Combining Multiple Results Into One Row
Mar 6, 2006
Hey guys, here is my issue, i'm trying to combine multiple columns of data into one row. For example, I have a temp table:
create table #Custom_Address
( patient_idchar(10)null,
episode_idchar(3)null,
custom_address varchar(100) null
)
As you can tell, the 'custom_address' column is going to house the results of the combination.
I am trying to INSERT (combine) using this statement:
INSERT #Custom_Address
select cm.patient_id, cm.episode_id, (cc.coverage_plan_add1 +' ' + coverage_plan_add2 + ' ' + coverage_plan_city+ ' ' + coverage_plan_st+ ' ' + coverage_plan_zip) as custom_address
FROM #ClaimMaster cm join Coverage_Custom cc on cm.patient_id = cc.patient_id and cm.episode_id = cc.episode_id
WHEREcc.coverage_plan_add1 > 0
OR cc.coverage_plan_add2 > 0
OR cc.coverage_plan_city > 0
OR cc.coverage_plan_st > 0
OR cc.coverage_plan_zip > 0
GROUP BY cm.patient_id, cm.episode_id
I want to insert the patient_id, episode_id, and then combine the 'cc.coverage_plan_add1 +' ' + coverage_plan_add2 + ' ' + coverage_plan_city+ ' ' + coverage_plan_st+ ' ' + coverage_plan_zip' data to represent my "custom_address" column and only when there is data in those columns.
Then I do my update:
UPDATE#ClaimMaster
SET #ClaimMaster.custom_address = ca.custom_address
FROM #ClaimMaster
JOIN#Custom_Address ca on #ClaimMaster.patient_id = ca.patient_id and #ClaimMaster.episode_id = ca.episode_id
However, when I do this, it says my 'cc.coverage_plan_add1 + etc' columns are invalid because they are not contained in either an aggregate function or a GROUP By clause.
If i'm combining all the data to represent a single column, how do I format my group by clause? Or is my entire INSERT statement wrong?
As a side note, my #ClaimMaster table is another temp table, but the problem is not in there.
View 5 Replies
ADVERTISEMENT
Jul 17, 2013
I have a table of attributes set up as follows:
ID, Value, Group
1, Football, Sports
1, Baseball, Sports
1, Basketball, Sports
2, Baseball, Sports
3, Football, Sports
1, Lambda Sigma, Greeks
2, Delta Delta, Greeks
etc.
I want a query that will combine that values for each ID into one field per group. So if ID 1 has multiple sports but also a greek attribute, they end up with two rows; the first row containing the combined sports values and the second row the greek valued not combined, because there was only one value in that group for that ID. For example:
ID, Combined Values, Group
1, Football Baseball Basketball, Sports
2, Baseball, Sports
3, Football, Sports
1, Lambda Sigma, Greeks
2, Delta Delta, Greeks
View 5 Replies
View Related
Oct 22, 2007
Hi all,
I need some help in combining two results. I am using the Northwind Database and the Orders Table. The first select outputs the table shown below, Table 1 and the second select outputs the result in the second table Table 2. How can I combine these two to get the third table, Table 3 ?
SELECT TOP 100 PERCENT EmployeeID, COUNT(ShipVia) AS CountShipVia1
FROM dbo.Orders
WHERE (ShipVia = 1)
GROUP BY EmployeeID
ORDER BY EmployeeID
Table 1 Results
EmployeeID CountShipVia1
1
82
2
71
3
81
4
116
5
29
6
48
7
44
8
75
9
29
SELECT TOP 100 PERCENT EmployeeID, COUNT(ShipVia) AS CountShipVia2
FROM dbo.Orders
WHERE (ShipVia = 2)
GROUP BY EmployeeID
ORDER BY EmployeeID
Table 2 results
EmployeeID CountShipVia2
1
44
2
36
3
45
4
70
5
15
6
25
7
24
8
48
9
19
Table 3 the desired result:
EmployeeID CountShipVia1 CountShipVia2
1
82 44
2
71 36
3
81 45
4
116 70
5
29 15
6
48 25
7
44 24
8
75 48
9
29 19
thanksrobby
View 5 Replies
View Related
May 4, 2005
I have created a search interface for a large table and I allow users to search on keywords. The users can enter multiple keywords and I build a SQL based on their input to search a full-text indexed table. However the users want to be able to search like an old system they had, where they enter single words and then combine their searches to drill-down into the results. What would be the best method to combine searches?At the moment I can create a merged query from 2 queries if they have searched using single words, but I know down the line it will get far more complicated if they keep combining and merging even with multiple word entries. Each time they search I store the 'where' section of each query, then if they choose to combine I have a function to build a new query through arrays (to eliminate duplicates and sort etc)Is there a better way in SQL to combine queries as sometimes the logic of the combined query means no results are returned (because of OR/ AND conditions in the wrong places etc)e.g.1. Select count(ID) as myCount FROM myTable where (CONTAINS(title,'"run"') OR CONTAINS(subject,'"run"'))2. Select count(ID) as myCount FROM myTable where (CONTAINS(title,'"level"') OR CONTAINS(subject,'"level"'))Combined using my function creates:Select count(ID) as myCount FROM myTable where (contains(title,'"level"') AND contains(title,'"run"')) OR (contains(subject,'"level"') AND contains(subject,'"run"'))
When I combine I'm drilling down, so if the first query returns a count of 400 (where the title OR subject contains 'run') and then the second query returns 600 records (where the title OR subject contains 'level') I need to combine so that I'm looking for records where the title contains both keywords 'run' AND 'level' OR else the subject contains both 'run' AND 'level' and I end up with say 50 records where the title has both keywords OR the subject holds both words. I think the main trouble lies if they try combine a previously combines search with a new search. here my logic gets totally thrown and I'm not sure how to handle soemthing like this. Has anyone got any ideas or experience with this kind of functionality? In SQL or even in vb.net is there a method to combine searches easily?
View 1 Replies
View Related
Oct 18, 2013
I have a query (SELECT * FROM Pricing) that produces the following results
Stockcode|ProductID|OurSellPrice|SupplierTypeID|CompetitorPrice
SC0001___|123______|22.45_______|1_____________|25.23
SC0001___|123______|21.45_______|2_____________|25.23
I want to convert this to the following :
Stockcode|ProductID|OurSellPriceType1|OurSellPriceType2|CompetitorPrice
SC001____|123______|22.45____________|21.45____________|25.23
We only have two types of suppliers but not every product is available from each type of supplier so we might get the following results:
Stockcode|ProductID|OurSellPrice|SupplierTypeID|CompetitorPrice
SC0002___|124______|22.45_______|1_____________|25.23
Stockcode|ProductID|OurSellPriceType1|OurSellPriceType2|CompetitorPrice
SC001____|123______|22.45____________|NULL_____________|25.23
View 1 Replies
View Related
Jun 3, 2014
i have these 2 queries with the included results sets...What commands could I use to take the TotalBlueCircle Column from the 2nd Results Set and have it included next to the TotalRugby column in the 1st results set??Do i need to do a UNION or use Sub Queries or something else?
View 5 Replies
View Related
Jun 19, 2007
Hello there
I have an application that allows users to book rooms in a building. I have a booking request table and a rooms booked table since there is a booking that can be made that includes multiple rooms. I have an instance where i need to select the booking requests for a particular date and need to display the rooms for each booking. Since the rooms booked table has the booking request id i'm wondering if there is a way to combine all the subquery results into one record to get around the error of having multiple records being returned in a sub query. The table structures are as follow:
bookingrequestion - bookingrequestid, startdate, enddate
roomsbooked-id, bookingrequestid, roomname
i'm basically trying to use the following query
select br.bookingrequestid, (select roomname from roomsbooked where id = br.bookingrequest) as rooms
i'd like the results of the subquery to return the room names as A,B,C. I'm trying to avoid having to obtain the recordset for the booking requests and then loop through them and for each one obtain a recordset for the rooms, seems like too many database hits to me.
thanks
View 1 Replies
View Related
Aug 7, 2007
Need a little help here.
I have a set of product ids fed in as a delimited string and for each I need to extract the top 1 record from another query based on the id.
I need the results as one table.
Here is my code.
___________________________________
SET NOCOUNT ON
DECLARE @IdsString VARCHAR(255), @Id int
SELECT @IdsString = '918|808|1214|89|995|300|526|1207'
DECLARE GetData CURSOR
FOR Select s.ProductID FROM dbo.SplitProductIDs(@IdsString) as s
OPEN GetData
FETCH NEXT FROM GetData
INTO @Id
WHILE @@FETCH_STATUS = 0
BEGIN
SELECT TOP 1 v.*
FROM dbo.GetProductRateView as v
WHERE v.[id] = @Id
FETCH NEXT FROM GetData
INTO @Id
END
CLOSE GetData
DEALLOCATE GetData
_____________________________________
Do I need to create a temp table and do an 'Insert Into(Select...' with each cusor result or is there a better way?
Any help would be much appreciated.
NB Database was not designed and the client will not tolerate any changes to structure of the tables :eek:
Regards
Shaun McGuile
View 14 Replies
View Related
Mar 19, 2012
My application saves customer email addresses in two different fields in ym table
How do i combine two fields from the same table in a select statement?
I've tried the following:
Select EmailAddy + ', ' + FriendsEmail AS Expr1
FROM dbo.Contacts
But all I get are the results from one field.
View 4 Replies
View Related
Jul 2, 2014
I have a quick question for the SQL community about how to combine 3 tables to get the results needed...
The table names are :
setup_zipcode,
setup_category,
and listing
and inside setup_zipcode it has the columns:
zip_id , zip_code, zip_latitude and zip_longitude
and inside the setup_category it has the columns:
category_id, category_parent, category_path and category_name
and the final table for listing has the columns:
listing_id, listing_member, listing_category, listing_address, listing_city, listing_state, listing_zip and listing_country
I am having trouble getting them to inter-relate an query the needed results as I need to get back the LAT & LONG from the zip_latitude & zip_longitude columns for specific listing ids in certain categories...
So, the ONLY same variable between them is that listing_zip from LISTING table and zip_code from SETUP_ZIPCODE show the same zip codes..
How can I create a SQL query that checks the current category that is being displayed on the page results live and insert only the listing id (clients) that are in that listing_category and also pull that listing_id client's related zip_latitude & zip_longitude that relates to their specific listing_zip from the zip_code row in setup_zipcode?
I have tried many things and this looks like it would work but does not pull the related LAT & LONGs ...
$cat is assigned in a query previously on the page...
SELECT *
FROM
setup_zipcode, setup_category, listing
WHERE
listing_category LIKE '%-$cat-%'
AND
listing_zip = zip_code
AND
category_id = '$cat'
ORDER BY listing_title ASC
When I try to take the results (not sure if I am missing a step for printing the results after querying them or having to assign them somehow) and use the SMARTY TAGS assigned to zip_latitude and zip_longitude nothing shows on the published page... The other variables for the address do..
I have a loop defined as $listing_id and section is var so when I pull the query info using {$listing_address[var]}, {$listing_city[var]}, etc.. they work, but {$zip_latitude[var]} or {$listing_id[var].$zip_latitude} and {$listing_id[var].zip_latitude} so on do not work..
If I can get the variables to exist in the SQL QUERY then at least I will know that is correct and can work on how to get them to show correctly in the address for a map afterwards...
View 1 Replies
View Related
Jul 26, 2004
I know this has been addressed before but I can't find it...
I have a table with with a column called PersonId. I want a query that will return all the PersonId's as a comma delimited string...
Anyone able to help?
View 14 Replies
View Related
Mar 5, 2012
Customers order a product and enter in a source code (sourceCd). This sourceCd is tied to a marketing program. Idea being we can see that 100 customers ordered from this promo, 200 from this catalog, etc etc. The sourceCd that a customer enters is not always accurate so there is a magic process that adjusts this OrigSourceCd into a final SourceCd, that may or may not be the same.
I am trying to generate a result set of customer count by sales program based on both the original and final source code. Problem is, I have to do each query separately because in one, I have to join SourceCdKey to SourceCdKey to get the program associated with that SourceCd and in the other i have to join OrigSourceCdKey to SourceCdKey to get the program associated with the original sourceCd. There are some programs is one results set that are not in the other, and vice versa.
I'm trying to generate a list of that shows customer counts before and after for each program, some which may be null for one, but have counts for the other. I have tries creating 2 separating views and joining them but that doesn't work because it only returns the ones they have in common.
View 6 Replies
View Related
Mar 5, 2008
I'm having difficulty coming up with the right syntax for a query. Suppose I have a database containing a Stores table, an ProductInventory table, and a Customers table. The Stores table has an ID field that serves as a foreign key in both the ProductInventory table and in the Customers table. I'm trying to write a query that, for each Store record, will return the total number of records in the ProductInventory table and the total number of records in the Customers table.
The following query returns, for each store, the total number of records in the ProductInventory table:
SELECT Stores.Name,
COUNT(ProductInventory.ID) AS ProductInventoryItemCount
FROM Stores
LEFT JOIN ProductInventory ON Stores.ID = ProductInventory.StoreID
GROUP BY Stores.Name
The following query returns, for each store, the total number of records in the Customers table:
SELECT Stores.Name,
COUNT(Customers.ID) AS CustomerCount
FROM Stores
LEFT JOIN ProductInventory ON Stores.ID = Customers.StoreID
GROUP BY Stores.Name
I combined the two queries:
SELECT Stores.Name,
COUNT(ProductInventory.ID) AS ProductInventoryItemCount,
COUNT(Customers.ID) AS CustomerCount
FROM Stores
LEFT JOIN ProductInventory ON Stores.ID = ProductInventory.StoreID
LEFT JOIN Customers ON Stores.ID = Customers.StoreID
GROUP BY Stores.Name
When I run this last query, however, I get an "Arithmetic overflow error converting expression to data type int" error. Using COUNT_BIG instead of COUNT eliminates the error, but the numbers that are generated are astronomical in size. This indicates to me that there is a *lot* more table joining going on than I expected
What is the correct syntax to produce the desired results? I have a few other tables similar to ProductInventory and Customers; I'm hoping to extend the correct syntax so as to be able to get a comprehensive record count list for each store. Thanks for your help!
View 7 Replies
View Related
Feb 13, 2007
I have data that looks like this:
ID Value
1 Descr1
1 Descr2
1 Descr3
where Descr could range from 1 to 100 for each ID
The result set I need is:
Descr1,Descr2,Desc3...etc.
Does someone have a query to do this?
Thank you
View 8 Replies
View Related
Dec 19, 2014
I have data that looks like this:
Cus_no Inv_No Trans_type Amt_Inv Amt_Paid
100 12345 Other 0 -21.76
100 12345 Discount 0 -6.39
100 12345 Discount 6.39 6.39
100 12345 Discount 21.76 21.76
100 12345 Sales Inv 218.99 218.99
What I would like to do is a select statement that returns:
Cus_no Inv_no Amt_Inv Amt_Paid Disc_amt Other
100 12345 247.14 218.99 -6.39 -21.76
I've tried something like this but since I'm referencing trans_type I get a message that trans_type must be in Group by. doing that give me multiple records.
select cus_no, Inv_no, Sum(Amount_Invoiced_DC) AS InvAmt,
case trans_type when 'Sales Inv' then sum(Amount_Paid_DC) else 0 end as AmtPaid,
case when trans_type = 'Discount' and sum(Amount_Paid_DC)<0 then sum(Amount_Paid_DC) else 0 end as DiscountAmt
FROM BI50_BankTransactions_AR_InvcDt_H
where cus_no is not null
group by cus_no, Inv_no
View 2 Replies
View Related
May 4, 2007
Hii all.
quite urgent... I have 3 matix tables.. all the same row headings. I need to be able to make these visible/invisible depending on the user parameters. The reason for this, if a user hides table on the left.. the middle table needs to show the row headings. and last table must not.
The problem:
When making the row headings invisible it doesnt exactly chop off the textboxes... so the tables look disjoint.. and a big gap appears between both tables...
Is there a way to join these tables without leavings gaps ?
any help is appreciated.
Neil
View 7 Replies
View Related
May 16, 2008
Hi,
I'm trying to do this in T-SQL. I have a query that returns, for this matter, only 2 rows. The table output looks like this:
AdjType
AdjNbrStart
AdjNbrEnd
AdjTotalAmt
1
9
9
-134180
2
8
10
104981.42
How do you do it to bring back only one row that will look like so:
1
9
9
-134180
2
8
10
104981.4
Is it possible? Like I said, I only have 2 rows. I'm not concatenating these columns, just want to bring it back as one row. Any ideas? Thanks.
View 1 Replies
View Related
Apr 7, 2008
OK I have 4 differant Data Sources... One being a count of one DB, another count of another DB, another count of another and then another process from a script component. Each source returns 1 row of data with 1 column each except the Script Component. It returns 3 columns... Now I need to take each of the row's returned and combine them to a single row (line) and inset them into another table just as one single eatry. I am using a Union All and when it runs I see the 4 Data Sources say 1 Row... But after it hits the Union All it does 4 rows... What am I doing wrong or am I using the wrong component? Please if anyone can help that would be wonderful.
View 10 Replies
View Related
Jul 27, 2007
I was wondering if it's possible to have a stored procedure that has two select statements which you can combine as a single result set. For instance:select name, age, titlefrom tableaselect name, age, titlefrom tablebCould you combine these queries into a single result set?
View 2 Replies
View Related
Nov 21, 2007
Hi,
I am trying to combine information from two or more records into one and I am completely stuck on a solution for my problem so I hope there is someone out there who can help me.
My table looks like this:
ID - DayNr - Transportation - TransOrder - Route
25 - 1 - Car - 1 - Text A
25 - 1 - Train - 1 - Text B
25 - 1 - Train - 2 - Text C
25 - 7 - Train - 1 - Text D
25 - 7 - Train - 2 - Text E
I want to combine all Route - information belonging to the same combination of ID & DayNr & Transportation into one new record. The result should look like:
Column 1 - Column 2
25/1/Car - Text A
25/1/Train - TextB;TextC
25/7/Train - TextD;TextE
I have tried Coalesce-statements and Cursor-solutions but until now everything I tried didn't work. Ideas anyone?
Thanks.
RMG
P.S. ID is not my primary key and doesn't have to be unique
View 14 Replies
View Related
Oct 17, 2013
I have 3 queries pulling from the same table, trying to define a count on each criteria. I have the data pulling, but the data is in multiple rows. I want the data in one row with all the counts in each separate columns. Also I need to setup a flag if a client purchased and order within 30 days from their last purchase.
I am doing this select for each credit card, check and cash purchases. I do not know how to setup a flag where the client may have ordered and paid by check or cash after 30 days from a credit card purchase. Is this something that can be done?
select
clientnumber,count(distinct clientnumber) as cccnt,
0 as ckcnt, 0 as cacnt
from dbo.purchases
where orderdate >= 20120101 and orderdate <= 20121231 and
payment_type = 'CC'
group by clientnumber;
OUTPUT currently looks like this:
1234 2 0 0
1234 0 1 0
1234 0 0 4
Is it possible to result in this, along with a flag with the criteria above?:
1234 2 1 4 Y
View 3 Replies
View Related
Dec 20, 2007
Hi All,
I'm trying to develop a query that joins one record from a table with multiple matching records from another table all in one record,
Table1 has the primary key
id
--
1
2
3
4
Table2 has the follwing records
id year subject
-----------------
1 2000 English
1 2002 French
2 2004 English
2 2005 English
2 2006 English
3 2007 French
I want the result to be like this
id 2000 2001 2002 2003 2004 2005 2006 2007
-----------------------------------------------------------
1 English null French null null null null null
2 null null null null English English English null
3 null null null null null null null English
Appretiate your assistance
View 4 Replies
View Related
Jul 30, 2007
I have a table employee: that contains one column and three rows. How can I transform it using SELECT to display only one row and one column, with comma delimited strings: John, Mike, Dale?
Employee Name
John
Mike
Dale
View 5 Replies
View Related
Nov 21, 2007
Hi,
I am trying to combine information from two or more records into one and I am completely stuck on a solution for my problem so I hope there is someone out there who can help me.
My table looks like this:
ID - DayNr - Transportation - TransOrder - Route
25 - 1 - Car - 1 - Text A
25 - 1 - Train - 1 - Text B
25 - 1 - Train - 2 - Text C
25 - 7 - Train - 1 - Text D
25 - 7 - Train - 2 - Text E
I want to combine all Route - information belonging to the same combination of ID & DayNr & Transportation into one new record. The result should look like:
Column 1 - Column 2
25/1/Car - Text A
25/1/Train - TextB;TextC
25/7/Train - TextD;TextE
I have tried Coalesce-statements and Cursor-solutions but until now everything I tried didn't work. The big issue here is that I have to base my concatenation on 3 columns. Ideas anyone?
Thanks.
RMG
P.S. ID is not my primary key and doesn't have to be unique
View 1 Replies
View Related
Mar 21, 2006
Hello again,
Another combining multiple rows teaser, during a few routines I made a mistake and I would like to combine my efforts. Here is my data:
Code:
Table A
ID DSN VN AX Diag
1111296.54
3212318.00
Both DSNs share the same Patient_id in a seperate table which holds the DSN numbers and their corresponding patients.
Code:
Table B
DSN Patient_id
100000001
200000001
So what I need to do is maintain their unique 'ID' number in Table A but update their DSN numbers to reflect the first instance in Table B. So my data would look like this in both tables.
Code:
Table A
ID DSN VN AX Diag
1111296.54
3112318.00
Note: The second rows DSN changed to 1 from 2
Code:
Table B
DSN Patient_id
100000001
(Duplicate row removed with same patient_id)
The result would look like the above but as you noticed I need to remove the duplicate row that had the different DSN in Table B so that only one DSN remains that can map to multiple rows (IDs) in Table A.
Table A:
DSN can map to multiple rows (IDs)
IDs must be unique (aka kept to what they are currently)
Table B:
Second row with same DSN must be removed.
Any takes, ideas? I need to do this on a couple thousand rows....
Thanks, and im happy to clarify if needed.
View 1 Replies
View Related
Apr 3, 2014
I'm working on a project where I need to retrieve employees data and then combine the data into single row per employee.
Sample Data:
WITH SampleData (PERSON, [DATA], [FIELD]) AS
(
SELECT 1234,'04/02/2014','Date'
UNION ALL SELECT 1234,'123','Department'
UNION ALL SELECT 1234,80.0,'Rate'
)
SELECT *
FROM SampleData;
The results from the above are as follows:
PERSONDATA FIELD
123404/02/2014Date
1234123 Department
123480.0 Rate
The desired results would be:
PERSONDate Department Rate
123404/02/2014 123 80.0
View 7 Replies
View Related
Feb 4, 2015
How I could accomplish taking several rows for one account and concatenate them into one row, for example I have account_num, invoice_date, transaction_num, msg_counter,Message_2,SQL_LAST_UPDATE the special characters &,",!,$,# are used to determine the Message_2 content for a given account_number that are supposed to be together.
I am needing to put all of that accounts_messages in one row to display on a report, the table I am pulling this data from only has a varchar(40) for the message_2, a proprietary source so can't change that length, "I'VE ASKED THEM TO DO THIS, AND THEY REFUSED". So my only option is to insert this data into my table and create a single Message_2 for that account.
00000000332015-01-16 10:09:43.00000&19 confirmation so 2015-01-19 15:34:59.000
00000000332015-01-16 10:09:43.00000"19ACCT 186743. HE SAID RADIO HAD 2015-01-19 15:34:59.000
00000000332015-01-16 10:09:43.00000!19CALLED Carl ABOUT DEACTIVATION OF RADIO 2015-01-19 15:34:59.000
00000000332015-01-16 10:09:43.00000$19FFERENT ACCT # YEARS AGO, BUT 2015-01-19 15:34:59.000
00000000332015-01-16 10:09:43.00000'19I can cancel the (0.00) billing line on 2015-01-19 15:34:59.000
[Code] ....
View 7 Replies
View Related
Oct 14, 2015
Curious what the industry standard is combining multiple instances on single server ?
Right now i have separate servers for OLTP, SSAS, and SSIS, and for OTP have Development, Test, and production environments. Im considering combining the SSIS and SSAS services into additional instances on each environment servers.
Now (Production)
OLTP
SSAS
SSIS
After
1 Server with 3 separate instances for SSAS, SSIS, OLTP. Then replicate this model through the environments to utilize development and testing.
View 2 Replies
View Related
Nov 20, 2015
I have to run this 3 times for similar but slightly different parameters. I only change the very top peice of code slightly each time:
1. Partition by Forename, Surname, DOB, Postcode
2. Partition by Forename, DOB, Postcode
3. Forename, Surname, DOB.
As you can see very subtle change, ideally I'd like to find a way to run just one report where all of the above occur, the issue I face running separately is one person may appear on 1 or more giving duplicates.
USE HealthBI_Views;this bit below is basically grouping my output on Forename, Surname, DOB & Postcode. What the whole process is trying to achieve is to show where a patient which has all of the above fields identical but has a different patient identifier suggesting that the service has allocated to unique identifiers to the same person which will result in both records needing to be merged.
WITH cte
AS (SELECT *,
COUNT(HEYNo) OVER (
PARTITION BY Forename, Surname,
DOB
[code]...
--- this bit below is simply showing all instances where the above criteria is met and there are more then one instances.WHERE countOfHeyNo > 1
--- The final output display all patient identifiable information from the MF_PATIENT table so that the report can be created in SSRS and run routinely by the Data Quality Team who can then investigate each occurance.
View 5 Replies
View Related
Oct 2, 2006
The goal is to produce a single PDF consisting of a number of subreports. Some are landscape, others are portrait. The subreports may also be run as independent reports. The master report that contains them defaults to the width of the widest subreport, which is landscape. This causes all portrait subreports to spill over producing blank pages. Are there any work-arounds to concatenate multiple, single report PDFs into a single PDF and have page numbering too?
Thanks!
View 11 Replies
View Related
Apr 6, 2014
I joined these two tables and it pulled up the proper amount of records. If you check out the image you will see what the results are for this query.
Now all I need for this part would be to roll these up where I have one row per ProgramID and all the AttributeNames' together in a AttributeNames column for each id.
EXAMPLE: All in one row.
ProgramID | AttributeNames
887 | Studydesign, Control Groups, Primary Outcomes.
I have attached an image of the SQL VIEW that I need to modified so it does this.
THE QUERY:
SELECT TOP (100) PERCENT dbo.tblProgramAttributes.ProgramID, dbo.tblProgramAttributes.AttributeID AS PAattributeID, dbo.tblAttributes.AttributeID,
dbo.tblAttributes.AttributeName
FROM dbo.tblProgramAttributes INNER JOIN
dbo.tblAttributes ON dbo.tblProgramAttributes.AttributeID = dbo.tblAttributes.AttributeID
WHERE (dbo.tblProgramAttributes.AttributeID NOT LIKE '%ProgramType%')
ORDER BY dbo.tblProgramAttributes.ProgramID DESC
View 5 Replies
View Related
Feb 26, 2015
I am needing to combine the Notes field where Number and date are the same...For example
for Number 0000000003 I need notes to Read ('CHK # 2452 FOR $122.49 REJECTED AS NSF ON 2/25/15') the note counter is different for each row, and is combination of special char, 0-Z and looks like the (!) depicts the start of a new Number.
CREATE TABLE [dbo].[MyTable](
[NUMBER] [varchar](10) NULL,
[HD_DATE_TIMEX] [datetime] NULL,
[TRANS_NO] [varchar](2) NULL,
[MESSAGE_COUNTER] [varchar](1) NULL,
[Code] .....
View 9 Replies
View Related
Jul 19, 2007
Hi, I am stumped and was hoping someone could help me out. Any help isappreciated.I have a view that looks sort of like this (but with a lot moreentries of course)UniqueIdentifyierColumn1Column21 9999 1002 9999 2003 9999 300What I want to do is to add a column to the view that will contain alist of the values from column 2 where column 1 is the same.UniqueIdentifyierColumn1Column2Column31 9999100100, 200, 3002 9999200 100, 200, 3003 9999300100, 200, 300
View 1 Replies
View Related
