Combining Reports With A Set Of Parameters
Mar 31, 2008
Is it possible to run a report with some multiple parameters values and output it to a single file file? For example if you have a parameter list (1,2,3) and you want to run the report for parameters (1,2). Our users generate the list of parameters and rather run the report for each one, they would like to have reporting services run it for the whole set and just output 1 file. I have searched everywhere and can't find anything that works. Someone suggested sub reports but based on what I saw, it didn't look very useful. I can go into more detail if neccessary, this has been bugging me for a while now.
Thanks
View 1 Replies
ADVERTISEMENT
Feb 2, 2007
I'm trying to create a report that is actually 4 reports. Each has it's own page headers and Footers.
I can't use sub reports because I need the headers and footers to show for each indivual report.
My output is going to be PDF, and I know how to write code that i could use to combine the PDFs but I really want to do this in the report. I don't want to have to use some outside process to get my wanted output, If I can get away with it. Any help is appreciated!! Thanks.
View 2 Replies
View Related
Jun 24, 2015
Is there a way to combine 2 stored procedures with a different set off parameters.
Basically my 1st stored procedure has the following parameters:
1.@PlanID
2.@FinancialYearID
3.@RangetypeID
My second stored proc has the following:
1.@FinancialYearID
2.@IndicatorID
3.@VersionID
I have researched and so far nothing seems to be working. There is a conflict between the FinancialYearID of the 1st and 2nd stored procs.
My overall result is the combination of the 1st and 2nd storedprocs in 1.
View 9 Replies
View Related
May 17, 2007
I use the Reports Servers Design to Design My report, but I need to use multi value fot Report Parameters, But Don.t to do.
Mulit Parameters (Type = 'A' , 'B')
A Value are '1' , '2'
B Value are '3' , '4'
I use SQL Script to Run
Select * From XXX
Where A IN (@Type)
@Type may be 1,2,3,4 or 1,2 or 3,4
How to slove
Thanks
View 4 Replies
View Related
May 8, 2008
how do u pass parameters to a subreport.... i tried doin it but got an error msg sayin "Sub report cannot be displayed"
any solution????
View 4 Replies
View Related
Oct 3, 2007
Hi,
I am a beginner with SQL Reporting Services and having a problem. I can deploy reports with no parameters and the datasources fine. But when I deploy a report with a parameter I get the following error "An unexpected error occurred in Report Processing." I looked at the log file and this is what I found. Any suggestions on how to fix this?
aspnet_wp!processing!7!10/03/2007-14:59:11:: e ERROR: Throwing Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: An unexpected error occurred in Report Processing., ;
Info: Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: An unexpected error occurred in Report Processing. ---> System.IO.FileNotFoundException: Could not find file 'C:Documents and SettingsD2P6PM51ASPNETLocal SettingsTempexpression_host_a23b56b0ae874a989c3e9c76fe9a07ff.dll'.
File name: 'C:Documents and SettingsD2P6PM51ASPNETLocal SettingsTempexpression_host_a23b56b0ae874a989c3e9c76fe9a07ff.dll'
at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
at System.IO.FileStream.Init(String path, FileMode mode, FileAccess access, Int32 rights, Boolean useRights, FileShare share, Int32 bufferSize, FileOptions options, SECURITY_ATTRIBUTES secAttrs, String msgPath, Boolean bFromProxy)
at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share)
at Microsoft.ReportingServices.ReportProcessing.ReportCompileTime.InternalCompile(Report report, AppDomain compilationTempAppDomain, Boolean refusePermissions)
at Microsoft.ReportingServices.ReportProcessing.ReportCompileTime.Compile(Report report, AppDomain compilationTempAppDomain, Boolean refusePermissions)
at Microsoft.ReportingServices.ReportProcessing.ReportPublishing.Phase3(ParameterInfoCollection& parameters, AppDomain compilationTempAppDomain, Boolean generateExpressionHostWithRefusedPermissions)
at Microsoft.ReportingServices.ReportProcessing.ReportPublishing.CreateIntermediateFormat(CatalogItemContext reportContext, Byte[] definition, CreateReportChunk createChunkCallback, CheckSharedDataSource checkDataSourceCallback, PublishingErrorContext errorContext, AppDomain compilationTempAppDomain, Boolean generateExpressionHostWithRefusedPermissions, String& description, String& language, ParameterInfoCollection& parameters, DataSourceInfoCollection& dataSources, UserLocationFlags& userReferenceLocation, ArrayList& dataSetsName, Boolean& hasExternalImages, Boolean& hasHyperlinks)
at Microsoft.ReportingServices.ReportProcessing.ReportProcessing.CompileReport(CatalogItemContext reportContext, Byte[] reportDefinition, CreateReportChunk createChunkCallback, CheckSharedDataSource checkDataSourceCallback, PublishingErrorContext errorContext, AppDomain compilationTempAppDomain, Boolean generateExpressionHostWithRefusedPermissions, String& reportDescription, String& reportLanguage, ParameterInfoCollection& parameters, DataSourceInfoCollection& dataSources, UserLocationFlags& userReferenceLocation, ArrayList& dataSetsName, Boolean& hasExternalImages, Boolean& hasHyperlinks)
at Microsoft.ReportingServices.ReportProcessing.ReportProcessing.CreateIntermediateFormat(CatalogItemContext reportContext, Byte[] reportDefinition, CreateReportChunk createChunkCallback, CheckSharedDataSource checkDataSourceCallback, AppDomain compilationTempAppDomain, Boolean generateExpressionHostWithRefusedPermissions)
--- End of inner exception stack trace ---
Thanks
Allan
View 1 Replies
View Related
Dec 27, 2007
How do you create a link on one report to run another report passing a parameter (or two).
View 4 Replies
View Related
Jan 31, 2007
I have one report "Incident Summary" which has a Report Parameter called DimPoolPool using ParameterValue for Value Field and ParameterCaptionIndented for Label field. The default value is [Dim Pool].[Pool].[All]
From another chart report I want to be able to click on a column to make open the Incident Summary report parameterized by "Pool". So I got to properties of the chart > Data > Values > Edit > Action > Jump to report > Parameter, and here I enter DimPoolPool = Fields!Pool.Value.
It seems to me that this should be picking up [Dim Pool].[Pool].&[poolname] and entering that into the parameters of Incident Summary report. However instead the Incident Summary opens with blank parameter waiting for user to enter.
How do you format parameters correctly between reports?
View 2 Replies
View Related
Nov 17, 2007
I need the ability to choose between quite a few cascading olap time query parameters for a report without my creating a report or subreport for every combination of these parameters. If the recordset were smaller perhaps I could filter it when it's passed back to the report but it's a few million. Will switching to expression-based command text and building the mdx queries in code work? I would like to be able to tell rs to remove the parameter from the query if no selections are made.
View 2 Replies
View Related
Oct 31, 2007
I have seem many messages about this, mostly over a year old, with no satisfying answer.
I have a set or reports that jump between each other, passing parameters, that work fine in VS 2005. (They are mostly based on sql server 2005 stored procedures).
When the reports are deployed, the one that jumps without a parameter works. The ones that pass parameters do not even 'activate'- that is, the text box to be clicked does not allow the user to click.
If I go to the report directly through the browser, it lists the missing parameters and the report does not render.
I am using IE7. All SP on IE and SQL are current.
Microsoft- will you be making this feature work anytime soon?
Thanks
View 5 Replies
View Related
Nov 16, 2007
hi friends,
i am having one crystal report from and one web application from which contains one crystal reportviewer i need to give the parameter in the web form and get the data for that parameter untill this its working fine for me.
my problem i need to display the value in the crystal report which i gave in the web form.
View 1 Replies
View Related
Apr 25, 2008
Hi,
I am working on SSRS. I need to open a new report from one report when user clicks on some
particular summarized count link.
It is a sort of drilled down report. I am not getting how to pass the respective Ids (more
than one) to the next report when user clicks on the summarized link in the 1st report.
These ids I want to use as a parameter (multiple) in the 2nd report to dump the rows from
the database.
View 3 Replies
View Related
Apr 25, 2008
Hi,
I am working on SSRS. I need to open a new report from one report when user clicks on some
particular summarized count link.
It is a sort of drilled down report. I am not getting how to pass the respective Ids (more
than one) to the next report when user clicks on the summarized link in the 1st report.
These ids I want to use as a parameter (multiple) in the 2nd report to dump the rows from
the database.
View 1 Replies
View Related
Dec 20, 2007
Hello,
I have report A and Report B. In Report A I am using the Jump to Report functionality to go to Report B. I have a multi-valued parameter in botht the reports. So In Parmeters I am giving
Parameters!xx.value to pass the value from Report A to Report B. The multi valued parameter has values 1,2,3,4 in both the reports.
I have a scenario where I need to pass a value of 5 to the report B. When I try to hard code the value I run into error while going to the second reeport saying parameter not declared.
Can any one help me with this. Its very urgent.
Thanks,
SqlNew
View 1 Replies
View Related
May 4, 2008
I am trying to build a report that allows a user to enter partial text that filters the values in a drop down
For examle;
Lets say I am selecting a value from a drop down for States and I want to type in FL to filter the collection down so that only Florida appears in the select list.
I know the above example wont work since I cannot actaully enter text into a drop down, however
I have also tried to seperate this functionality by creating one report parameter for entering the search text and another parameter that will display a filtered data set using the text entered in the first parameter.
Is this something that reporting services can handle ? If it is please provide a brief example.
Thanks
View 6 Replies
View Related
Mar 15, 2007
Is it possible to create cascading parameters with in Report Builder? I have done this with Report Designer but i need a solution with Report Builder.
(I need the structure: First the user selects the state, afer the postpack the cirties of the state are listed in another dropdownlist for selection).
Thanks in advance
View 1 Replies
View Related
Nov 10, 2006
If all the parameters for a report have default values, the report runs automatically as soon as you open it. Is there a way to prevent this?
View 9 Replies
View Related
Nov 20, 2015
I run these stored procedure to build the report and I am able successfully to build the report but I need some prompts to in the report to get the specific data .
ALTER
PROCEDURE [dbo].[Sharepoint_Ticket_Report]
@StartDate
DATETIME,
@EndDate
[Code] ....
And for prompts how to create created_by and message_type dropdowns as shown in picture.
View 7 Replies
View Related
Nov 5, 2007
Hello SQL Server Experts, Data Analysts, and Report Writers et al:
re: Reporting Options with SQL Server
I wanted to propose an offshoot to the pryor thread:
Would anyone take a stab at comparing Access Reports, Crystal Reports,
Cognos or other options to all the Reporting Services and its components offered as part ofSQL Server, especially as to extracting data from SQL Server into a report format?
I guess this is a far as capabilites, ease of use, limitations, and especially formatting
or presentation of the end report product?
Thank you to all, and I hope this is a beneficial discussion to others.
Hal1490
Hal9000
View 4 Replies
View Related
Mar 18, 2008
I have an already published application running several MS SQL Server 2000 Reporting Services report.
I need a way to find from either the reporting services log or the application server (IIS) logs or windows log
to know the frequency of each report being used.
Based on this info, the business needs to know which reports are being used and to what extend?
How can I acheive this?
I have already got the IIS logs and it did not give the required info.
I have looked into the Reporting Services logs but it does not provide the info either.
Any help is appreciated
View 2 Replies
View Related
Mar 18, 2008
I have an already published application running several MS SQL Server 2000 Reporting Services report.
I need a way to find from either the reporting services log or the application server (IIS) logs or windows log
to know the frequency of each report being used.
Based on this info, the business needs to know which reports are being used and to what extend?
How can I acheive this?
I have already got the IIS logs and it did not give the required info.
I have looked into the Reporting Services logs but it does not provide the info either.
Any help is appreciated
View 1 Replies
View Related
Jan 23, 2007
Hi does anyone know how to do the above with out going through reportserver url?
Preferably by using a cmd tool ? such rs.exe
or through the backend in the reportserver DB?
Thanks
Dave
View 2 Replies
View Related
Feb 13, 2008
Hi Friends,
Could I migrate the reports which are developed on SQL 2000 to SQL 2005. If Yes then How ...
Could anyone explain me. How it works.
Thanks
sqlferns
View 2 Replies
View Related
Mar 27, 2008
My issue is with converting multi-value parameters:
In Crystal Reports, you can set a parameter to accept multiple vales (Discrete, Range or Discrete and Range).
As an example:
I have a database table with a column called ID.
I can create a parameter called param_id and set the options of the parameter to "Allow multiple range values".
With this setup, I can limit the result set of the report by comparing the param_id parameter to the ID column in the database. Because param_id is a multi-value range parameter, I can pass it the following data:
1 - 50
60 - 80
150 - 127
This will only return results within those ranges.
Does anyone know if SSRS provides this kind of functionality?
Thanks,
Patrick Conway
View 9 Replies
View Related
Aug 7, 2007
Is there a way to copy reports from other users "My reports" folder? I am logging onto the management studio reporting services using an administrative account and I am able to view the reports from all users' "My Reports" folder. But I am not able to export them as an rdl file. I am able to export reports from other common folders, but not from the "My Reports" folder.
The reason I need to do this is some of the users have created some reports in one environment and the reports are available in their respective "My Reports" folder. I need to move these reports to their corresponding "My Reports" folder in another environment.
Is there a way to do this?
Thanks for your help.
View 3 Replies
View Related
Mar 12, 2008
Hi all,
From the "How to Call a Parameterized Stored Procedure by Using ADO.NET and Visual Basic.NET" in http://support.microsft.com/kb/308049, I copied the following code to a project "pubsTestProc1.vb" of my VB 2005 Express Windows Application:
Imports System.Data
Imports System.Data.SqlClient
Imports System.Data.SqlDbType
Public Class Form1
Private Sub Form1_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
Dim PubsConn As SqlConnection = New SqlConnection("Data Source=.SQLEXPRESS;integrated security=sspi;" & "initial Catalog=pubs;")
Dim testCMD As SqlCommand = New SqlCommand("TestProcedure", PubsConn)
testCMD.CommandType = CommandType.StoredProcedure
Dim RetValue As SqlParameter = testCMD.Parameters.Add("RetValue", SqlDbType.Int)
RetValue.Direction = ParameterDirection.ReturnValue
Dim auIDIN As SqlParameter = testCMD.Parameters.Add("@au_idIN", SqlDbType.VarChar, 11)
auIDIN.Direction = ParameterDirection.Input
Dim NumTitles As SqlParameter = testCMD.Parameters.Add("@numtitlesout", SqlDbType.Int)
NumTitles.Direction = ParameterDirection.Output
auIDIN.Value = "213-46-8915"
PubsConn.Open()
Dim myReader As SqlDataReader = testCMD.ExecuteReader()
Console.WriteLine("Book Titles for this Author:")
Do While myReader.Read
Console.WriteLine("{0}", myReader.GetString(2))
Loop
myReader.Close()
Console.WriteLine("Return Value: " & (RetValue.Value))
Console.WriteLine("Number of Records: " & (NumTitles.Value))
End Sub
End Class
//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
The original article uses the code statements in pink for the Console Applcation of VB.NET. I do not know how to print out the output of ("Book Titles for this Author:"), ("{0}", myReader.GetString(2)), ("Return Value: " & (RetValue.Value)) and ("Number of Records: " & (NumTitles.Value)) in the Windows Application Form1 of my VB 2005 Express. Please help and advise.
Thanks in advance,
Scott Chang
View 29 Replies
View Related
Oct 29, 2013
I have a SSRS report with four parameters,and I want to be able to enter information for two of the parameters and run the report opposed to all four of them. However, when I select allow blanks and only select the parameters that I want to run the report by, the report come back blank..Essentially, I want to be able to the run report by different parameters without having to enter information for all parameters at the same time.
View 2 Replies
View Related
Dec 31, 2007
Hi all,
I have two problems.
1. I downloaded ChartFXRSTrial and created one chart, and able to deploy it in ReportServer, but the problem is the reports are not showing there, i checked the configuration of .dll files in the help provided by chartFX, but couldn't get anything, so could help me on this.
2. How to give Tooltip for the X- axis or Y- axis values in the ReportServer , i tried using chartproperties of .rdl file, but didnt understand it. can help me on this, and one more i tried with Dundas too, If im giving tooltip as #valy then, it is showing samething in reportserver instead the values of 'Y-axis'.
Thanks,
Mahesh Manthena
View 1 Replies
View Related
Jun 5, 2007
Dear Developres,
Actually I'm on the half way of making a portal and I get some problem I need your kindly helps.
at first I use the membership feature of ASP.net 2.0 to have login and all so by default it has generate an ASPNETDB.MDF file which its is (Microsoft SQL Server Database File (SqlClient)) and also I have two more databases one for file managemnet and one for Calander and Contacts but I need all to be one so whenevr one user can login it can show his own file in his page but now everyone can see all,Can anybody guide me should it all be in one database and if yes how can I connect all since one is generated by default by Visual studio2005.Should I use a Microsoft SQL Server (SqlClient)???
Thanks in advance.
View 5 Replies
View Related
Oct 22, 2007
Hi all,
I need some help in combining two results. I am using the Northwind Database and the Orders Table. The first select outputs the table shown below, Table 1 and the second select outputs the result in the second table Table 2. How can I combine these two to get the third table, Table 3 ?
SELECT TOP 100 PERCENT EmployeeID, COUNT(ShipVia) AS CountShipVia1
FROM dbo.Orders
WHERE (ShipVia = 1)
GROUP BY EmployeeID
ORDER BY EmployeeID
Table 1 Results
EmployeeID CountShipVia1
1
82
2
71
3
81
4
116
5
29
6
48
7
44
8
75
9
29
SELECT TOP 100 PERCENT EmployeeID, COUNT(ShipVia) AS CountShipVia2
FROM dbo.Orders
WHERE (ShipVia = 2)
GROUP BY EmployeeID
ORDER BY EmployeeID
Table 2 results
EmployeeID CountShipVia2
1
44
2
36
3
45
4
70
5
15
6
25
7
24
8
48
9
19
Table 3 the desired result:
EmployeeID CountShipVia1 CountShipVia2
1
82 44
2
71 36
3
81 45
4
116 70
5
29 15
6
48 25
7
44 24
8
75 48
9
29 19
thanksrobby
View 5 Replies
View Related
Nov 22, 2003
hello everyone
there is a smalllll problem facing mee...well i want to combine the result of 2 queries together
, the queries are :
select x1,x2,x3 from Table1 inner join Table2 on Table1.x1=table2.y inner join table3 on table1.2 = table3.z where table1.anything = 5
and the other query
select x1, x2 from Table1 where table1.anything = 5
is there anyway????
Thank you
View 2 Replies
View Related
May 9, 2004
Hello everyone,
I'm having problems transfering data. I don't even know if this is even possible, but this is what I'm trying to do. I have two tables: ZipRegionUps, ZipRegionUsps. Both tables have the same two columns: Zip, Region.
I want to combine the two. Having one table ZipRegion with three columns: Zip, UpsRegion, Usps Region. I've tried everything I can think of, but no luck. Here's the most sensible Stored Procedure I have tried:
If I wasn't very clear with my explanation, I'm hoping the procedure will clear things up:
CREATE PROCEDURE CMRC_Databases_DataTransfer
AS
DELETE FROM CMRC_ZipRegionTest
INSERT INTO CMRC_ZipRegionTest
(
Zip,
UpsRegion,
UspsRegion
)
SELECT
CMRC_ZipRegionUps.Zip,
CMRC_ZipRegionUps.UpsRegion,
CMRC_ZipRegionUsps.UspsRegion
FROM
CMRC_ZipRegion,
CMRC_ZipRegionUsps
GO
Is there any way to do this? Or do I have to manually enter all the entries?
Any help would be great. Thank you.
-Alec
View 1 Replies
View Related
Jan 23, 2006
I have a transactions table that stores prices for products bought and sold.
If I want average buying prices I use:
SELECT AVG(price), product FROM transactions WHERE transactiontype=1 GROUP BY product
and for selling prices:
SELECT AVG(price), product FROM transactions WHERE transactiontype=2 GROUP BY product
Is there a way to combine this into one SQL query, to create one bindable dataset ?
View 2 Replies
View Related
