expression in "Fill" area of "Risk_ID" text box but the problem is only those text box gets colored which are having Risk-Id value in it like shown below.I want all text box to be colored even if no Risk_Id is there in any text box.
I am trying writing the correct logic so that all text box gets colored even if there is no Risk _Id in it.
I'm trying to convert an old chart to Reporting Services. We have used the same dataset for years, it is very very simple. But it seems to me that Reporting Services can't deal with this simple dataset.
My question is: How can I get create a line chart using this dataset.
The data set consists of 1 row with 96 columns (a day divided into 96 sets of 15 minutes). Each column records how many events occurs within the 15 minutes. Along the x axis I would like to display a vertical line every 4 hours. The y axis should be numbered 0 to the highest value in the results.
I could not make this dataset any more simple than it is. But Reporting Services just chokes on this.
Here is a sample of the dataset : 1 2 0 4 5 6 7 8 9 10... 96
I created a graph which retrieves value from database.And currently,my axis is in ranged 0-10.But i have a doubt that my value in will exceed my maximum y-axis value 10..My question is, could it be possible that i make my y-axis dynamic??Thanks!!
Friends, I would like to put employee name and type of leave on the y-axis and on the x-axis the date, so that users can select the date start and end and employee/employees and see the chart or leaves. But how to do that? My fields are: Name, LeaveDescription and Date. The data with me is for each employee, for each date, leave codes are there.
I have a report where i am using line chart with date column for grouping. For X axis i have choosen the "NUmeric or Timescale Values". In the Chart the dates are displayed in this format 1/1/2007 12:00:00 AM . I don't want Time part to be shown
If possible i want it to be shown as 1-Jan. The Chart should display Point even when there is no record returned from the query.
Say DATE Column
Date AMOUNT 1/1/2007 12:00:00 AM 10 1/3/2007 12:00:00 AM 20 1/4/2007 12:00:00 AM 30
Now the Chart should plot from 1/1/2007 to 1/4/2007 including 1/2/2007
I have a pivot chart that displays 3 data series.Series 1 values range from 17 to 106.Series 2 values range from 1 to 18.Series 3 values range from 0 to 1.When I display all three series on the chart, the value axis labels run from1 to 120 with major unit lines at intervals of 20.When I remove Series 1, the chart automatically adjusts itself and thevalue axis labels run from 1 to 20 with lines at intervals of 2, thusnicely accommodating the value ranges of Series 1 and Series 2.All this is fine. But when I remove Series 2, leaving only Series 3,the labels run from 1 to 1.2 with interval spacing of .2. Since thesevalues are counts, it makes little sense to show decimal values.Can anyone provide advice on how to keep these axis labels fromshowing decimal values, if a user removes Series 1 and Series 2?Thanks.- Bob
I have a chart on a report that shows value in £ on the Y Axis. The values can be both positive and negative. I would like to have the negative labels to show in red and the positive in black. What is the expression syntax to achieve this? i know it will be an IIF statement, but what is the syntax to show the Y Axis label as <0?
eg if i was doing this for a field it would be iif(Field!Fieldname.value <0, "RED","BLACK") but what would i replace the FIELD!Fieldname.vaue with so the expression would change the Y Axis label.
I have a chart that I am grouping data by Year, Month, day then Hour (this is to view server performance data) - however i need the label for the hour grouping to be in the format of HH:MM and not H:M by using expression
I am using Sql REporting Services 2005 for viewing reports in my web application. I have to change the chart types at run time basesd on the option. User can select any chart eg. bar chart, pie chart, column chart etc. On selection screen should populate the chart type. I am not able to change chart type at runtime. Help please.
I am using sql reporting services 2005 for viewing my reports, Now i want to change chart type of my report according to diffrent selection, there will be pie chart, coulmn chart , bar chart or many more options resides in my web application and according to user selection , chart of that report should be change.
The values on X-axis are scaled from -100 to +100. I want to colour the band from -100 to 0 with red colour and that from 0 to +100 in green colour, and i want to provide legend for these bands/sections. How can i do this?
Hello, I need to know what means are available to change the Minimum and Maximum Y-Axis scale values rather than leave them simply as they are in the properties. Right now whatever min/max values I enter into the scale for the Y-Axis are unchangeable. I need to be able to change the min/max scale values based on the value of the data at run time.
I have created an SSRS report containing a bar chart. The Y-axis contains some application names which are displayed based on a certain criteria. Hence sometimes there are only 2 values in y-axis while sometimes it may range upto 20 items. I have tried a lot but have been unsuccessful in getting a dynamic y-axis which changes with the number of items present.
I have an stacked chart with line with markers. The scale on the right side is the finished good which has a min qty of 383 while the highest is 52439. how can i set this scale that start from 0 to 300 and soon. right now under scale properties I set the max to 60000, the min is set to auto while in the interval properties i set this to 10000. How this line marker adjust the scale quantity (fisnished good).
Is it possible to have different chart (having their dataset from same shared datasets) like six on one report, then secondly can they all respond to same parameter filter.