I have a table employee: that contains one column and three rows. How can I transform it using SELECT to display only one row and one column, with comma delimited strings: John, Mike, Dale?
Employee Name
John
Mike
Dale
I joined these two tables and it pulled up the proper amount of records. If you check out the image you will see what the results are for this query.
Now all I need for this part would be to roll these up where I have one row per ProgramID and all the AttributeNames' together in a AttributeNames column for each id.
EXAMPLE: All in one row.
ProgramID | AttributeNames
887 | Studydesign, Control Groups, Primary Outcomes.
I have attached an image of the SQL VIEW that I need to modified so it does this.
THE QUERY:
SELECT TOP (100) PERCENT dbo.tblProgramAttributes.ProgramID, dbo.tblProgramAttributes.AttributeID AS PAattributeID, dbo.tblAttributes.AttributeID,
dbo.tblAttributes.AttributeName
FROM dbo.tblProgramAttributes INNER JOIN
dbo.tblAttributes ON dbo.tblProgramAttributes.AttributeID = dbo.tblAttributes.AttributeID
WHERE (dbo.tblProgramAttributes.AttributeID NOT LIKE '%ProgramType%')
ORDER BY dbo.tblProgramAttributes.ProgramID DESC
Hi, I am stumped and was hoping someone could help me out. Any help isappreciated.I have a view that looks sort of like this (but with a lot moreentries of course)UniqueIdentifyierColumn1Column21 9999 1002 9999 2003 9999 300What I want to do is to add a column to the view that will contain alist of the values from column 2 where column 1 is the same.UniqueIdentifyierColumn1Column2Column31 9999100100, 200, 3002 9999200 100, 200, 3003 9999300100, 200, 300
View 1 Replies View RelatedI have data that looks like this:
ID Value
1 Descr1
1 Descr2
1 Descr3
where Descr could range from 1 to 100 for each ID
The result set I need is:
Descr1,Descr2,Desc3...etc.
Does someone have a query to do this?
Thank you
Hi,
I'm trying to do this in T-SQL. I have a query that returns, for this matter, only 2 rows. The table output looks like this:
AdjType
AdjNbrStart
AdjNbrEnd
AdjTotalAmt
1
9
9
-134180
2
8
10
104981.42
How do you do it to bring back only one row that will look like so:
1
9
9
-134180
2
8
10
104981.4
Is it possible? Like I said, I only have 2 rows. I'm not concatenating these columns, just want to bring it back as one row. Any ideas? Thanks.
Hello again,
Another combining multiple rows teaser, during a few routines I made a mistake and I would like to combine my efforts. Here is my data:
Code:
Table A
ID DSN VN AX Diag
1111296.54
3212318.00
Both DSNs share the same Patient_id in a seperate table which holds the DSN numbers and their corresponding patients.
Code:
Table B
DSN Patient_id
100000001
200000001
So what I need to do is maintain their unique 'ID' number in Table A but update their DSN numbers to reflect the first instance in Table B. So my data would look like this in both tables.
Code:
Table A
ID DSN VN AX Diag
1111296.54
3112318.00
Note: The second rows DSN changed to 1 from 2
Code:
Table B
DSN Patient_id
100000001
(Duplicate row removed with same patient_id)
The result would look like the above but as you noticed I need to remove the duplicate row that had the different DSN in Table B so that only one DSN remains that can map to multiple rows (IDs) in Table A.
Table A:
DSN can map to multiple rows (IDs)
IDs must be unique (aka kept to what they are currently)
Table B:
Second row with same DSN must be removed.
Any takes, ideas? I need to do this on a couple thousand rows....
Thanks, and im happy to clarify if needed.
I'm working on a project where I need to retrieve employees data and then combine the data into single row per employee.
Sample Data:
WITH SampleData (PERSON, [DATA], [FIELD]) AS
(
SELECT 1234,'04/02/2014','Date'
UNION ALL SELECT 1234,'123','Department'
UNION ALL SELECT 1234,80.0,'Rate'
)
SELECT *
FROM SampleData;
The results from the above are as follows:
PERSONDATA FIELD
123404/02/2014Date
1234123 Department
123480.0 Rate
The desired results would be:
PERSONDate Department Rate
123404/02/2014 123 80.0
How I could accomplish taking several rows for one account and concatenate them into one row, for example I have account_num, invoice_date, transaction_num, msg_counter,Message_2,SQL_LAST_UPDATE the special characters &,",!,$,# are used to determine the Message_2 content for a given account_number that are supposed to be together.
I am needing to put all of that accounts_messages in one row to display on a report, the table I am pulling this data from only has a varchar(40) for the message_2, a proprietary source so can't change that length, "I'VE ASKED THEM TO DO THIS, AND THEY REFUSED". So my only option is to insert this data into my table and create a single Message_2 for that account.
00000000332015-01-16 10:09:43.00000&19 confirmation so 2015-01-19 15:34:59.000
00000000332015-01-16 10:09:43.00000"19ACCT 186743. HE SAID RADIO HAD 2015-01-19 15:34:59.000
00000000332015-01-16 10:09:43.00000!19CALLED Carl ABOUT DEACTIVATION OF RADIO 2015-01-19 15:34:59.000
00000000332015-01-16 10:09:43.00000$19FFERENT ACCT # YEARS AGO, BUT 2015-01-19 15:34:59.000
00000000332015-01-16 10:09:43.00000'19I can cancel the (0.00) billing line on 2015-01-19 15:34:59.000
[Code] ....
I am needing to combine the Notes field where Number and date are the same...For example
for Number 0000000003 I need notes to Read ('CHK # 2452 FOR $122.49 REJECTED AS NSF ON 2/25/15') the note counter is different for each row, and is combination of special char, 0-Z and looks like the (!) depicts the start of a new Number.
CREATE TABLE [dbo].[MyTable](
[NUMBER] [varchar](10) NULL,
[HD_DATE_TIMEX] [datetime] NULL,
[TRANS_NO] [varchar](2) NULL,
[MESSAGE_COUNTER] [varchar](1) NULL,
[Code] .....
I have a table of attributes set up as follows:
ID, Value, Group
1, Football, Sports
1, Baseball, Sports
1, Basketball, Sports
2, Baseball, Sports
3, Football, Sports
1, Lambda Sigma, Greeks
2, Delta Delta, Greeks
etc.
I want a query that will combine that values for each ID into one field per group. So if ID 1 has multiple sports but also a greek attribute, they end up with two rows; the first row containing the combined sports values and the second row the greek valued not combined, because there was only one value in that group for that ID. For example:
ID, Combined Values, Group
1, Football Baseball Basketball, Sports
2, Baseball, Sports
3, Football, Sports
1, Lambda Sigma, Greeks
2, Delta Delta, Greeks
Please can anyone help me for the following?
I want to merge multiple rows (eg. 3rows) into a single row with multip columns.
for eg:
data
Date Shift Reading
01-MAR-08 1 879.880
01-MAR-08 2 854.858
01-MAR-08 3 833.836
02-MAR-08 1 809.810
02-MAR-08 2 785.784
02-MAR-08 3 761.760
i want output for the above as:
Date Shift1 Shift2 Shift3
01-MAR-08 879.880 854.858 833.836
02-MAR-08 809.810 785.784 761.760
Please help me.
I have the following database structure
Stock Depth41 Depth12 Depth34
AAA 1 2 1
BBB 2 2 4
How can I show Each Depth column as seperate row
AAA 1
AAA 2
AAA 1 as follows
Hello,
I need to concatenate a column from multiple rows into a single column in a new table.
How can I do this?
SID NAME PGROUP
------------------------------------------------------------
3467602 CLOTHINGACTIVE
3467602 CLOTHINGDANCE
3467602 CLOTHINGLWR
Need to have
SID NAME PGROUP
------------------------------------------------------------
34676 02 CLOTHING ACTIVE , DANCE, LWR
THANK YOU
i want to split the value of one column into multiple rows. based on comp capacity. pl help me in writing query
Actual table
Product IdProductQtyCompCapacity
1 8000 5000
2 10000 5000
4000
4000
Resultant table
Product IdProductQtyCompCapacity
2 50005000
2 50005000
1 40004000
140004000
Newbie question here. I have two tables that have a one to many relationship. I want to create a query that takes the info from the child table (possibly multiple rows) and concatenates it into a single column in the parent table. The tables are:TableParent (ASSIGNNUM (PK), DESC, STARTDATE)TableChild (ASSIGNNUM (FK), EMPLOYEENUM)There could be multiple employees for each assignment. Sample data:TableParent1....First Assignment....05/01/20082....Second Assignment...05/03/20083....Third Assignment....05/07/2008TableChild1....553422....334562....523433....352253....451213....11553I would like the query result to look like this:1....First Assignment....05/01/2008....553422....Second Assignment...05/03/2008....33456,523433....Third Assignment....05/07/2008....35225,45121,11553Any suggestions would be appreciated!
View 5 Replies View RelatedNewbie question here. I have two tables that have a one to many relationship. I want to create a query that takes the info from the child table (possibly multiple rows) and concatenates it into a single column in the parent table. The tables are:
TableParent (ASSIGNNUM (PK), DESC, STARTDATE)
TableChild (ASSIGNNUM (FK), EMPLOYEENUM)
There could be multiple employees for each assignment. Sample data:
TableParent
1....First Assignment....05/01/2008
2....Second Assignment...05/03/2008
3....Third Assignment....05/07/2008
TableChild
1....55342
2....33456
2....52343
3....35225
3....45121
3....11553
I would like the query result to look like this:
1....First Assignment....05/01/2008....55342
2....Second Assignment...05/03/2008....33456,52343
3....Third Assignment....05/07/2008....35225,45121,11553
Any suggestions would be appreciated!
I have a table that has values as follows:PersonID Degree55 MD55 Phd55 RN60 MD60 PhdI need a create a query that will give me output like this:PersonID Degree55 MD, Phd, RN60 MD, PhdAny ideas
View 16 Replies View RelatedI want to display the top 5 count of areacodes for each name
I
want to combine all the results for the areacodes into one column for
each user. like a csv. I tried my code below but the results just
return the same 5 of areacodes for all names on each area code row with
each callername. like
joe blow 123,456,755,312,465,567,555
bill jones 123,456,755,312,465,567,555
I just want the top 5 for each particular name.
I tried reading a few articles on putting multiple colums in one row and i could not figure out what i am missing!
Thanks
DECLARE @Stage TABLE (RowID INT IDENTITY(1, 1), CallerName VARCHAR(256), AreaCode VARCHAR(3), Calls INT, theDate DATETIME,myareacodes int)
declare @MyAreaCodes varchar(50)
INSERT @Stage
(
CallerName,
AreaCode,
Calls,
theDate
--myAreacodes
) --This is where the area code data comes from I can get it to display in multiple colums, but -- I want the area codes to be on one line for each name
SELECT CallerName,
SUBSTRING(TargetNum, 2, 3) AS AreaCode,
COUNT(*) AS AreaCodeCount,
DATEADD(day, DATEDIFF(day, 0, GtCalcDate), 0) as myDate
FROM CDRMAIN
WHERE LEN(TargetNum) >= 11
AND TargetNum NOT LIKE '_800%'
AND GtCalcDate >= '2006-11-06'
AND GtCalcDate < '2006-11-07'
GROUP BY CallerName,
SUBSTRING(TargetNum, 2, 3),
DATEADD(day, DATEDIFF(day, 0, GtCalcDate), 0)
ORDER BY CallerName,
COUNT(*) DESC
-- Get Calls
SELECT s.CallerName,
s.AreaCode,
s.Calls,
s.theDate--,myareacodes
FROM @Stage s
INNER JOIN (
SELECT CallerName,
MIN(RowID) mirw,
4 + MIN(RowID) marw
FROM @Stage
GROUP BY CallerName
HAVING (CallerName = 'name1') OR
(CallerName = 'name2')
) q ON q.CallerName = s.CallerName AND s.RowID BETWEEN q.mirw AND q.marw
ORDER BY callername,Calls desc
--
set @MyAreaCodes =''
--
SELECT top 5 @MyAreaCodes = @MyAreaCodes + ISNULL(AreaCode,'') + ',' from @Stage
--
SELECT CallerNAme,@MyAreaCodes AS MyAreaCodes from @stage
Group By CallerName
I have a table with two columns refid and name and it has the following values
1 tom
1 jim
2 bob
1 bob
I need a resultset that would have the following values
1 tom, jim, bob
2 bob
I have tried couple of things one being:
DECLARE @namelist VARCHAR(1000)
SELECT @namelist = COALESCE(@namelist +', ' ,'') + name FROM sales where refid = 1
SELECT @namelist
But I am looking for a resultset with a unique refid and all the names comma separated for that refid.
CREATE TABLE [dbo].[x1](
[nomer] [varchar](15) NOT NULL,
[tgl] [datetime] NOT NULL,
CONSTRAINT [pk_x1] PRIMARY KEY CLUSTERED
(
[nomer] ASC,
[Code] ....
Result :
nomer tanggal
12013-07-28 00:00:00.000
12013-07-29 00:00:00.000
12013-07-30 00:00:00.000
I Want to make :
nomer tanggal
1 28,29,30
I have multiple number of rows i want to change into column wise. My data
PondCropDOCABWTargetABW
01PA01-18700.21
01PA01-18150.590.77
01PA01-18221.241.5
01PA01-18280.922.6
01PA01-18351.823.7
[Code] ....
I want the data should be like these
01PA01-18 01PA02-18 01PA03-18...206B15-01 Target ABW
Doc ABW Doc ABW Doc ABW Doc ABW
7 0 7 0 7 0 11 0.42 0.21
15 0.59 15 0.59 15 0.59 18 0.77 0.77
22 1.24 22 1.24 22 1.14 25 1.22 1.5
28 0.92 28 0.87 28 0.91 32 2.7 2.6
35 1.82 . . . . . . .
42 2.6 . . . . . . .
49 3.62 . . . . . . .
56 4.64
63 5.54
66 6.24
73 7.25
With the below query iam able to retrieve all the tables invloved in a stored proc. But, what I want to display the table names as comma separated list for each table.
;WITH stored_procedures AS (
SELECT o.id,
o.name AS proc_name, oo.name AS table_name,
ROW_NUMBER() OVER(partition by o.name,oo.name ORDER BY o.name,oo.name) AS row
FROM sysdepends d
INNER JOIN sysobjects o ON o.id=d.id
INNER JOIN sysobjects oo ON oo.id=d.depid
WHERE o.xtype = 'P')
SELECT id,proc_name, table_name FROM stored_procedures
WHERE row = 1
ORDER BY proc_name,table_name
I need to split a row into multiple rows based on multiple column values.
time_id = 111
employee_id = 222
time_in = 10:00
time_out = 16:00
break1_in = 12:00
break1_out = 13:00
break2_in = 14:00
break2_out = 15:00
I would like to break this into multiple time_in/time_out based on if they have breaks. Breaks are not required and will come across blank if non are taken.
row 1
time_in 10:00
time_out 12:00
row 2
time_in 13:00
time_out 14:00
row 3
time_in 15:00
time_out 16:00
I have the table below and like to combine the rows to create a single link row in a new column. The rows should be combined based on the job number columns which is the same for the rows to be combined.
DECLARE @M31
( M31_SQL_ID INT
,JOB_NUMBER INT
,LINE_NUMBER INT
,WORKS_DESC VARCHAR)
[Code] ...
Output should be as below
219242
16/7/15 called tenant and she thought we would just fix for free - advised her I can get a quote how ever she may have to pay - she will call back
219245
16/7/15 called tnt said no report number. Said she will speak with her husband and call back with her decision and 16/07/15 the work order was sent to agent ...
Scenario is like that single dept can have multiple LocationHeads, If Location heads are multiple then they should display in single column using *starting the name as mentioned bottom under required output.
Below is sample of data:
create table #Temp(depID int, Name varchar(50),LocationHead varchar(50))
insert into #temp values(1,'test','head1')
insert into #temp values(1,'test','head2')
insert into #temp values(1,'test','head3')
insert into #temp values(2,'test1','head1')
insert into #temp values(2,'test1','head2')
Required output
depID Name LocationHead
1test *head1,*head2,*head3
2test1 *head1,*head2
How to split a column data into multiple rows, below is the requirement...
Create table #t3 (id int, country (varchar(max))
INSERT #t3 SELECT 1,' AU-Australia
MM-Myanmar
NZ-New Zealand
PG-Papua New Guinea
PH-Philippines'
Output should be like below
1 ,AU-Australia
1,MM-Myanmar
1,NZ-New Zealand
1,PG-Paua New Guinea
1,PH-Phlippines
Note: we are getting source data from sqlserver tables.
I googled and found below way but did't get the output as required
SELECT A.id, a.country,
Split.a.value('.', 'VARCHAR(500)') AS String
FROM (SELECT id, country ,
CAST ('<M>' + REPLACE(country, ' ', '</M><M>') + '</M>' AS XML) AS String
FROM #t3) AS A CROSS APPLY String.nodes ('/M') AS Split(a);
Hi i want to create a table as follows :if exists (select * from dbo.sysobjects where id =object_id(N'[Indexes]') and OBJECTPROPERTY(id, N'IsUserTable') = 1)drop table [Indexes]GOCreate table Indexes(indexname Varchar(100), index_DescriptionVarchar(100), index_keys Varchar(100))GOINSERT INTO Indexes EXEC sp_helpindex 'SDM_Fact_Order_Detail'GOThis will give me a table (northwind)IX_Auto_SDM_Fact_FK_Shipped_Date nonclustered located onSAMIS_SDM_Index FK_Shipped_DateIX_Auto_SDM_Fact_Order_Detail_FK_Insert_Dateclustered located onSAMIS_SDM_Data1FK_Insert_Date, FK_Insert_TimeAs you see sp_helpindex will give me a comma seperated field. I wantto split the third column FK_Insert_Date, FK_Insert_Time into a extrarowLike this :IX_Auto_SDM_Fact_FK_Shipped_Date FK_Shipped_DateIX_Auto_SDM_Fact_Order_Detail_FK_Insert_Date FK_Insert_DateIX_Auto_SDM_Fact_Order_Detail_FK_Insert_Date FK_Insert_TimeCan anyone help me with this?ThanxHennie
View 1 Replies View RelatedI've got what I thought was a fairly simple matrix request, but just can't seem to do it in reporting services.
In the rows, things are grouped by campaign. In the columns, things are grouped by district. Something like this:
Area1 Area2 Area3 Total
CampaignType1 1 2 3 6
CampaignType2 2 4 1 7
CampaignType3 3 3 1 7
Total 6 9 5
Campaign and Area are all selectable by parameters, so the actual number of rows is dynamic.
What I would like to do is an additional aggregates other then sum for the total - things like average, percent to goal, etc.
Area1 Area2 Area3 Average % attained Total
CampaignType1 1 2 3 2 60% 6
CampaignType2 2 4 1 2.33 70% 7
CampaignType3 3 3 1 2.33 70% 7
Total 6 9 5
And this is where, either I'm completely missing something, or SSRS and I have a huge communication breakdown . I absolutely cannot seem to do this. I tried adding additional columns, but they are grouped under area, not after it - in the above example, it would result in three new columns, one for each area type, not 1. Confusing to describe, but looks something like:
Area1 Area2 Area3 Total
Sum Avg Sum Avg Sum Avg CampaignType1 1 xx
CampaignType2 2 yy
CampaignType3 3 zz
Total
I hope that conveys the idea w/o having to fill it all in.
I'm lost as to how to get this accomplished. All I can think of is adding a union dummy row into the actual stored proc to make a different area type (say, AreaAverage) just to add in an additional column and that make sure it sorts at the end. That screams hack to me. Any help????
I have excel files where the column headers I care about are on line 5, and the actual data doesn't begin until line 6. Other than deleting the first 4 lines, which is impractical, how can I get the Excel Connection Manager to import the data correctly? I was able to do this under DTS, so I have to imagine it's possible.
Thanks!
I have this data I need to query where if there is more than one startdate for a person, I need to get the earliest startdate, however get the latest enddate and money associated with that enddate. Highlighted in blue is an example of the values I need to return within one record.
Personstartdateenddate Money
7d3397/1/201412/31/2014 1000
7d3391/1/20145/23/2014 355
Deciding whether or not to use a CTE or this simple faster approach utilizing system tables, hijacking them.
SELECT s.ORDER_NUMBER, s.PRODUCT_ID, 1 AS QTY, s.VALUE/s.QTY AS VALUE
FROM @SPLITROW s
INNER JOIN master.dbo.spt_values t ON t.type='P'
AND t.number BETWEEN 1 AND s.QTY
Just wanted to know if its okay to use system tables in a production environment and if there are any pit falls of using them ?
I have a table that is used to build rules. The rules point to other columns in other tables and usually contain only one value (i.e. ABC). But one of the options is to add a comma-separated list of SSNs (i.e. 123123123,012012012,112231122). I am trying to build a single query that allows me to leverage that list to get multiple rows from another table.
This obviously works:
SELECT * FROM vw_Person_Profile P (NOLOCK)
WHERE P.PrsnPIISSN_Chr IN ('123123123','012012012','112231122')
But this does not:
SELECT * FROM vw_Person_Profile P (NOLOCK)
WHERE P.PrsnPIISSN_Chr IN (
SELECT '''' + REPLACE(CONVERT(VARCHAR(4000),txtFieldValue), ',', ''',''') + ''''
FROM MassProcessing_Rules PR
WHERE PR.intRuleID = 10
)
Hello,
I have a question, what does a statement look like that finds the duplicate rows and combines them,
I have a table named PRODUCTS in it 3 columbs Cost, Stock, Part_number.
I need to find all Part_numbers that dublicate, Combine the rows into 1 & combine (sum, add) their stock together is the new row & take an avarerage of their cost and use it as cost in the new row where they combine.
Please help me, I am stalled. Looked all over the internet & could not find anything, I really need this for a project I can not finish.
I have the following SQL statement:
SELECT part_number,
COUNT(part_number) AS NumOccurrences
FROM Products
GROUP BY Part_number
HAVING COUNT(part_number) > 1