Combining Multiple Queries From Same Table
Oct 17, 2013
I have 3 queries pulling from the same table, trying to define a count on each criteria. I have the data pulling, but the data is in multiple rows. I want the data in one row with all the counts in each separate columns. Also I need to setup a flag if a client purchased and order within 30 days from their last purchase.
I am doing this select for each credit card, check and cash purchases. I do not know how to setup a flag where the client may have ordered and paid by check or cash after 30 days from a credit card purchase. Is this something that can be done?
select
clientnumber,count(distinct clientnumber) as cccnt,
0 as ckcnt, 0 as cacnt
from dbo.purchases
where orderdate >= 20120101 and orderdate <= 20121231 and
payment_type = 'CC'
group by clientnumber;
OUTPUT currently looks like this:
1234 2 0 0
1234 0 1 0
1234 0 0 4
Is it possible to result in this, along with a flag with the criteria above?:
1234 2 1 4 Y
View 3 Replies
ADVERTISEMENT
Nov 20, 2015
I have to run this 3 times for similar but slightly different parameters. I only change the very top peice of code slightly each time:
1. Partition by Forename, Surname, DOB, Postcode
2. Partition by Forename, DOB, Postcode
3. Forename, Surname, DOB.
As you can see very subtle change, ideally I'd like to find a way to run just one report where all of the above occur, the issue I face running separately is one person may appear on 1 or more giving duplicates.
USE HealthBI_Views;this bit below is basically grouping my output on Forename, Surname, DOB & Postcode. What the whole process is trying to achieve is to show where a patient which has all of the above fields identical but has a different patient identifier suggesting that the service has allocated to unique identifiers to the same person which will result in both records needing to be merged.
WITH cte
AS (SELECT *,
COUNT(HEYNo) OVER (
PARTITION BY Forename, Surname,
DOB
[code]...
--- this bit below is simply showing all instances where the above criteria is met and there are more then one instances.WHERE countOfHeyNo > 1
--- The final output display all patient identifiable information from the MF_PATIENT table so that the report can be created in SSRS and run routinely by the Data Quality Team who can then investigate each occurance.
View 5 Replies
View Related
Nov 22, 2003
hello everyone
there is a smalllll problem facing mee...well i want to combine the result of 2 queries together
, the queries are :
select x1,x2,x3 from Table1 inner join Table2 on Table1.x1=table2.y inner join table3 on table1.2 = table3.z where table1.anything = 5
and the other query
select x1, x2 from Table1 where table1.anything = 5
is there anyway????
Thank you
View 2 Replies
View Related
Jan 23, 2006
I have a transactions table that stores prices for products bought and sold.
If I want average buying prices I use:
SELECT AVG(price), product FROM transactions WHERE transactiontype=1 GROUP BY product
and for selling prices:
SELECT AVG(price), product FROM transactions WHERE transactiontype=2 GROUP BY product
Is there a way to combine this into one SQL query, to create one bindable dataset ?
View 2 Replies
View Related
Apr 12, 2006
These similar queries do much the same thing: the first one gets a list of ticket ID's that have been bought as 'standalone' tickets by a particular user, along with the total quantity they purchased. The second one also gets a list of ticket ID's along with the quantity purchased by that user, but the list of ID's is driven by tickets that appear in their basket as part of packages, instead of standalone tickets.
I hope that's clear; if not, maybe the SQL will make it clearer:
SELECT
[tblTickets].[id] AS TicketId,
SUM([tblBasket].[ticket_quantity]) AS SingleTicketsTotal
FROM
[tblOrders]
INNER JOIN [tblBasket] ON [tblBasket].[order_id] = [tblOrders].[id]
INNER JOIN [tblTickets] ON [tblTickets].[id] = [tblBasket].[ticket_id]
WHERE [tblOrders].[id] IN (SELECT [id] FROM [tblOrders] WHERE [tblOrders].[user_id] = @userID AND ([tblOrders].[order_status]=@purchasedOrder OR [tblOrders].[id]=@currentSessionOrder))
GROUP BY [tblTickets].[id]
SELECT
[tblCombinations_Tickets].[ticket_id] AS cTicketId,
SUM([tblBasket].[ticket_quantity]*[tblCombinations_Tickets].[quantity]) AS PackageTicketsTotal
FROM
[tblOrders]
INNER JOIN [tblBasket] ON [tblBasket].[order_id] = [tblOrders].[id]
INNER JOIN [tblCombinations_Tickets] ON [tblCombinations_Tickets].[combination_id] = [tblBasket].[combination_id]
WHERE [tblOrders].[id] IN (SELECT [id] FROM [tblOrders] WHERE [tblOrders].[user_id] = @userID AND ([tblOrders].[order_status]=@purchasedOrder OR [tblOrders].[id]=@currentSessionOrder))
GROUP BY [tblCombinations_Tickets].[ticket_id]
I need to combine these. So that I get one result set with: ticketID, quantity bought as standalone, quantity bought as part of package.
I can't figure it out. I've tried inner joins, outer joins, left joins, right joins, nested subqueries and, briefly, banging on the screen. But every time, what happens is that I only get the rows where the ticket ID occurs in both queries. I need everything.
This has got to be laughably simple. But I'm stuck :( Can anyone help?
View 3 Replies
View Related
Jun 19, 2008
I need to combine two queries into one.
Query 1 (main query)
SELECT dbo.Job.CompanyJobId, dbo.Job.Name, dbo.Job.Name, dbo.Job.ChangeDate,
dbo.Job.Active,
sum(case dbo.SourceType.CompanySourceTypeId WHEN 'MA' then dbo.ProductionEvent.AlternateQuantity ELSE 0 END) AS material,
sum(case dbo.SourceType.CompanySourceTypeId WHEN 'PR' THEN dbo.ProductionEvent.Quantity ELSE 0 END) AS production
FROM dbo.job
left outer join dbo.Event ON dbo.Job.JobGuid = dbo.Event.JobGuid
left outer join dbo.ProductionEvent on Event.EventGuid = dbo.ProductionEvent.EventGuid
left outer join dbo.Product ON dbo.ProductionEvent.ProductGuid = dbo.Product.ProductGuid
left outer JOIN dbo.Item ON Event.ItemGuid = dbo.Item.ItemGuid
inner join dbo.Source ON dbo.ProductionEvent.SourceGuid = dbo.Source.SourceGuid
inner JOIN dbo.SourceType ON dbo.Source.SourceTypeGuid = dbo.SourceType.SourceTypeGuid
left OUTER JOIN dbo.Region ON dbo.Job.RegionGuid = dbo.Region.RegionGuid
WHERE dbo.Job.CompanyJobId = 3505048
and(dbo.SourceType.CompanySourceTypeId = 'PR' or dbo.SourceType.CompanySourceTypeId = 'MA')
GROUP BY dbo.Job.CompanyJobId, dbo.job.name, dbo.Job.ChangeDate, dbo.job.Name, dbo.Job.Active
Result
3505048
SR 434 T-5201SR 434 T-5201
2007-10-11 16:36:45.647
Y
1314.26 (material qty)
1569.26 (production qty)
(where 1314.26 is sum material and 1569.26 is production)
Query 2
selectsum(EmployeeLaborEvent.Hours) as hours
fromdbo.job
left outer join dbo.Event ON dbo.Job.JobGuid = Event.JobGuid
Left outer join dbo.EmployeeLaborEvent ON Event.EventGuid = dbo.Employeelaborevent.EventGuid
WHERE dbo.Job.CompanyJobId = 3505048
Result:
1647.50 (which are sum of hours, this figure is correct)
Now I try to merge query 2 into Query 1 like this:
SELECT dbo.Job.CompanyJobId, dbo.Job.Name, dbo.Job.Name, dbo.Job.ChangeDate,
dbo.Job.Active,
sum(case dbo.SourceType.CompanySourceTypeId WHEN 'MA' then dbo.ProductionEvent.AlternateQuantity ELSE 0 END) AS material,
sum(case dbo.SourceType.CompanySourceTypeId WHEN 'PR' THEN dbo.ProductionEvent.Quantity ELSE 0 END) AS production,
sum(EmployeeLaborEvent.Hours) as hours
FROM dbo.job
left outer join dbo.Event ON dbo.Job.JobGuid = dbo.Event.JobGuid
left outer join dbo.ProductionEvent on Event.EventGuid = dbo.ProductionEvent.EventGuid
left outer join dbo.Product ON dbo.ProductionEvent.ProductGuid = dbo.Product.ProductGuid
left outer JOIN dbo.Item ON Event.ItemGuid = dbo.Item.ItemGuid
inner join dbo.Source ON dbo.ProductionEvent.SourceGuid = dbo.Source.SourceGuid
inner JOIN dbo.SourceType ON dbo.Source.SourceTypeGuid = dbo.SourceType.SourceTypeGuid
left OUTER JOIN dbo.Region ON dbo.Job.RegionGuid = dbo.Region.RegionGuid
left outer join dbo.EmployeeLaborEvent ON Event.EventGuid = dbo.Employeelaborevent.EventGuid
WHERE dbo.Job.CompanyJobId = 3505048
and(dbo.SourceType.CompanySourceTypeId = 'PR' or dbo.SourceType.CompanySourceTypeId = 'MA')
GROUP BY dbo.Job.CompanyJobId, dbo.job.name, dbo.Job.ChangeDate, dbo.job.Name, dbo.Job.Active
When I run the query the result is:
3505048
SR 434 T-5201SR 434 T-5201
2007-10-11 16:36:45.647
Y
1314.26(material)
1569.26 (production)
NULL (hours)
The material and production stay the same (and is correct). Hours are wrong.
Any clues? Thank you.
View 4 Replies
View Related
Dec 18, 2006
Hi All,I have a problem with a table that I want to get nice data out of in asingle query. The guys here reckon it can't be done in a single querybut I wanted to prove them wrong !! Essentially, I want to get the samecolumn out of the single table, but in one case the column must have awhere clause associated with it, and the other case it does not have awhere clause...Lets say have a table like this :-date || user || transaction type || Amountso, each row contains a transaction type, and a corresponding amountfor this transaction.There can be any number of transactions (and transaction types) peruser per day.Here is what I want :I want to get one particular transaction type as a percentage of thetotal transactions : for example, a list of the % amount that Debittransactions have occurred for a user for a day, with respect to alltransactions that the user has done that day, so :Debits Jim performed on day 1 are 50% of all transactions he performedDebits Jim performed on day 2 are 55% of all transactions he performed... and so on.At the moment, I do this :select date, user, sum(amount) as debit_Amount where transaction_type='debit'group by date, userand dump that into tmp table Debitsthen I doselect date, user, sum(amount) as total_Amountgroup by date, userand dump this into tmp table Totalsand then I have to do a :SELECT Debits.User, (Debits.debit_Amount / Totals.total_Amount) asperc_Debit , Debits.dateFROM Debits, TotalsWHERE Debits.date = Totals.date AND Debits.User = Totals.UserCan anyone suggest a way of doing this without the need for thesetemporary tables???Thanks!
View 7 Replies
View Related
May 13, 2008
can someone assist me in joining the two queries together into 1
so that I can get one result set
---------------------------------------------------------
SELECT count(ee_occup_levels) AS OcpLvl, ee_occup_levels AS [Occupation Levels], headcount
FROM headcountdec
WHERE period = 'March 2008' AND headcount ='NewHires' AND staffno IS NOT NULL AND ee_occup_levels is not null
GROUP BY ee_occup_levels, race, gender, headcount
ORDER BY gender, Race, ee_occup_levels, headcount
select count(headcount + headcount) AS Transfares
from headcountdec
where Period = 'March 2008' AND headcount IN ('TransferOut', 'TransferIn')
View 1 Replies
View Related
May 4, 2005
I have created a search interface for a large table and I allow users to search on keywords. The users can enter multiple keywords and I build a SQL based on their input to search a full-text indexed table. However the users want to be able to search like an old system they had, where they enter single words and then combine their searches to drill-down into the results. What would be the best method to combine searches?At the moment I can create a merged query from 2 queries if they have searched using single words, but I know down the line it will get far more complicated if they keep combining and merging even with multiple word entries. Each time they search I store the 'where' section of each query, then if they choose to combine I have a function to build a new query through arrays (to eliminate duplicates and sort etc)Is there a better way in SQL to combine queries as sometimes the logic of the combined query means no results are returned (because of OR/ AND conditions in the wrong places etc)e.g.1. Select count(ID) as myCount FROM myTable where (CONTAINS(title,'"run"') OR CONTAINS(subject,'"run"'))2. Select count(ID) as myCount FROM myTable where (CONTAINS(title,'"level"') OR CONTAINS(subject,'"level"'))Combined using my function creates:Select count(ID) as myCount FROM myTable where (contains(title,'"level"') AND contains(title,'"run"')) OR (contains(subject,'"level"') AND contains(subject,'"run"'))
When I combine I'm drilling down, so if the first query returns a count of 400 (where the title OR subject contains 'run') and then the second query returns 600 records (where the title OR subject contains 'level') I need to combine so that I'm looking for records where the title contains both keywords 'run' AND 'level' OR else the subject contains both 'run' AND 'level' and I end up with say 50 records where the title has both keywords OR the subject holds both words. I think the main trouble lies if they try combine a previously combines search with a new search. here my logic gets totally thrown and I'm not sure how to handle soemthing like this. Has anyone got any ideas or experience with this kind of functionality? In SQL or even in vb.net is there a method to combine searches easily?
View 1 Replies
View Related
Jan 4, 2015
I was messing around with stored procedures and I was wondering if creating a SP that populates a single table for reporting is a good idea?
I have ~10 queries that I have to currently run manually and was hoping to drop them into a physical table and then leverage that single table to pull into excel.
Some of my queries use virtual tables or CTE's, this is to get the aggregate set correctly.
Essentially I am working out of a data warehouse and would like to eventually get all my queries in one SP or something similar and then call that query for a insert.
Speaking of which could you create a SP that has several selects than with that output drops the records into a single table by using an insert into query so the data from the all the queries would line up into the right columns?
View 1 Replies
View Related
Nov 21, 2007
Can someone please help me modify the following pivot query into an INSERT INTO query (i.e. results are exported into a new table)...
SELECT RespondantID, [1] As Q1, [2] As Q2, [3] As Q3, [4] As Q4, [5] As Q5, [6] As Q6, [7] As Q7, [8] As Q8, [9] As Q9, [10]
As Q10 FROM (SELECT RespondantID, QuestionID, Answer FROM [3_Temp]
WHERE SurveyID=1) AS preData PIVOT
( MAX(Answer) FOR QuestionID IN ([1], [2], [3], [4], [5], [6], [7], [8], [9], [10]) )
AS data
ORDER BY RespondantID
Thanks,
Martin
View 1 Replies
View Related
Apr 3, 2008
I have two queries that I'm trying to combine, but can't figure out how to combine them ... successfully!?! The first query is pretty simple in that I'm looking at several fields from two different tables, no big deal.
The second query calculates the years, months, days between two dates that are used in the first query. I'm stumped on how to combine the queries so that they place nice with each other and return results.
I will post my feable attempt at merging them. No matter how I order the code, I continue to get the same error, pertaining to the last line of code ... Line 73: Incorrect syntax near 'vpi'.
Any help would be greatly appreciated! Thank you! Jena
select
RTRIM(RTRIM(vpi.LastName) + ', ' + RTRIM(ISNULL vpi.FirstName,''))) Employee,
convert(varchar,vpi.FromEffectiveDate,101) PositionStart,
convert(varchar,vpi.ToEffectiveDate,101) PositionChange,
convert(varchar,vpi.PositionStartDate,101) PositionStartDate,
datediff(hour,vpi.FromEffectiveDate,vpi.ToEffectiveDate) as time_diff,
vpi.PositionReason, vpi.PositionCode, vpc.PositionCodeDescription
from
(
select [Age] = convert(varchar, [Years]) + ' Years ' +
convert(varchar, [Months]) + ' Months ' +
convert(varchar, [Days]) + ' Days',
*
from
(
select
[Years] = casewhen BirthDayThisYear <= Today
then datediff(year, BirthYearStart, CurrYearStart)
else datediff(year, BirthYearStart, CurrYearStart) - 1
end,
[Months]= casewhen BirthDayThisYear <= Today
then datediff(month, BirthDayThisYear, Today)
else datediff(month, BirthDayThisYear, Today) + 12
end,
[Days]= casewhen BirthDayThisMonth <= Today
then datediff(day, BirthDayThisMonth, Today)
else datediff(day, dateadd(month, -1, BirthDayThisMonth), Today)
end,
Birth = convert(varchar(10) ,Birth, 121),
Today = convert(varchar(10), Today, 121)
from
(
selectBirthDayThisYear =
casewhenday(dateadd(year, datediff(year, BirthYearStart, CurrYearStart), Birth)) <> day(Birth)
thendateadd(day, 1, dateadd(year, datediff(year, BirthYearStart, CurrYearStart), Birth))
elsedateadd(year, datediff(year, BirthYearStart, CurrYearStart), Birth)
end,
BirthDayThisMonth =
case when day(dateadd(month, datediff(month, BirthMonthStart, CurrMonthStart), Birth)) <> day(Birth)
thendateadd(day, 1, dateadd(month, datediff(month, BirthMonthStart, CurrMonthStart), Birth))
elsedateadd(month, datediff(month, BirthMonthStart, CurrMonthStart), Birth)
end,
*
from
(
selectBirthYearStart = dateadd(year, datediff(year, 0, Birth), 0),
CurrYearStart = dateadd(year, datediff(year, 0, Today), 0),
BirthMonthStart = dateadd(month, datediff(month, 0, Birth), 0),
CurrMonthStart = dateadd(month, datediff(month, 0, Today), 0),
*
from
(
select
birth = convert(datetime, fromeffectivedate) ,
Today = case when convert(datetime, toeffectivedate) = '3000-01-01'
THEN convert(datetime, convert(int,getdate()))
else toeffectivedate
end, *
from vHRL_PositionInfo
) aaaa
) aaa
) aa
)a
) vHRL_PositionInfo vpi inner join position_codes vpc on vpi.PositionCode = vpc.PositionCode
View 2 Replies
View Related
Apr 29, 2015
I have these two CTE queries, the first one is the existing one which runs fine and returns what we need, the second is a new CTE query which result I need to join in to the existing CTE, now that would be two CTE's can that be done at all?The second query is working on the same table as the first one so there are overlaps in names, and they are the same, only columns I need to "join" is the "seconds" and "AlarmSessions".
;with AlarmTree as (
select NodeID, ParentID, NodeLevel, NodeName,
cast('' as varchar(max)) as N0,
cast('' as varchar(max)) as N1,
cast('' as varchar(max)) as N2,
cast('' as varchar(max)) as N3,
[code]....
View 4 Replies
View Related
Apr 4, 2006
Hello. I'm having some difficulty trying to output the results of two seperate queries into the same temporary table.
Does anyone know if it is possible to use the UNION operator to output the results into a temporary table?
Select * From TableA
UNION
Select * From TableB
<---output result to temporary table here--->
Alternatively, is it possible to output the results of two queries in to the same temporary table without the UNION clause?
The following statement fails on the second SELECT INTO due to the fact that #MyTempTable already exists.
Select * INTO #MyTempTable FROM TableA
Select * INTO #MyTempTable FROM TableB
Thanks in advance.
View 2 Replies
View Related
Mar 5, 2012
Customers order a product and enter in a source code (sourceCd). This sourceCd is tied to a marketing program. Idea being we can see that 100 customers ordered from this promo, 200 from this catalog, etc etc. The sourceCd that a customer enters is not always accurate so there is a magic process that adjusts this OrigSourceCd into a final SourceCd, that may or may not be the same.
I am trying to generate a result set of customer count by sales program based on both the original and final source code. Problem is, I have to do each query separately because in one, I have to join SourceCdKey to SourceCdKey to get the program associated with that SourceCd and in the other i have to join OrigSourceCdKey to SourceCdKey to get the program associated with the original sourceCd. There are some programs is one results set that are not in the other, and vice versa.
I'm trying to generate a list of that shows customer counts before and after for each program, some which may be null for one, but have counts for the other. I have tries creating 2 separating views and joining them but that doesn't work because it only returns the ones they have in common.
View 6 Replies
View Related
May 20, 2015
I have 2 DBs located on separate Sql Servers but the DBs are linked. I am querying data from both DBs but want to combine the results. Here is my query but it doesn't seem to be working.
(SELECT DISTINCT
idname, name, address, address2, awardedtoname, suppno
FROM contract INNER JOIN
house ON contract.idname = house.idname)
JOIN
(SELECT DISTINCT
tpd.PropertyNumber AS [Property No], tpd.Address1 + ' , ' + tpd.Address2 AS Estate, tpd.Address1 AS Address1,
[Code] ....
How I could combine the results?
View 9 Replies
View Related
Mar 5, 2008
I'm having difficulty coming up with the right syntax for a query. Suppose I have a database containing a Stores table, an ProductInventory table, and a Customers table. The Stores table has an ID field that serves as a foreign key in both the ProductInventory table and in the Customers table. I'm trying to write a query that, for each Store record, will return the total number of records in the ProductInventory table and the total number of records in the Customers table.
The following query returns, for each store, the total number of records in the ProductInventory table:
SELECT Stores.Name,
COUNT(ProductInventory.ID) AS ProductInventoryItemCount
FROM Stores
LEFT JOIN ProductInventory ON Stores.ID = ProductInventory.StoreID
GROUP BY Stores.Name
The following query returns, for each store, the total number of records in the Customers table:
SELECT Stores.Name,
COUNT(Customers.ID) AS CustomerCount
FROM Stores
LEFT JOIN ProductInventory ON Stores.ID = Customers.StoreID
GROUP BY Stores.Name
I combined the two queries:
SELECT Stores.Name,
COUNT(ProductInventory.ID) AS ProductInventoryItemCount,
COUNT(Customers.ID) AS CustomerCount
FROM Stores
LEFT JOIN ProductInventory ON Stores.ID = ProductInventory.StoreID
LEFT JOIN Customers ON Stores.ID = Customers.StoreID
GROUP BY Stores.Name
When I run this last query, however, I get an "Arithmetic overflow error converting expression to data type int" error. Using COUNT_BIG instead of COUNT eliminates the error, but the numbers that are generated are astronomical in size. This indicates to me that there is a *lot* more table joining going on than I expected
What is the correct syntax to produce the desired results? I have a few other tables similar to ProductInventory and Customers; I'm hoping to extend the correct syntax so as to be able to get a comprehensive record count list for each store. Thanks for your help!
View 7 Replies
View Related
Mar 6, 2006
Hey guys, here is my issue, i'm trying to combine multiple columns of data into one row. For example, I have a temp table:
create table #Custom_Address
( patient_idchar(10)null,
episode_idchar(3)null,
custom_address varchar(100) null
)
As you can tell, the 'custom_address' column is going to house the results of the combination.
I am trying to INSERT (combine) using this statement:
INSERT #Custom_Address
select cm.patient_id, cm.episode_id, (cc.coverage_plan_add1 +' ' + coverage_plan_add2 + ' ' + coverage_plan_city+ ' ' + coverage_plan_st+ ' ' + coverage_plan_zip) as custom_address
FROM #ClaimMaster cm join Coverage_Custom cc on cm.patient_id = cc.patient_id and cm.episode_id = cc.episode_id
WHEREcc.coverage_plan_add1 > 0
OR cc.coverage_plan_add2 > 0
OR cc.coverage_plan_city > 0
OR cc.coverage_plan_st > 0
OR cc.coverage_plan_zip > 0
GROUP BY cm.patient_id, cm.episode_id
I want to insert the patient_id, episode_id, and then combine the 'cc.coverage_plan_add1 +' ' + coverage_plan_add2 + ' ' + coverage_plan_city+ ' ' + coverage_plan_st+ ' ' + coverage_plan_zip' data to represent my "custom_address" column and only when there is data in those columns.
Then I do my update:
UPDATE#ClaimMaster
SET #ClaimMaster.custom_address = ca.custom_address
FROM #ClaimMaster
JOIN#Custom_Address ca on #ClaimMaster.patient_id = ca.patient_id and #ClaimMaster.episode_id = ca.episode_id
However, when I do this, it says my 'cc.coverage_plan_add1 + etc' columns are invalid because they are not contained in either an aggregate function or a GROUP By clause.
If i'm combining all the data to represent a single column, how do I format my group by clause? Or is my entire INSERT statement wrong?
As a side note, my #ClaimMaster table is another temp table, but the problem is not in there.
View 5 Replies
View Related
Feb 13, 2007
I have data that looks like this:
ID Value
1 Descr1
1 Descr2
1 Descr3
where Descr could range from 1 to 100 for each ID
The result set I need is:
Descr1,Descr2,Desc3...etc.
Does someone have a query to do this?
Thank you
View 8 Replies
View Related
Dec 19, 2014
I have data that looks like this:
Cus_no Inv_No Trans_type Amt_Inv Amt_Paid
100 12345 Other 0 -21.76
100 12345 Discount 0 -6.39
100 12345 Discount 6.39 6.39
100 12345 Discount 21.76 21.76
100 12345 Sales Inv 218.99 218.99
What I would like to do is a select statement that returns:
Cus_no Inv_no Amt_Inv Amt_Paid Disc_amt Other
100 12345 247.14 218.99 -6.39 -21.76
I've tried something like this but since I'm referencing trans_type I get a message that trans_type must be in Group by. doing that give me multiple records.
select cus_no, Inv_no, Sum(Amount_Invoiced_DC) AS InvAmt,
case trans_type when 'Sales Inv' then sum(Amount_Paid_DC) else 0 end as AmtPaid,
case when trans_type = 'Discount' and sum(Amount_Paid_DC)<0 then sum(Amount_Paid_DC) else 0 end as DiscountAmt
FROM BI50_BankTransactions_AR_InvcDt_H
where cus_no is not null
group by cus_no, Inv_no
View 2 Replies
View Related
May 4, 2007
Hii all.
quite urgent... I have 3 matix tables.. all the same row headings. I need to be able to make these visible/invisible depending on the user parameters. The reason for this, if a user hides table on the left.. the middle table needs to show the row headings. and last table must not.
The problem:
When making the row headings invisible it doesnt exactly chop off the textboxes... so the tables look disjoint.. and a big gap appears between both tables...
Is there a way to join these tables without leavings gaps ?
any help is appreciated.
Neil
View 7 Replies
View Related
May 16, 2008
Hi,
I'm trying to do this in T-SQL. I have a query that returns, for this matter, only 2 rows. The table output looks like this:
AdjType
AdjNbrStart
AdjNbrEnd
AdjTotalAmt
1
9
9
-134180
2
8
10
104981.42
How do you do it to bring back only one row that will look like so:
1
9
9
-134180
2
8
10
104981.4
Is it possible? Like I said, I only have 2 rows. I'm not concatenating these columns, just want to bring it back as one row. Any ideas? Thanks.
View 1 Replies
View Related
Apr 7, 2008
OK I have 4 differant Data Sources... One being a count of one DB, another count of another DB, another count of another and then another process from a script component. Each source returns 1 row of data with 1 column each except the Script Component. It returns 3 columns... Now I need to take each of the row's returned and combine them to a single row (line) and inset them into another table just as one single eatry. I am using a Union All and when it runs I see the 4 Data Sources say 1 Row... But after it hits the Union All it does 4 rows... What am I doing wrong or am I using the wrong component? Please if anyone can help that would be wonderful.
View 10 Replies
View Related
Jul 27, 2007
I was wondering if it's possible to have a stored procedure that has two select statements which you can combine as a single result set. For instance:select name, age, titlefrom tableaselect name, age, titlefrom tablebCould you combine these queries into a single result set?
View 2 Replies
View Related
Nov 21, 2007
Hi,
I am trying to combine information from two or more records into one and I am completely stuck on a solution for my problem so I hope there is someone out there who can help me.
My table looks like this:
ID - DayNr - Transportation - TransOrder - Route
25 - 1 - Car - 1 - Text A
25 - 1 - Train - 1 - Text B
25 - 1 - Train - 2 - Text C
25 - 7 - Train - 1 - Text D
25 - 7 - Train - 2 - Text E
I want to combine all Route - information belonging to the same combination of ID & DayNr & Transportation into one new record. The result should look like:
Column 1 - Column 2
25/1/Car - Text A
25/1/Train - TextB;TextC
25/7/Train - TextD;TextE
I have tried Coalesce-statements and Cursor-solutions but until now everything I tried didn't work. Ideas anyone?
Thanks.
RMG
P.S. ID is not my primary key and doesn't have to be unique
View 14 Replies
View Related
Dec 20, 2007
Hi All,
I'm trying to develop a query that joins one record from a table with multiple matching records from another table all in one record,
Table1 has the primary key
id
--
1
2
3
4
Table2 has the follwing records
id year subject
-----------------
1 2000 English
1 2002 French
2 2004 English
2 2005 English
2 2006 English
3 2007 French
I want the result to be like this
id 2000 2001 2002 2003 2004 2005 2006 2007
-----------------------------------------------------------
1 English null French null null null null null
2 null null null null English English English null
3 null null null null null null null English
Appretiate your assistance
View 4 Replies
View Related
Jul 30, 2007
I have a table employee: that contains one column and three rows. How can I transform it using SELECT to display only one row and one column, with comma delimited strings: John, Mike, Dale?
Employee Name
John
Mike
Dale
View 5 Replies
View Related
Nov 21, 2007
Hi,
I am trying to combine information from two or more records into one and I am completely stuck on a solution for my problem so I hope there is someone out there who can help me.
My table looks like this:
ID - DayNr - Transportation - TransOrder - Route
25 - 1 - Car - 1 - Text A
25 - 1 - Train - 1 - Text B
25 - 1 - Train - 2 - Text C
25 - 7 - Train - 1 - Text D
25 - 7 - Train - 2 - Text E
I want to combine all Route - information belonging to the same combination of ID & DayNr & Transportation into one new record. The result should look like:
Column 1 - Column 2
25/1/Car - Text A
25/1/Train - TextB;TextC
25/7/Train - TextD;TextE
I have tried Coalesce-statements and Cursor-solutions but until now everything I tried didn't work. The big issue here is that I have to base my concatenation on 3 columns. Ideas anyone?
Thanks.
RMG
P.S. ID is not my primary key and doesn't have to be unique
View 1 Replies
View Related
Mar 21, 2006
Hello again,
Another combining multiple rows teaser, during a few routines I made a mistake and I would like to combine my efforts. Here is my data:
Code:
Table A
ID DSN VN AX Diag
1111296.54
3212318.00
Both DSNs share the same Patient_id in a seperate table which holds the DSN numbers and their corresponding patients.
Code:
Table B
DSN Patient_id
100000001
200000001
So what I need to do is maintain their unique 'ID' number in Table A but update their DSN numbers to reflect the first instance in Table B. So my data would look like this in both tables.
Code:
Table A
ID DSN VN AX Diag
1111296.54
3112318.00
Note: The second rows DSN changed to 1 from 2
Code:
Table B
DSN Patient_id
100000001
(Duplicate row removed with same patient_id)
The result would look like the above but as you noticed I need to remove the duplicate row that had the different DSN in Table B so that only one DSN remains that can map to multiple rows (IDs) in Table A.
Table A:
DSN can map to multiple rows (IDs)
IDs must be unique (aka kept to what they are currently)
Table B:
Second row with same DSN must be removed.
Any takes, ideas? I need to do this on a couple thousand rows....
Thanks, and im happy to clarify if needed.
View 1 Replies
View Related
Apr 3, 2014
I'm working on a project where I need to retrieve employees data and then combine the data into single row per employee.
Sample Data:
WITH SampleData (PERSON, [DATA], [FIELD]) AS
(
SELECT 1234,'04/02/2014','Date'
UNION ALL SELECT 1234,'123','Department'
UNION ALL SELECT 1234,80.0,'Rate'
)
SELECT *
FROM SampleData;
The results from the above are as follows:
PERSONDATA FIELD
123404/02/2014Date
1234123 Department
123480.0 Rate
The desired results would be:
PERSONDate Department Rate
123404/02/2014 123 80.0
View 7 Replies
View Related
Feb 4, 2015
How I could accomplish taking several rows for one account and concatenate them into one row, for example I have account_num, invoice_date, transaction_num, msg_counter,Message_2,SQL_LAST_UPDATE the special characters &,",!,$,# are used to determine the Message_2 content for a given account_number that are supposed to be together.
I am needing to put all of that accounts_messages in one row to display on a report, the table I am pulling this data from only has a varchar(40) for the message_2, a proprietary source so can't change that length, "I'VE ASKED THEM TO DO THIS, AND THEY REFUSED". So my only option is to insert this data into my table and create a single Message_2 for that account.
00000000332015-01-16 10:09:43.00000&19 confirmation so 2015-01-19 15:34:59.000
00000000332015-01-16 10:09:43.00000"19ACCT 186743. HE SAID RADIO HAD 2015-01-19 15:34:59.000
00000000332015-01-16 10:09:43.00000!19CALLED Carl ABOUT DEACTIVATION OF RADIO 2015-01-19 15:34:59.000
00000000332015-01-16 10:09:43.00000$19FFERENT ACCT # YEARS AGO, BUT 2015-01-19 15:34:59.000
00000000332015-01-16 10:09:43.00000'19I can cancel the (0.00) billing line on 2015-01-19 15:34:59.000
[Code] ....
View 7 Replies
View Related
Oct 14, 2015
Curious what the industry standard is combining multiple instances on single server ?
Right now i have separate servers for OLTP, SSAS, and SSIS, and for OTP have Development, Test, and production environments. Im considering combining the SSIS and SSAS services into additional instances on each environment servers.
Now (Production)
OLTP
SSAS
SSIS
After
1 Server with 3 separate instances for SSAS, SSIS, OLTP. Then replicate this model through the environments to utilize development and testing.
View 2 Replies
View Related
Oct 2, 2006
The goal is to produce a single PDF consisting of a number of subreports. Some are landscape, others are portrait. The subreports may also be run as independent reports. The master report that contains them defaults to the width of the widest subreport, which is landscape. This causes all portrait subreports to spill over producing blank pages. Are there any work-arounds to concatenate multiple, single report PDFs into a single PDF and have page numbering too?
Thanks!
View 11 Replies
View Related
