I am trying to create an quiet install for SQL Server Express. The install is being run under a local administrators account. However, when a user, who is only in the local users group, accesses the application using ClickOnce deplolyment, it says SQL Server Express Edition is not installed.
-Dan
Hi,
I have a problem about the SP2 installation with using command line in vbscript.
In the vbscript, I use the command line as follow.
'Command line parameters to install SQL Server 2005 Service Pack 2
Set WSHShell = WScript.CreateObject("WScript.Shell")
strAppsp2 = "c:sqlsetupSP2SQLServer2005SP2-x64.exe /Passive /quiet"
WSHShell.Exec(strAppsp2)
set shell = createobject("wscript.shell")
...
But it cannot install the SP2.
Then I tried to test the command line again at the command prompt
c:sqlsetupSP2SQLServer2005SP2-x64.exe /allinstances /passive
After that the SP2 installation box is shown but I need to install in unattend mode.
Would you please suggest me the command line to install the sp2 in unattend mode.
Regard,
Hi there
I've just finished writing a script to install our SSIS packages using dtUtil.exe
We also have a whole bunch of legacy dts packages that we maintain. At the moment we rely on these being manually installed - I'm looking to automate this effort (I'm holding back a rant about 6hr production deployments due to people not being able to follow simple instructions)
Didn't find too much out there on this.. unless I'm missing something obvious, it wouldn't be the first time.
Anyone else out there have a solution to this?
thanks
Greets everyone...
I am using the Command Line to install SQL Server Express (SSE) on client machine. Below is long Command Line we are using.
setup /qb ADDLOCAL=SQL_Engine,Connectivity SQLXML SECURITYMODE=SQL SAPWD=#SmartPlus01# INSTANCENAME=SPSERVER DISABLENETWORKPROTOCOLS=0
When I try to connect to SSE from a client's machine using the 'sa' account, I get a connection failure message. Interesting enough, when I fire up Management Studio, it shows (under the server properities) that the server is still using "Window Authentication". I want to force Mix-mode authentication. According to SQL-BOL I need the SECURITYMODE=SQL and the SAPWD =<StrongPassword> params to use MixMode. Am I missing something in the command line to use MixMode authentication?
Another pair of eyes looking at this would be great.
P.S. Although Windows Authentication is the prefered method, sometimes it just doesn't fit for everything we need to do.
Thanks in advance
-Juan Garcia, MCP
Arbitron, Inc
juan.garcia@arbitron.com
Hi,
I am trying to setup my install script to install SQL Express 2005 using the SQL Security Mode
and setting the SA Password by passing in parameters from the command line.
setup.exe SECURITYMODE=SQL SAPWD="123456"
This runs the install, but still prompts me during the installation to enter an SA Password.
Thanks.
Same problem with
http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=194313&SiteID=1
trying to run ssms.msi failed with code 29506....then i am trying to use command line but i do not know how to do this.
View 4 Replies View RelatedI am trying to push the install for ReportBuilder 3.0 and am having an issue with the REPORTSERVERURL option for installing via command line.I have a batch file that works fine, however when I launch the app it does not have a report server configured. I have verified I can connect to my report server if I enter it manually.
View 3 Replies View RelatedI am using installshield to distribute SQL Server 2005 Express. I have the SQLEXPR.EXE file and I want to run it in /qb mode so the user can see the pretty dialogs pop up but not have to click anything.
View 6 Replies View RelatedUsing Query Analyzer, I can right click on an object and select "scriptobject to new window as create" and I get the text of the object'sdefinition (schema). Can I get same result from command line, i.e., fromosql, I can get text output for the definition of the object (something likedefncopy under Sybase)? If so, what is the command or store procedure name?Thanks in advance.
View 2 Replies View RelatedIs there any command line that I can use to do select from databases (SQL 2005)
View 4 Replies View Relatedhi I would appreciate if someone demonstrate how to automate ftp in a command line from within a batch file. I do want to move certain files from one server to another via ftp command line in an automatic fashion via running the batch periodically.
thanks
Ali
hi: I can't seem to run BCP thru the command line.
bcp pubs..authors out c:authors.txt -c -Usa -P
error:
Msg 170, Level 15, State 1, Server Y47SA, Procedure , Line 1
[Microsoft][ODBC SQL Server Driver][SQL Server]Line 1: Incorrect syntax near'.'.
I've been trying to run BCP thru command line all day. I tried OSQL, ISQL. I find this utility very
frustrating. btw - I have installed SP2.
any thoughts would be much appreciated.
TIA
deanna
Anyone know where I can find some command line tools such as RCMD etc.. Thank you.;)
View 1 Replies View RelatedI'm trying to insert into a table 2 values one of which is an
exec master..xp_cmdshell @command where I have assigned @command with a value
this statement gives me the result into a 1 col. table fine:
insert into mytable99(col1) exec master..xp_cmdshell @command
now what I want to do is put col2 in there as well!!
ie. insert into mytable99(col1,col2) values (exec master..xp_cmdshell @command, '123')
I get a sytax error ... on the exec ??
Could anyone help re the proper way of doing this ... thanks in advance
I use a similar command below to insert into a temp table the result of a large command line call to an exectable with many parameters passed in the command of which the result passed back contains many items. I then parse the response string to get my results...
set @command = 'dir'
insert into tsverisign(response) exec master..xp_cmdshell @command
My question is our can I insert two values at the same time to this same table one of which is my "exec master..xp_cmdshell @command"
similar to insert into tables (field_a, feild_b) values ('1','2')
Something like (and I know this does not work):
insert into tsverisign(response,trans_id)
values (exec master..xp_cmdshell @command, '123')
Any help would be greatly appreciated .... PS I'm new to MS SQL 2000 and proper syntax etc. etc. so I need full example so I can try. :rolleyes:
Hi All,
I was given a task of coming up with the script to recreate an existing database using a command line. I would use this script in case when the server is down and I can't get to Query Analyzer or EM to recreate it. I am not sure where to start. Any ideas are greatly appreciated.
Thanks.
What ius the synthax to backup an SQLServer DB from the command line ?
Thanks
Can someone give me the command to restart SQL?
Thanks
I want to restore a backup copy of a database from the command line. Canthis be done?Thanks, Tom.
View 2 Replies View RelatedHi Sir:Is any possible to run DTS package from Command Line ?Lucas
View 1 Replies View RelatedHello,
How can I set SQL Profiler to capture the logs via command line?
This is what I have:
I already have a SQL Profiler Template (fooTemplate.tdf) which tells what I need SQL to capture.
C:>"C:Program FilesMicrosoft SQL Server90ToolsBinnPROFILER90.EXE" /Sfoo /Dfoo /E /T"c:fooTemplate.tdf" /Oc:mysql.out
What other parameters am I missing?
Thanks!
J
Hi all,
A quick newbie question...
I am trying to install SQL Server 2005 Standard and upgrade from Express edition. The Edition Change check tells me I must run the setup from the command prompt "and include the SKUUPGRADE=1 parameter", but I don't know how to enter this from the command line.
I've tried "D:setup SKUUPGRADE=1" and "D:setup -SKUUPGRADE=1", as well as "D:setup.exe /SKUUPGRADE=1" without success.
Can anyone give me a clue as to where I'm going wrong?
Thanks in advance.
Slammin!
Hello everyone!
Bit of a problem executing a DTS command from a command line.
I have the following variables defined in my package:
UserVarchar1
UserVarchar2
UserVarchar3
All have a scope of Package, all of the mstrings
The command I'm attempting to run in 1 line is:
DTEXEC /FILE "C:SSIS PackagesED-CustomersPackage.dtsx"
/SET Package.Variables[User::UserVarchar1].value;"10"
/SET Package.Variables[User::UserVarchar2].value;"30719"
/SET Package.Variables[User::UserVarchar3].value;"BILLTO"
Description: The package path referenced an object that cannot be found: "Package.Variables[User::UserVarchar1].value". This occurs when an attempt is made to resolve a package path to an object that cannot be found.
DTExec: Could not set Package.Variables[User::UserVarchar1].value value to 10.
Any idea why?
Thanks for the help!
Hey Folks,
I have inherited a project from a co-worker who has had a family tradegy, and I am trying to get up to speed with her project.
We have an SQL server 7 database which is getting backed up every night (by SQL itself) into a .BAK file. I need to know if it is possible to restore this file from the command line (a DOS prompt.) I know (or think I know) how to do it from within SQL Enterprise Manager, however the specific needs of this project require it be done from a command line on the machine.
I really am not an SQL guru...I don't even think I qualify as "knowing what I am doing" at all, so any advice you can offer will be greatly appreciated. This is kind og urgent, so your thoughts are welcome!
Thanks!
Mike
Does any know of a technique to filter out headers dashes and row count in an output file of an isql result? These switches seem to be available when running as isql/w, but not the command line. The -h-1 argument for no headers had no effect. Thanks in advance. Ron Hurley
View 1 Replies View RelatedDoes anyone know how to start sqlserver 7.0 from command line for windows 98?
Thanks
I'm trying to use the rcmd utility and when i try to connect to a server with it i get this error...
system not found or service not active? How do you activate the rcmd service? thanks for your help.
hello to all, and I hope you can help.
this is the code from BOL
dtsrun /Sserver_name /Uuser_nrame /Ppassword /Npackage_name /Mpackage_password /Rrepository_name
I have followed it and come up with ...
dtsrun /SPC-409 /Usa /Pmypassword /Nemployee_export /M? /R?
where can I know the repository_name, is it one of the following:
DTS package
Meta data service package
Meta data
all under Data Transformation Service folder in SQL Server
Thanks
Al
Hi all,
Are there any parameters for the SQLMANGR program???
I need to start it from the install script, and
have it autostart....
I found a single parameter /n that starts
the program without any display -
But I need it to autostart the server service itself,
so i can do some osql stuff after the installtion is completed.
thanks
tony
i have to print Go statement in new line through isql command
my isql command is
isql /Q -SServername -dDatabasename -Usa -PPassword -h-1 -n -q "set nocount on Select ' grant execute on ' + name + ' to user go ' from sysobjects where type = 'U' and name not like 'dt%'" -o SFGRants.sql >> Deploy.log
and out is like
select grant execute tablename to user go
but i want in different format like
select grant execute tablename to user
go
like that
thanking in anticipation
Hi all
I currently have a problem where I need to create a backup from MSSQL, via a command line, ideally from a batch script. This is on a PC. Each machine has SQL Server 2000 on.
I just need to know the code that dos will tell it to run the sql statement. Ideally the command will also give the directory to place the backup.
Regards MiloJ
I want to import a huge .csv file in my sql server database.
There are about 10000 rows and 30 columns
My file looks like this:
Attributname1; Attributname2; Attributname3; ...
data; data; data;...
data; data; data;...
data; data; data;...
Now my idea is to do this on the command line/batch script. I have found different ways to do this job but the problem is i have to create a table in the database first. The entries in the first line of the csv file are the attribute names.
After creating the table with attributes i must write the data in the database.
Hi,
I am executing a package using command line. I want to display messages on the console while the package execute. Which component will I use?
thanks.