Commit And Rollback?
Apr 4, 2007
Hi,
I'm using an SQL Express database over a network, using a C# Express program. So I had to use pure SQL connections and commands instead of using Data Sources (couldn't find a way for it to work). In the program / DB I've got a couple of Master - Detail situations. Something like:
Product:
-----------
productID
(...)
Acessories:
----------------
acessID
(...)
ProductAcess:
--------------------
productID
acessID
So when inserting a new Product, I'll have to first insert the product (with product name, price, and so on) and once I get the product ID from the insert command, I'll insert the ProductAcess rows. I've found a problem in this though. If for some reason the insert of the product is successful, but the insert of ProductAcess fails, I've got a big mess in hands because I'll have a row in Product with no rows in ProductAcess (which shouldn't happen in my program scenario). I could solve this by deleting all rows from the DB which connected in someway to the product that failed to insert, but would be far better and correct if I used a commit command at the end of the insert commands to make sure only the right data would be inserted (saving time and resources). I use this all the time in Oracle databases, but don't know if it is possible in SQL Express... Is it? How? Thanks
View 1 Replies
ADVERTISEMENT
Dec 15, 2007
I have a cursor loop through a set of records that looks something like this.
OPEN database_cursor
FETCH NEXT FROM database_cursor
INTO @iID
WHILE @@FETCH_STATUS = 0
BEGIN
update table 1
update table
......
FETCH NEXT FROM database_cursor
INTO @iID
END
CLOSE database_cursor
DEALLOCATE database_cursor
Is there a way i could put all the UPDATE statements within a transaction. either everything goes or nothing.THnaks
Thanks,
View 3 Replies
View Related
Dec 21, 2007
when doing an 'update table set field1 = 'N',using sql query analyzer, is the update committed immediately? If it isn't commited can a 'rollback' be executed, and what is the format of the rollback command?
View 4 Replies
View Related
Oct 27, 2006
I have several sets of code that need to delete rows from more than one database at a time. The rows are basically linked without being identified as having a foreign key. This means I issue two deletes. If one fails, especially the second one, there is no way to roll the first delete back.Can someone either point me to some code that enables me to link the deletions, allowing me to insure that both are successful or both do not occur. I cannot identify any fields on the secondary database table as specifically linked to the primary, as the secondary database is a storage medium for images, that may be linked to more than one different table.TIA for any opinions, options, etc. Tom
View 2 Replies
View Related
Jun 11, 2002
I first must delete any existing log for my current record.
Then verify that the "exec @res = gmw_updatesynclog..." has not failed and a delete log entry has been successfully written as verified by the gmw_updatesynclog's return of int 16.
If all is well then I incrment my counter and delete the record, here in testing I'm just updateing the activity code to del so I can find them, in live I'll just be deleting them.
--My error
Server: Msg 266, Level 16, State 2, Line 0
Transaction count after EXECUTE indicates that a COMMIT or ROLLBACK TRANSACTION statement is missing. Previous count = 1, current count = 2.
-- end my error
...excerpt from my proc and nested cursor....
------------------------------ begin calls to be deleted
if @rectype = 'C' and (len(rtrim(@notes))<20 or @notes is null)
begin transaction
delete gmtlog -- delete any older del log for this recid
where frecid = @recid
and fieldname = 'zzzDel'
and tableid ='"'
if @@error = 0 -- 0 or 1 rows affected...
exec @res = gmw_updatesynclog 'cal',@recid,'MASTER','D'
if @res <> 16 rollback transaction
goto endd --cleanup and fetch next record
if @res = 16 -- increment count_call_dels
set @count_call_dels = @count_call_dels +1
update cal -- update in test delete in live
set actvcode = 'DEL'
where recid = @recid
commit --transaction
------------------------------ end calls to be
... end excerpt...
TIA
JeffP...
View 2 Replies
View Related
Oct 9, 2000
Hi,
I have a procedure of 6500 lines in which i have given a save point at the beginning of the procedure. And am storing the error number in a variable through out the procedure using select of @@error. And at the end if my @error_number is not zero then am rolling back the tranasction else commit the transaction.
Its giving me the error
Msg 266, Level 16, State 2, Line 5437
Transaction count after execute indicates that a commit or rollback
transaction statement is missing. Previous count = 0, Current count = 1.
View 1 Replies
View Related
Sep 26, 2004
Hi
I have an overnight process that takes transactions from an external system & applies updates to a single db table. Other processes may be active on the db but none touch the tables I'm using. I cannot guarantee the volume of source transactions (may vary from 100s to 100,000s).
My question is should I protect the update within a begin+commit/rollback or should I have a recovery procedure to run in the event of failure (that would delete any rows added to my db table)? (My preference is to do the latter - so I'm really looking for any reasons why I shouldn't take this approach).
Thanks.
View 1 Replies
View Related
Apr 29, 2004
I need a trigger to be fired or a stored procedure to be called on an event of COMMIT or ROLLBACK.
Non of ORACLE, SQL-SERVER, DB2 have this feature.
Please let me know any alternative's
View 2 Replies
View Related
Apr 14, 2008
hi friends,
Iam Executing the sp logic.suppose incase if any problem occurs inbetween execution(NO SPACE,communication failure,log full)
data is getting commited partially insteady of rollbacking entire transaction.
CREATE procedure RBI_Control_sp
as
begin
set nocount on
--Checking the count before truncating
exec fin_ods..count_sp
--Truncating the Table
exec fin_ods..trun_sp
--Data Transfer
exec fin_ods..RBI_Data_Transfer_sp
--Checking the count after Data transfer
exec fin_ods..count_sp
--temp table Table population,Fetching data from the fin_ods[erp Table]
exec FIN_wh..RBI_SPExecution_sp
set nocount off
end
View 3 Replies
View Related
May 12, 2008
Hi
Need a help for the below req.
I have a SP which calls another SP with in a Cursor. The main SP updated two of the DB tables. Based on the data passed from main SP the nested SP updates another two table.
What I want at the end of loop the transaction will be committed. In between if any point it fails means the whole transaction will be rollback.
I am using TRY & CATCH to handle transaction commit & Rollback . But I am getting below error
Error coming in SQL end is:
Transaction count after EXECUTE indicates that a COMMIT or ROLLBACK TRANSACTION statement is missing. Previous count = 1, current count = 0.
Please advise.
View 1 Replies
View Related
Nov 6, 2005
Hi,I still haven't got a decent book on relational databases :-)My stored procedure insert_wire inserts values into two tables (wire andcablewire). The wire_ref (primary key) will be the same for both inserts.However, if for any reason the first insert fails then I would like arollback system to take place. I have tried testing for an error (@@error<> 0) after the 1st transaction but I just get a syntax error. Am I goingdown the right lines here? Any tips appreciated.Thanks, Mary.CREATE procedure insert_wire(in wire_ref VARCHAR(22), in standardVARCHAR(16), in a_color VARCHAR(16), in material VARCHAR(22),in metres INTEGER, in amps FLOAT(3), in volts FLOAT(3), in ni SMALLINT, insome_comment VARCHAR(32))BEGINinsert into cablewirevalues(wire_ref, standard, a_color, material, metres, some_comment);insert into wirevalues(wire_ref, amps, volts, ni);commit;END!
View 1 Replies
View Related
Sep 18, 2007
I have a series of questions about SSIS and transactions. The answers to these questions are probably so obvious that I can't see them, so please feel free to just point out what it is that I'm missing. My transaction-processing experience is very low-level, so I'm probably just not seeing how it's done at the high level of SSIS.
The first question is one that I may know the answer to, so please confirm:
Consider a package with TransactionOption set to Supported. It contains a single Execute SQL Task with TransactionOption set to Required. Is it true that if that Execute SQL Task succeeds, that the transaction commits, and that if the task fails, the transaction rolls back?
Consider another package with TransactionOption set to Supported. It contains a Sequence Container with TransactionOption set to Required. That container contains our same Execute SQL Task, but that is joined to a script task by a "success" precedence constraint. The script task simply returns Dts.Results.Failure. Is it the case that the transaction will roll back? That is, is it truly a simple failure result that would initiate the rollback?
If a DataFlow Task is the one that is set to Required, does that mean that every transactional operation within that task will commit in a single transaction? For instance, if I'm inserting five rows for each input record from a flat file, and if my flat file has 1000 records in it, will I see a single transaction with 5,000 rows?
Thanks for your patience!
View 5 Replies
View Related
May 5, 2008
hi,
I have wriiten the code cn.Open();
SqlCommand CmdInsertAct1 = new SqlCommand("insert into EmpActuals(PayrollGroup,GroupName,PaymentName,PaymentValPer,Percentage) values('" + txtPayBatch.Text.ToString() + "','" + txtPayBactName.Text.ToString() + "','" + txtActName1.Text.ToString() + "','" + txtActAmt1.Text.ToString() + "','" + ddlAct1.SelectedValue + "' )", cn);SqlCommand CmdInsertAct2 = new SqlCommand("insert into EmpActuals(PayrollGroup,GroupName,PaymentName,PaymentValPer,Percentage) values('" + txtPayBatch.Text.ToString() + "','" + txtPayBactName.Text.ToString() + "','" + txtActName2.Text.ToString() + "','" + txtActAmt2.Text.ToString() + "','" + ddlAct2.SelectedItem.Value + "')", cn);
SqlCommand CmdInsertAct3 = new SqlCommand("insert into EmpActuals(PayrollGroup,GroupName,PaymentName,PaymentValPer,Percentage) values('" + txtPayBatch.Text.ToString() + "','" + txtPayBactName.Text.ToString() + "','" + txtActName3.Text.ToString() + "','" + txtActAmt3.Text.ToString() + "','" + ddlAct3.SelectedItem.Value + "')", cn);SqlCommand CmdInsertAct4 = new SqlCommand("insert into EmpActuals(PayrollGroup,GroupName,PaymentName,PaymentValPer,Percentage) values('" + txtPayBatch.Text.ToString() + "','" + txtPayBactName.Text.ToString() + "','" + txtActName4.Text.ToString() + "','" + txtActAmt4.Text.ToString() + "','" + ddlAct4.SelectedItem.Value + "')", cn);
SqlCommand CmdInsertAct5 = new SqlCommand("insert into EmpActuals(PayrollGroup,GroupName,PaymentName,PaymentValPer,Percentage) values('" + txtPayBatch.Text.ToString() + "','" + txtPayBactName.Text.ToString() + "','" + txtActName5.Text.ToString() + "','" + txtActAmt5.Text.ToString() + "','" + ddlAct5.SelectedItem.Value + "')", cn);
CmdInsertAct1.ExecuteNonQuery();
CmdInsertAct2.ExecuteNonQuery();
CmdInsertAct3.ExecuteNonQuery();
CmdInsertAct4.ExecuteNonQuery();
CmdInsertAct5.ExecuteNonQuery();
cn.Close();....................................................................
in this code I want to put Commit,Begin,Rollback Transactions.Plz help me.send replies urgently.
View 3 Replies
View Related
Jun 15, 2008
I have a transaction that calls one other sproc and also executes another set of queries, but for some reason I'm getting error 266: "Msg 266, Level 16, State 2, Procedure AddUserHaveTag, Line 26. Transaction count after EXECUTE indicates that a COMMIT or ROLLBACK TRANSACTION statement is missing. Previous count = 0, current count = 1."There is NO transaction in the sproc AddTag. It is also included below.Here is the sproc with the transaction:1 set ANSI_NULLS ON2 set QUOTED_IDENTIFIER ON
3 go4
5 ALTER PROCEDURE [dbo].[AddUserHaveTag] 6 (7 @UserHaveID int,8 @Tag varchar(24),9 @UserHaveTagExists bit OUTPUT
10 )11 AS12 SET NOCOUNT OFF13 DECLARE @ErrorCode int14 DECLARE @TagID int15 DECLARE @TagExists bit16
17 BEGIN TRAN
18 19 -- Call proc to add tag to Tags table
20 EXEC AddTag @Tag, @TagID OUTPUT, @TagExists OUTPUT
21
22 -- Check for errors
23 IF @ErrorCode <> 0 GOTO ERROR24
25 -- Check for existing record, otherwise insert
26 IF EXISTS (SELECT 1 FROM UserHaveTags WHERE UserHaveID = @UserHaveID AND TagID = @TagID)27 BEGIN28 SET @UserHaveTagExists = 129 RETURN 030 END31 ELSE32 BEGIN33 INSERT INTO UserHaveTags (UserHaveID, TagID) VALUES (@UserHaveID, @TagID)34 SET @UserHaveTagExists = 035 END
36
37 -- Check for errors
38 IF @ErrorCode <> 0 GOTO ERROR39
40 COMMIT TRAN
41
42 ERROR:43 IF (@ErrorCode <> 0)44 BEGIN45 PRINT 'Unexpected error occurred!'
46 ROLLBACK TRAN47 END
Here is the AddTag sproc:1 set ANSI_NULLS ON2 set QUOTED_IDENTIFIER ON
3 go4
5 ALTER PROCEDURE [dbo].[AddTag] 6 (7 @Tag varchar(24),8 @TagID int OUTPUT,9 @TagExists bit OUTPUT
10 )11 AS12 SET NOCOUNT OFF13 14 IF EXISTS (SELECT 1 FROM Tags WHERE Tag = @Tag)15 BEGIN16 SELECT @TagID = TagID FROM Tags WHERE Tag = @Tag17 SET @TagExists = 118 RETURN 019 END20 ELSE21 BEGIN22 INSERT INTO Tags (Tag) VALUES (@Tag)23 SET @TagID = SCOPE_IDENTITY()24 SET @TagExists = 025 ENDAny advice?Also if you see any glaring errors or things I could be doing better, I'm open to suggestions. I'm fairly new to sprocs and transactions. Thanks,Travis
View 4 Replies
View Related
Nov 13, 2007
Hello:
I am implimenting the creation of sequence numbers .I use an insert proc on a table that generates the numbers using an identity field:
procedure usp_createidentity
begin transaction
insert into [tblOrderNumber] with default values
rollback ' done so no records in this table
select @OrderNumber = scope_identity()
I call this from another proc that inserts values into my order table:
procedure usp_Insert @OrderNumber int
as
SET XACT_ABORT ON;
BEGIN TRY
BEGIN TRANSACTION
EXEC usp_GetNewOrderNumber @OrderNumber = @OrderNumber output
INSERT INTO [dbo].[tblOrder] ([OrderNumber]) values (@orderNumber) ' inserts value from other stored proc
COMMIT TRANSACTION
END TRY
BEGIN CATCH
if (XACT_STATE() = -1)
ROLLBACK TRANSACTION
else
if (XACT_STATE() = 1)
COMMIT TRANSACTION
END CATCH
Here is the problem. When I run usp_Insert I get the following: Error 266 Transaction count after EXECUTE indicates that a COMMIT or ROLLBACK TRANSACTION statement is missing. Previous count = 1, current count = 0.
This refers to the usp_GetNewOrderNumber that is called inside the other proc as shown above.
The problem does not happen if I put each statement in usp_Insert in its own try/catch. transaction statements.
Maybe it has something to do with the rollback call in the usp_getneworder.
What do I need to do to get rid of this. problem and still run these within one try/catch trans statement set.
Thanks
View 9 Replies
View Related
Oct 8, 2007
I'm able to connect to the Oracle database to insert the data into multiple tables using OLEDB connection via Oracle Provider for OLEDB. However, i wish to create a transaction so that i'm able to rollback all the data in the case where the insertion fails in one of the table. May i know where should i start from?
View 4 Replies
View Related
Oct 5, 2015
In t-sql 2012, I have the following sql that I would like the following to occur:
1. commit or rollback a transaction based upon the results of a calculation listed below,
2. I would like to have a message appear if the commit was successful or the rollback needed to occur. I basically want a way to be able to tell from messages if a rollback occurred or a commit happened.
DECLARE @TransactionName varchar(20) = 'Transaction1';
@STARTLOCKERCNT INT = 0, @LOCKDIFCNT INT = 0, @ENDLOCKERCNT INT = 0
DECLARE @lockmap TABLE (lockID int NOT NULL PRIMARY KEY,
schoolID int NOT NULL,
UNIQUE(schoolID,lockID)
)
[Code] ....
Thus can you modify the sql I just listed above so that I meet the goals that I just listed above?
View 5 Replies
View Related
Aug 28, 2006
i'm getting following exception when i try to execute stored procedure.{"Ambiguous column name 'MemberID'.
Transaction count after EXECUTE indicates that a COMMIT or ROLLBACK TRANSACTION statement is missing. Previous count = 0, current count = 1." }I know why i'm getting "Ambiguous column name 'MemberID'" exception but i dont know why i'm getting"Transaction count after EXECUTE indicates that......" In my stored proc i'm checking if error occured goto :Error_handler where i do ROLLBACK TRAN/* Its failing at MemberID = tTempResult.MemberID bcoz of Ambiguous column name. I know i have to use RebateInstanceItem.MemberID=tTempResult.MemberID */ here is my stored procCREATE PROCEDURE dbo.ExportFile @intMonth INT, @intYear INT, @dtFirstDayOfMonth DATETIMEAS BEGINBEGIN TRANSACTION /* I have some logic here that will select rows into temporary table #TEMPRESULT */ UPDATE dbo.RebateInstanceItem SET ResubmitCreated = @dtmNewCreated FROM #TEMPRESULT tTempResult WHERE MemberID = tTempResult.MemberID AND RebateInstanceItem.IsResubmit = 'Y' AND (RebateInstanceItem.ResubmitCreated = @dtmLastCreated OR RebateInstanceItem.ResubmitCreated IS NULL) IF @@ERROR<>0 GOTO ERR_HANDLER // when error it will goto error_handler that will rollback DROP TABLE #TEMPRESULT IF @@ERROR<>0 GOTO ERR_HANDLERCOMMIT TRANSACTIONRETURN 0ENDERR_HANDLER: ROLLBACK TRANSACTION RETURN 1GO
View 5 Replies
View Related
Jun 27, 2007
Hello,
First of all, this is my first time using SQL SERVER 2005 express, before that i'm using POSTGRESQL database.
I would like to know how what's the equivalent command for "BEGIN","ROLLBACK","COMMIT", these are the POSTGRESQL COMMAND use to start transaction, rollback transaction and commit transaction.
Example when i use this kind of command is . I need to insert data into 3 table. before insert into table1, i issue "begin", start to insert data into table1, if table1 no error, then i proceed to table 2 and table3. if table2 and table3 no error. then issue "commit" to commit the changes. but if any error happen between table1 and table 2 or table 2 and table3, i will issue "rollback" to roll any changes that i make to table1, table2 and table3.
Maybe some one can teach me how to achieve using SQL SERVER 2005 EXPRESS.
Thanks and Regards.
Beh Chun Yit
View 1 Replies
View Related
Aug 6, 2006
With the function below, I receive this error:Error:Transaction count after EXECUTE indicates that a COMMIT or ROLLBACK TRANSACTION statement is missing. Previous count = 1, current count = 0.Function:Public Shared Function DeleteMesssages(ByVal UserID As String, ByVal MessageIDs As List(Of String)) As Boolean Dim bSuccess As Boolean Dim MyConnection As SqlConnection = GetConnection() Dim cmd As New SqlCommand("", MyConnection) Dim i As Integer Dim fBeginTransCalled As Boolean = False
'messagetype 1 =internal messages Try ' ' Start transaction ' MyConnection.Open() cmd.CommandText = "BEGIN TRANSACTION" cmd.ExecuteNonQuery() fBeginTransCalled = True Dim obj As Object For i = 0 To MessageIDs.Count - 1 bSuccess = False 'delete userid-message reference cmd.CommandText = "DELETE FROM tblUsersAndMessages WHERE MessageID=@MessageID AND UserID=@UserID" cmd.Parameters.Add(New SqlParameter("@UserID", UserID)) cmd.Parameters.Add(New SqlParameter("@MessageID", MessageIDs(i).ToString)) cmd.ExecuteNonQuery() 'then delete the message itself if no other user has a reference cmd.CommandText = "SELECT COUNT(*) FROM tblUsersAndMessages WHERE MessageID=@MessageID1" cmd.Parameters.Add(New SqlParameter("@MessageID1", MessageIDs(i).ToString)) obj = cmd.ExecuteScalar If ((Not (obj) Is Nothing) _ AndAlso ((TypeOf (obj) Is Integer) _ AndAlso (CType(obj, Integer) > 0))) Then 'more references exist so do not delete message Else 'this is the only reference to the message so delete it permanently cmd.CommandText = "DELETE FROM tblMessages WHERE MessageID=@MessageID2" cmd.Parameters.Add(New SqlParameter("@MessageID2", MessageIDs(i).ToString)) cmd.ExecuteNonQuery() End If Next i
' ' End transaction ' cmd.CommandText = "COMMIT TRANSACTION" cmd.ExecuteNonQuery() bSuccess = True fBeginTransCalled = False Catch ex As Exception 'LOG ERROR GlobalFunctions.ReportError("MessageDAL:DeleteMessages", ex.Message) Finally If fBeginTransCalled Then Try cmd = New SqlCommand("ROLLBACK TRANSACTION", MyConnection) cmd.ExecuteNonQuery() Catch e As System.Exception End Try End If MyConnection.Close() End Try Return bSuccess End Function
View 5 Replies
View Related
Mar 28, 2008
Microsoft SQL Server Management Studio Express
select @@trancount
begin tran
select @@trancount
use ProdNetPerfMon
select @@trancount
update Nodes set Caption = 'xxxx' where Vendor = 'yyyy'
select @@trancount
commit tran
select @@trancount
Executes as expected including trancount without errors.
Nodes.Caption is updated but reverts after a few minutes.
sa privileges
What am I missing?
View 1 Replies
View Related
Sep 14, 2004
Do delete/update statements in MS SQL Server need a "commit" (or equivalent) run after them as they do in Oracle?
View 1 Replies
View Related
Jun 8, 1999
Hi ,
I've tried to switch MS-Sql/Server 6.5 on explicit_transactions
without success.
(set implicit_transaction on/off)
What is the exact syntax for doing that ?
Herve
(PS: Thanks Gregory for your quick answer )
View 1 Replies
View Related
Jun 3, 1999
Hi All,
I don't know MS-SQLserver internal system at all. I 've just used Oracle
a couple years ago and so in some cases (e.g using TP-monitor MTS or Tuxedo)
you can switch off the implicit transaction by using
the option AUTOCOMMIT ON/OFF.
How can switch off the implicit transaction system on MS-SQLServer ?
In advance thanks,
Herve
View 1 Replies
View Related
Aug 21, 2002
l also use the
begin transaction
select ........etc
commit
structure when l wrtite queries.My problem is that if l close the query analyser it asks me to commit transaction before l exit. Why?
How do you check for uncommitted trans and commit them?
View 1 Replies
View Related
Aug 17, 2005
I built this in SQL query analyzer to update all records with the 1/1/02 date:
update tbl.EMPPOS set EFFECT_DATE = '2005-01-01'
where EFFECT_DATE = '2002-01-01';
when I run the query it updates and shows records in the lower window, but the tbl isn't altered. What is wrong with my syntax ??
thanks,
View 1 Replies
View Related
Apr 14, 2008
hi friends,
Iam Executing the sp logic.suppose incase if any problem occurs inbetween execution(NO SPACE,communication failure,log full)
data is getting commited partially insteady of rollbacking entire transaction.
CREATE procedure RBI_Control_sp
as
begin
set nocount on
--Checking the count before truncating
exec fin_ods..count_sp
--Truncating the Table
exec fin_ods..trun_sp
--Data Transfer
exec fin_ods..RBI_Data_Transfer_sp
--Checking the count after Data transfer
exec fin_ods..count_sp
--temp table Table population,Fetching data from the fin_ods[erp Table]
exec FIN_wh..RBI_SPExecution_sp
set nocount off
end
View 1 Replies
View Related
Jul 20, 2005
I've a complex stored procedure, that makes a lot of insert, update,delete and so on.I would like to make some commits durint this sp, but of course theyare not "real" commit because who call the sp could decide for arollback.But I know that this commit has to be real. In fact, the transactionlog grows really too much during the execution.Is there a way to force a commit durint a sp ?thank you very much!
View 3 Replies
View Related
Oct 9, 2007
I have an SSIS package that iterates through a thousand or so download text files, parses them and inserts the results into a database via a Stored procedure and an OLE DB Command.
For the most part this process works without any issues, yet I keep obtaining random errors on a DT_STR (500) column. I have reviewed the data extensively and this column - which is the same across all of the rows - does not appear to be any different.
The rest of the rows before and after the error rows all insert properly but these rows consistently fail in the OLE DB task with the following error:
[OLE DB Command [35549]] Error: An OLE DB error has occurred. Error code: 0x80040E14. An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "The incoming tabular data stream (TDS) remote procedure call (RPC) protocol stream is incorrect. The RPC name is invalid.".
When I inserted the rows into an errors table, I found that the error code, -1071607698, is not defined and the only thing I could find online was a reference to:
DTS_E_COMMANDDESTINATIONADAPTERSTATIC_UNAVAILABLE
which appears to be a DTS error and not an SSIS error.
I have added tasks to explicitly verify the length of the field and that field actually inserts without any issues into the error table - which has the exact same column definition as the target table.
I am at a complete loss as to how to proceed - does anybody have an idea?
View 4 Replies
View Related
Jun 15, 2006
How to implement two pase commit in SQL Server 2000, Is there Database Link link Oracle available here ?
View 5 Replies
View Related
Sep 3, 2007
Hi,
My data flow has several transformations:
1. Search an employee, if the employee already exists, update it, otherwise insert it.
2. Once the new employee is created, i have to get its id (with another search transformation )to update another table with it. This id is an autonumeric , thats the reason i have to get it once the record is inserted.
At this momment this second search transformation to get the assigned id for the new reacord doesnt find any employee... i suppose its because these new data is not commited in the database....
the question is, Its possible to force a commit?
Thanks!
View 5 Replies
View Related
Sep 9, 2007
This is a really wide spread - more than a time discussed - on SQL CE MSDN Forums - Issue !!!
Is there any way i can commit changes which happens during runtime (when i am developing the application) such as inserts/updates and deletes to the .sdf DB on the machine ?????
View 34 Replies
View Related
Dec 9, 2006
I use loop to insert few record into a table:But the for_Loop only loop once and throw an error:"The variable name '@res_name' has already been declared. Variable names must be unique within a query batch or stored procedure."What should i do to get this fix?Code:Protected Sub confirm_button_Click(ByVal sender As Object, ByVal e As System.EventArgs)Dim DataSources1 As New SqlDataSource()DataSources1.ConnectionString = ConfigurationManager.ConnectionStrings("ConnectionString").ToString()DataSources1.InsertCommandType = SqlDataSourceCommandType.TextDataSources1.InsertCommand = "INSERT INTO cust_order (res_name, my_menu) VALUES (@res_name, @my_menu)"Dim c As IntegerFor c = 0 To selectListBox.Items.Count - 1 Step +2DataSources1.InsertParameters.Add("res_name", selectListBox.Items(c).Text)DataSources1.InsertParameters.Add("my_menu", selectListBox.Items(c + 1).Text)DataSources1.Insert()Next End Sub
View 2 Replies
View Related
