I want to do something like this.
Code SnippetSELECT * FROM [scholarship] WHERE ([schlrPrefix] + ' ' + [schlrName] AS ScholarshipName) LIKE 'Ann Buttler'
How do I something like this where it combines two fields and then use that to compare to a parameter?
I have two fields that I would like to combine into 1 field is this possible.
Example: Document # 555, Doc Description ABCD in the 3 field I would like 555-ABCD.
Is that possible in SQL Server thanks
I have 3 fields: DOB_DAY (ex: 15), DOB_MO (ex: 8), and DOB_YEAR (ex: 1975). I have a blank field named BIRTH_DATE.
What would be the SQL to set the BIRTH_DATE field to be equal to the Day, Month, and Year field. I need it in "DateTime" format.
Thanks
Hi there!
I have a table with three columns: Id, Name and Departament. (ex: 23, "Mary", "Check-out")
I'd like to write a SQL Select clause so that the three columns are combined in just one column (ex: "23 - Mary - Check-out")
Is it possible? Many thanks for any kind of help.
I want to combine three fields together as a description in a select statement. When I try using the & or + I'm told that the datatypes are incompatable. How can I join them?
(Item_Description is Nvarchar, Item_Cost is Money, Is_Active is bit)
Select Item_Description &' '& Item_Cost &' '& Is_Active As Description FROM tblItemList I tried Casting this but same incompatable message.
Select Item_Description &' '& CAST(Item_Cost AS NVARCHAR) &' '& CAST(Is_Active AS NVARCHAR) As Description FROM tblItemList
What I'm hoping to end up with is:
Brake Pedal, $36.00, True
Hello everyone -
This is my first post to the forum and I'm very new to SQL. I apologize if this is addressed elsewhere.
Here is an example of the results I am getting from my query
AdmissionID, sNurseInit, sSWInit
100, {NULL}, SAE
100, REG , {Null}
Is there a way to combine (merge, join? I don't know the right word) these records so that a single record for the admission is returned?
AdmissionID, sNurseInit, sSWInit
100, REG, SAE
Thanks in advance!
Amy
Hello to All,
I needs help to combine these together but how would I eliminate necessarily zero in front of "PropertyHouseNumber".
Table: DirectHome
Column fields.......
PropertyHouseNumber, PropertyStreetDirection, PropertyStreetName, PropertyMODE
0000001091 , W , 000026TH , RD
Thank you
RV
Hi all
I have a table with one nText Field , some times i need to realize whether two records have the same value in that nText Field or not , so how can i compare
these two records based on their ntext Fields.? in the other words i'm looking for some thing like the follows:
declare @a nTextdeclare @b nText
select @a=MynTextField from MyTable where PK=18select @b=MynTextField from MyTable where PK=21
if @a=@b print 'Records Are the same'else print 'Record are not the same'
Thanks in advance.
Regards.
I need to build a cube for membership over time. Active membership is the gap from the record's CreationDate to SuspendedDate, as compared to a reference date (today's active members have CreationDates before today, and SuspendedDates > today, or NULL).
Any idea how to build a cube so I can count membership over a Time dimension? The only approach I've been able to come up with is to create a table with a record for each active member on each date (brute force).
AtDhVaAnNkCsE!
I am working with the article that MAK wrote on SecurityLogs http://www.databasejournal.com/features/mssql/article.php/3515886
I have completed this, but I have made some changes to the database (for normalization to 3NF purposes). I now have problems with a query.
I am trying to "Insert a new record in a table if it does not already exist in the table". To try to clarify I perform the following query:
INSERT INTO Tmp_Event
SELECT DISTINCT EventID, EventType, EventTypeName from Tmp
Which gives me the Tmp_Event table consisting of EventID's etc. (no duplicates). What I then want to do, is compare the 'Tmp_event' table and an already existing 'Event' table. These two tables are in fact identical. I would like to insert any records from 'Tmp_Event' into 'Event' if they do not already exist in 'Event'.
This query gives me all records that do not exist in 'Event'
SELECT EventID, EventType, EventTYpeName from Tmp_Event
WHERE EventID NOT IN (SELECT EventID from Event)
How can I change this query into performing an INSERT INTO Event as well?
Hope this makes sense :)
-Silia
I would like to compare 2 fields.. One of which is generated by the application upon insert. The other which is today's date.
In other words I want all records with today's date.
Problem is I get no results because I'm also apparently comparing the time.
Do I use a CONVERT function on my select & GETDATE outputs?
Thanks,
Kelly
I have a table with a DateTime field that has Dates in the format of mm/dd/yyyy I want to do a simple count on the table for the previous day but keep getting 0 for the results. Here is the script I've been trying.
SELECT COUNT(*)
FROM mytbl
WHERE Collected_Date = DateAdd (dd, -1, GetDate())
It appears to me that the time portion of the DateAdd function keeps the matches that I am looking for from happening. What am I missing or am I going about this all wrong?
Thanks for any help
I have two name columns in my table, NAME1 & NAME2 that I want to compare to see if they match. Only problem is that the order of the first, last, middle name can be either same or different between the two fields.
For example
NAME1 = JAY JOHN SMITH
NAME2 = JOHN SMITH JAY or SMITH JOHN JAY
Is there a way to somehow reorder these fields and then compare using SQL?
Is it possible to combine fields and text in a select statement?
In a dropDownList I want to show a combination of two different fields, and have the value of the selected item come from a third field. So, I thought I could maybe do something like this:
SELECT DISTINCT GRP AS GroupName, "Year: " + YEAR + "Grade: " + GRD AS ShowMe
FROM GE_Data
WHERE (DIST = @DIST)
I hoped that would take the values in YEAR and GRD and concatenate them with the other text. Then my dropDownList could show the ShowMe value and have the GroupName as the value it passes on. However, when I test this in the VS Query Builder, it says that Year and Grade are unknown column names and changes the double-quotes to square brackets.
If this is possible, or there's a better way to do it, I'd love some more info.
Thanks!
-Mathminded
The following query gets all the data I need except for one new field that I need which combines multiple fields and some text. Here is the query:
SELECT [Make Mods-Additions HERE].StockNumber AS ProductID, [Make Mods-Additions HERE].[Long Description], [Make Mods-Additions HERE].[Short Description], [Make Mods-Additions HERE].NEWwholeEachCost AS [Wholesale Each], [Make Mods-Additions HERE].Units, [Make Mods-Additions HERE].[Sale/CameoPrice] AS [Case Price], [Make Mods-Additions HERE].MinQty, [Make Mods-Additions HERE].Multiples, [Make Mods-Additions HERE].UPC, [Make Mods-Additions HERE].MSRP, [Make Mods-Additions HERE].[Availability Date], [Make Mods-Additions HERE].[Item Description (Detailed)] AS [Full Item Description]
FROM [Make Mods-Additions HERE]
WHERE ((([Make Mods-Additions HERE].Active)="YES"));
I need one more field named 'Rep Order Description' that concatenates the following:
[Short Description], "-$", [Wholesale Each], " ea, MSRP $', [MSRP]
It is important that the [Wholesale Each] and [MSRP] values are in 0.00 format (they are currency)
Example of output:
Short Description-$0.00 ea, MSRP $0.00
My situation is this: I have a requirement table,in the requirement table i have a field which is allow_multiple,if it allows multiple the value is 1 and 0 if it will not allow and also I have an insert storedprocedure for inserting licenses which will be added in the Staffl table.When i insert a new license for the staff,it should check in the requirement table if the new inserted lincense does have 0 or 1 value in the allow multiple field.If it has a value of 0 the new license should not be inserted.What would be the good way to compare the existing licenses of the staff and the newluy added?
Funnyfrog
I want to combine two of my fields somewhat like when you combine to char fields and concatenate them. But these two fields are int. How do i do that? Here's my query right now:
Code Block
SELECT AutoID,
CONVERT(Varchar(Mars_Calender_Year )+ CONVERT(Varchar(Mars_Calender_Period_Code) as MarsId
FROM NavisionReplication.dbo.Tbl_Mars_Calender
ORDER BY Mars_Calender_Year DESC
what am i doing wrong?
Good morning.I am importing an XLS file into one of my tables. The fields are:Date Id Time IO12/22/2006 2 12:48:45 PM 912/22/2006 16 5:40:55 AM 112/22/2006 16 12:03:59 PM 2When I do the import, I get the following:Date Id Time IO12/22/2006 12:00:00AM 2 12/30/1899 12:48:45 PM 212/22/2006 12:00:00AM 16 12/30/1899 5:40:55 AM 112/22/2006 12:00:00AM 16 12/30/1899 12:03:59 PM 2Here are my doubts:1. Would it be better to combine the Date & Time fields into onecolumn? If so, how?2. What issues or problems might I have when I program SQL reports, ifI leave the fields as they are?Any comments or suggestions will be very much welcomed.Cheers mates.
View 2 Replies View RelatedGood morning.
I am importing an XLS file into one of my tables. The fields are:
Date Id Time IO
12/22/2006
2
12:48:45 PM
9
12/22/2006
16
5:40:55 AM
1
12/22/2006
16
12:03:59 PM
2
When I do the import, I get the following:
Date Id Time IO
12/22/2006 12:00:00AM 2 12/30/1899 12:48:45 PM 2
12/22/2006 12:00:00AM 16 12/30/1899 5:40:55 AM 1
12/22/2006 12:00:00AM 16 12/30/1899 12:03:59 PM 2
Here are my doubts:
1. Is it be better to combine the Date & Time fields into one column? Advantages/Disadvantages?
2. If I don't combine them, should I use varchar or datetime data type?
2. What issues or problems might I have when I program SQL reports, if I leave the fields as they are?
Any comments or suggestions will be very much welcomed.
Cheers mates.
I have the following table structure.group1 group2 group1_result group2_result'One' 'Two' 3 2'One' 'Two' 3 1'One' 'Two' 2 5'One' 'Two' 4 1'One' 'Two' 0 5I need to sum up the number of times 'One' is greater than 'Two', andvice-versa. For example, the result I would like to achieve is asfollows.group1 group2 group1_total group2_total'One' 'Two' 3 2I'm using the following SQL statement, but I get 5 rows returned,giving me a '1' or '0' for each row.select group1, group2,sum(CASE WHEN group1_result > group2_result THEN 1 ELSE 0 END),sum(CASE WHEN group2_result > group12_result THEN 1 ELSE 0 END)FROM table1GROUP BY group1, group2Any help would be greatly appreciated.
View 1 Replies View Related
I have just started using SQL Server reporting services and am stuck with creating subreports.
I have a added a sub report to the main report. When I right click on the sub report, go to properties -> Parameters, and click on the dropdown for Parameter Value, I see all Sum and Count fields but not the data fields.
For example, In the dropdownlist for the Parameter value, I see Sum(Fields!TASK_ID.Value, "AppTest"), Count(Fields!TASK_NAME.Value, "CammpTest") but not Fields!TASK_NAME.Value, Fields!TASK_ID.Value which are the fields retrieved from the dataset assigned to the subreport.
When I manually change the parameter value to Fields!TASK_ID.Value, and try to preview the report, I get Error: Subreport could not be shown. I have no idea what the underlying issue is but am guessing that it's because the field - Fields!TASK_ID.Value is not in the dropdown but am trying to link the main report and sub report with this field.
Am I missing something here? Any help is appreciated.
Thanks,
Sirisha
How can I create a Table whose one field will be 'tableid INT IDENTITY(1,1)' and other fields will be the fields from the table "ashu".
can this be possible in SQL Server without explicitly writing the"ashu" table's fields name.
sir
I have got this error message to establish connction with recordset vb .net, Can you please rectify this
Too many arguments to 'Public Overridable ReadOnly Default Property Fields() As ADODB.Fields'
my code like this
rs = New ADODB.Recordset
rs.Open("Select * from UserLogin where userid='" & txtUserName.Text & "'", gstrDB, DB.CursorTypeEnum.adOpenStatic)
If txtUserName.Text = rs.Fields.Append(userid) Then
MsgBox("OK", MsgBoxStyle.OKOnly, "Confirmation")
End If
thanks
Hello !I'm trying to update one table field with another table searched firstdate record.getting some problem.If anyone have experience similar thing or have any idea about it,please guide.Sample case is given below.Thanks in adv.T.S.Negi--Sample caseDROP TABLE TEST1DROP TABLE TEST2CREATE TABLE TEST1(CUST_CD VARCHAR(10),BOOKING_DATE DATETIME,BOOKPHONE_NO VARCHAR(10))CREATE TABLE TEST2(CUST_CD VARCHAR(10),ENTRY_DATE DATETIME,FIRSTPHONE_NO VARCHAR(10))DELETE FROM TEST1INSERT INTO TEST1 VALUES('C1',GETDATE()+5,'11111111')INSERT INTO TEST1 VALUES('C1',GETDATE()+10,'22222222')INSERT INTO TEST1 VALUES('C1',GETDATE()+15,'44444444')INSERT INTO TEST1 VALUES('C1',GETDATE()+16,'33333333')DELETE FROM TEST2INSERT INTO TEST2 VALUES('C1',GETDATE(),'')INSERT INTO TEST2 VALUES('C1',GETDATE()+2,'')INSERT INTO TEST2 VALUES('C1',GETDATE()+11,'')INSERT INTO TEST2 VALUES('C1',GETDATE()+12,'')--SELECT * FROM TEST1--SELECT * FROM TEST2/*Sample dataTEST1CUST_CD BOOKING_DATE BOOKPHONE_NOC12005-04-08 21:46:47.78011111111C12005-04-13 21:46:47.78022222222C12005-04-18 21:46:47.78044444444C12005-04-19 21:46:47.78033333333TEST2CUST_CD ENTRY_DATE FIRSTPHONE_NOC12005-04-03 21:46:47.800C12005-04-05 21:46:47.800C12005-04-14 21:46:47.800C12005-04-15 21:46:47.800DESIRED RESULTCUST_CD ENTRY_DATE FIRSTPHONE_NOC12005-04-03 21:46:47.80011111111C12005-04-05 21:46:47.80011111111C12005-04-14 21:46:47.80044444444C12005-04-15 21:46:47.80044444444*/
View 3 Replies View RelatedI am using MS SQL 2012. I have a table that contains all the data that I need, but I need to summarize the data and also add up decimal fields while at it. Then I need a total of those added decimal fields. My data is like this:
I have Providers, a unique ID that Providers will have multiples of, and then decimal fields. Here are my fields:
ID, provider_name, uniq_id, total_spent, total_earned
Here is sample data:
1, Harbor, A07B8, 500.00, 1200.00
2, Harbor, A07B8, 400.00, 800.00
3, Harbor, B01C8, 600.00, 700.00
4, Harbor, B01C8, 300.00, 1100,00
5, LifeLine, L01D8, 700.00, 1300.00
6, LifeLine, L01D8, 200.00, 800.00
I need the results to be just 3 lines:
Harbor, A07B8, 900.00, 2000.00
Harbor, B01C8, 900.00, 1800.00
LifeLine, L01D8, 900.00, 2100.00
But then I would need the totals for the Provider, so:
Harbor, 1800.00, 3800.00
I would like to search a table for a phrase, or for a partial phrase,eg on table product - for name or description, or name + descprition.How does one say select * from product where name + description like%phrase%or contains phraseCurrently I can get where name, or where descriotion like %phrase%,eg, where name like krups, or where description like coffee makerBut if I search for where name like %krups coffee maker% i get noresults. krups is in the name field, coffee maker is in thedescription field.Thanks,-M
View 1 Replies View RelatedPardon me if this question is too elementary. I am trying to create a trigger that will cause certain datafields to be updated with values from other data fields in the same row when a certain column, created specifically to fire the trigger, is updated. The purpose of this is to reduce data entry by field personnel.I think I have the create trigger statement correct, but I'm a little confused on the update statement.
In a nutshell, how can I write something like:
UPDATE "TABLENAME"
SET DATAFIELD1 = DATAFIELD2
WHERE RECORDNUMBER = (THE SAME RECORD NUMBER)
I do know that I have to ensure that sp_dboption Recursive Triggers value is set to false, thanks.
I have a list of items in one table and a field (pageName) in another table that may contain one of the aforementioned items somewhere within that field. There is no fixed position within the field where the itemNo may be so I can't just use SUBSTRING(pageName,2,5) in(select itemNo from tblItem).
Logically, it's like I need to combine IN and LIKE: select pageName where pageName LIKE IN %select itemNo from tblitemNo%..LIKE can only handle one comparison string.
Hi people
My users are having troubles with link to default drillthrough report when reports are exported to excel (they REALLY don't like this behavior ), so I decided set all of them disabled in report model, this work fine, but calculated field in reports has this drillthrough link.
Let me show you the situation. Entity Product has an UnitaryCost field, I set the EnableDrillthrough Property in False so when I export a report with this field, no link is shown.
But if I create in the report a calculated field Round(UnitaryCost) this field has a Drillthrough Link
Is this the standard and expected behavior? or its simply a BUG?
Have I done something wrong in my model? and in this case, How I can correct this?
regards.
Julio Diaz.
I can use the IN with the WHERE clause as example:SELECT * FROM NORTHWIND WHERE LASTNAME IN ('FULLER','KING')I want to use the IN and LIKE at the same time:SELECT * FROM NORTHWIND WHERE LASTNAME LIKE ('A%','B%')I know this is a simplistic example, but the members for the IN will bemany, 5 to 10.I'm trying to avoid:SELECT * FROM NORTHWIND WHERE LASTNAME LIKE 'A%' OR LASTNAME LIKE 'B%'OR LASTNAME LIKE 'FU%' OR LASTNAME LIKE 'JON%' <...>and so forth.Any Ideas?TIARob
View 3 Replies View RelatedHai All,
Could some one help me how to combine IN & LIKE in the query selection,
i'v try many syntac and i just have no find the way out
this is what I would like to write:
Select DSCRIPTN,ORMSTRID,ACTINDX
from T50001
where ACTINDX = 350
and DSCRIPTN Like in '%'+(select distinct rtrim(ORMSTRID) ORMSTRID from L10001)+'%'
Hi all,
I have a table with multiple rows with the same ID.
a) How do I combine all columns into one row with the same ID?
b) Is this better to do the combine in the store procedure/trigger or a sub that involked by some sort of datarepeater, datagrid controls?
Since I am trying to brush up my sql. I appreciate any examples on top of conceptual solution.
Thanks
Combine 3 Databases, Not tables.
Let me spell this out -- I have 3 databases (they are in isolation when in use, its a field app) that need to be merged into 1 "masterDB" database. I've discovered I can use something like this to get to each DB in a query...
1 USE [database1]2 SELECT table1.Name, table1.Location, table1.Date, table2.Blog3 FROM table2 INNER JOIN4 table1 ON table2.ID = table1.ID5 ORDER BY table1.Date
and then just repeat for database2 and database3. Ok, fine, rah rah. My question is how do I "merge" all of these into 1. No data on each db will be identical, at all, ever so that is not a concern. I just need all the data from db1, 2 and 3 into masterDB.
Ideas? Direction?