What does it mean when you have a querey like this
Update tblWatchInstance SET [NewInvoiceGen] = '1' Where tblWatchInstance.WatchID = '%" & txtWatchID.Text & "%'"
But when you run in the Qanalyzer it says 0 rows effected...why is that??? could it be something i am missing.....
Hi,
In a procedure I want to know the no. of rows effected.
That means. No of rows inserted, updated , and no of records retrieved by an SQl statement.
Is there any way to know.
Thanks
Sreenu
This was a usual day today in office and i was working on a requirement in which i was needed to fetch the total number of rows effected by an update query, so I asked my best code mate "Google" and to my surprised there was not enough correct answers at least the one i was looking for.There were suggestions that you can use a select statement for the updated rows and make it like a select (count) which works fine, but just looking into the SQL server books online, it shows that there is even a better way to do it.After the update statement in my stored procedure i used "@@ROWCOUNT" with a select statement and it works like a charm.so the little find for my first ever post on asp.net is that there is a better way to find the total updated rows by a query Example: DB: Northwind , Table Employeesupdate employees set extension='1234'select @@ROWCOUNT This will return 9 (default rows in this table) as the rows effectedHope this helps
View 2 Replies View RelatedHello SQL Knowledgeable Crowd,
I'm trying to install SQL Server 2005 from the command line without using an .ini file and without having IIS installed. I know that I need to pass all the parmeters and I think I have them all.
My .bat file will install when IIS is installed, but I can not get it to install without IIS. The GUI gives me a warning and allows me to ignore this, but I can't figure out the switch that will do the same thing.
Can someone please point out my mistakes.
Here are my command line parameters:
(Win 2k3 x64, SQL2005 Enterprise)
"P:SoftwareMicrosoftSQL Server 200564-bitEnterpriseCD1setup.exe" /qn
INSTANCENAME="MSSQLSERVER" ADDLOCAL=SQL_Engine,SQL_Data_Files,SQL_FullText,Notification_Services,NS_Engine,NS_Client,SQL_DTS,Client_Components,Connectivity,SQL_Tools90,SDK,SQL_Documentation,SQL_BooksOnline,SQL_Samples,SQL_AdventureWorksSamples,SQL_AdventureWorksDWSamples,SQL_AnalysisServiceSamples,SQL_Samples
PIDKEY=
SAPWD="NT AUTHORITY"
SQLACCOUNT="NT AUTHORITY"
AGTACCOUNT="NT AUTHORITY"
RSACCOUNT="NT AUTHORITY"
SQLBROWSERACCOUNT="NT AUTHORITY"
SQLAUTOSTART=1
AGTAUTOSTART=1
ASAUTOSTART=1
RSAUTOSTART=1
I am trying to install SQL Server 2005 using command prompt. I have gotten the latest download. My question is what is the commad prompt for the tag ADDLOCAL for SQL Server Management Studio Express. For SQL Server datatbase it is called SQL_Engine. In the same way what should I be using for "SQL Server Management Studio Express". I want to limit the choices that are installed on the user machines.
Any help is greatly appreciated.
Thanks,
Mahesh
I need an SQL query to get all tables in DB effected in last 15 minutes.
Effected in terms of insert/delete/Update
My actual data is a bit more complicated, and uses fact and dimension tables, but I simplified it here.
I'm trying to build a chart that will compare sales of a single store to regional and national sales. The measures look like this:
Sales = SUM(FactTable[Net Sales])
Regional Sales = CALCULATE([Sales], ALL(FactTable[Store Number]))
National Sales = CALCULATE([Sales], ALL(FactTable))
And it ends up looking like this:
Note that the Store Number is selected, but the Store Region is not, it's just the result of cross-filtering. Regional Sales incorrectly matches National Sales. If I then select the Region, the measures work:
I'm actually using VBA to change the Store Number slicer, as the end users don't want to select the region, then scroll through a list of store numbers. They just want to enter a store number and hit enter. I've tried a few things in DAX and VBA, and failed.
I've got a popular problem so i get a message that server acces denied! ..
But that what is different in my error.... When i use same setting same database and connection string (on MSDE server) there is no problem...
On SQL server i have got windwos authentication but i added all accounts as ASPNET and SA.... and when i try to connect by
RETTO - name of my server
server=RETTO;uid=sa;pwd=password;database=db1;
or by
Integrated Security=SSPIserver=RETTO;uid=RETTOASPNET;database=db1;
I CAN BROWSE RECORDS THERE ARE NO PROBLEMS WITH CONNECTION!!! but when i try to update or iinsert or delete something in database there becomame this error that access denied or server does not exist!!!
PLEASE HELP I'm FIGHTING WITH THAT FOR OVER 5 DAYS!!!
I MADE FOR MY ACCOUNTS (SA, ASPNET) ALL THINGS ALLOWED AS EXECUTING stored procedures.. OR ACCESING datatables with insert delete and update query WHERE IS THE PROBLEM!!!??
I'm having a strange problem with this but I know (and admit) that the problem is on my PC and nowhere else. My firewall was causing a problem because I was unable to PING the database server, switching this off gets a successful PING immediately. The most useful utility to date is running netstat -an in the command window. This illustrates all the connections that are live and ports that are being listed to. I can establish a connection both by running
telnet sql5.hostinguk.net 1433 and
sqlcmd -S sql5.hostinguk.net -U username -P password
See below:
Active Connections
Proto Local Address Foreign Address State
TCP 0.0.0.0:25 0.0.0.0:0 LISTENING
TCP 0.0.0.0:80 0.0.0.0:0 LISTENING
TCP 0.0.0.0:135 0.0.0.0:0 LISTENING
TCP 0.0.0.0:443 0.0.0.0:0 LISTENING
TCP 0.0.0.0:445 0.0.0.0:0 LISTENING
TCP 0.0.0.0:1026 0.0.0.0:0 LISTENING
TCP 0.0.0.0:1433 0.0.0.0:0 LISTENING
TCP 81.105.102.47:1134 217.194.210.169:1433 ESTABLISHED
TCP 81.105.102.47:1135 217.194.210.169:1433 ESTABLISHED
TCP 127.0.0.1:1031 0.0.0.0:0 LISTENING
TCP 127.0.0.1:5354 0.0.0.0:0 LISTENING
TCP 127.0.0.1:51114 0.0.0.0:0 LISTENING
TCP 127.0.0.1:51201 0.0.0.0:0 LISTENING
TCP 127.0.0.1:51202 0.0.0.0:0 LISTENING
TCP 127.0.0.1:51203 0.0.0.0:0 LISTENING
TCP 127.0.0.1:51204 0.0.0.0:0 LISTENING
TCP 127.0.0.1:51206 0.0.0.0:0 LISTENING
UDP 0.0.0.0:445 *:*
UDP 0.0.0.0:500 *:*
UDP 0.0.0.0:1025 *:*
UDP 0.0.0.0:1030 *:*
UDP 0.0.0.0:3456 *:*
UDP 0.0.0.0:4500 *:*
UDP 81.105.102.47:123 *:*
UDP 81.105.102.47:1900 *:*
UDP 81.105.102.47:5353 *:*
UDP 127.0.0.1:123 *:*
UDP 127.0.0.1:1086 *:*
UDP 127.0.0.1:1900 *:*
Both these utilities show as establishing a connection in netstat so I am able to connect the database server every time, this worked throughout yesterday and has continued this morning.
The problem is when I attempt to use SQL Server Management Studio. When I attempt to connect to tcp:sql5.hostinguk.net, 1433 nothing shows in netstat at all. There is an option to encrypt the connection in the connection properties tab in management studio, when I enable this I do get an entry in netstat -an, see below:
TCP 81.105.102.47:1138 217.194.210.169:1433 TIME_WAIT
TCP 81.105.102.47:1139 217.194.210.169:1433 TIME_WAIT
TCP 81.105.102.47:1140 217.194.210.169:1433 TIME_WAIT
Amost as if it's trying the different ports but you get this time_wait thing. The error message is more meaningful and hopefull because I get:
A connection was successfully established with the server, but then an error occurred during the pre-login handshake. (provider: SSL Provider, error: 0 - The certificate chain was issued by an authority that is not trusted.) (.Net SqlClient Data Provider)
I would expect this as the DNS has not been advised to encrypt the conection.
This is much better than the : Login failed for user 'COX10289'. (.Net SqlClient Data Provider) that I get, irrespective of whether I enter a password or not.
This is on a XP machine trying to connect to the remote webhosting company via the internet.
I can ping the server
I have enabled shared memory and tcp/ip in protocols, named pipes and via are disabled
I do not have any aliases set up
No I do not force encryption
I wonder if you have any further suggestions to this problem?
I use the code below for updating data from a AS400 Liked server. I dont understend how the WHERE NOT EXISTS( sections work however usualy they do, in this case it does not andt I can't seem to find out why.
Does anyone see the error?
Thanks
--=========================================
--Create a local temporary table that hold
--all the data from the source table
--=========================================
SELECT * INTO #TEMP FROM dbo.LINK_LTTSTOC
--=========================================
--Remove table entries that are no longer
--needed or that have to be updated
--=========================================
DELETE FROM LTTSTOCK
WHERE NOT EXISTS( SELECT * FROM #TEMP
WHERE LTTSTOCK.WarehouseNo = LTWHLO
AND LTTSTOCK.Location = LTWHSL
AND LTTSTOCK.ItemNo = LTITNO
AND LTTSTOCK.NumberAvail = LTAVAL
)
--=========================================
--Insert data that is missing or that
--needed to be updated and was previously
--deleted
--=========================================
INSERT INTO dbo.LTTSTOCK(WarehouseNo,Location,ItemNo,NumberAvail,rowguid)
SELECT DISTINCT LTWHLO,LTWHSL,LTITNO,LTAVAL, NEWID()
FROM #TEMP
WHERE NOT EXISTS( SELECT * FROM LTTSTOCK
WHERE WarehouseNo = LTWHLO
AND Location = LTWHSL
AND ItemNo = LTITNO
AND NumberAvail = LTAVAL
)
--========================================
--Remove local temporary table.
--========================================
DROP TABLE #TEMP
I have 3 tables...
JobRequirements (A)
JobID int
QualificationTypeID int
EmployeeQualifications (B)
EmployeeID int
QualificationTypeID int
Employee (C)
EmployeeID int
EmployeeName int
I need to return a list of all employees fit for a specific job ... The criteria is that only employees who have all the JobRequirements are returned. So if a job had 3 requirements and the employee had just 2 of those qualifications, they would not be returned. Likewise, the employee might have more qualifications than the job requires, but unless the employee has all the specific qualifications the job requires they are not included. If an employee has all the job qualifications plus they have extra qualifications then they should be returned...
How to only return those records where all the child records are present in the other table..
I'm running a DTS package that works correctly when I do "Execute Package" directly, by right clicking the package.
But, if I schedule the job, it fails.
It's trying to write data to another server, but I can't see why it doesn't work as a scheduled job. I tried changing all the parameters I can think of. I'm no Windows expert, so if you have any ideas, please feel free to explain as if you're talking to a "newbie" (since I am one)
Win 2000, SQL 2000
I am going to tangle with our ERP system for the rest of my natural life, and in so doing, will need to create new SQL queries on an almost-daily basis. Based on the handful of queries that I have created against it so far, I recognize that I need to get better at authoring them.
Towards that end, I was wondering if anyone with a little firmer grasp on the subject could take a look at this query (which works & does exactly what I need it to do) and make suggestions as to what I might have done better/differently.
I've changed the names of everything to make it more comprehensible (I hope).
The query returns one row for each unique record in DetailTable, with data from the SummaryTable and a PartDescription from ThirdTable.
SELECT SummaryTable.RecordID,
SummaryTable.Status,
SummaryTable.CustomerName,
SummaryTable.CustomerNumber,
SummaryTable.OrderNumber,
SummaryTable.AssignedTo,
SummaryTable.ResolvedBy,
SummaryTable.ResolveDate,
SummaryTable.PartNumber,
SummaryTable.PartRevision,
SummaryTable.OrderQuantity,
SummaryTable.IssueCategory,
SummaryTable.IncidentDate,
SummaryTable.InquiryDate,
SummaryTable.IssueClass,
SummaryTable.Severity,
SummaryTable.IssueNumber,
SummaryTable.AuthorizedBy,
SummaryTable.Facility,
DetailTable.AssignedTo,
DetailTable.ActionDate,
DetailTable.ActionBy,
DetailTable.JobNumber,
DetailTable.ActionTaken,
DetailTable.NextAction,
DetailTable.IncidentNotes,
ThirdTable.PartDescription
FROMtheDatabase.dbo.DetailTable
LEFT JOIN
theDatabase.dbo.SummaryTable ON DetailTable.RecordID=SummaryTable.RecordID
LEFT JOIN
theDatabase.dbo.ThirdTable on SummaryTable.PartNumber = ThirdTable.PartNumber
AND SummaryTable.PartRevision = ThirdTable.PartRevision
WHERE (SummaryTable.IssueCategory='1' OR SummaryTable.IssueCategory='2' OR SummaryTable.IssueCategory='3'
OR SummaryTable.IssueCategory='D' OR SummaryTable.IssueCategory='E' OR SummaryTable.IssueCategory='L'
OR SummaryTable.IssueCategory='O' OR SummaryTable.IssueCategory='R' OR SummaryTable.IssueCategory='S'
OR SummaryTable.IssueCategory='V' OR SummaryTable.IssueCategory='X' OR SummaryTable.IssueCategory='Z')
AND SummaryTable.Facility='Default' AND SummaryTable.Status='OPEN'
ORDER BY SummaryTable.RecordID
I have a VB app that loads 9 text files for 8 different products, one product at a time. The user must select the product to import. For each product the application:
1. Copies the 9 text files from the source directory to a "process" directory.
2. Calls a stored procedure that sequentially calls a different SSIS package for each text file.
3. Performs some additional processing.
Here's the problem. For the 7th product in the sequence, at least 2 of the text files are not being loaded, and no error exceptions are being thrown. For the 8th product in the sequence at least one text file is not being loaded. If I comment out the call to the stored proc in VB and run the stored proc manually at that point in the program, all files are processed.
On the text file side, the files are being copied correctly and the read-only flag on the file is not being set. In addition, I can open the files in a text editor without any problem.
I'm totally stumped here, so any helpful advice would be appreciated.
TIA,
Mike
I have an asp.net page that executes a DTS. When I execute that DTS from enterprise manager it takes about 5000 rows from the as400 and insert into sql serverIt works right. but when I execute it from my asp.net page I have this error.Error al procesar DTS TransferirDatos(ExistMP) en el paso DTSStep_DTSActiveScriptTask_1System.Exception: Error al procesar DTS TransferirDatos(ExistMP) en el paso DTSStep_DTSActiveScriptTask_1 at LibreraLentos.exec.ejecuta_SP_EXISTENCIASMP() in C:Documents and SettingsluisvalenMis documentosVisual Studio ProjectsInventariosLentosLibreraLentosexec.vb:line 43 at InventariosLentos.generacionprocesomateriaprima.btnenviar_Click(Object sender, EventArgs e) in C:AplicacionesWebInventariosLentosgeneracionprocesomateriaprima.aspx.vb:line 60LibreraLentos I have this on my ASP page Private Sub btnenviar_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnenviar.Click Try objexecsp.ejecuta_SP_EXISTENCIASMP() lblmensajes.Text = "Proceso generado satisfactoriamente" Catch ex As Exception lblmensajes.Text = ex.Message + ex.GetBaseException.ToString + ex.Source.ToString End Try End Subthis on my Data Classs Public Function ejecuta_SP_EXISTENCIASMP() ' call UpdatePrice using a parameter array of SqlParameter objects Try Dim ejecutardts As New cDTS ejecutardts.EjecutarDTS("TransferirDatos(ExistMP)") Catch ex As Exception Throw ex End Try End FunctionThis is what executes the DTSImports System.Runtime.InteropServicesImports System.Configuration.ConfigurationSettingsImports DTSPublic Class cDTS Public Sub EjecutarDTS(ByVal NombreDTS As String) Dim pkg As New DTS.Package Dim oStep As DTS.Step Try pkg = New DTS.Package 'pkg.LoadFromSQLServer(AppSettings("MED20NT"), AppSettings("user"), AppSettings("pwd"), DTSSQLServerStorageFlags.DTSSQLStgFlag_Default, "", "", "", "pruebaCdr1") pkg.LoadFromSQLServer("MED20NT", "sa", "prueva", DTSSQLServerStorageFlags.DTSSQLStgFlag_Default, "", "", "", NombreDTS, "") pkg.AutoCommitTransaction = True pkg.Execute() For Each oStep In pkg.Steps If oStep.ExecutionResult = DTSStepExecResult.DTSStepExecResult_Failure Then Throw New Exception("Error al procesar DTS " & pkg.Name & " en el paso " & oStep.Name) End If Next Catch ex As System.Runtime.InteropServices.COMException Throw ex Catch ex As Exception Throw ex Finally pkg.UnInitialize() pkg = Nothing End Try End SubEnd Class
View 2 Replies View RelatedCan anyone enlighten me on sqlexpress smo?
I have compiled an exe using vbc running the folloing code
Imports SystemImports Microsoft.SqlServer.Management.SmoImports Microsoft.SqlServer.Management.CommonImports System.IO
Module SMOtest
Sub Main() Try Kill(System.Environment.GetFolderPath Environment.SpecialFolder.ProgramFiles) & " estSMO_BACKUP") Catch End Try Try System.Threading.Thread.Sleep(500) Dim bkpfileName As String = System.Environment.GetFolderPath(Environment.SpecialFolder.ProgramFiles) & " estSMO_BACKUP" Dim backDeviceItem As New BackupDeviceItem(bkpfileName, DeviceType.File) Dim db As String = "test" ' Define and set db Dim bck As New Backup() ' Instantiate a Backup object bck.Action = BackupActionType.Database ' Set Action
bck.BackupSetName = db & "_BackupSet" ' Set Backup
bck.Database = db ' Set Database name property bck.Devices.Add(backDeviceItem)
Dim srv As New Server() ' Instantiate a Server object bck.SqlBackup(srv) ' Invoke Backup object's SqlBackup method Catch End Try End SubEnd Module
This works fine on a win2k dev system though when moving to another win2k system the code will error on non system databases. If db= model,master,tempdb etc it executes fine. When I try to backup a created db (any) I get an error stating the name is not found in sysdatabases.
SELECT name FROM master..sysdatabases
where name not in ('master','tempdb')
shows all the created databases including "test" in this case
keep in mind many recompiles using different db's work fine on one system and not the other. Even restored "test" from a backup from the system with no problems only to have a 3041 error consistently on the other. System databases work fine for all attempts on the offending system.
Any ideas? (the offending system is a SAT raid which has been evil from the get go) corruption seems to be the only conclusion I can reach
Help, I had my entire DB created and when i thought i was done, i upsized to SQL and now almost none of my queries work?
The below works when i remove Distinct, but then i have doubles?
Code:
SELECT DISTINCT
Equip_ProductName.ProductName, Equip_ProductName.ProductInfoID, Equip_ProductName.ProductDesc, Equip_ProductName.ProductSearchTerm,
Equip_ProductName.ProductMore, Equip_ProductName.Visible, Equip_Products.ProductID, Equip_Products.CategoryID
FROM Equip_Products INNER JOIN
Equip_ProductName ON Equip_Products.ProductInfoID = Equip_ProductName.ProductInfoID
WHERE (Equip_ProductName.Visible = 1) AND (Equip_Products.CategoryID = 1)
ORDER BY Equip_ProductName.ProductName
Hi All,
As an accomplished web devver of many years using ASP and ASP.NET in conjunction with Access and SQL Server, I am a bit pedantic on the rules of good data structures.
Specifically the two main rules of data redundancy and normalisation.
The latter dictates at the lowest level that a data table should NOT contain a field that can be gleaned from one or a combination of others.
I have a problem with this now, I am building a betting system which will take the odds given, plus the stake placed and calculate the winnings or losses accordingly.
There is an added complication in that not all profit is calculated the same way, as a horse can also be 'placed' which does the same calculation as for profit, but then quarters it, so one single select statement won't do.
I could calculate this at data entry stage on a per entry basis and simply store in a Profit/Loss field and keep the value for each bet, however I know this is not the correct thing to do!
My other alternative [and the correct method] is to do this calculation at data request time, but that would involve the use of a cursor or loop in the SP.
I am aware of the huge resources a cursor can consume and I am not sure which is worse, using a cursor or ignoring the normalisation procedures.
So the question is this, what would you do here?
Since I may not be the same SQL Server expert as I am a programmer, is there an alternative way of reading all the bets and doing these calcs on SQL server and bang them back to ASP as a self contained recordset with all the profit/losses calculated for each bet?
Each bet as a unique EntryID and there is a field called Result which stores 'Win, Place or Loss' accordingly.
Thanks in advance of any help/opinions.
:)
hi all,
i posted this somewhere else but i think here is the right group.
i have a dts that shld write to a text file located at a mapped drive. i read somewhere that sql job does not recognise mapped drive, so i use UNC path in form \128.1.1.1dtsfile, which dtsfile folder is the shared folder name. i opened the folder permission to everyone.
thats abt the remote server. the sql server i am running is on windows NT, logon using Administrator to local. my sql is SQL 2000. i register the server using sa username. the server agent is start up using System account.
now the problem is when i run the dts interactively/manually, it runs succesfully. but when i run it thru SQL job it says "Access denied". Or full error is like this,
DTSRun: Loading... DTSRun: Executing... DTSRun OnStart: DTSStep_DTSDataPumpTask_1 DTSRun OnError: DTSStep_DTSDataPumpTask_1, Error = -2147467259 (80004005) Error string: Error opening datafile: Access is denied. Error source: Microsoft Data Transformation Services Flat File Rowset Provider Help file: DTSFFile.hlp Help context: 0 Error Detail Records: Error: 5 (5); Provider Error: 5 (5) Error string: Error opening datafile: Access is denied. Error source: Microsoft Data Transformation Services Flat File Rowset Provider Help file: DTSFFile.hlp Help context: 0 DTSRun OnFinish: DTSStep_DTSDataPumpTask_1 DTSRun: Package execution complete. Process Exit Code 1. The step failed.
i really hope and appreciate if someone out there can help me out. thanks!
ps: pls let me know if more clues needed from my environment settings.
Hi
I have a DTS to copy data from Oracle to SQL Server. When I logon to SQL Server box with a userID xxx, I can run the DTS from EM and it works perfectly fine but when I schedule the DTS as job, it fails.
SQL Server agent is running with same account "xxx"
DTS connects to SQL Server with sa authentication
Job owner is same account "xxx"
Job error log
Executed as user: DOMAINNAMExxx. ... Drop table [IFS_PROD].[dbo].[INVENTORY_PART] Step DTSRun OnStart: Drop table [IFS_PROD].[dbo].[PART_CATALOG] Step DTSRun OnStart: Drop table [IFS_PROD].[dbo].[SUPPLIER_INFO] Step DTSRun OnStart: DTSStep_DTSExecuteSQLTask_1 DTSRun OnFinish: Drop table [IFS_PROD].[dbo].[PART_CATALOG] Step DTSRun OnFinish: Drop table [IFS_PROD].[dbo].[INVENTORY_PART] Step DTSRun OnStart: Create Table [IFS_PROD].[dbo].[INVENTORY_PART] Step DTSRun OnStart: Create Table [IFS_PROD].[dbo].[PART_CATALOG] Step DTSRun OnFinish: Drop table [IFS_PROD].[dbo].[SUPPLIER_INFO] Step DTSRun OnFinish: DTSStep_DTSExecuteSQLTask_1 DTSRun OnStart: Create Table [IFS_PROD].[dbo].[SUPPLIER_INFO] Step DTSRun OnStart: Create Table [IFS_PROD].[dbo].[SUPPLIER_INFO_ADDRESS] Step DTSRun OnFinish: Create Table [IFS_PROD].[dbo].[PART_CATALOG] Step DTSRun OnFinish: Create Table [IFS_PROD].[dbo].[INVENTORY_PART] Step DTSRun OnStart... Process Exit Code 6. The step failed.
I copied the DTS to another one and scheduled it
This time I got the error log
Executed as user: DOMAINNAMExxx. ...... DTSRun OnStart: DTSStep_DTSExecuteSQLTask_1 DTSRun OnFinish: DTSStep_DTSExecuteSQLTask_1 DTSRun OnStart: Create Table [IFS_PROD].[dbo].[SUPPLIER_INFO_ADDRESS] Step DTSRun OnFinish: Create Table [IFS_PROD].[dbo].[SUPPLIER_INFO_ADDRESS] Step DTSRun OnStart: Copy Data from SUPPLIER_INFO_ADDRESS to [IFS_PROD].[dbo].[SUPPLIER_INFO_ADDRESS] Step DTSRun OnError: Copy Data from SUPPLIER_INFO_ADDRESS to [IFS_PROD].[dbo].[SUPPLIER_INFO_ADDRESS] Step, Error = -2147467259 (80004005) Error string: Oracle client and networking components were not found. These components are supplied by Oracle Corporation and are part of the Oracle Version 7.3.3 or later client software installation. Provider is unable to function until these components are installed. Error source: Microsoft OLE DB Provider for Oracle Help file: Help context: 0 Error Detail Records: Error: -2147467259 (80004005); Provider Error: 0 (. The step failed.
Please help!
Thanks in advance
Hi,
Is there a better (more elegant) way to build the file name than the following code:
/* File name has format mmddhhmmDX.748 with all time/date values zero padded */
DECLARE @FileName char(14)
DECLARE @out_dte datetime
DECLARE @CharDate char(8)
DECLARE @CharTime char(8)
set @out_dte = '2006-08-03 04:05:12.670'
set @CharDate = convert(char(8),@out_dte,1)
set @CharTime = convert(char(8),@out_dte,8)
set @FileName = substring(@CharDAte,1,2) +
substring(@CharDate,4,2) +
substring(@CharTime,1,2) +
substring(@CharTime,4,2) +
'DX.748'
select @FileName
/* Expected Result: 08030405DX.748 */
My first attempt was this:
DECLARE @FileName char(14)
DECLARE @out_dte datetime
set @out_dte = '2006-08-03 04:05:12.670'
set @FileName = cast(DATEPART(mm,@out_dte) as char(2)) +
cast(DATEPART(dd,@out_dte) as char(2)) +
cast(DATEPART(HH,@out_dte) as char(2)) +
cast(DATEPART(mm,@out_dte) as char(2)) +
'DX.748'
select @FileName
… but then date and time values were left justified spaced filled.
Example output: 8 3 4 8 DX.748
I don't just want to get code that works. I want to learn how to write the best possible code.
Thanks,
Laurie
Hi,
I am having data like this
Studid Date Perf
001 01/01/2008 90
001 02/01/2008 89
001 03/02/2008 91
002 01/01/2008 75
002 02/01/2008 79
002 03/02/2008 69
I gave Perf as PREDICT. When I use the
"SELECT * FROM [Cluster_Model]"
Query I am getting
Perf
82.
Can anyone help me how clustering works? and how to write a Query to group the values here based on StudId?
Hi:
I would like to use sp_start_job to execute a SSIS Package but I am not sure how it works. If there are two requests run the job two times simultaneously or sequentially?
I'm able to execute a package in VS Pro on my machine. However when I upload it to the sql server and try to execute the package directly it fails with:
Error: The product level is insuficient for component "...." (3129)
Error: The product level is insuficient for component "...." (5411)
The first component is a DataReader Source which is consuming an ODBC (Noble Systems ATOMIX Driver) connection and the second component is a DataConversion object. Anyone know why this would work running it on my pc in VS but not when I execute it from SQL on the same machine?
I'm coming from Oracle world and my knowledge about SQL Server is quite limited so I apriori apologize for probably stupid questions
DB version is SQL Server 2005.
The business scenario is - there is search form with many criteria. User may enter very unrestrictive criteria matching probably millions of rows. To prevent that we'd like to show him no more than N rows (N ~200). Any rows matching criteria are good enough, however these FOUND rows we'd like to sort. I do not want to find all potentially X million rows, then sort them and only then show forst N rows.
So in Oracle I know how to do that. I just find N rows in subquery, and then in outer query sort them. So I avoid to find all rows and then sorting millions of rows.
Here is an example:
Code Block
SQL> create table t (id number, data varchar2
Table created.
SQL> insert into t values (1, 'aaa');
1 row created.
SQL> insert into t values (2, 'bbb');
1 row created.
SQL> insert into t values (3, 'ccc');
1 row created.
SQL> select * from (
2 select * from t where rownum <=2)
3 ;
ID DATA
---------- --------------------
1 aaa
2 bbb
SQL> ed
Wrote file afiedt.buf
1 select * from (
2 select * from t where rownum <=2)
3* order by data desc
SQL> /
ID DATA
---------- --------------------
2 bbb
1 aaa
However how can I avoid sort of potential big result in SQL Server? I've searched google but unfortunately found nothing.
I've tried to use both TOP and SET rowcount without success i.e. from these examples I assume that DB will find ALL rows matching where clause then sort them keeping only first N. It seems that order by clause in outer query is pushed into inner query both for top and set rowcount.
Code Block
create table t (id integer, data varchar(20));
insert into t values (1, 'aaa');
insert into t values (2, 'bbb');
insert into t values (3, 'ccc');
select * from (
select top 2 * from t) as q
1 aaa
2 bbb
select * from (
select top 2 * from t) as q
order by data desc
3 ccc
2 bbb
set rowcount 2
select * from (
select * from t) as q
1 aaa
2 bbb
set rowcount 2
select * from (
select * from t) as q
order by data desc
3 ccc
2 bbb
And I'd like to avoid sort because of two reasons:
1) I predict that generally finding all rows will be much more costly than finding just any no more than N
2) Sorting all found rows also probably will be slower than just N (however DB has to find only first N rows, so not ALL rows should be sorted/kept sorted)
Are my concerns reasonable? If yes what can I do to just find N rows and sort only these?
TIA, Gints
Hello,
I have scalar valued function that simply convert a date from UTC to LET by using the .NET functions..
The code is very simple:
Partial Public Class UserFunction
<Microsoft.SqlServer.Server.SqlFunction(isDeterministic:=True, Name:="ConvertLETDatetoUTC")> _
Public Shared Function ConvertLETDatetoUTC(ByVal DateLETFormat As SqlDateTime) As DateTime
' Add your code here
Dim DateLETFormatToConvert As Date
DateLETFormatToConvert = DateLETFormat.Value
Return DateLETFormatToConvert.ToUniversalTime
End Function
End Class
select ConvertLETDatetoUTC('2007-06-25 10:00:00')
Now the problem is that the function works properly on my sql server instanc but in the moment I deploy the same code on the sql server instance on a remote machine the conversion doesn't work that means that date I pass is not converted.
On the SQl server machine there the .net framework 1.1 and 2.0 ...
I really don't know what to check to solve the problem .. some idea?
Thank you
when I try to open wrks, I get something like this... that ?CbFromWz@MWblStrings@@SAHPBG@z could not be found in my dynamic links library WkWbl.dll
I tryed downloadind a new dll file and putting it in windows/system and ms work directory... but it still does not work,,, can anyone help me?
Hi All,
I am using sql server 2005. I stuck out in a strange problem.
I am using view in my stored procedure, when I run the stored procedure some of the rows get skipped out means if select query have to return 10 rows then it is returning 5 rows or any other but not all, also the records displyaing is randomly coming, some time it is displaying reords 12345 next time 5678, other time 2468.
But if I run seperately the querys written in SP then it returns all the rows. Please give me solution why it is happening like this.
There are indexes in the tables.
Once I shrink the database and rebuild the indexes, from then this problem is happening. I have rebuild the indexes several time, also updated the statistics but nothing improving.
But nothing is improving
Hi,
When expoting data from excel to sql server table, using SSIS package, after exporting is done, how would i check source rows are equal to destination rows. If not to throw an error message.
How can we handle transactions in SSIS
1. when some error/something happens during export and the # of rows are not exported fully to destination, how to rollback the transaction in SSIS.
Any sort of help would be highly appreciated.
Thanks,
I have a conditional split in an SSIS package - one split is where if rows are returned according to a specific rule, then insert those rows into to a Recordset Destinationm which points to a variable of Object type.
How I can use this variable to email fellow users. For example, what I would like is if ANY rows are returned to the Object variable (1 or more), then I would like to execute an email SP that we have on our server.
Hi,
When expoting data from excel to sql server table, using SSIS package, after exporting is done, how would i check source rows are equal to destination rows. If not to throw an error message.
Any sort of help would be highly appreciated.
Thanks,
Hello,
I have a survey (30 questions) application in a SQL server db. The application uses several relational tables. The results are arranged so that each answer is on a seperate row:
user1 answer1user1 answer2user1 answer3user2 answer1user2 answer2user2 answer3
For statistical analysis I need to transfer the results to an Excel spreadsheet (for later use in SPSS). In the spreadsheet I need the results to appear so that each user will be on a single row with all of that user's answers on that single row (A column for each answer):
user1 answer1 answer2 answer3user2 answer1 answer2 answer3
How can this be done? How can all answers of a user appear on a single row
Thanx,Danny.
Hi i tried designing a SSIS package which loads only those rows which were different from existing rows in the table , i need to timestamp the existing row with an inactive date when a update of that row is inserted (ex: same studentID )
and the newly inserted row with a insert time stamp
so as to indicate the new row as currently active, in short i need to maintain history and current rows in same table , i tried using slowly changing dimension but could not figure out, anyone experience or knowledge regarding the Data loads please respond.
example of Data would be like
exisiting data
StudentID Name AGE Sex ADDRESS INSERTTIME UPDATETIME
12 DDS 14 M XYZ ST 2/4/06 NULL
14 hgS 17 M ABC ST 3/4/07 NULL
New row to insert would be
12 DDS 15 M DFG ST 4/5/07
the data should reflect
StudentID Name AGE Sex ADDRESS INSERTTIME UPDATETIME
12 DDS 14 M XYZ ST 2/4/06 4/5/07
12 DDS 15 M DFG ST 4/5/07 NULL
14 hgS 17 M ABC ST 3/4/07 NULL
Please provide your input as much as you can even though it might not be a 100% solution.