Command Line Arguments In Debug Mode

Apr 24, 2007

Hi,

I am passing some /SET commands on the command line when I execute packages I created in SSIS and have run from the SQL Server Job manager. When I put these same /SET commands on the command line arguments section of the project properties page I would expect they would be passed into the executed package when it is run thru BIDS. But the variables still have their defined values when the packages executes.



Is there a trick to getting command line arguments to work in the debugger for SSIS/BIDS??


DaveM

View 4 Replies


ADVERTISEMENT

Isql Command Line Arguments

Jun 26, 2000

Does any know of a technique to filter out headers dashes and row count in an output file of an isql result? These switches seem to be available when running as isql/w, but not the command line. The -h-1 argument for no headers had no effect. Thanks in advance. Ron Hurley

View 1 Replies View Related

Passing Command Line Arguments From Visual Studio

Mar 27, 2006

Hi all,Is it possible to pass command line arguments to a package when running it from within VS? I want to set the value of a variable via the commandline, and found that you can to this in DtExec with the "/set Package.Variables[...].Value;..." syntax. According to the docs, you should be able to pass the same argument via the 'CmdLineArguments' property in the 'Properties' dialog of an SSIS project in VS (CmdLineArguments. Run the package with the specified command-line arguments. For information about command-line arguments, see dtexec Utility), but unfortunately, this doesn't seem to work (even though the exact same argument does work when entered in DtExec)

Any help would be greatly appreciated :-)

Steven

View 2 Replies View Related

Can I Run The DTS Migration Wizard From A Command Line In A Non-interactive Mode?

May 18, 2006

I have several DTS packages to migrate and would like to script the migration process rather than interactively migrating one DTS package at a time.

Can this be scripted and if so how?

View 1 Replies View Related

Argument Not Specified For Parameter 'arguments' Of Public Function Select(arguments As System.Web.DatasourceSelect Arguments As Collections Ienumerable

Mar 25, 2007

I have an SqlDataSource control on my aspx page, this is connected to database by a built in procedure that returns a string dependent upon and ID passed in.
 I have the followinbg codewhich is not complet, I woiuld appriciate any help to produce the correct code for the code file
 Function GetCategoryName(ByVal ID As Integer) As String          sdsCategoriesByID.SelectParameters("ID").Direction = Data.ParameterDirection.Input          sdsCategoriesByID.SelectParameters.Item("ID").DefaultValue = 3          sdsCategoriesByID.Select() <<<< THIS LINE COMES UP WITH ERROR 1End Function
ERROR AS FOLLOWS
argument not specified for parameter 'arguments' of public function Select(arguments as System.Web.DatasourceSelect Arguments as Collections ienumerable
 
Help I have not got much more hair to loose
Thanks Steve

View 5 Replies View Related

Package Cancels In Debug Mode

Oct 10, 2007

I'm having problems getting a package that I'm trying to develop to run consistently.

This package is using and IBM OLE DB Provider for DB2 connection manager to move data from a remote DB2 for Windows source to a Native OLE DBSQL Native Client connection manger for a SQL 2005 destination.

Sometimes the package works. Sometimes it doesn't. When it doesn't, a command window briefly flashes in Visual Studio before execution "completes". There are no error messages even though the job aborts and no data is moved. The only indication of failure is that the data flow task never changes to green and the output reports that the package was "Canceled". Here's the debug output I'm getting:


Information: 0x40016041 at Integrity_Report_ABD: The package is attempting to configure from the XML file "O:JrsfilesScriptsSSISConfigDB.dtsConfig".

Information: 0x40016040 at Integrity_Report_ABD: The package is attempting to configure from SQL Server using the configuration string ""SSISConfiguration";"[dbo].[SSISConfigurations]";"DMS.EDW.EtlData";".

Information: 0x40016040 at Integrity_Report_ABD: The package is attempting to configure from SQL Server using the configuration string ""SSISConfiguration";"[dbo].[SSISConfigurations]";"FG.DCS.ABD";".

SSIS package "Integrity_Report_ABD.dtsx" starting.

Information: 0x4004300A at Data Flow Task, DTS.Pipeline: Validation phase is beginning.

Information: 0x4004300A at Data Flow Task, DTS.Pipeline: Validation phase is beginning.

Information: 0x40043006 at Data Flow Task, DTS.Pipeline: Prepare for Execute phase is beginning.

Information: 0x40043007 at Data Flow Task, DTS.Pipeline: Pre-Execute phase is beginning.

SSIS package "Integrity_Report_ABD.dtsx" finished: Canceled.

This is the first time we've tried to connect to our WinDB2 servers with SSIS. I'm thinking that I may need to move away from this type of connection and revert back to something like ODBC.

Thoughts?

Thanks,
Bryan

View 8 Replies View Related

Ex.Message In Debug Mode Is Much Shorter

Jan 8, 2007

Exception ex.Message I am getting in debug mode calling AcquireConnection is much shorter than the logged message in run time because all the errors come to output window in debug. Is there any way to get all these errors description from exception object in debug time to be able to parse it?
Thanks.

View 5 Replies View Related

Execute Mutiple Tasks In Debug Mode

Apr 7, 2006

Maybe I'm missing something, but I can't find how to run multiple tasks in sequence while in Visual Studio debug mode. In DTS design mode I grew accustomed to right-clicking tasks one-at-a time, but in SSIS I find the additional step of having to exit Debugging mode after every task gets old after a while.

There must be a way to start execution at a certain task and have the package continue all the way to some other specified task. It would also be nice to have every task in a Group execute in sequence and stop (even if connections continue beyond the group). I could even settle for repeatedly clicking the Continue button in Debug mode, but it's always grayed out when the current task is finished!

Can this be achieved by setting breakpoints?

View 3 Replies View Related

BCP Command With Arguments Having Special Chars

Jul 20, 2005

Hi all,The command is as follows:BCP asdos+_reports..StageCONTACTINFO OUT C:16E8.tmp -w -b10000 -t"|" -r-Sblrkec28791dsqlserver -Uadmin -Padmin -eC:ERRCONTACTINFO.txtHere, since the first argument(database name) has a special char '+' init, the command gives a syntax error. How can i escape it? Double quotes"",[] didnt work!! Pls help!TIA

View 1 Replies View Related

Why Do All Packages In The Project Open When Running One In Debug Mode?

Feb 7, 2006

Does anyone know why this happens? When I run one of the packages in my project (by hitting the play button in the designer), all of the other packages in that project open before it starts running?

Thank you.

View 6 Replies View Related

Bug? Wrong Count In The Data Flow Task In Debug Mode

Mar 10, 2008

I just had this happen twice in a row. The data flow task is showing a number of records almost twice as high as the actual data that is going into the table. This happened to me in two different DFT's with different data.

I am using an OLEDB source which uses a query something like:

select * from functiona()

In the DataFlowTask I see it had around 400,000 Rows go through the path all the way to the deastionation..

However I know that isn't right. If I do:

select count(*) from functiona() I get 200000 rows. Now the weird thing is if I check the table that it inserted to, it has the right number of rows, 200,000. (Numbers are not exact).


Anyone else had this happen?

View 6 Replies View Related

Application Crashes When Calling Sql Server Routine In Debug Mode.

Mar 23, 2008

I use Microsof Visual Studio 2005 to write a c# aplication for my compact device (Dell Axim).
I also use Sql Server Compact Edition to handle my database.
Everything worked OK but suddenly I get an exception on the first call to fill command of a table in my database (Any table) This exception is happenning only when I debug the application if i run the application without debug everything is workink OK.
The exception details are :

System.Data.SqlServerCe.SqlCeException was unhandled
Message="Unspecified error [ sqlceqp30.dll ]"
HResult=-2147467259
NativeError=25123
Source="SQL Server Compact Edition ADO.NET Data Provider"
StackTrace:
at System.Data.SqlServerCe.SqlCeConnection.ProcessResults()
at System.Data.SqlServerCe.SqlCeConnection.Open()
at System.Data.SqlServerCe.SqlCeConnection.Open()
at System.Data.Common.DbDataAdapter.QuietOpen()
at System.Data.Common.DbDataAdapter.FillInternal()
at System.Data.Common.DbDataAdapter.Fill()
at System.Data.Common.DbDataAdapter.Fill()
at Ness300.NessDBDataSetTableAdapters.UsersTableAdapter.Fill()
at Ness300.LoginPanel.DoLogin()
at Ness300.LoginPanel.OKButton_Click()
at NL300Controls.BmpButton.L300Button_MouseUp()
at System.Windows.Forms.Control.OnMouseUp()
at System.Windows.Forms.Control.WnProc()
at System.Windows.Forms.ContainerControl.WnProc()
at System.Windows.Forms.Control._InternalWnProc()
at Microsoft.AGL.Forms.EVL.EnterMainLoop()
at System.Windows.Forms.Application.Run()
at Ness300.Program.Main()

I tried to run the application from the mobile device in order to connect to it doing "Attch to running process" from visual studio.
But just running the application on the device with the resgistry value:
HKEY_LOCAL_MACHINESOFTWAREMicrosoft.NETCompactFrameworkManaged DebuggerAttachEnabled
set to 1 caused the crash when I set it back to 0 everything works fine.
It worked for me before I do not know what happened.
Is it a security problem ?

Can any one helpi me with this because this problem do not give me a way to debug my application.

View 3 Replies View Related

Error Description Differs When Logged With Redirect Rows Compared With Debug Mode

Jan 18, 2007

Hi,

Can any one please tell me how to get the complete error description for example when i dont Redirect Row for Error in OLEDB Source i get a detailed error message with column name as

[RCheck [385]] Error: There was an error with input column "CHECK_STATUS" (456) on input "OLE DB Destination Input" (398). The column status returned was: "The value could not be converted because of a potential loss of data.".


But when I set Redirect Row for error and use the Script component to log them into a Table with ErrorDescription based on ErrorColumnID it only gives me this.

The data value cannot be converted for reasons other than sign mismatch or data overflow.



Thanks

Sat

View 1 Replies View Related

Visual Studio Output Information In Debug Mode While Running A SSIS Package

Aug 16, 2006

Hello

When running a package in VS you can see something like this in the output window:

SSIS package "logging.dtsx" starting.
Information: 0x40043006 at Data Flow Task, DTS.Pipeline: Prepare for Execute phase is beginning.
Information: 0x40043007 at Data Flow Task, DTS.Pipeline: Pre-Execute phase is beginning.
Information: 0x402090DC at Data Flow Task, Flat File Source [1]: The processing of file "C: est ssis loggingad_data1.txt" has started.
Information: 0x4004300C at Data Flow Task, DTS.Pipeline: Execute phase is beginning.
Warning: 0x8020200F at Data Flow Task, Flat File Source [1]: There is a partial row at the end of the file.
Information: 0x402090DE at Data Flow Task, Flat File Source [1]: The total number of data rows processed for file "C: est ssis loggingad_data1.txt" is 477.
Information: 0x402090DF at Data Flow Task, OLE DB Destination [1011]: The final commit for the data insertion has started.
Information: 0x402090E0 at Data Flow Task, OLE DB Destination [1011]: The final commit for the data insertion has ended.
Information: 0x40043008 at Data Flow Task, DTS.Pipeline: Post Execute phase is beginning.
Information: 0x402090DD at Data Flow Task, Flat File Source [1]: The processing of file "C: est ssis loggingad_data1.txt" has ended.
Information: 0x40043009 at Data Flow Task, DTS.Pipeline: Cleanup phase is beginning.
Information: 0x4004300B at Data Flow Task, DTS.Pipeline: "component "DataReaderDest" (87)" wrote 0 rows.
Information: 0x4004300B at Data Flow Task, DTS.Pipeline: "component "OLE DB Destination" (1011)" wrote 1 rows.
SSIS package "logging.dtsx" finished: Success.

This is exactly when I need when a package is running but I want to be able to see it without using Visual Studio.
I would do it in Reporting Services but I need to find out to get the information. The SSIS logging feature in a package does not provide that kind of info.

Did someone try this already?

Thanks!

Mop

View 6 Replies View Related

SSIS Project Running In Debug Mode Brings Up The Wrong Script Task In The Debugger

Mar 12, 2008



This would actually be funny if I weren't under serious time constraints right now. I have an SSIS project with several script tasks in the control flow. I put breakpoints in one of them to allow me to step through and see whats going on. However, when I start the project, the IDE brings up the script editor for a different script task. The breakpoints in this task are actually on the same line numbers as the task I need to debug but the code is all wrong. I checked the task for which the code is being displayed and there are no breakpoints there.

Thanks for the assist!

Don

View 11 Replies View Related

Data Source Name Not Found And No Default Driver Specified - When The Website Was Published , But Not Error When I Run It In Debug Mode(VS.NET 2005)

Oct 30, 2006

ERROR [IM002] [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.Odbc.OdbcException: ERROR [IM002] [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specifiedSource Error: An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below. Stack Trace: [OdbcException (0x80131937): ERROR [IM002] [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified]
System.Data.Odbc.OdbcConnection.HandleError(OdbcHandle hrHandle, RetCode retcode) +35
System.Data.Odbc.OdbcConnectionHandle..ctor(OdbcConnection connection, OdbcConnectionString constr, OdbcEnvironmentHandle environmentHandle) +131
System.Data.Odbc.OdbcConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningObject) +98
System.Data.ProviderBase.DbConnectionFactory.CreateNonPooledConnection(DbConnection owningConnection, DbConnectionPoolGroup poolGroup) +27
System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) +47
System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) +105
System.Data.Odbc.OdbcConnection.Open() +37
DBConnection.open() +12
ASP.global_asax.Session_Start(Object sender, EventArgs e) +35
System.Web.SessionState.SessionStateModule.RaiseOnStart(EventArgs e) +2163182
System.Web.SessionState.SessionStateModule.CompleteAcquireState() +154
System.Web.SessionState.SessionStateModule.BeginAcquireState(Object source, EventArgs e, AsyncCallback cb, Object extraData) +542
System.Web.AsyncEventExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() +90
System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) +155
Version Information: Microsoft .NET Framework Version:2.0.50727.42; ASP.NET Version:2.0.50727.42  ODBC version 3.526.1830.0strconn = "DSN=testserver;uid=tester;pwd=tester;DATABASE=Test_Database"I've  Test_Database on 2 machines (same data in both machines), one is in SQL 2005 server and another one is in SQL 2000 server.When the website was published, it can't work. (with both database). But it work in debug mode in Visual Studio2005.The website can't work when use ODBC connection  but it work when use SqlClient.Help me solve this problem please. T_T  Thanks in advance,

View 8 Replies View Related

Command Line

Jul 23, 2005

Using Query Analyzer, I can right click on an object and select "scriptobject to new window as create" and I get the text of the object'sdefinition (schema). Can I get same result from command line, i.e., fromosql, I can get text output for the definition of the object (something likedefncopy under Sybase)? If so, what is the command or store procedure name?Thanks in advance.

View 2 Replies View Related

Command Line For SQL?

Apr 2, 2008

Is there any command line that I can use to do select from databases (SQL 2005)

View 4 Replies View Related

Automating Ftp Command Line

May 1, 2001

hi I would appreciate if someone demonstrate how to automate ftp in a command line from within a batch file. I do want to move certain files from one server to another via ftp command line in an automatic fashion via running the batch periodically.

thanks

Ali

View 1 Replies View Related

URGENT: Can&#39;t Run BCP Via Command Line

Jun 13, 2000

hi: I can't seem to run BCP thru the command line.

bcp pubs..authors out c:authors.txt -c -Usa -P

error:
Msg 170, Level 15, State 1, Server Y47SA, Procedure , Line 1
[Microsoft][ODBC SQL Server Driver][SQL Server]Line 1: Incorrect syntax near'.'.

I've been trying to run BCP thru command line all day. I tried OSQL, ISQL. I find this utility very
frustrating. btw - I have installed SP2.

any thoughts would be much appreciated.
TIA
deanna

View 5 Replies View Related

Command Line Tools

Sep 25, 2002

Anyone know where I can find some command line tools such as RCMD etc.. Thank you.;)

View 1 Replies View Related

Command Line And Insert

Sep 22, 2005

I'm trying to insert into a table 2 values one of which is an

exec master..xp_cmdshell @command where I have assigned @command with a value

this statement gives me the result into a 1 col. table fine:

insert into mytable99(col1) exec master..xp_cmdshell @command

now what I want to do is put col2 in there as well!!

ie. insert into mytable99(col1,col2) values (exec master..xp_cmdshell @command, '123')

I get a sytax error ... on the exec ??

Could anyone help re the proper way of doing this ... thanks in advance

View 1 Replies View Related

MS SQL Command Line Insert

Oct 13, 2005

I use a similar command below to insert into a temp table the result of a large command line call to an exectable with many parameters passed in the command of which the result passed back contains many items. I then parse the response string to get my results...

set @command = 'dir'
insert into tsverisign(response) exec master..xp_cmdshell @command


My question is our can I insert two values at the same time to this same table one of which is my "exec master..xp_cmdshell @command"

similar to insert into tables (field_a, feild_b) values ('1','2')

Something like (and I know this does not work):

insert into tsverisign(response,trans_id)
values (exec master..xp_cmdshell @command, '123')

Any help would be greatly appreciated .... PS I'm new to MS SQL 2000 and proper syntax etc. etc. so I need full example so I can try. :rolleyes:

View 1 Replies View Related

Creating DB Using Command Line

Jun 11, 2007

Hi All,

I was given a task of coming up with the script to recreate an existing database using a command line. I would use this script in case when the server is down and I can't get to Query Analyzer or EM to recreate it. I am not sure where to start. Any ideas are greatly appreciated.

Thanks.

View 5 Replies View Related

DB Backup From Command Line ?

May 21, 2004

What ius the synthax to backup an SQLServer DB from the command line ?

Thanks

View 1 Replies View Related

Restart SQL Using Command Line

Jan 29, 2008

Can someone give me the command to restart SQL?

Thanks

View 1 Replies View Related

Restore From Command Line

Jul 23, 2005

I want to restore a backup copy of a database from the command line. Canthis be done?Thanks, Tom.

View 2 Replies View Related

Is Any Possible To Run DTS Package From Command Line ?

Jul 20, 2005

Hi Sir:Is any possible to run DTS package from Command Line ?Lucas

View 1 Replies View Related

Command Line Install

May 4, 2007

I am trying to create an quiet install for SQL Server Express. The install is being run under a local administrators account. However, when a user, who is only in the local users group, accesses the application using ClickOnce deplolyment, it says SQL Server Express Edition is not installed.



-Dan

View 1 Replies View Related

How To Set SQL Profiler Via Command Line

Mar 14, 2007

Hello,

How can I set SQL Profiler to capture the logs via command line?

This is what I have:

I already have a SQL Profiler Template (fooTemplate.tdf) which tells what I need SQL to capture.

C:>"C:Program FilesMicrosoft SQL Server90ToolsBinnPROFILER90.EXE" /Sfoo /Dfoo /E /T"c:fooTemplate.tdf" /Oc:mysql.out

What other parameters am I missing?

Thanks!

J

View 3 Replies View Related

COMMAND LINE PARAMETERS

Apr 22, 2008

Hi all,

A quick newbie question...

I am trying to install SQL Server 2005 Standard and upgrade from Express edition. The Edition Change check tells me I must run the setup from the command prompt "and include the SKUUPGRADE=1 parameter", but I don't know how to enter this from the command line.

I've tried "D:setup SKUUPGRADE=1" and "D:setup -SKUUPGRADE=1", as well as "D:setup.exe /SKUUPGRADE=1" without success.

Can anyone give me a clue as to where I'm going wrong?

Thanks in advance.

Slammin!

View 3 Replies View Related

Can't Set Variable Through Command Line

Mar 29, 2007

Hello everyone!

Bit of a problem executing a DTS command from a command line.

I have the following variables defined in my package:

UserVarchar1
UserVarchar2
UserVarchar3

All have a scope of Package, all of the mstrings

The command I'm attempting to run in 1 line is:

DTEXEC /FILE "C:SSIS PackagesED-CustomersPackage.dtsx"
/SET Package.Variables[User::UserVarchar1].value;"10"
/SET Package.Variables[User::UserVarchar2].value;"30719"
/SET Package.Variables[User::UserVarchar3].value;"BILLTO"




Description: The package path referenced an object that cannot be found: "Package.Variables[User::UserVarchar1].value". This occurs when an attempt is made to resolve a package path to an object that cannot be found.


DTExec: Could not set Package.Variables[User::UserVarchar1].value value to 10.

Any idea why?

Thanks for the help!

View 10 Replies View Related

OLE DB Source - Data Access Mode - SQL Command

Feb 14, 2006

I got a package with data flow task. Within the data flow task I have flat file with Fiscal Calendar defined. I got another data source within the data flow task, which is OLE DB Source. I want to use SQL Command as data access mode. SQL similar to one the below is in there.

----------------------------------------------------------------------------------------------------

DECLARE @startdate DATETIME
DECLARE @enddate DATETIME
DECLARE @date DATETIME
DECLARE @id INT

SET @startdate = '1993-09-26' --Change these to
SET @enddate = '2010-09-25' --whatever you want
SET @id = 1
SET @date = DATEADD(dd, @id, @startdate)

WHILE @date <= @enddate
BEGIN
select @date CalendarDate,
DATEPART(dd, @date) CalendarDayMonth,
DATEPART(dy, @date) CalendarDayYear,
DATEPART(dw, @date) CalendarDayWeek,
DATENAME(dw, @date) CalendarDayName

SET @id = @id + 1
SET @date = DATEADD(dd, @id, @startdate)

END

----------------------------------------------------------------------------------------------------

This SQL works fine in SSMS and returns around 6000 rows. But when I plug the same SQL in OLE DB Source it returns only the first record. It is not going through the WHILE loop.

Has anyone came across this?

Thanks

Sutha

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved